From 7b304cee16bf87962eba998d8c293e5d4bd23c71 Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Tue, 14 Jan 2020 19:11:47 -0600 Subject: [PATCH] Move configurations to a separate repo --- config/README.md | 3 + config/default/Configuration.h | 2226 ------------- config/default/Configuration_adv.h | 2931 ---------------- .../examples/3DFabXYZ/Migbot/Configuration.h | 2258 ------------- .../3DFabXYZ/Migbot/Configuration_adv.h | 2942 ---------------- config/examples/3DFabXYZ/Migbot/Readme.md | 4 - .../ADIMLab/Gantry v1/Configuration.h | 2227 ------------- .../ADIMLab/Gantry v1/Configuration_adv.h | 2931 ---------------- .../examples/ADIMLab/Gantry v1/_Bootscreen.h | 86 - .../ADIMLab/Gantry v2/Configuration.h | 2227 ------------- .../ADIMLab/Gantry v2/Configuration_adv.h | 2931 ---------------- .../examples/ADIMLab/Gantry v2/_Bootscreen.h | 86 - .../AlephObjects/TAZ4/Configuration.h | 2246 ------------- .../AlephObjects/TAZ4/Configuration_adv.h | 2931 ---------------- .../Alfawise/U20-bltouch/Configuration.h | 2328 ------------- .../Alfawise/U20-bltouch/Configuration_adv.h | 2933 ---------------- .../Alfawise/U20-bltouch/_Statusscreen.h | 77 - config/examples/Alfawise/U20/Configuration.h | 2326 ------------- .../examples/Alfawise/U20/Configuration_adv.h | 2932 ---------------- config/examples/Alfawise/U20/_Statusscreen.h | 77 - .../AliExpress/CL-260/Configuration.h | 2226 ------------- config/examples/AliExpress/CL-260/README.txt | 15 - .../AliExpress/UM2pExt/Configuration.h | 2237 ------------- .../AliExpress/UM2pExt/Configuration_adv.h | 2933 ---------------- config/examples/Anet/A2/Configuration.h | 2228 ------------- config/examples/Anet/A2/Configuration_adv.h | 2931 ---------------- config/examples/Anet/A2plus/Configuration.h | 2228 ------------- .../examples/Anet/A2plus/Configuration_adv.h | 2931 ---------------- config/examples/Anet/A6/Configuration.h | 2343 ------------- config/examples/Anet/A6/Configuration_adv.h | 2931 ---------------- config/examples/Anet/A6/_Statusscreen.h | 56 - config/examples/Anet/A8/Configuration.h | 2254 ------------- config/examples/Anet/A8/Configuration_adv.h | 2931 ---------------- config/examples/Anet/A8/_Statusscreen.h | 56 - config/examples/Anet/A8plus/Configuration.h | 2237 ------------- .../examples/Anet/A8plus/Configuration_adv.h | 2931 ---------------- config/examples/Anet/A8plus/_Statusscreen.h | 66 - config/examples/Anet/E10/Configuration.h | 2229 ------------- config/examples/Anet/E10/Configuration_adv.h | 2931 ---------------- config/examples/Anet/E16/Configuration.h | 2238 ------------- config/examples/Anet/E16/Configuration_adv.h | 2931 ---------------- config/examples/Anet/E16/_Bootscreen.h | 73 - config/examples/Anet/E16/_Statusscreen.h | 83 - .../examples/AnimationExample/_Bootscreen.h | 193 -- config/examples/AnyCubic/i3/Configuration.h | 2236 ------------- .../examples/AnyCubic/i3/Configuration_adv.h | 2931 ---------------- config/examples/ArmEd/Configuration.h | 2227 ------------- config/examples/ArmEd/Configuration_adv.h | 2935 ---------------- .../examples/Artillery/Genius/Configuration.h | 2209 ------------- .../Artillery/Genius/Configuration_adv.h | 2931 ---------------- .../examples/Artillery/Genius/_Bootscreen.h | 93 - .../Artillery/Sidewinder X1/Configuration.h | 2231 ------------- .../Sidewinder X1/Configuration_adv.h | 2931 ---------------- .../Artillery/Sidewinder X1/_Bootscreen.h | 93 - config/examples/Azteeg/X5GT/Configuration.h | 2226 ------------- .../BIBO/TouchX/cyclops/Configuration.h | 2226 ------------- .../BIBO/TouchX/cyclops/Configuration_adv.h | 2931 ---------------- .../BIBO/TouchX/default/Configuration.h | 2226 ------------- .../BIBO/TouchX/default/Configuration_adv.h | 2931 ---------------- config/examples/BQ/Hephestos/Configuration.h | 2214 ------------- .../examples/BQ/Hephestos/Configuration_adv.h | 2931 ---------------- .../examples/BQ/Hephestos_2/Configuration.h | 2227 ------------- .../BQ/Hephestos_2/Configuration_adv.h | 2939 ---------------- config/examples/BQ/Hephestos_2/README.md | 29 - config/examples/BQ/Hephestos_2/_Bootscreen.h | 101 - config/examples/BQ/WITBOX/Configuration.h | 2214 ------------- config/examples/BQ/WITBOX/Configuration_adv.h | 2931 ---------------- .../SKR Mini E3 1.0/Configuration.h | 2218 ------------- .../SKR Mini E3 1.0/Configuration_adv.h | 2931 ---------------- .../SKR Mini E3 1.2/Configuration.h | 2219 ------------- .../SKR Mini E3 1.2/Configuration_adv.h | 2931 ---------------- config/examples/Cartesio/Configuration.h | 2225 ------------- config/examples/Cartesio/Configuration_adv.h | 2931 ---------------- config/examples/Cartesio/_Bootscreen.h | 101 - .../examples/Creality/CR-10/Configuration.h | 2236 ------------- .../Creality/CR-10/Configuration_adv.h | 2934 ---------------- config/examples/Creality/CR-10/_Bootscreen.h | 56 - .../examples/Creality/CR-10/_Statusscreen.h | 66 - .../examples/Creality/CR-10S/Configuration.h | 2227 ------------- .../Creality/CR-10S/Configuration_adv.h | 2931 ---------------- config/examples/Creality/CR-10S/_Bootscreen.h | 56 - .../examples/Creality/CR-10S/_Statusscreen.h | 74 - .../Creality/CR-10_5S/Configuration.h | 2229 ------------- .../Creality/CR-10_5S/Configuration_adv.h | 2931 ---------------- .../examples/Creality/CR-10_5S/_Bootscreen.h | 56 - .../Creality/CR-10mini/Configuration.h | 2245 ------------- .../Creality/CR-10mini/Configuration_adv.h | 2931 ---------------- .../examples/Creality/CR-10mini/_Bootscreen.h | 56 - .../Creality/CR-10mini/_Statusscreen.h | 74 - .../Creality/CR-20 Pro/Configuration.h | 2230 ------------- .../Creality/CR-20 Pro/Configuration_adv.h | 2931 ---------------- .../Creality/CR-20 Pro/_Statusscreen.h | 72 - .../examples/Creality/CR-20/Configuration.h | 2230 ------------- .../Creality/CR-20/Configuration_adv.h | 2931 ---------------- config/examples/Creality/CR-8/Configuration.h | 2236 ------------- .../Creality/CR-8/Configuration_adv.h | 2931 ---------------- .../examples/Creality/Ender-2/Configuration.h | 2230 ------------- .../Creality/Ender-2/Configuration_adv.h | 2931 ---------------- config/examples/Creality/Ender-2/README.md | 33 - .../examples/Creality/Ender-2/_Bootscreen.h | 97 - .../examples/Creality/Ender-2/_Statusscreen.h | 66 - .../examples/Creality/Ender-3/Configuration.h | 2230 ------------- .../Creality/Ender-3/Configuration_adv.h | 2931 ---------------- .../examples/Creality/Ender-3/_Bootscreen.h | 97 - .../examples/Creality/Ender-3/_Statusscreen.h | 62 - .../examples/Creality/Ender-4/Configuration.h | 2236 ------------- .../Creality/Ender-4/Configuration_adv.h | 2931 ---------------- .../Creality/Ender-5 Pro/Configuration.h | 2224 ------------- .../Creality/Ender-5 Pro/Configuration_adv.h | 2931 ---------------- .../Creality/Ender-5 Pro/_Bootscreen.h | 96 - .../Creality/Ender-5 Pro/_Statusscreen.h | 70 - .../examples/Creality/Ender-5/Configuration.h | 2230 ------------- .../Creality/Ender-5/Configuration_adv.h | 2931 ---------------- config/examples/Creality/Ender-5/README.md | 13 - .../examples/Creality/Ender-5/_Bootscreen.h | 96 - .../examples/Creality/Ender-5/_Statusscreen.h | 61 - .../Dagoma/Disco Ultimate/Configuration.h | 2226 ------------- .../Dagoma/Disco Ultimate/Configuration_adv.h | 2931 ---------------- .../Imprimante multifonction/Configuration.h | 2226 ------------- .../Configuration_adv.h | 2927 ---------------- config/examples/Einstart-S/Configuration.h | 2236 ------------- .../examples/Einstart-S/Configuration_adv.h | 2931 ---------------- config/examples/Einstart-S/readme.md | 152 - config/examples/FYSETC/AIO_II/Configuration.h | 2231 ------------- .../FYSETC/AIO_II/Configuration_adv.h | 2931 ---------------- .../Cheetah 1.2/BLTouch/Configuration.h | 2231 ------------- .../Cheetah 1.2/BLTouch/Configuration_adv.h | 2931 ---------------- .../FYSETC/Cheetah 1.2/base/Configuration.h | 2231 ------------- .../Cheetah 1.2/base/Configuration_adv.h | 2931 ---------------- .../FYSETC/Cheetah/BLTouch/Configuration.h | 2231 ------------- .../Cheetah/BLTouch/Configuration_adv.h | 2931 ---------------- .../FYSETC/Cheetah/base/Configuration.h | 2231 ------------- .../FYSETC/Cheetah/base/Configuration_adv.h | 2931 ---------------- config/examples/FYSETC/F6_13/Configuration.h | 2232 ------------- .../examples/FYSETC/F6_13/Configuration_adv.h | 2931 ---------------- config/examples/FYSETC/S6/Configuration.h | 2226 ------------- config/examples/FYSETC/S6/Configuration_adv.h | 2931 ---------------- config/examples/Felix/DUAL/Configuration.h | 2208 ------------ .../examples/Felix/DUAL/Configuration_adv.h | 2931 ---------------- config/examples/Felix/DUAL/README.md | 60 - config/examples/Felix/Single/Configuration.h | 2208 ------------ .../examples/Felix/Single/Configuration_adv.h | 2931 ---------------- config/examples/Felix/Single/README.md | 60 - .../FlashForge/CreatorPro/Configuration.h | 2219 ------------- .../FlashForge/CreatorPro/Configuration_adv.h | 2930 ---------------- .../FlashForge/CreatorPro/CuraSettings.txt | 157 - .../FolgerTech/i3-2020/Configuration.h | 2245 ------------- .../FolgerTech/i3-2020/Configuration_adv.h | 2939 ---------------- .../examples/Formbot/Raptor/Configuration.h | 2345 ------------- .../Formbot/Raptor/Configuration_adv.h | 2935 ---------------- config/examples/Formbot/Raptor/_Bootscreen.h | 94 - .../examples/Formbot/Raptor/_Statusscreen.h | 75 - .../examples/Formbot/T_Rex_2+/Configuration.h | 2279 ------------- .../Formbot/T_Rex_2+/Configuration_adv.h | 2945 ----------------- .../examples/Formbot/T_Rex_2+/_Bootscreen.h | 102 - .../examples/Formbot/T_Rex_2+/_Statusscreen.h | 74 - .../examples/Formbot/T_Rex_3/Configuration.h | 2269 ------------- .../Formbot/T_Rex_3/Configuration_adv.h | 2940 ---------------- config/examples/Formbot/T_Rex_3/_Bootscreen.h | 102 - .../examples/Formbot/T_Rex_3/_Statusscreen.h | 74 - config/examples/Geeetech/A10/Configuration.h | 2211 ------------- .../examples/Geeetech/A10/Configuration_adv.h | 2931 ---------------- config/examples/Geeetech/A10D/Configuration.h | 2210 ------------- .../Geeetech/A10D/Configuration_adv.h | 2931 ---------------- config/examples/Geeetech/A10M/Configuration.h | 2211 ------------- .../Geeetech/A10M/Configuration_adv.h | 2931 ---------------- config/examples/Geeetech/A10T/Configuration.h | 2212 ------------- .../Geeetech/A10T/Configuration_adv.h | 2931 ---------------- config/examples/Geeetech/A20/Configuration.h | 2212 ------------- .../examples/Geeetech/A20/Configuration_adv.h | 2931 ---------------- config/examples/Geeetech/A20M/Configuration.h | 2213 ------------- .../Geeetech/A20M/Configuration_adv.h | 2931 ---------------- config/examples/Geeetech/A20T/Configuration.h | 2214 ------------- .../Geeetech/A20T/Configuration_adv.h | 2931 ---------------- config/examples/Geeetech/A30/Configuration.h | 2214 ------------- .../examples/Geeetech/A30/Configuration_adv.h | 2930 ---------------- config/examples/Geeetech/D200/Configuration.h | 2214 ------------- .../Geeetech/D200/Configuration_adv.h | 2931 ---------------- config/examples/Geeetech/E180/Configuration.h | 2215 ------------- .../Geeetech/E180/Configuration_adv.h | 2930 ---------------- .../examples/Geeetech/GT2560/Configuration.h | 2250 ------------- .../Geeetech/I3_Pro_X-GT2560/Configuration.h | 2226 ------------- config/examples/Geeetech/M201/Configuration.h | 2214 ------------- .../Geeetech/M201/Configuration_adv.h | 2931 ---------------- .../Geeetech/MeCreator2/Configuration.h | 2233 ------------- .../Geeetech/MeCreator2/Configuration_adv.h | 2930 ---------------- .../Geeetech/PI3A PRO/Configuration.h | 2247 ------------- .../Geeetech/PI3A PRO/Configuration_adv.h | 2931 ---------------- .../Prusa i3 Pro B/bltouch/Configuration.h | 2247 ------------- .../Geeetech/Prusa i3 Pro B/bltouch/README.md | 54 - .../Prusa i3 Pro B/noprobe/Configuration.h | 2246 ------------- .../Geeetech/Prusa i3 Pro B/noprobe/README.md | 54 - .../Geeetech/Prusa i3 Pro C/Configuration.h | 2226 ------------- .../Prusa i3 Pro C/Configuration_adv.h | 2931 ---------------- .../Geeetech/Prusa i3 Pro W/Configuration.h | 2226 ------------- .../Prusa i3 Pro W/Configuration_adv.h | 2931 ---------------- config/examples/HMS434/Configuration.h | 2215 ------------- config/examples/HMS434/Configuration_adv.h | 2923 ---------------- .../examples/Infitary/i3-M508/Configuration.h | 2230 ------------- .../Infitary/i3-M508/Configuration_adv.h | 2931 ---------------- config/examples/JGAurora/A1/Configuration.h | 2236 ------------- .../examples/JGAurora/A1/Configuration_adv.h | 2936 ---------------- config/examples/JGAurora/A5/Configuration.h | 2238 ------------- .../examples/JGAurora/A5/Configuration_adv.h | 2931 ---------------- config/examples/JGAurora/A5/README.md | 39 - config/examples/JGAurora/A5S/Configuration.h | 2236 ------------- .../examples/JGAurora/A5S/Configuration_adv.h | 2936 ---------------- .../examples/JGAurora/Magic/Configuration.h | 2226 ------------- .../JGAurora/Magic/Configuration_adv.h | 2931 ---------------- .../MakerFarm/Pegasus_12/Configuration.h | 2231 ------------- .../MakerFarm/Pegasus_12/Configuration_adv.h | 2928 ---------------- config/examples/MakerParts/Configuration.h | 2226 ------------- .../examples/MakerParts/Configuration_adv.h | 2931 ---------------- config/examples/MakerParts/_Bootscreen.h | 81 - config/examples/Malyan/M150/Configuration.h | 2267 ------------- .../examples/Malyan/M150/Configuration_adv.h | 2931 ---------------- config/examples/Malyan/M150/README.md | 55 - config/examples/Malyan/M150/_Bootscreen.h | 71 - config/examples/Malyan/M200/Configuration.h | 2236 ------------- .../examples/Malyan/M200/Configuration_adv.h | 2933 ---------------- config/examples/Malyan/M200/README.md | 33 - .../Micromake/C1/basic/Configuration.h | 2230 ------------- config/examples/Micromake/C1/basic/README.md | 15 - .../Micromake/C1/enhanced/Configuration.h | 2230 ------------- .../Micromake/C1/enhanced/Configuration_adv.h | 2931 ---------------- .../examples/Micromake/C1/enhanced/README.md | 15 - config/examples/Mks/Robin/Configuration.h | 2235 ------------- config/examples/Mks/Robin/Configuration_adv.h | 2931 ---------------- .../examples/Mks/Robin_Lite3/Configuration.h | 2233 ------------- config/examples/Mks/Robin_Lite3/ReadMe.txt | 5 - config/examples/Mks/Robin_Pro/Configuration.h | 2232 ------------- config/examples/Mks/Robin_Pro/ReadMe.txt | 4 - config/examples/Mks/Sbase/Configuration.h | 2226 ------------- config/examples/Mks/Sbase/Configuration_adv.h | 2932 ---------------- config/examples/Mks/Sbase/README.txt | 38 - config/examples/Modix/Big60/Configuration.h | 2226 ------------- .../examples/Modix/Big60/Configuration_adv.h | 2931 ---------------- config/examples/Modix/Big60/_Bootscreen.h | 91 - config/examples/Modix/Big60/_Statusscreen.h | 60 - .../Printrbot/PrintrboardG2/Configuration.h | 2231 ------------- .../examples/RapideLite/RL200/Configuration.h | 2226 ------------- .../RapideLite/RL200/Configuration_adv.h | 2931 ---------------- .../examples/Renkforce/RF100/Configuration.h | 2234 ------------- .../Renkforce/RF100/Configuration_adv.h | 2931 ---------------- .../Renkforce/RF100XL/Configuration.h | 2234 ------------- .../Renkforce/RF100XL/Configuration_adv.h | 2931 ---------------- .../Renkforce/RF100v2/Configuration.h | 2234 ------------- .../Renkforce/RF100v2/Configuration_adv.h | 2931 ---------------- .../examples/RepRapPro/Huxley/Configuration.h | 2275 ------------- .../RepRapWorld/Megatronics/Configuration.h | 2226 ------------- config/examples/RigidBot/Configuration.h | 2226 ------------- config/examples/RigidBot/Configuration_adv.h | 2931 ---------------- .../examples/SCARA/MP_SCARA/Configuration.h | 2248 ------------- .../SCARA/MP_SCARA/Configuration_adv.h | 2928 ---------------- config/examples/SCARA/Morgan/Configuration.h | 2248 ------------- .../examples/SCARA/Morgan/Configuration_adv.h | 2928 ---------------- .../STM32/Black_STM32F407VET6/Configuration.h | 2226 ------------- .../Black_STM32F407VET6/Configuration_adv.h | 2931 ---------------- .../STM32/STM32F103RE/Configuration.h | 2228 ------------- config/examples/STM32/STM32F4/Configuration.h | 2226 ------------- .../STM32/stm32f103ret6/Configuration.h | 2228 ------------- config/examples/Sanguinololu/Configuration.h | 2257 ------------- .../examples/Sanguinololu/Configuration_adv.h | 2931 ---------------- .../Tevo/Michelangelo/Configuration.h | 2231 ------------- .../Tevo/Michelangelo/Configuration_adv.h | 2931 ---------------- .../examples/Tevo/Michelangelo/_Bootscreen.h | 83 - config/examples/Tevo/Nereus/Configuration.h | 2210 ------------- .../examples/Tevo/Nereus/Configuration_adv.h | 2931 ---------------- config/examples/Tevo/Nereus/_Bootscreen.h | 90 - .../Tevo/Tarantula Pro/Configuration.h | 2231 ------------- .../Tevo/Tarantula Pro/Configuration_adv.h | 2931 ---------------- .../examples/Tevo/Tarantula Pro/_Bootscreen.h | 80 - .../Tornado/V1 (MKS Base)/Configuration.h | 2231 ------------- .../Tornado/V1 (MKS Base)/Configuration_adv.h | 2931 ---------------- .../Tornado/V2 (MKS GEN-L)/Configuration.h | 2234 ------------- .../V2 (MKS GEN-L)/Configuration_adv.h | 2931 ---------------- config/examples/Tevo/Tornado/_Bootscreen.h | 85 - config/examples/TheBorg/Configuration.h | 2226 ------------- config/examples/TheBorg/Configuration_adv.h | 2931 ---------------- config/examples/TinyBoy2/Configuration.h | 2282 ------------- config/examples/TinyBoy2/Configuration_adv.h | 2931 ---------------- config/examples/Tronxy/X1/Configuration.h | 2226 ------------- config/examples/Tronxy/X3A/Configuration.h | 2230 ------------- .../examples/Tronxy/X3A/Configuration_adv.h | 2931 ---------------- config/examples/Tronxy/X5S-2E/Configuration.h | 2247 ------------- .../Tronxy/X5S-2E/Configuration_adv.h | 2931 ---------------- config/examples/Tronxy/X5S/Configuration.h | 2226 ------------- config/examples/Tronxy/XY100/Configuration.h | 2237 ------------- .../UltiMachine/Archim1/Configuration.h | 2226 ------------- .../UltiMachine/Archim1/Configuration_adv.h | 2931 ---------------- .../UltiMachine/Archim2/Configuration.h | 2226 ------------- .../UltiMachine/Archim2/Configuration_adv.h | 2931 ---------------- config/examples/VORONDesign/Configuration.h | 2235 ------------- .../examples/VORONDesign/Configuration_adv.h | 2931 ---------------- config/examples/VORONDesign/_Bootscreen.h | 82 - .../examples/Velleman/K8200/Configuration.h | 2261 ------------- .../Velleman/K8200/Configuration_adv.h | 2944 ---------------- config/examples/Velleman/K8200/README.md | 20 - .../Velleman/K8400/Dual-head/Configuration.h | 2227 ------------- .../K8400/Dual-head/Configuration_adv.h | 2931 ---------------- .../Velleman/K8400/Dual-head/README.md | 15 - .../K8400/Single-head/Configuration.h | 2227 ------------- .../K8400/Single-head/Configuration_adv.h | 2931 ---------------- .../Velleman/K8400/Single-head/README.md | 15 - .../examples/WASP/PowerWASP/Configuration.h | 2245 ------------- .../WASP/PowerWASP/Configuration_adv.h | 2931 ---------------- config/examples/WASP/PowerWASP/README.md | 72 - .../Wanhao/Duplicator 6/Configuration.h | 2237 ------------- .../Wanhao/Duplicator 6/Configuration_adv.h | 2933 ---------------- .../Duplicator i3 2.1/Chippy_Bootscreen.h | 74 - .../Wanhao/Duplicator i3 2.1/Configuration.h | 2237 ------------- .../Duplicator i3 2.1/Configuration_adv.h | 2931 ---------------- .../Wanhao/Duplicator i3 2.1/README.md | 21 - .../Wanhao/Duplicator i3 2.1/_Bootscreen.h | 72 - .../Wanhao/Duplicator i3 Mini/Configuration.h | 2226 ------------- .../Duplicator i3 Mini/Configuration_adv.h | 2931 ---------------- .../Wanhao/Duplicator i3 Mini/_Bootscreen.h | 53 - .../examples/adafruit/ST7565/Configuration.h | 2226 ------------- .../delta/Anycubic/Kossel/Configuration.h | 2394 -------------- .../delta/Anycubic/Kossel/Configuration_adv.h | 2933 ---------------- .../examples/delta/Anycubic/Kossel/README.md | 50 - .../Anycubic/Kossel/images/Version1Probe.jpg | Bin 94933 -> 0 bytes .../Anycubic/Kossel/images/Version2Probe.jpg | Bin 51853 -> 0 bytes .../delta/Dreammaker/Overlord/Configuration.h | 2334 ------------- .../Dreammaker/Overlord/Configuration_adv.h | 2932 ---------------- .../delta/Dreammaker/Overlord/_Bootscreen.h | 35 - .../Dreammaker/Overlord_Pro/Configuration.h | 2345 ------------- .../Overlord_Pro/Configuration_adv.h | 2933 ---------------- .../Dreammaker/Overlord_Pro/_Bootscreen.h | 35 - .../examples/delta/FLSUN/QQ-S/Configuration.h | 2336 ------------- .../delta/FLSUN/QQ-S/Configuration_adv.h | 2933 ---------------- .../FLSUN/auto_calibrate/Configuration.h | 2338 ------------- .../FLSUN/auto_calibrate/Configuration_adv.h | 2933 ---------------- .../delta/FLSUN/kossel/Configuration.h | 2337 ------------- .../delta/FLSUN/kossel/Configuration_adv.h | 2933 ---------------- .../delta/FLSUN/kossel_mini/Configuration.h | 2337 ------------- .../FLSUN/kossel_mini/Configuration_adv.h | 2933 ---------------- .../delta/Geeetech/G2Pro/Configuration.h | 2332 ------------- .../delta/Geeetech/G2Pro/Configuration_adv.h | 2929 ---------------- .../Geeetech/Rostock 301/Configuration.h | 2326 ------------- .../Geeetech/Rostock 301/Configuration_adv.h | 2933 ---------------- .../delta/Hatchbox_Alpha/Configuration.h | 2353 ------------- .../examples/delta/MKS/SBASE/Configuration.h | 2325 ------------- .../delta/MKS/SBASE/Configuration_adv.h | 2933 ---------------- .../RRD Full Graphic Smart Controller.md | 34 - .../delta/Tevo Little Monster/Configuration.h | 2329 ------------- .../Tevo Little Monster/Configuration_adv.h | 2933 ---------------- config/examples/delta/generic/Configuration.h | 2325 ------------- .../delta/generic/Configuration_adv.h | 2933 ---------------- .../delta/kossel_clear/Configuration.h | 2331 ------------- .../delta/kossel_clear/Configuration_adv.h | 2933 ---------------- .../delta/kossel_mini/Configuration.h | 2327 ------------- .../delta/kossel_mini/Configuration_adv.h | 2933 ---------------- .../examples/delta/kossel_pro/Configuration.h | 2327 ------------- config/examples/delta/kossel_pro/README.md | 5 - .../examples/delta/kossel_xl/Configuration.h | 2328 ------------- .../delta/kossel_xl/Configuration_adv.h | 2933 ---------------- config/examples/delta/kossel_xl/README.md | 21 - .../examples/gCreate/gMax1.5+/Configuration.h | 2253 ------------- .../gCreate/gMax1.5+/Configuration_adv.h | 2931 ---------------- .../examples/gCreate/gMax1.5+/_Bootscreen.h | 101 - config/examples/makibox/Configuration.h | 2229 ------------- config/examples/makibox/Configuration_adv.h | 2931 ---------------- config/examples/tvrrug/Round2/Configuration.h | 2221 ------------- .../tvrrug/Round2/Configuration_adv.h | 2931 ---------------- config/examples/wt150/Configuration.h | 2231 ------------- config/examples/wt150/Configuration_adv.h | 2932 ---------------- 367 files changed, 3 insertions(+), 735681 deletions(-) create mode 100644 config/README.md delete mode 100644 config/default/Configuration.h delete mode 100644 config/default/Configuration_adv.h delete mode 100644 config/examples/3DFabXYZ/Migbot/Configuration.h delete mode 100644 config/examples/3DFabXYZ/Migbot/Configuration_adv.h delete mode 100644 config/examples/3DFabXYZ/Migbot/Readme.md delete mode 100644 config/examples/ADIMLab/Gantry v1/Configuration.h delete mode 100644 config/examples/ADIMLab/Gantry v1/Configuration_adv.h delete mode 100644 config/examples/ADIMLab/Gantry v1/_Bootscreen.h delete mode 100644 config/examples/ADIMLab/Gantry v2/Configuration.h delete mode 100644 config/examples/ADIMLab/Gantry v2/Configuration_adv.h delete mode 100644 config/examples/ADIMLab/Gantry v2/_Bootscreen.h delete mode 100644 config/examples/AlephObjects/TAZ4/Configuration.h delete mode 100644 config/examples/AlephObjects/TAZ4/Configuration_adv.h delete mode 100644 config/examples/Alfawise/U20-bltouch/Configuration.h delete mode 100644 config/examples/Alfawise/U20-bltouch/Configuration_adv.h delete mode 100644 config/examples/Alfawise/U20-bltouch/_Statusscreen.h delete mode 100644 config/examples/Alfawise/U20/Configuration.h delete mode 100644 config/examples/Alfawise/U20/Configuration_adv.h delete mode 100644 config/examples/Alfawise/U20/_Statusscreen.h delete mode 100644 config/examples/AliExpress/CL-260/Configuration.h delete mode 100644 config/examples/AliExpress/CL-260/README.txt delete mode 100644 config/examples/AliExpress/UM2pExt/Configuration.h delete mode 100644 config/examples/AliExpress/UM2pExt/Configuration_adv.h delete mode 100644 config/examples/Anet/A2/Configuration.h delete mode 100644 config/examples/Anet/A2/Configuration_adv.h delete mode 100644 config/examples/Anet/A2plus/Configuration.h delete mode 100644 config/examples/Anet/A2plus/Configuration_adv.h delete mode 100644 config/examples/Anet/A6/Configuration.h delete mode 100644 config/examples/Anet/A6/Configuration_adv.h delete mode 100755 config/examples/Anet/A6/_Statusscreen.h delete mode 100644 config/examples/Anet/A8/Configuration.h delete mode 100644 config/examples/Anet/A8/Configuration_adv.h delete mode 100755 config/examples/Anet/A8/_Statusscreen.h delete mode 100644 config/examples/Anet/A8plus/Configuration.h delete mode 100644 config/examples/Anet/A8plus/Configuration_adv.h delete mode 100755 config/examples/Anet/A8plus/_Statusscreen.h delete mode 100644 config/examples/Anet/E10/Configuration.h delete mode 100644 config/examples/Anet/E10/Configuration_adv.h delete mode 100644 config/examples/Anet/E16/Configuration.h delete mode 100644 config/examples/Anet/E16/Configuration_adv.h delete mode 100644 config/examples/Anet/E16/_Bootscreen.h delete mode 100644 config/examples/Anet/E16/_Statusscreen.h delete mode 100644 config/examples/AnimationExample/_Bootscreen.h delete mode 100644 config/examples/AnyCubic/i3/Configuration.h delete mode 100644 config/examples/AnyCubic/i3/Configuration_adv.h delete mode 100644 config/examples/ArmEd/Configuration.h delete mode 100644 config/examples/ArmEd/Configuration_adv.h delete mode 100644 config/examples/Artillery/Genius/Configuration.h delete mode 100755 config/examples/Artillery/Genius/Configuration_adv.h delete mode 100755 config/examples/Artillery/Genius/_Bootscreen.h delete mode 100644 config/examples/Artillery/Sidewinder X1/Configuration.h delete mode 100755 config/examples/Artillery/Sidewinder X1/Configuration_adv.h delete mode 100755 config/examples/Artillery/Sidewinder X1/_Bootscreen.h delete mode 100644 config/examples/Azteeg/X5GT/Configuration.h delete mode 100644 config/examples/BIBO/TouchX/cyclops/Configuration.h delete mode 100644 config/examples/BIBO/TouchX/cyclops/Configuration_adv.h delete mode 100644 config/examples/BIBO/TouchX/default/Configuration.h delete mode 100644 config/examples/BIBO/TouchX/default/Configuration_adv.h delete mode 100644 config/examples/BQ/Hephestos/Configuration.h delete mode 100644 config/examples/BQ/Hephestos/Configuration_adv.h delete mode 100644 config/examples/BQ/Hephestos_2/Configuration.h delete mode 100644 config/examples/BQ/Hephestos_2/Configuration_adv.h delete mode 100644 config/examples/BQ/Hephestos_2/README.md delete mode 100644 config/examples/BQ/Hephestos_2/_Bootscreen.h delete mode 100644 config/examples/BQ/WITBOX/Configuration.h delete mode 100644 config/examples/BQ/WITBOX/Configuration_adv.h delete mode 100644 config/examples/BigTreeTech/SKR Mini E3 1.0/Configuration.h delete mode 100644 config/examples/BigTreeTech/SKR Mini E3 1.0/Configuration_adv.h delete mode 100644 config/examples/BigTreeTech/SKR Mini E3 1.2/Configuration.h delete mode 100644 config/examples/BigTreeTech/SKR Mini E3 1.2/Configuration_adv.h delete mode 100644 config/examples/Cartesio/Configuration.h delete mode 100644 config/examples/Cartesio/Configuration_adv.h delete mode 100644 config/examples/Cartesio/_Bootscreen.h delete mode 100644 config/examples/Creality/CR-10/Configuration.h delete mode 100644 config/examples/Creality/CR-10/Configuration_adv.h delete mode 100644 config/examples/Creality/CR-10/_Bootscreen.h delete mode 100644 config/examples/Creality/CR-10/_Statusscreen.h delete mode 100644 config/examples/Creality/CR-10S/Configuration.h delete mode 100644 config/examples/Creality/CR-10S/Configuration_adv.h delete mode 100644 config/examples/Creality/CR-10S/_Bootscreen.h delete mode 100644 config/examples/Creality/CR-10S/_Statusscreen.h delete mode 100644 config/examples/Creality/CR-10_5S/Configuration.h delete mode 100644 config/examples/Creality/CR-10_5S/Configuration_adv.h delete mode 100644 config/examples/Creality/CR-10_5S/_Bootscreen.h delete mode 100644 config/examples/Creality/CR-10mini/Configuration.h delete mode 100644 config/examples/Creality/CR-10mini/Configuration_adv.h delete mode 100644 config/examples/Creality/CR-10mini/_Bootscreen.h delete mode 100644 config/examples/Creality/CR-10mini/_Statusscreen.h delete mode 100644 config/examples/Creality/CR-20 Pro/Configuration.h delete mode 100644 config/examples/Creality/CR-20 Pro/Configuration_adv.h delete mode 100644 config/examples/Creality/CR-20 Pro/_Statusscreen.h delete mode 100644 config/examples/Creality/CR-20/Configuration.h delete mode 100644 config/examples/Creality/CR-20/Configuration_adv.h delete mode 100644 config/examples/Creality/CR-8/Configuration.h delete mode 100644 config/examples/Creality/CR-8/Configuration_adv.h delete mode 100644 config/examples/Creality/Ender-2/Configuration.h delete mode 100644 config/examples/Creality/Ender-2/Configuration_adv.h delete mode 100644 config/examples/Creality/Ender-2/README.md delete mode 100644 config/examples/Creality/Ender-2/_Bootscreen.h delete mode 100644 config/examples/Creality/Ender-2/_Statusscreen.h delete mode 100644 config/examples/Creality/Ender-3/Configuration.h delete mode 100644 config/examples/Creality/Ender-3/Configuration_adv.h delete mode 100644 config/examples/Creality/Ender-3/_Bootscreen.h delete mode 100644 config/examples/Creality/Ender-3/_Statusscreen.h delete mode 100644 config/examples/Creality/Ender-4/Configuration.h delete mode 100644 config/examples/Creality/Ender-4/Configuration_adv.h delete mode 100644 config/examples/Creality/Ender-5 Pro/Configuration.h delete mode 100644 config/examples/Creality/Ender-5 Pro/Configuration_adv.h delete mode 100644 config/examples/Creality/Ender-5 Pro/_Bootscreen.h delete mode 100755 config/examples/Creality/Ender-5 Pro/_Statusscreen.h delete mode 100644 config/examples/Creality/Ender-5/Configuration.h delete mode 100644 config/examples/Creality/Ender-5/Configuration_adv.h delete mode 100644 config/examples/Creality/Ender-5/README.md delete mode 100644 config/examples/Creality/Ender-5/_Bootscreen.h delete mode 100755 config/examples/Creality/Ender-5/_Statusscreen.h delete mode 100644 config/examples/Dagoma/Disco Ultimate/Configuration.h delete mode 100644 config/examples/Dagoma/Disco Ultimate/Configuration_adv.h delete mode 100644 config/examples/EXP3D/Imprimante multifonction/Configuration.h delete mode 100644 config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h delete mode 100644 config/examples/Einstart-S/Configuration.h delete mode 100644 config/examples/Einstart-S/Configuration_adv.h delete mode 100644 config/examples/Einstart-S/readme.md delete mode 100644 config/examples/FYSETC/AIO_II/Configuration.h delete mode 100644 config/examples/FYSETC/AIO_II/Configuration_adv.h delete mode 100644 config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration.h delete mode 100644 config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h delete mode 100644 config/examples/FYSETC/Cheetah 1.2/base/Configuration.h delete mode 100644 config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h delete mode 100644 config/examples/FYSETC/Cheetah/BLTouch/Configuration.h delete mode 100644 config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h delete mode 100644 config/examples/FYSETC/Cheetah/base/Configuration.h delete mode 100644 config/examples/FYSETC/Cheetah/base/Configuration_adv.h delete mode 100644 config/examples/FYSETC/F6_13/Configuration.h delete mode 100644 config/examples/FYSETC/F6_13/Configuration_adv.h delete mode 100644 config/examples/FYSETC/S6/Configuration.h delete mode 100644 config/examples/FYSETC/S6/Configuration_adv.h delete mode 100644 config/examples/Felix/DUAL/Configuration.h delete mode 100644 config/examples/Felix/DUAL/Configuration_adv.h delete mode 100644 config/examples/Felix/DUAL/README.md delete mode 100644 config/examples/Felix/Single/Configuration.h delete mode 100644 config/examples/Felix/Single/Configuration_adv.h delete mode 100644 config/examples/Felix/Single/README.md delete mode 100644 config/examples/FlashForge/CreatorPro/Configuration.h delete mode 100644 config/examples/FlashForge/CreatorPro/Configuration_adv.h delete mode 100644 config/examples/FlashForge/CreatorPro/CuraSettings.txt delete mode 100644 config/examples/FolgerTech/i3-2020/Configuration.h delete mode 100644 config/examples/FolgerTech/i3-2020/Configuration_adv.h delete mode 100644 config/examples/Formbot/Raptor/Configuration.h delete mode 100644 config/examples/Formbot/Raptor/Configuration_adv.h delete mode 100644 config/examples/Formbot/Raptor/_Bootscreen.h delete mode 100644 config/examples/Formbot/Raptor/_Statusscreen.h delete mode 100644 config/examples/Formbot/T_Rex_2+/Configuration.h delete mode 100644 config/examples/Formbot/T_Rex_2+/Configuration_adv.h delete mode 100644 config/examples/Formbot/T_Rex_2+/_Bootscreen.h delete mode 100644 config/examples/Formbot/T_Rex_2+/_Statusscreen.h delete mode 100644 config/examples/Formbot/T_Rex_3/Configuration.h delete mode 100644 config/examples/Formbot/T_Rex_3/Configuration_adv.h delete mode 100644 config/examples/Formbot/T_Rex_3/_Bootscreen.h delete mode 100644 config/examples/Formbot/T_Rex_3/_Statusscreen.h delete mode 100644 config/examples/Geeetech/A10/Configuration.h delete mode 100644 config/examples/Geeetech/A10/Configuration_adv.h delete mode 100644 config/examples/Geeetech/A10D/Configuration.h delete mode 100644 config/examples/Geeetech/A10D/Configuration_adv.h delete mode 100644 config/examples/Geeetech/A10M/Configuration.h delete mode 100644 config/examples/Geeetech/A10M/Configuration_adv.h delete mode 100644 config/examples/Geeetech/A10T/Configuration.h delete mode 100644 config/examples/Geeetech/A10T/Configuration_adv.h delete mode 100644 config/examples/Geeetech/A20/Configuration.h delete mode 100644 config/examples/Geeetech/A20/Configuration_adv.h delete mode 100644 config/examples/Geeetech/A20M/Configuration.h delete mode 100644 config/examples/Geeetech/A20M/Configuration_adv.h delete mode 100644 config/examples/Geeetech/A20T/Configuration.h delete mode 100644 config/examples/Geeetech/A20T/Configuration_adv.h delete mode 100644 config/examples/Geeetech/A30/Configuration.h delete mode 100644 config/examples/Geeetech/A30/Configuration_adv.h delete mode 100644 config/examples/Geeetech/D200/Configuration.h delete mode 100644 config/examples/Geeetech/D200/Configuration_adv.h delete mode 100644 config/examples/Geeetech/E180/Configuration.h delete mode 100644 config/examples/Geeetech/E180/Configuration_adv.h delete mode 100644 config/examples/Geeetech/GT2560/Configuration.h delete mode 100644 config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h delete mode 100644 config/examples/Geeetech/M201/Configuration.h delete mode 100644 config/examples/Geeetech/M201/Configuration_adv.h delete mode 100644 config/examples/Geeetech/MeCreator2/Configuration.h delete mode 100644 config/examples/Geeetech/MeCreator2/Configuration_adv.h delete mode 100644 config/examples/Geeetech/PI3A PRO/Configuration.h delete mode 100644 config/examples/Geeetech/PI3A PRO/Configuration_adv.h delete mode 100644 config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h delete mode 100644 config/examples/Geeetech/Prusa i3 Pro B/bltouch/README.md delete mode 100644 config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h delete mode 100644 config/examples/Geeetech/Prusa i3 Pro B/noprobe/README.md delete mode 100644 config/examples/Geeetech/Prusa i3 Pro C/Configuration.h delete mode 100644 config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h delete mode 100644 config/examples/Geeetech/Prusa i3 Pro W/Configuration.h delete mode 100644 config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h delete mode 100644 config/examples/HMS434/Configuration.h delete mode 100644 config/examples/HMS434/Configuration_adv.h delete mode 100644 config/examples/Infitary/i3-M508/Configuration.h delete mode 100644 config/examples/Infitary/i3-M508/Configuration_adv.h delete mode 100644 config/examples/JGAurora/A1/Configuration.h delete mode 100644 config/examples/JGAurora/A1/Configuration_adv.h delete mode 100644 config/examples/JGAurora/A5/Configuration.h delete mode 100644 config/examples/JGAurora/A5/Configuration_adv.h delete mode 100644 config/examples/JGAurora/A5/README.md delete mode 100644 config/examples/JGAurora/A5S/Configuration.h delete mode 100644 config/examples/JGAurora/A5S/Configuration_adv.h delete mode 100644 config/examples/JGAurora/Magic/Configuration.h delete mode 100644 config/examples/JGAurora/Magic/Configuration_adv.h delete mode 100644 config/examples/MakerFarm/Pegasus_12/Configuration.h delete mode 100644 config/examples/MakerFarm/Pegasus_12/Configuration_adv.h delete mode 100644 config/examples/MakerParts/Configuration.h delete mode 100644 config/examples/MakerParts/Configuration_adv.h delete mode 100644 config/examples/MakerParts/_Bootscreen.h delete mode 100644 config/examples/Malyan/M150/Configuration.h delete mode 100644 config/examples/Malyan/M150/Configuration_adv.h delete mode 100644 config/examples/Malyan/M150/README.md delete mode 100644 config/examples/Malyan/M150/_Bootscreen.h delete mode 100644 config/examples/Malyan/M200/Configuration.h delete mode 100644 config/examples/Malyan/M200/Configuration_adv.h delete mode 100644 config/examples/Malyan/M200/README.md delete mode 100644 config/examples/Micromake/C1/basic/Configuration.h delete mode 100644 config/examples/Micromake/C1/basic/README.md delete mode 100644 config/examples/Micromake/C1/enhanced/Configuration.h delete mode 100644 config/examples/Micromake/C1/enhanced/Configuration_adv.h delete mode 100644 config/examples/Micromake/C1/enhanced/README.md delete mode 100644 config/examples/Mks/Robin/Configuration.h delete mode 100644 config/examples/Mks/Robin/Configuration_adv.h delete mode 100644 config/examples/Mks/Robin_Lite3/Configuration.h delete mode 100644 config/examples/Mks/Robin_Lite3/ReadMe.txt delete mode 100644 config/examples/Mks/Robin_Pro/Configuration.h delete mode 100644 config/examples/Mks/Robin_Pro/ReadMe.txt delete mode 100644 config/examples/Mks/Sbase/Configuration.h delete mode 100644 config/examples/Mks/Sbase/Configuration_adv.h delete mode 100644 config/examples/Mks/Sbase/README.txt delete mode 100644 config/examples/Modix/Big60/Configuration.h delete mode 100644 config/examples/Modix/Big60/Configuration_adv.h delete mode 100644 config/examples/Modix/Big60/_Bootscreen.h delete mode 100644 config/examples/Modix/Big60/_Statusscreen.h delete mode 100644 config/examples/Printrbot/PrintrboardG2/Configuration.h delete mode 100644 config/examples/RapideLite/RL200/Configuration.h delete mode 100644 config/examples/RapideLite/RL200/Configuration_adv.h delete mode 100644 config/examples/Renkforce/RF100/Configuration.h delete mode 100644 config/examples/Renkforce/RF100/Configuration_adv.h delete mode 100644 config/examples/Renkforce/RF100XL/Configuration.h delete mode 100644 config/examples/Renkforce/RF100XL/Configuration_adv.h delete mode 100644 config/examples/Renkforce/RF100v2/Configuration.h delete mode 100644 config/examples/Renkforce/RF100v2/Configuration_adv.h delete mode 100644 config/examples/RepRapPro/Huxley/Configuration.h delete mode 100644 config/examples/RepRapWorld/Megatronics/Configuration.h delete mode 100644 config/examples/RigidBot/Configuration.h delete mode 100644 config/examples/RigidBot/Configuration_adv.h delete mode 100644 config/examples/SCARA/MP_SCARA/Configuration.h delete mode 100644 config/examples/SCARA/MP_SCARA/Configuration_adv.h delete mode 100644 config/examples/SCARA/Morgan/Configuration.h delete mode 100644 config/examples/SCARA/Morgan/Configuration_adv.h delete mode 100644 config/examples/STM32/Black_STM32F407VET6/Configuration.h delete mode 100644 config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h delete mode 100644 config/examples/STM32/STM32F103RE/Configuration.h delete mode 100644 config/examples/STM32/STM32F4/Configuration.h delete mode 100644 config/examples/STM32/stm32f103ret6/Configuration.h delete mode 100644 config/examples/Sanguinololu/Configuration.h delete mode 100644 config/examples/Sanguinololu/Configuration_adv.h delete mode 100644 config/examples/Tevo/Michelangelo/Configuration.h delete mode 100644 config/examples/Tevo/Michelangelo/Configuration_adv.h delete mode 100644 config/examples/Tevo/Michelangelo/_Bootscreen.h delete mode 100755 config/examples/Tevo/Nereus/Configuration.h delete mode 100755 config/examples/Tevo/Nereus/Configuration_adv.h delete mode 100755 config/examples/Tevo/Nereus/_Bootscreen.h delete mode 100644 config/examples/Tevo/Tarantula Pro/Configuration.h delete mode 100755 config/examples/Tevo/Tarantula Pro/Configuration_adv.h delete mode 100644 config/examples/Tevo/Tarantula Pro/_Bootscreen.h delete mode 100644 config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h delete mode 100755 config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h delete mode 100644 config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h delete mode 100755 config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h delete mode 100644 config/examples/Tevo/Tornado/_Bootscreen.h delete mode 100644 config/examples/TheBorg/Configuration.h delete mode 100644 config/examples/TheBorg/Configuration_adv.h delete mode 100644 config/examples/TinyBoy2/Configuration.h delete mode 100644 config/examples/TinyBoy2/Configuration_adv.h delete mode 100644 config/examples/Tronxy/X1/Configuration.h delete mode 100644 config/examples/Tronxy/X3A/Configuration.h delete mode 100644 config/examples/Tronxy/X3A/Configuration_adv.h delete mode 100644 config/examples/Tronxy/X5S-2E/Configuration.h delete mode 100644 config/examples/Tronxy/X5S-2E/Configuration_adv.h delete mode 100644 config/examples/Tronxy/X5S/Configuration.h delete mode 100644 config/examples/Tronxy/XY100/Configuration.h delete mode 100644 config/examples/UltiMachine/Archim1/Configuration.h delete mode 100644 config/examples/UltiMachine/Archim1/Configuration_adv.h delete mode 100644 config/examples/UltiMachine/Archim2/Configuration.h delete mode 100644 config/examples/UltiMachine/Archim2/Configuration_adv.h delete mode 100644 config/examples/VORONDesign/Configuration.h delete mode 100644 config/examples/VORONDesign/Configuration_adv.h delete mode 100644 config/examples/VORONDesign/_Bootscreen.h delete mode 100644 config/examples/Velleman/K8200/Configuration.h delete mode 100644 config/examples/Velleman/K8200/Configuration_adv.h delete mode 100644 config/examples/Velleman/K8200/README.md delete mode 100644 config/examples/Velleman/K8400/Dual-head/Configuration.h delete mode 100644 config/examples/Velleman/K8400/Dual-head/Configuration_adv.h delete mode 100644 config/examples/Velleman/K8400/Dual-head/README.md delete mode 100644 config/examples/Velleman/K8400/Single-head/Configuration.h delete mode 100644 config/examples/Velleman/K8400/Single-head/Configuration_adv.h delete mode 100644 config/examples/Velleman/K8400/Single-head/README.md delete mode 100644 config/examples/WASP/PowerWASP/Configuration.h delete mode 100644 config/examples/WASP/PowerWASP/Configuration_adv.h delete mode 100644 config/examples/WASP/PowerWASP/README.md delete mode 100644 config/examples/Wanhao/Duplicator 6/Configuration.h delete mode 100644 config/examples/Wanhao/Duplicator 6/Configuration_adv.h delete mode 100644 config/examples/Wanhao/Duplicator i3 2.1/Chippy_Bootscreen.h delete mode 100644 config/examples/Wanhao/Duplicator i3 2.1/Configuration.h delete mode 100644 config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h delete mode 100644 config/examples/Wanhao/Duplicator i3 2.1/README.md delete mode 100644 config/examples/Wanhao/Duplicator i3 2.1/_Bootscreen.h delete mode 100755 config/examples/Wanhao/Duplicator i3 Mini/Configuration.h delete mode 100644 config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h delete mode 100755 config/examples/Wanhao/Duplicator i3 Mini/_Bootscreen.h delete mode 100644 config/examples/adafruit/ST7565/Configuration.h delete mode 100644 config/examples/delta/Anycubic/Kossel/Configuration.h delete mode 100644 config/examples/delta/Anycubic/Kossel/Configuration_adv.h delete mode 100644 config/examples/delta/Anycubic/Kossel/README.md delete mode 100644 config/examples/delta/Anycubic/Kossel/images/Version1Probe.jpg delete mode 100644 config/examples/delta/Anycubic/Kossel/images/Version2Probe.jpg delete mode 100644 config/examples/delta/Dreammaker/Overlord/Configuration.h delete mode 100644 config/examples/delta/Dreammaker/Overlord/Configuration_adv.h delete mode 100644 config/examples/delta/Dreammaker/Overlord/_Bootscreen.h delete mode 100644 config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h delete mode 100644 config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h delete mode 100644 config/examples/delta/Dreammaker/Overlord_Pro/_Bootscreen.h delete mode 100644 config/examples/delta/FLSUN/QQ-S/Configuration.h delete mode 100644 config/examples/delta/FLSUN/QQ-S/Configuration_adv.h delete mode 100644 config/examples/delta/FLSUN/auto_calibrate/Configuration.h delete mode 100644 config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h delete mode 100644 config/examples/delta/FLSUN/kossel/Configuration.h delete mode 100644 config/examples/delta/FLSUN/kossel/Configuration_adv.h delete mode 100644 config/examples/delta/FLSUN/kossel_mini/Configuration.h delete mode 100644 config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h delete mode 100644 config/examples/delta/Geeetech/G2Pro/Configuration.h delete mode 100644 config/examples/delta/Geeetech/G2Pro/Configuration_adv.h delete mode 100644 config/examples/delta/Geeetech/Rostock 301/Configuration.h delete mode 100644 config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h delete mode 100644 config/examples/delta/Hatchbox_Alpha/Configuration.h delete mode 100644 config/examples/delta/MKS/SBASE/Configuration.h delete mode 100644 config/examples/delta/MKS/SBASE/Configuration_adv.h delete mode 100644 config/examples/delta/MKS/SBASE/RRD Full Graphic Smart Controller.md delete mode 100644 config/examples/delta/Tevo Little Monster/Configuration.h delete mode 100644 config/examples/delta/Tevo Little Monster/Configuration_adv.h delete mode 100644 config/examples/delta/generic/Configuration.h delete mode 100644 config/examples/delta/generic/Configuration_adv.h delete mode 100644 config/examples/delta/kossel_clear/Configuration.h delete mode 100644 config/examples/delta/kossel_clear/Configuration_adv.h delete mode 100644 config/examples/delta/kossel_mini/Configuration.h delete mode 100644 config/examples/delta/kossel_mini/Configuration_adv.h delete mode 100644 config/examples/delta/kossel_pro/Configuration.h delete mode 100644 config/examples/delta/kossel_pro/README.md delete mode 100644 config/examples/delta/kossel_xl/Configuration.h delete mode 100644 config/examples/delta/kossel_xl/Configuration_adv.h delete mode 100644 config/examples/delta/kossel_xl/README.md delete mode 100644 config/examples/gCreate/gMax1.5+/Configuration.h delete mode 100644 config/examples/gCreate/gMax1.5+/Configuration_adv.h delete mode 100644 config/examples/gCreate/gMax1.5+/_Bootscreen.h delete mode 100644 config/examples/makibox/Configuration.h delete mode 100644 config/examples/makibox/Configuration_adv.h delete mode 100644 config/examples/tvrrug/Round2/Configuration.h delete mode 100644 config/examples/tvrrug/Round2/Configuration_adv.h delete mode 100644 config/examples/wt150/Configuration.h delete mode 100644 config/examples/wt150/Configuration_adv.h diff --git a/config/README.md b/config/README.md new file mode 100644 index 0000000000..7101025a43 --- /dev/null +++ b/config/README.md @@ -0,0 +1,3 @@ +# Where have all the configurations gone? + +## https://github.com/MarlinFirmware/Configurations diff --git a/config/default/Configuration.h b/config/default/Configuration.h deleted file mode 100644 index ee82fbf9f3..0000000000 --- a/config/default/Configuration.h +++ /dev/null @@ -1,2226 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB -#endif - -// Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 0 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - #define DEFAULT_Kp 22.2 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 500 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -//#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h deleted file mode 100644 index 4685198fc2..0000000000 --- a/config/default/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -//#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/3DFabXYZ/Migbot/Configuration.h b/config/examples/3DFabXYZ/Migbot/Configuration.h deleted file mode 100644 index 0d322f8932..0000000000 --- a/config/examples/3DFabXYZ/Migbot/Configuration.h +++ /dev/null @@ -1,2258 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "AJMartel" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) -#define WEBSITE_URL "http://3DFabXYZ.com" - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_MKS_BASE_14 -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "3DFabXYZ i3" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 5 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 5 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Electron - #define DEFAULT_Kp 29.12 - #define DEFAULT_Ki 3.22 - #define DEFAULT_Kd 65.83 - - // Ultimaker - //#define DEFAULT_Kp 22.2 - //#define DEFAULT_Ki 1.08 - //#define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - #define ENDSTOPPULLUP_XMAX - #define ENDSTOPPULLUP_YMAX - #define ENDSTOPPULLUP_ZMAX - #define ENDSTOPPULLUP_XMIN - #define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -//#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 500 } -#define DEFAULT_AXIS_STEPS_PER_UNIT { 79.9738621, 80.2429911, 399.7264854 , 99.4696994 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 225, 225, 3, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 1590, 1590, 100, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 1590 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 1590 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 8.0 - #define DEFAULT_YJERK 8.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.016 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 21, 61, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 7500 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 3 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR false -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -#define Z_HOMING_HEIGHT 3 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 219 -#define Y_BED_SIZE 280 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - #define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y 4 - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -#define MANUAL_X_HOME_POS 0 -#define MANUAL_Y_HOME_POS 0 -#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 205 -#define PREHEAT_1_TEMP_BED 60 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 255 -#define PREHEAT_2_TEMP_BED 100 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_3_LABEL "HIPS" -#define PREHEAT_3_TEMP_HOTEND 220 //HIPS -#define PREHEAT_3_TEMP_BED 100 -#define PREHEAT_3_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_4_LABEL "PP" -#define PREHEAT_4_TEMP_HOTEND 254 //PP -#define PREHEAT_4_TEMP_BED 100 -#define PREHEAT_4_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_5_LABEL "PET" -#define PREHEAT_5_TEMP_HOTEND 240 //PET -#define PREHEAT_5_TEMP_BED 90 -#define PREHEAT_5_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_6_LABEL "FLEX" -#define PREHEAT_6_TEMP_HOTEND 230 //FLEX -#define PREHEAT_6_TEMP_BED 50 -#define PREHEAT_6_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_7_LABEL "NYLON" -#define PREHEAT_7_TEMP_HOTEND 240 //NYLON -#define PREHEAT_7_TEMP_BED 80 -#define PREHEAT_7_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - #define RGB_LED_R_PIN 50 - #define RGB_LED_G_PIN 51 - #define RGB_LED_B_PIN 52 - #define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h deleted file mode 100644 index fa78b0b04f..0000000000 --- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h +++ /dev/null @@ -1,2942 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - #define CONTROLLER_FAN_PIN 7 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 127 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - #define CASE_LIGHT_PIN 11 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON false // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - #define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 75 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 160 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - #define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G27" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -//#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 12 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - #define CHDK_PIN 12 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - #define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - #define CUSTOM_USER_MENU_TITLE "Tools" - #define USER_SCRIPT_DONE "M117 Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Probe Mesh&Save" - #define USER_GCODE_1 "G28\nG29 P1\nG29 P3 T0\nG29 S0 A F10\nG29 J2\nM500" - - #define USER_DESC_2 "Manual Mesh&Save" - #define USER_GCODE_2 "G28\nG29 P4 R999 T\nG29 S0 A F10\nM500" - - #define USER_DESC_3 "Print Test Pattern" - #define USER_GCODE_3 "G26 C P O2.25" //Do a typical test sequence - - #define USER_DESC_4 "Move Bed Forward" - #define USER_GCODE_4 "G28 X0 Y0\nG1 X0 Y180 F3000\nM84" //move X/Y to min endstops & Feed the bed forward & steppers off - - /* - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" - */ -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/3DFabXYZ/Migbot/Readme.md b/config/examples/3DFabXYZ/Migbot/Readme.md deleted file mode 100644 index 708b3fe632..0000000000 --- a/config/examples/3DFabXYZ/Migbot/Readme.md +++ /dev/null @@ -1,4 +0,0 @@ -Personalized config files for the "Electron" "Tevo 3D" i3 6th gen - -- https://www.3dprintersbay.com/electron3d-reprap-prusa-i3-kit -- https://reprap.org/wiki/Migbot_Prusa_i3 diff --git a/config/examples/ADIMLab/Gantry v1/Configuration.h b/config/examples/ADIMLab/Gantry v1/Configuration.h deleted file mode 100644 index 746c442074..0000000000 --- a/config/examples/ADIMLab/Gantry v1/Configuration.h +++ /dev/null @@ -1,2227 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(ETE-Design, Gantry v1)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_HJC2560C_REV1 -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "ADIMLab Gantry v1" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 1 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 1 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 120 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - #define DEFAULT_Kp 22.2 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 1300 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80.4, 80.4, 400, 94 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 2000, 2000, 50, 2000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 20.0 - #define DEFAULT_YJERK 20.0 - #define DEFAULT_ZJERK 0.4 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.16 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR false -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 325 -#define Y_BED_SIZE 325 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 415 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -#define FILAMENT_RUNOUT_SENSOR -#define FIL_RUNOUT_PIN 24 -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 5 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 195 -#define PREHEAT_1_TEMP_BED 55 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 230 -#define PREHEAT_2_TEMP_BED 70 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 60 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h deleted file mode 100644 index 1aefeb219a..0000000000 --- a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 360 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 8 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - #define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - #define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 75 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 160 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -#define LCD_TIMEOUT_TO_STATUS 60000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 28 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK true // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 4 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 0 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/ADIMLab/Gantry v1/_Bootscreen.h b/config/examples/ADIMLab/Gantry v1/_Bootscreen.h deleted file mode 100644 index ebb0ad9a81..0000000000 --- a/config/examples/ADIMLab/Gantry v1/_Bootscreen.h +++ /dev/null @@ -1,86 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Made with Marlin Bitmap Converter - * http://marlinfw.org/tools/u8glib/converter.html - */ -#define CUSTOM_BOOTSCREEN_BMPWIDTH 88 - -const unsigned char custom_start_bmp[] PROGMEM = { - B00000000,B00000000,B00000000,B00001111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00111111,B11111000,B00000000,B01000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00011110,B01111111,B11111111,B00000000,B10000100,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00111111,B11111111,B11111111,B11111111,B00000100,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00111111,B11111111,B11111111,B11111110,B00001100,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B01111111,B11111111,B11111111,B11110000,B00001000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00001111,B11111111,B11100000,B00000000,B00011000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B11111111,B11100011,B10000000,B00111000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00010011,B11111111,B11100001,B10000000,B01111000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00011111,B10001111,B11100011,B10000000,B11110000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00011110,B00001111,B11111111,B10000001,B11110000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000110,B00011111,B11111111,B10000111,B11100000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B11111111,B11111110,B00001111,B11100000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000111,B11111111,B11110000,B01111111,B11000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00001111,B11111100,B00000011,B11111111,B10000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00011111,B11000000,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00111110,B00011111,B11111111,B11111110,B00111111,B11000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B01111100,B11111111,B11111111,B11111100,B00001111,B11100000,B00000000,B00000000,B00000000, - B00000000,B00000000,B11111001,B11111111,B11111111,B11110000,B00001111,B11110000,B00000000,B00000000,B00000000, - B00000000,B00000000,B11110011,B11111111,B11111111,B11111000,B00011111,B11111000,B00000000,B00000000,B00000000, - B00000000,B00000000,B11100111,B11111111,B11111111,B11111111,B11111111,B11111100,B00000000,B00000000,B00000000, - B00000000,B00000001,B11101111,B11111111,B11111111,B11111111,B11111111,B11111110,B00000000,B00000000,B00000000, - B00000000,B00000001,B11101111,B11111110,B00001111,B11111111,B11111111,B11101111,B10000000,B00000000,B00000000, - B00000000,B00000001,B11001111,B11110000,B00000001,B11111111,B11111111,B11110011,B11111000,B00000000,B00000000, - B00000000,B00000000,B11101111,B11100000,B00000000,B11111111,B11111111,B11111000,B01100000,B00000000,B00000000, - B00000000,B00000000,B11101111,B11100000,B00000000,B00111111,B11111111,B11111000,B00000000,B00000000,B00000000, - B00000000,B00000000,B11101111,B11000000,B00000000,B00011111,B11111111,B11111000,B00000000,B00000000,B00000000, - B00000000,B00000000,B01100111,B11100100,B00000000,B00001111,B11111111,B11111100,B00000000,B00000000,B00000000, - B00000000,B00000000,B00110011,B11111100,B00000000,B00000111,B11111111,B11111100,B00000000,B00000000,B00000000, - B00000000,B00000000,B00011001,B11111100,B00000000,B00000011,B11100000,B11111100,B00000000,B00000000,B00000000, - B00000000,B00000000,B00001100,B01111000,B00000000,B00000001,B11100000,B00111100,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B01110000,B00011100,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000011,B10000000,B00000000,B00000000,B00000000,B00001110,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000001,B11100000,B00000000,B00000000,B00000000,B00001111,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000001,B11110000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000001,B11111000,B00000000,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000, - B00000000,B00000000,B00000001,B11111100,B00000000,B00000000,B00000000,B00000111,B11000000,B00000000,B00000000, - B00000000,B00000000,B00000011,B11111100,B00000000,B00000000,B00000000,B00001111,B11000000,B00000000,B00000000, - B00000000,B00000000,B00000111,B11111100,B00000000,B00000000,B00000000,B00001111,B11100000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000111,B10000001,B11111111,B10000111,B10011111,B00000111,B10011110,B00000000,B00000000,B00111000,B00000000, - B00000111,B10000001,B11111111,B11000011,B10011111,B00000111,B10001110,B00000000,B00000000,B00111000,B00000000, - B00000111,B10000001,B11000011,B11100011,B10011111,B00000111,B10001110,B00000000,B00000000,B00111000,B00000000, - B00001111,B11000001,B11000000,B11100011,B10011111,B10001111,B10001110,B00000000,B00111100,B00111011,B00000000, - B00001111,B11000001,B11000000,B11100011,B10011111,B10001111,B10001110,B00000000,B11111110,B00111111,B10000000, - B00011101,B11000001,B11000000,B01110011,B10011111,B10011111,B10001110,B00000000,B11111111,B00111111,B10000000, - B00011100,B11100001,B11000000,B01110011,B10011101,B11011011,B10001110,B00000000,B01101111,B00111011,B11000000, - B00011100,B11100001,B11000000,B01110011,B10011101,B11111011,B10001110,B00000000,B00111111,B00111011,B11000000, - B00111111,B11110001,B11000000,B11100011,B10011100,B11111011,B10001110,B00000000,B11111111,B00111011,B11000000, - B00111111,B11110001,B11000000,B11100011,B10011100,B11110011,B10001110,B00000000,B11101111,B00111011,B11000000, - B01111000,B01110001,B11000001,B11100011,B10011100,B11110011,B10001110,B00000001,B11101111,B00111011,B11000000, - B01110000,B01111001,B11111111,B11000011,B10011100,B01100011,B10001111,B11111111,B11101111,B00111111,B10000000, - B01110000,B00111001,B11111111,B10000011,B10011100,B01100011,B10001111,B11111110,B11110111,B00111111,B10000000, - B11110000,B01111101,B11111111,B00000111,B10011110,B00000011,B11011111,B11111100,B01100111,B00100111,B00000000 -}; diff --git a/config/examples/ADIMLab/Gantry v2/Configuration.h b/config/examples/ADIMLab/Gantry v2/Configuration.h deleted file mode 100644 index 9a9d683077..0000000000 --- a/config/examples/ADIMLab/Gantry v2/Configuration.h +++ /dev/null @@ -1,2227 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(ETE-Design, Gantry v2)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_HJC2560C_REV2 -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "ADIMLab Gantry v2" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - #define DEFAULT_Kp 22.2 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 100 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 310 -#define Y_BED_SIZE 310 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS -5 -#define Y_MIN_POS -10 -#define Z_MIN_POS -3 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 410 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -//#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -//#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -#define FILAMENT_RUNOUT_SENSOR -#define FIL_RUNOUT_PIN 24 -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 60 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h deleted file mode 100644 index e1ad356e2a..0000000000 --- a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - #define CASE_LIGHT_PIN 8 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/ADIMLab/Gantry v2/_Bootscreen.h b/config/examples/ADIMLab/Gantry v2/_Bootscreen.h deleted file mode 100644 index ebb0ad9a81..0000000000 --- a/config/examples/ADIMLab/Gantry v2/_Bootscreen.h +++ /dev/null @@ -1,86 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Made with Marlin Bitmap Converter - * http://marlinfw.org/tools/u8glib/converter.html - */ -#define CUSTOM_BOOTSCREEN_BMPWIDTH 88 - -const unsigned char custom_start_bmp[] PROGMEM = { - B00000000,B00000000,B00000000,B00001111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00111111,B11111000,B00000000,B01000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00011110,B01111111,B11111111,B00000000,B10000100,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00111111,B11111111,B11111111,B11111111,B00000100,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00111111,B11111111,B11111111,B11111110,B00001100,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B01111111,B11111111,B11111111,B11110000,B00001000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00001111,B11111111,B11100000,B00000000,B00011000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B11111111,B11100011,B10000000,B00111000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00010011,B11111111,B11100001,B10000000,B01111000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00011111,B10001111,B11100011,B10000000,B11110000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00011110,B00001111,B11111111,B10000001,B11110000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000110,B00011111,B11111111,B10000111,B11100000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B11111111,B11111110,B00001111,B11100000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000111,B11111111,B11110000,B01111111,B11000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00001111,B11111100,B00000011,B11111111,B10000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00011111,B11000000,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00111110,B00011111,B11111111,B11111110,B00111111,B11000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B01111100,B11111111,B11111111,B11111100,B00001111,B11100000,B00000000,B00000000,B00000000, - B00000000,B00000000,B11111001,B11111111,B11111111,B11110000,B00001111,B11110000,B00000000,B00000000,B00000000, - B00000000,B00000000,B11110011,B11111111,B11111111,B11111000,B00011111,B11111000,B00000000,B00000000,B00000000, - B00000000,B00000000,B11100111,B11111111,B11111111,B11111111,B11111111,B11111100,B00000000,B00000000,B00000000, - B00000000,B00000001,B11101111,B11111111,B11111111,B11111111,B11111111,B11111110,B00000000,B00000000,B00000000, - B00000000,B00000001,B11101111,B11111110,B00001111,B11111111,B11111111,B11101111,B10000000,B00000000,B00000000, - B00000000,B00000001,B11001111,B11110000,B00000001,B11111111,B11111111,B11110011,B11111000,B00000000,B00000000, - B00000000,B00000000,B11101111,B11100000,B00000000,B11111111,B11111111,B11111000,B01100000,B00000000,B00000000, - B00000000,B00000000,B11101111,B11100000,B00000000,B00111111,B11111111,B11111000,B00000000,B00000000,B00000000, - B00000000,B00000000,B11101111,B11000000,B00000000,B00011111,B11111111,B11111000,B00000000,B00000000,B00000000, - B00000000,B00000000,B01100111,B11100100,B00000000,B00001111,B11111111,B11111100,B00000000,B00000000,B00000000, - B00000000,B00000000,B00110011,B11111100,B00000000,B00000111,B11111111,B11111100,B00000000,B00000000,B00000000, - B00000000,B00000000,B00011001,B11111100,B00000000,B00000011,B11100000,B11111100,B00000000,B00000000,B00000000, - B00000000,B00000000,B00001100,B01111000,B00000000,B00000001,B11100000,B00111100,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B01110000,B00011100,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000011,B10000000,B00000000,B00000000,B00000000,B00001110,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000001,B11100000,B00000000,B00000000,B00000000,B00001111,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000001,B11110000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000001,B11111000,B00000000,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000, - B00000000,B00000000,B00000001,B11111100,B00000000,B00000000,B00000000,B00000111,B11000000,B00000000,B00000000, - B00000000,B00000000,B00000011,B11111100,B00000000,B00000000,B00000000,B00001111,B11000000,B00000000,B00000000, - B00000000,B00000000,B00000111,B11111100,B00000000,B00000000,B00000000,B00001111,B11100000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000111,B10000001,B11111111,B10000111,B10011111,B00000111,B10011110,B00000000,B00000000,B00111000,B00000000, - B00000111,B10000001,B11111111,B11000011,B10011111,B00000111,B10001110,B00000000,B00000000,B00111000,B00000000, - B00000111,B10000001,B11000011,B11100011,B10011111,B00000111,B10001110,B00000000,B00000000,B00111000,B00000000, - B00001111,B11000001,B11000000,B11100011,B10011111,B10001111,B10001110,B00000000,B00111100,B00111011,B00000000, - B00001111,B11000001,B11000000,B11100011,B10011111,B10001111,B10001110,B00000000,B11111110,B00111111,B10000000, - B00011101,B11000001,B11000000,B01110011,B10011111,B10011111,B10001110,B00000000,B11111111,B00111111,B10000000, - B00011100,B11100001,B11000000,B01110011,B10011101,B11011011,B10001110,B00000000,B01101111,B00111011,B11000000, - B00011100,B11100001,B11000000,B01110011,B10011101,B11111011,B10001110,B00000000,B00111111,B00111011,B11000000, - B00111111,B11110001,B11000000,B11100011,B10011100,B11111011,B10001110,B00000000,B11111111,B00111011,B11000000, - B00111111,B11110001,B11000000,B11100011,B10011100,B11110011,B10001110,B00000000,B11101111,B00111011,B11000000, - B01111000,B01110001,B11000001,B11100011,B10011100,B11110011,B10001110,B00000001,B11101111,B00111011,B11000000, - B01110000,B01111001,B11111111,B11000011,B10011100,B01100011,B10001111,B11111111,B11101111,B00111111,B10000000, - B01110000,B00111001,B11111111,B10000011,B10011100,B01100011,B10001111,B11111110,B11110111,B00111111,B10000000, - B11110000,B01111101,B11111111,B00000111,B10011110,B00000011,B11011111,B11111100,B01100111,B00100111,B00000000 -}; diff --git a/config/examples/AlephObjects/TAZ4/Configuration.h b/config/examples/AlephObjects/TAZ4/Configuration.h deleted file mode 100644 index 8ea42c7878..0000000000 --- a/config/examples/AlephObjects/TAZ4/Configuration.h +++ /dev/null @@ -1,2246 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(Aleph Objects Inc, TAZ)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMBO -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "TAZ" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 7 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 7 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 250 -#define HEATER_1_MAXTEMP 250 -#define HEATER_2_MAXTEMP 250 -#define HEATER_3_MAXTEMP 250 -#define HEATER_4_MAXTEMP 250 -#define HEATER_5_MAXTEMP 250 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 70 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX 74 // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 16 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - // Buda 2.0 on 24V - #define DEFAULT_Kp 6 - #define DEFAULT_Ki .3 - #define DEFAULT_Kd 125 - - // Buda 2.0 on 12V - //#define DEFAULT_Kp 22.2 - //#define DEFAULT_Ki 1.01 - //#define DEFAULT_Kd 114 - - // Ultimaker - //#define DEFAULT_Kp 22.2 - //#define DEFAULT_Ki 1.08 - //#define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 206 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //24V 360W silicone heater from NPH on 3mm borosilicate (TAZ 2.2+) - #define DEFAULT_bedKp 20 - #define DEFAULT_bedKi 5 - #define DEFAULT_bedKd 275 - - //12v 400W silicone heater from QUDB into 3mm borosilicate (TAZ 1.0+) - //from pidautotune - //#define DEFAULT_bedKp 650 - //#define DEFAULT_bedKi 60 - //#define DEFAULT_bedKd 1800 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - //#define DEFAULT_bedKp 10.00 - //#define DEFAULT_bedKi .023 - //#define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 100.5, 100.5, 400, 850 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 800, 800, 8, 50 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 8.0 - #define DEFAULT_YJERK 8.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 10.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.051 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR true -#define INVERT_E2_DIR true -#define INVERT_E3_DIR true -#define INVERT_E4_DIR true -#define INVERT_E5_DIR true - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 298 -#define Y_BED_SIZE 275 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 250 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (8*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 230 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -//#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -#define ENCODER_PULSES_PER_STEP 2 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/config/examples/AlephObjects/TAZ4/Configuration_adv.h deleted file mode 100644 index 77ed861498..0000000000 --- a/config/examples/AlephObjects/TAZ4/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - #define CONTROLLER_FAN_PIN 2 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 130 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 4 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 60 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 4, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -//#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - //#define USER_DESC_5 "Home & Info" - //#define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Alfawise/U20-bltouch/Configuration.h b/config/examples/Alfawise/U20-bltouch/Configuration.h deleted file mode 100644 index 10ff1d1489..0000000000 --- a/config/examples/Alfawise/U20-bltouch/Configuration.h +++ /dev/null @@ -1,2328 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -//=========================================================================== -//============================= Alfawise Printer ============================ -//=========================================================================== - -// Forum link to help with a tutorial, in French! : -// https://www.lesimprimantes3d.fr/forum/topic/18260-alfawise-u20x-u30-marlin-2x-firmware-alternatif/ -// -// 1 - Select your Alfawise U30 or U20 or U20+ printer (NO MORE REQUIRED HERE) -// and the touchscreen version, either 1.1 or 1.2. Most recent in France are v1.2 (blue pcb) -// These defines are set in platformio.ini build parameters, sample for U20 -DU20 -DTS_V12 -// U20_PLUS was not tested, as we do not have a printer to test. Print bed PID settings MUST be tuned for it. - -// Valid platformio.ini submodel values are U20_PLUS U20 U30 LK1 LK2 LK4 - -// Valid platformio.ini touchscreens are TS_V11 TS_V12 TS_V19 - -// 2 - Select the screen controller type. Most common is ILI9341 - First option. If your screen remains white, -// Try the alternate setting - this should enable ST7789V or ILI9328. For other LCDs... code is needed -// with the proper boot sequence to be developped. - -#define LCD_READ_ID 0xD3 // Read display identification information in reg ID4 0xD3, for ILI9341 screens -//#define LCD_READ_ID 0x04 // Read display identification information in reg ID1 0x04 - ST7789V / ILI9328 or others - -//=========================================================================== - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "Hobi, tpruvot" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 1 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 2 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_LONGER3D_LK -#endif - -// Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" -#ifdef U20 -#define CUSTOM_MACHINE_NAME "Alfawise U20" -#elif defined(U30) -#define CUSTOM_MACHINE_NAME "Alfawise U30" -#elif defined(U20_PLUS) -#define CUSTOM_MACHINE_NAME "Alfawise U20+" -#elif defined(LK1) -#define CUSTOM_MACHINE_NAME "Longer3D LK1" -#elif defined(LK2) -#define CUSTOM_MACHINE_NAME "Longer3D LK2" -#elif defined(LK4) -#define CUSTOM_MACHINE_NAME "Longer3D LK4" -#endif - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -#define PSU_NAME "360W 24V/15A" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Alfawise U30/U20 - // Please refine the PID settings for your own machine to avoid the E1 hotend error. These a basic settings allowing first startups. - // Use the command M303 E0 S200 C8 each time you make any changes to your extruder - - #define DEFAULT_Kp 17.22 - #define DEFAULT_Ki 1.00 - #define DEFAULT_Kd 74.22 - - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - //#define DEFAULT_bedKp 10.00 - //#define DEFAULT_bedKi .023 - //#define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - -#if defined(U30) || defined(LK2) || defined(LK4) - //From M303 command for Alfawise U30 : - #define DEFAULT_bedKp 338.46 - #define DEFAULT_bedKi 63.96 - #define DEFAULT_bedKd 447.78 -#endif - -#if defined(U20) || defined(LK1) - //From M303 command for Alfawise U20 : - #define DEFAULT_bedKp 841.68 - #define DEFAULT_bedKi 152.12 - #define DEFAULT_bedKd 1164.25 -#endif - -#ifdef U20_PLUS - // These PID setting MUST be updated. - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. - #define DEFAULT_bedKp 841.68 - #define DEFAULT_bedKi 152.12 - #define DEFAULT_bedKd 1164.25 -#endif - -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -//#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -//#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - #define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 98 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 200, 200, 100, 25 } - -#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 250, 250, 200, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 200, 200, 100, 3000 } - -#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 600, 600, 400, 6000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 200 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 200 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.4 - - #define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.10 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -#define PROBE_MANUALLY -#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #undef PROBE_MANUALLY - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { -35, -6, -0.5 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR false -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 10 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -#if defined(U30) || defined(LK2) || defined(LK4) -#define X_BED_SIZE 220 -#define Y_BED_SIZE 220 -#define Z_MACHINE_MAX 250 -#endif - -#if defined(U20) || defined(LK1) -#define X_BED_SIZE 300 -#define Y_BED_SIZE 300 -#define Z_MACHINE_MAX 400 -#endif - -#ifdef U20_PLUS -#define X_BED_SIZE 400 -#define Y_BED_SIZE 400 -#define Z_MACHINE_MAX 500 -#endif - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS Z_MACHINE_MAX - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING true // Set to true to invert the logic of the sensor. - //#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - * If false, use M420 S1 after G28 in your slicer print start gcode - */ -#define RESTORE_LEVELING_AFTER_G28 false - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 4 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 5 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 5 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.2 // (mm) Z height of nozzle at leveling points - #define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - //#define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT 4 -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (40*60) -#define HOMING_FEEDRATE_Z (7*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 200 -#define PREHEAT_1_TEMP_BED 60 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 250 -#define PREHEAT_2_TEMP_BED 100 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT -#define SDIO_SUPPORT // Note from Hobi : Added as was not present in the file... - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 250 -//#define LCD_FEEDBACK_FREQUENCY_HZ 1000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define TOUCH_CALIBRATION // Include user calibration widget in menus (Alfawise) - - #define BUTTON_DELAY_EDIT 75 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 100 // (ms) Button repeat delay for menus - - #if ENABLED(TS_V11) - // Alfawise U20 ILI9341 2.8 TP Ver 1.1 / Green PCB on the back of touchscreen - #define XPT2046_X_CALIBRATION 12000 - #define XPT2046_Y_CALIBRATION 9000 - #define XPT2046_X_OFFSET -24 - #define XPT2046_Y_OFFSET -17 - #endif - - #if ENABLED(TS_V12) - // Alfawise U30 ILI9341 2.8 TP Ver 1.2 / Blue PCB on the back of touchscreen - #define XPT2046_X_CALIBRATION 12000 - #define XPT2046_Y_CALIBRATION -9000 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 - #endif - - #if ENABLED(TS_V19) - // Longer LK4/U30 2.8" Ver 2019 / Blue PCB, SID240x320-8PCB-D - #define XPT2046_X_CALIBRATION -12000 - #define XPT2046_Y_CALIBRATION 9000 - #define XPT2046_X_OFFSET 320 - #define XPT2046_Y_OFFSET 0 - #endif -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h deleted file mode 100644 index 5151a8f2c4..0000000000 --- a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h +++ /dev/null @@ -1,2933 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 10 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 60 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 4, 4, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - #undef PROBE_MANUALLY - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - #define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - #define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - #define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28X" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - #define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - #define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE true // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES true // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - #define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - #define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - #define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - // see https://ee-programming-notepad.blogspot.com/2016/10/16-bit-color-generator-picker.html - #define TFT_MARLINUI_COLOR COLOR_WHITE - #define TFT_MARLINBG_COLOR COLOR_BLACK - #define TFT_DISABLED_COLOR 0x10A2 // almost black - #define TFT_BTCANCEL_COLOR COLOR_RED - #define TFT_BTARROWS_COLOR COLOR_WHITE - #define TFT_BTOKMENU_COLOR COLOR_BLUE -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -//#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - #define MESH_MIN_X _MAX(MESH_INSET, MIN_PROBE_EDGE) - #define MESH_MIN_Y _MAX(MESH_INSET, MIN_PROBE_EDGE) - #define MESH_MAX_X X_BED_SIZE - 35 // NOZZLE_TO_PROBE_OFFSET - #define MESH_MAX_Y Y_BED_SIZE - _MAX(MESH_INSET, MIN_PROBE_EDGE) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 32 -#else - #define BLOCK_BUFFER_SIZE 16 // Marlin default -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 8 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 25 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Alfawise/U20-bltouch/_Statusscreen.h b/config/examples/Alfawise/U20-bltouch/_Statusscreen.h deleted file mode 100644 index 519c0d06f4..0000000000 --- a/config/examples/Alfawise/U20-bltouch/_Statusscreen.h +++ /dev/null @@ -1,77 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ - -/** - * Custom Status Screen bitmap - * - * Place this file in the root with your configuration files - * and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h. - * - * Use the Marlin Bitmap Converter to make your own: - * http://marlinfw.org/tools/u8glib/converter.html - */ - -#pragma once - -// -// Status Screen Logo bitmap -// -#define STATUS_LOGO_Y 0 -#define STATUS_LOGO_WIDTH 38 - -static unsigned char status_logo_bmp[] PROGMEM = { - B11111111,B11111111,B11111111,B11111111,B11111100, - B10000000,B00000000,B00010000,B00000111,B11111100, - B10000000,B00000000,B00010000,B00000000,B11111100, - B10000000,B00000000,B00110000,B00000000,B01111100, - B10000000,B00000000,B00110000,B00000000,B00111100, - B10000000,B00000000,B01110000,B00000000,B00011100, - B11111111,B10000000,B01110000,B00000000,B00001100, - B11111111,B10000000,B11110000,B11100000,B00001100, - B11111111,B00000000,B11110000,B11111000,B00001100, - B11111111,B00000001,B11110000,B11111100,B00000100, - B11111110,B00000001,B11110000,B11010010,B00000100, - B11111110,B00000011,B11110000,B10101110,B00000100, - B11111100,B00000000,B11110000,B10101111,B00000100, - B11111100,B00000000,B00110000,B10000011,B00000100, - B11111000,B00000000,B00110000,B11111111,B00000100, - B11111000,B00000000,B00010000,B11111111,B00000100, - B11111111,B11100000,B00010000,B10111111,B00000100, - B11111111,B11110000,B00010000,B10101111,B00000100, - B11111111,B11110000,B00010000,B10101110,B00000100, - B11111111,B11110000,B00010000,B10000010,B00000100, - B10000011,B11110000,B00010000,B11111100,B00000100, - B10000001,B11110000,B00010000,B11111000,B00001100, - B10000001,B11100000,B00010000,B11100000,B00001100, - B10000000,B00000000,B00010000,B00000000,B00001100, - B10000000,B00000000,B00110000,B00000000,B00011100, - B11000000,B00000000,B00110000,B00000000,B00111100, - B11000000,B00000000,B01110000,B00000000,B01111100, - B11100000,B00000000,B11110000,B00000000,B11111100, - B11111000,B00000011,B11110000,B00000111,B11111100 -}; - -// -// Use default bitmaps -// -#define STATUS_HOTEND_ANIM -#define STATUS_BED_ANIM -#define STATUS_LOGO_X 0 -#define STATUS_HEATERS_X 50 -#define STATUS_BED_X 74 diff --git a/config/examples/Alfawise/U20/Configuration.h b/config/examples/Alfawise/U20/Configuration.h deleted file mode 100644 index cf218cde10..0000000000 --- a/config/examples/Alfawise/U20/Configuration.h +++ /dev/null @@ -1,2326 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -//=========================================================================== -//============================= Alfawise Printer ============================ -//=========================================================================== - -// Forum link to help with a tutorial, in French! : -// https://www.lesimprimantes3d.fr/forum/topic/18260-alfawise-u20x-u30-marlin-2x-firmware-alternatif/ -// -// 1 - Select your Alfawise U30 or U20 or U20+ printer (NO MORE REQUIRED HERE) -// and the touchscreen version, either 1.1 or 1.2. Most recent in France are v1.2 (blue pcb) -// These defines are set in platformio.ini build parameters, sample for U20 -DU20 -DTS_V12 -// U20_PLUS was not tested, as we do not have a printer to test. Print bed PID settings MUST be tuned for it. - -// Valid platformio.ini submodel values are U20_PLUS U20 U30 LK1 LK2 LK4 - -// Valid platformio.ini touchscreens are TS_V11 TS_V12 TS_V19 - -// 2 - Select the screen controller type. Most common is ILI9341 - First option. If your screen remains white, -// Try the alternate setting - this should enable ST7789V or ILI9328. For other LCDs... code is needed -// with the proper boot sequence to be developped. - -#define LCD_READ_ID 0xD3 // Read display identification information in reg ID4 0xD3, for ILI9341 screens -//#define LCD_READ_ID 0x04 // Read display identification information in reg ID1 0x04 - ST7789V / ILI9328 or others - -//=========================================================================== - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "Hobi, tpruvot" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 1 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 2 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_LONGER3D_LK -#endif - -// Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" -#ifdef U20 -#define CUSTOM_MACHINE_NAME "Alfawise U20" -#elif defined(U30) -#define CUSTOM_MACHINE_NAME "Alfawise U30" -#elif defined(U20_PLUS) -#define CUSTOM_MACHINE_NAME "Alfawise U20+" -#elif defined(LK1) -#define CUSTOM_MACHINE_NAME "Longer3D LK1" -#elif defined(LK2) -#define CUSTOM_MACHINE_NAME "Longer3D LK2" -#elif defined(LK4) -#define CUSTOM_MACHINE_NAME "Longer3D LK4" -#endif - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -#define PSU_NAME "360W 24V/15A" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Alfawise U30/U20 - // Please refine the PID settings for your own machine to avoid the E1 hotend error. These a basic settings allowing first startups. - // Use the command M303 E0 S200 C8 each time you make any changes to your extruder - - #define DEFAULT_Kp 17.22 - #define DEFAULT_Ki 1.00 - #define DEFAULT_Kd 74.22 - - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - //#define DEFAULT_bedKp 10.00 - //#define DEFAULT_bedKi .023 - //#define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - -#if defined(U30) || defined(LK2) || defined(LK4) - //From M303 command for Alfawise U30 : - #define DEFAULT_bedKp 338.46 - #define DEFAULT_bedKi 63.96 - #define DEFAULT_bedKd 447.78 -#endif - -#if defined(U20) || defined(LK1) - //From M303 command for Alfawise U20 : - #define DEFAULT_bedKp 841.68 - #define DEFAULT_bedKi 152.12 - #define DEFAULT_bedKd 1164.25 -#endif - -#ifdef U20_PLUS - // These PID setting MUST be updated. - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. - #define DEFAULT_bedKp 841.68 - #define DEFAULT_bedKi 152.12 - #define DEFAULT_bedKd 1164.25 -#endif - -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -//#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -//#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 98 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 200, 200, 100, 25 } - -#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 250, 250, 200, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 200, 200, 100, 3000 } - -#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 600, 600, 400, 6000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 200 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 200 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.4 - - #define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.10 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -#define PROBE_MANUALLY -#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #undef PROBE_MANUALLY - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR false -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 10 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -#if defined(U30) || defined(LK2) || defined(LK4) -#define X_BED_SIZE 220 -#define Y_BED_SIZE 220 -#define Z_MACHINE_MAX 250 -#endif - -#if defined(U20) || defined(LK1) -#define X_BED_SIZE 300 -#define Y_BED_SIZE 300 -#define Z_MACHINE_MAX 400 -#endif - -#ifdef U20_PLUS -#define X_BED_SIZE 400 -#define Y_BED_SIZE 400 -#define Z_MACHINE_MAX 500 -#endif - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS Z_MACHINE_MAX - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING true // Set to true to invert the logic of the sensor. - //#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.2 // (mm) Z height of nozzle at leveling points - #define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT 4 // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (40*60) -#define HOMING_FEEDRATE_Z (7*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 200 -#define PREHEAT_1_TEMP_BED 60 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 250 -#define PREHEAT_2_TEMP_BED 100 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT -#define SDIO_SUPPORT // Note from Hobi : Added as was not present in the file... - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 250 -//#define LCD_FEEDBACK_FREQUENCY_HZ 1000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define TOUCH_CALIBRATION // Include user calibration widget in menus (Alfawise) - - #define BUTTON_DELAY_EDIT 75 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 100 // (ms) Button repeat delay for menus - - #if ENABLED(TS_V11) - // Alfawise U20 ILI9341 2.8 TP Ver 1.1 / Green PCB on the back of touchscreen - #define XPT2046_X_CALIBRATION 12000 - #define XPT2046_Y_CALIBRATION 9000 - #define XPT2046_X_OFFSET -24 - #define XPT2046_Y_OFFSET -17 - #endif - - #if ENABLED(TS_V12) - // Alfawise U30 ILI9341 2.8 TP Ver 1.2 / Blue PCB on the back of touchscreen - #define XPT2046_X_CALIBRATION 12000 - #define XPT2046_Y_CALIBRATION -9000 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 - #endif - - #if ENABLED(TS_V19) - // Longer LK4/U30 2.8" Ver 2019 / Blue PCB, SID240x320-8PCB-D - #define XPT2046_X_CALIBRATION -12000 - #define XPT2046_Y_CALIBRATION 9000 - #define XPT2046_X_OFFSET 320 - #define XPT2046_Y_OFFSET 0 - #endif -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Alfawise/U20/Configuration_adv.h b/config/examples/Alfawise/U20/Configuration_adv.h deleted file mode 100644 index d6d6398445..0000000000 --- a/config/examples/Alfawise/U20/Configuration_adv.h +++ /dev/null @@ -1,2932 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 10 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 60 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 4, 4, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - #define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - #define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28X" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - #define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - #define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE true // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES true // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - #define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - #define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - #define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - // see https://ee-programming-notepad.blogspot.com/2016/10/16-bit-color-generator-picker.html - #define TFT_MARLINUI_COLOR COLOR_WHITE - #define TFT_MARLINBG_COLOR COLOR_BLACK - #define TFT_DISABLED_COLOR 0x10A2 // almost black - #define TFT_BTCANCEL_COLOR COLOR_RED - #define TFT_BTARROWS_COLOR COLOR_WHITE - #define TFT_BTOKMENU_COLOR COLOR_BLUE -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -//#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 32 -#else - #define BLOCK_BUFFER_SIZE 16 // Marlin default -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 8 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 25 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Alfawise/U20/_Statusscreen.h b/config/examples/Alfawise/U20/_Statusscreen.h deleted file mode 100644 index 519c0d06f4..0000000000 --- a/config/examples/Alfawise/U20/_Statusscreen.h +++ /dev/null @@ -1,77 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ - -/** - * Custom Status Screen bitmap - * - * Place this file in the root with your configuration files - * and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h. - * - * Use the Marlin Bitmap Converter to make your own: - * http://marlinfw.org/tools/u8glib/converter.html - */ - -#pragma once - -// -// Status Screen Logo bitmap -// -#define STATUS_LOGO_Y 0 -#define STATUS_LOGO_WIDTH 38 - -static unsigned char status_logo_bmp[] PROGMEM = { - B11111111,B11111111,B11111111,B11111111,B11111100, - B10000000,B00000000,B00010000,B00000111,B11111100, - B10000000,B00000000,B00010000,B00000000,B11111100, - B10000000,B00000000,B00110000,B00000000,B01111100, - B10000000,B00000000,B00110000,B00000000,B00111100, - B10000000,B00000000,B01110000,B00000000,B00011100, - B11111111,B10000000,B01110000,B00000000,B00001100, - B11111111,B10000000,B11110000,B11100000,B00001100, - B11111111,B00000000,B11110000,B11111000,B00001100, - B11111111,B00000001,B11110000,B11111100,B00000100, - B11111110,B00000001,B11110000,B11010010,B00000100, - B11111110,B00000011,B11110000,B10101110,B00000100, - B11111100,B00000000,B11110000,B10101111,B00000100, - B11111100,B00000000,B00110000,B10000011,B00000100, - B11111000,B00000000,B00110000,B11111111,B00000100, - B11111000,B00000000,B00010000,B11111111,B00000100, - B11111111,B11100000,B00010000,B10111111,B00000100, - B11111111,B11110000,B00010000,B10101111,B00000100, - B11111111,B11110000,B00010000,B10101110,B00000100, - B11111111,B11110000,B00010000,B10000010,B00000100, - B10000011,B11110000,B00010000,B11111100,B00000100, - B10000001,B11110000,B00010000,B11111000,B00001100, - B10000001,B11100000,B00010000,B11100000,B00001100, - B10000000,B00000000,B00010000,B00000000,B00001100, - B10000000,B00000000,B00110000,B00000000,B00011100, - B11000000,B00000000,B00110000,B00000000,B00111100, - B11000000,B00000000,B01110000,B00000000,B01111100, - B11100000,B00000000,B11110000,B00000000,B11111100, - B11111000,B00000011,B11110000,B00000111,B11111100 -}; - -// -// Use default bitmaps -// -#define STATUS_HOTEND_ANIM -#define STATUS_BED_ANIM -#define STATUS_LOGO_X 0 -#define STATUS_HEATERS_X 50 -#define STATUS_BED_X 74 diff --git a/config/examples/AliExpress/CL-260/Configuration.h b/config/examples/AliExpress/CL-260/Configuration.h deleted file mode 100644 index 46c07524e1..0000000000 --- a/config/examples/AliExpress/CL-260/Configuration.h +++ /dev/null @@ -1,2226 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, CL-260)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "CL-260" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - #define DEFAULT_Kp 22.2 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 800 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -//#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 160.6 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR 1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 220 -#define Y_BED_SIZE 220 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 260 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/AliExpress/CL-260/README.txt b/config/examples/AliExpress/CL-260/README.txt deleted file mode 100644 index b8d6856a65..0000000000 --- a/config/examples/AliExpress/CL-260/README.txt +++ /dev/null @@ -1,15 +0,0 @@ -This is an example configuration for the CL-260 Ultimaker 2 clone. -Change Z_MAX_POS to 300 for the CL-260MAX. - -(The printer is available on AliExpress; be aware that this is not a beginner's -printer -- it needs tweaking and some parts replaced before being decent.) - -The printer comes with a quite old Marlin, the sources are available here: -http://www.thingiverse.com/thing:1635830/ and I recommend replacing them. - -The setting "works" for my printer and the extruder using my calibration value. -You might want to tweak some settings, e.g enable EEPROM, increase default Z speed, adjust homing speeds,... - -Have fun! --- -tobi diff --git a/config/examples/AliExpress/UM2pExt/Configuration.h b/config/examples/AliExpress/UM2pExt/Configuration.h deleted file mode 100644 index 41215592ba..0000000000 --- a/config/examples/AliExpress/UM2pExt/Configuration.h +++ /dev/null @@ -1,2237 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_ULTIMAIN_2 -#endif - -// Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 2 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 2.85 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 20 -#define TEMP_SENSOR_1 20 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 20 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 130 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker2+ - -#define DEFAULT_Kp 9.74 -#define DEFAULT_Ki 0.69 -#define DEFAULT_Kd 34.32 - - /* - #define DEFAULT_Kp 10.03 - #define DEFAULT_Ki 1.50 - #define DEFAULT_Kd 70.0 - */ - - //#define DEFAULT_Kp 22.2 - //#define DEFAULT_Ki 1.08 - //#define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 1000 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -//#define USE_YMIN_PLUG -//#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -#define USE_YMAX_PLUG -#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 200, 355 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 40, 45} - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -#define PROBE_MANUALLY -#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR false -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR true -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR 1 -#define Z_HOME_DIR 1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 220 -#define Y_BED_SIZE 220 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 300 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - #define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (100*60) -#define HOMING_FEEDRATE_Z (40*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 CYRILLIC - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h deleted file mode 100644 index 9bf6ae9b29..0000000000 --- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h +++ /dev/null @@ -1,2933 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -//#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 255 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - #define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -#define PWM_MOTOR_CURRENT { 1200, 1200, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - #define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G27" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - #define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -//#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 128 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define FILAMENT_BOWDEN_LENGTH 705 // (mm) - - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 80 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH (FILAMENT_BOWDEN_LENGTH + 50) // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 80 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH (FILAMENT_BOWDEN_LENGTH - 50) // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 0 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Anet/A2/Configuration.h b/config/examples/Anet/A2/Configuration.h deleted file mode 100644 index 21c99dac50..0000000000 --- a/config/examples/Anet/A2/Configuration.h +++ /dev/null @@ -1,2228 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(Modmike, Anet A2)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_ANET_10 -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Anet A2" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 5 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 5 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - #define DEFAULT_Kp 22.2 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 400, 95 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -//#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -//#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -//#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -//#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -//#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR false -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 220 -#define Y_BED_SIZE 220 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 200 -#define PREHEAT_1_TEMP_BED 60 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 230 -#define PREHEAT_2_TEMP_BED 100 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -//#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -// Note: Details on connecting to the Anet V1.0 controller are in the file pins_ANET_10.h -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h deleted file mode 100644 index fa99f437b5..0000000000 --- a/config/examples/Anet/A2/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Anet/A2plus/Configuration.h b/config/examples/Anet/A2plus/Configuration.h deleted file mode 100644 index f4f28ba97d..0000000000 --- a/config/examples/Anet/A2plus/Configuration.h +++ /dev/null @@ -1,2228 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(Modmike, Anet A2 Plus)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_ANET_10 -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Anet A2+" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 5 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 5 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - #define DEFAULT_Kp 22.2 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 400, 95 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -//#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -//#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -//#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -//#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -//#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR false -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 220 -#define Y_BED_SIZE 270 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 200 -#define PREHEAT_1_TEMP_BED 60 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 230 -#define PREHEAT_2_TEMP_BED 100 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -//#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -// Note: Details on connecting to the Anet V1.0 controller are in the file pins_ANET_10.h -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h deleted file mode 100644 index fa99f437b5..0000000000 --- a/config/examples/Anet/A2plus/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Anet/A6/Configuration.h b/config/examples/Anet/A6/Configuration.h deleted file mode 100644 index ed50931da6..0000000000 --- a/config/examples/Anet/A6/Configuration.h +++ /dev/null @@ -1,2343 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(Ralf_E, ANET A6 config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 115200 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_ANET_10 -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Anet A6" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// The Anet A6 original extruder is designed for 1.75mm -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 11 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 11 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 130 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - //#define DEFAULT_Kp 22.2 - //#define DEFAULT_Ki 1.08 - //#define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - - // ANET A6 Firmware V2.0 Standard Extruder defaults: - // PID-P: +022.20, PID-I: +001.08, PID-D: +114.00, PID-C: 1 - //#define DEFAULT_Kp 22.2 - //#define DEFAULT_Ki 1.08 - //#define DEFAULT_Kd 114.0 - - // Tuned by ralf-e. Always re-tune for your machine! - #define DEFAULT_Kp 16.83 - #define DEFAULT_Ki 1.02 - #define DEFAULT_Kd 69.29 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - //#define DEFAULT_bedKp 10.00 - //#define DEFAULT_bedKi .023 - //#define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // ANET A6 - // original Bed + 0.3mm Heat conducting into 4mm borosilicate (PID-Autotune: M303 E-1 S60 C5): - //#define DEFAULT_bedKp 295.00 - //#define DEFAULT_bedKi 35.65 - //#define DEFAULT_bedKd 610.21 - #define DEFAULT_bedKp 295.00 - #define DEFAULT_bedKi 35.65 - #define DEFAULT_bedKd 610.21 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -//#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 500 } - -// ANET A6 Firmwae V2.0 defaults: (steps/mm) -// Xsteps/mm: +100.0, Ysteps/mm: +100.0, Zsteps/mm: +0400.0, eSteps/mm: +0095.0 -#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 400, 95 } -//#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 95 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -//#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } - -// ANET A6 Firmware V2.0 defaults (Vmax): -// Vmax x: 400, Vmax y: 400, Vmax z: 4, Vmax e: 25 -#define DEFAULT_MAX_FEEDRATE { 400, 400, 4, 25 } -//#define DEFAULT_MAX_FEEDRATE { 400, 400, 20, 50 } - - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -//#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } - -// ANET A6 Firmware V2.0 defaults (Amax): -// Amx x: 9000, Amax Y: 5000, Amax z: 50, Amax e: 10000 -#define DEFAULT_MAX_ACCELERATION { 9000, 5000, 50, 10000 } -//#define DEFAULT_MAX_ACCELERATION { 10000, 10000, 200, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ - -// ANET A6 Firmware V2.0 defaults: -// Accel: 1000 A-retract: 1000 -#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - // ANET A6 Firmware V2.0 defaults: - // XY: 10, Z: +000.30, E: 5 - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.04 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -//#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// ANET A8: FRONT-MOUNTED SENSOR WITH 3D PRINTED MOUNT -//#define NOZZLE_TO_PROBE_OFFSET { -28, -45, 0 } - -// THESE ARE FOR THE OFFICIAL ANET REAR-MOUNTED SENSOR -//#define NOZZLE_TO_PROBE_OFFSET { -1, 3, 0 } - -// ANET A6 with BLTouch/3D-Touch mounted right to the nozzle -#define NOZZLE_TO_PROBE_OFFSET { 39, 0, 0 } - -//ANET A6 with BLTouch/3D-Touch betwen Fan and Belt -// (mount: https://github.com/ralf-e/ANET_A6_modifications/tree/master/A6_X-Axis) -//#define NOZZLE_TO_PROBE_OFFSET { -30, 15, 0.75 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 -//#define XY_PROBE_SPEED 6000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 3) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#if 1 // 0 for less clearance - #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow - #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points - //#define Z_AFTER_PROBING 5 // Z position after probing is done -#else - #define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow - #define Z_CLEARANCE_BETWEEN_PROBES 3 // Z Clearance between probe points - //#define Z_AFTER_PROBING 3 // Z position after probing is done -#endif - -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -//#define INVERT_Y_DIR true -//#define INVERT_Z_DIR false -//ANET A6: -#define INVERT_Y_DIR false -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -//#define X_BED_SIZE 200 -//#define Y_BED_SIZE 200 - -// Travel limits (mm) after homing, corresponding to endstop positions. -//#define X_MIN_POS 0 -//#define Y_MIN_POS 0 -//#define X_MAX_POS X_BED_SIZE -//#define Y_MAX_POS Y_BED_SIZE -//#define Z_MIN_POS 0 -//#define Z_MAX_POS 200 - -// ANET A6 Firmware V2.0 defaults: -//#define X_BED_SIZE 220 -//#define Y_BED_SIZE 220 -//#define X_MIN_POS 0 -//#define Y_MIN_POS 0 -//#define Z_MIN_POS 0 -//#define Z_MAX_POS 250 - -// ANET A6, X0/Y0 0 front left bed edge : -#define X_BED_SIZE 222 -#define Y_BED_SIZE 222 -#define X_MIN_POS -3 -#define Y_MIN_POS -5 -#define Z_MIN_POS 0 -#define Z_MAX_POS 230 - -// ANET A6 with new X-Axis / modded Y-Axis: -//#define X_BED_SIZE 235 -//#define Y_BED_SIZE 230 -//#define X_MIN_POS 0 -//#define Y_MIN_POS 0 -//#define Z_MIN_POS 0 -//#define Z_MAX_POS 230 - -// ANET A6 with new X-Axis / modded Y-Axis, X0/Y0 0 front left bed edge : -//#define X_BED_SIZE 227 -//#define Y_BED_SIZE 224 -//#define X_MIN_POS -8 -//#define Y_MIN_POS -6 -//#define Z_MIN_POS 0 -//#define Z_MAX_POS 230 - -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 4 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 5 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// ANET A6 with new X-Axis / modded Y-Axis: -//#define MANUAL_X_HOME_POS X_MIN_POS - 8 -//#define MANUAL_Y_HOME_POS Y_MIN_POS - 6 -//#define MANUAL_Z_HOME_POS Z_MIN_POS - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). - - //Anet A6 with new X-Axis - //#define Z_SAFE_HOMING_X_POINT 113 // X point for Z homing when homing all axes (G28). - //#define Z_SAFE_HOMING_Y_POINT 112 // Y point for Z homing when homing all axes (G28). - - //Anet A6 with new X-Axis and defined X_HOME_POS -7, Y_HOME_POS -6 - //#define Z_SAFE_HOMING_X_POINT 107 // X point for Z homing when homing all axes (G28). - //#define Z_SAFE_HOMING_Y_POINT 107 // Y point for Z homing when homing all axes (G28). - -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 200 -#define PREHEAT_1_TEMP_BED 50 -#define PREHEAT_1_FAN_SPEED 0 // ANET A6 Default is 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 230 -#define PREHEAT_2_TEMP_BED 70 -#define PREHEAT_2_FAN_SPEED 0 // ANET A6 Default is 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 40 -#define LCD_FEEDBACK_FREQUENCY_HZ 200 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -// Note: Details on connecting to the Anet V1.0 controller are in the file pins_ANET_10.h -// -#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER -#define ST7920_DELAY_1 DELAY_NS(150) -#define ST7920_DELAY_2 DELAY_NS(150) -#define ST7920_DELAY_3 DELAY_NS(150) -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h deleted file mode 100644 index 6671e83c61..0000000000 --- a/config/examples/Anet/A6/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 10 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 60 // Seconds - #define WATCH_TEMP_INCREASE 5 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 180 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -//#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - //#define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Anet/A6/_Statusscreen.h b/config/examples/Anet/A6/_Statusscreen.h deleted file mode 100755 index 4547f3fd44..0000000000 --- a/config/examples/Anet/A6/_Statusscreen.h +++ /dev/null @@ -1,56 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Custom Status Screen bitmap - * - * Place this file in the root with your configuration files - * and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h. - * - * Use the Marlin Bitmap Converter to make your own: - * http://marlinfw.org/tools/u8glib/converter.html - */ - -// -// Status Screen Logo bitmap -// -#define STATUS_LOGO_Y 10 -#define STATUS_LOGO_WIDTH 40 - -const unsigned char status_logo_bmp[] PROGMEM = { - B01110000,B00000000,B00001000,B00000011,B10001110, - B10001000,B00000000,B00001000,B00000100,B01010000, - B10001010,B11000111,B00111110,B00000100,B01010000, - B11111011,B00101000,B10001000,B00000111,B11001110, - B10001010,B00101111,B00001000,B00000100,B01010001, - B10001010,B00101000,B00001000,B00000100,B01010001, - B10001010,B00100111,B00000110,B00000100,B01001110 -}; - -// -// Use default bitmaps -// -#define STATUS_HOTEND_ANIM -#define STATUS_BED_ANIM -#define STATUS_HEATERS_X 48 -#define STATUS_BED_X 74 diff --git a/config/examples/Anet/A8/Configuration.h b/config/examples/Anet/A8/Configuration.h deleted file mode 100644 index bdf20253d2..0000000000 --- a/config/examples/Anet/A8/Configuration.h +++ /dev/null @@ -1,2254 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(Bob Kuhn, Anet config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 115200 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_ANET_10 -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Anet A8" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -// The Anet A8 original extruder is designed for 1.75mm -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 5 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 5 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 6 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 6 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 130 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 15 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - //#define DEFAULT_Kp 21.0 - //#define DEFAULT_Ki 1.25 - //#define DEFAULT_Kd 86.0 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - - // ANET A8 Standard Extruder at 210 Degree Celsius and 100% Fan - //(measured after M106 S255 with M303 E0 S210 C8) - #define DEFAULT_Kp 21.0 - #define DEFAULT_Ki 1.25 - #define DEFAULT_Kd 86.0 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - //#define DEFAULT_bedKp 10.00 - //#define DEFAULT_bedKi .023 - //#define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // ANET A8 - // original Bed + 0.3mm Heat conducting into 4mm borosilicate (PID-Autotune: M303 E-1 S60 C5): - #define DEFAULT_bedKp 295.00 - #define DEFAULT_bedKi 35.65 - #define DEFAULT_bedKd 610.21 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 160 // 160 guards against false tripping when the extruder fan kicks on. - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 400, 100 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 400, 400, 8, 50 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 2000, 2000, 100, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 400 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.10 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 6000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR false -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 220 -#define Y_BED_SIZE 220 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS -33 -#define Y_MIN_POS -10 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 240 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - #define PROBE_PT_1_X 20 - #define PROBE_PT_1_Y 160 - #define PROBE_PT_2_X 20 - #define PROBE_PT_2_Y 10 - #define PROBE_PT_3_X 180 - #define PROBE_PT_3_Y 10 -#endif - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (100*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -//#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -//#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 190 -#define PREHEAT_1_TEMP_BED 60 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 90 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -// Note: Details on connecting to the Anet V1.0 controller are in the file pins_ANET_10.h -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h deleted file mode 100644 index c42714b6bd..0000000000 --- a/config/examples/Anet/A8/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 10 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 180 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -//#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - //#define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Anet/A8/_Statusscreen.h b/config/examples/Anet/A8/_Statusscreen.h deleted file mode 100755 index ddd62ea532..0000000000 --- a/config/examples/Anet/A8/_Statusscreen.h +++ /dev/null @@ -1,56 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Custom Status Screen bitmap - * - * Place this file in the root with your configuration files - * and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h. - * - * Use the Marlin Bitmap Converter to make your own: - * http://marlinfw.org/tools/u8glib/converter.html - */ - -// -// Status Screen Logo bitmap -// -#define STATUS_LOGO_Y 10 -#define STATUS_LOGO_WIDTH 40 - -const unsigned char status_logo_bmp[] PROGMEM = { - B01110000,B00000000,B00001000,B00000011,B10001110, - B10001000,B00000000,B00001000,B00000100,B01010001, - B10001010,B11000111,B00111110,B00000100,B01010001, - B11111011,B00101000,B10001000,B00000111,B11001110, - B10001010,B00101111,B00001000,B00000100,B01010001, - B10001010,B00101000,B00001000,B00000100,B01010001, - B10001010,B00100111,B00000110,B00000100,B01001110 -}; - -// -// Use default bitmaps -// -#define STATUS_HOTEND_ANIM -#define STATUS_BED_ANIM -#define STATUS_HEATERS_X 48 -#define STATUS_BED_X 74 diff --git a/config/examples/Anet/A8plus/Configuration.h b/config/examples/Anet/A8plus/Configuration.h deleted file mode 100644 index dc3ccfc9b0..0000000000 --- a/config/examples/Anet/A8plus/Configuration.h +++ /dev/null @@ -1,2237 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(Martin Zeman - Zemistr, Anet A8 Plus)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 115200 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_ANET_10 -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Anet A8 plus" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -// The Anet A8 original extruder is designed for 1.75mm -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 5 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 5 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 6 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 6 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 130 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 15 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - //#define DEFAULT_Kp 21.0 - //#define DEFAULT_Ki 1.25 - //#define DEFAULT_Kd 86.0 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - - // ANET A8 Standard Extruder at 210 Degree Celsius and 100% Fan - //(measured after M106 S255 with M303 E0 S210 C8) - #define DEFAULT_Kp 49.19 - #define DEFAULT_Ki 6.33 - #define DEFAULT_Kd 95.60 -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - //#define DEFAULT_bedKp 10.00 - //#define DEFAULT_bedKi .023 - //#define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // ANET A8 - // original Bed + 0.3mm Heat conducting into 4mm borosilicate (PID-Autotune: M303 E-1 S60 C5): - #define DEFAULT_bedKp 22.20 - #define DEFAULT_bedKi 1.08 - #define DEFAULT_bedKd 114.00 - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 160 // 160 guards against false tripping when the extruder fan kicks on. - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 95 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 400, 400, 50, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 2000, 2000, 100, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 400 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.10 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR true -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 300 -#define Y_BED_SIZE 300 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS -26 -#define Y_MIN_POS -6 -#define Z_MIN_POS 0 -#define X_MAX_POS 300 -#define Y_MAX_POS 297 -#define Z_MAX_POS 370 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (100*60) -#define HOMING_FEEDRATE_Z (6*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 205 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "PET-G" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 90 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Anet/A8plus/Configuration_adv.h b/config/examples/Anet/A8plus/Configuration_adv.h deleted file mode 100644 index 2ffcf18600..0000000000 --- a/config/examples/Anet/A8plus/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -//#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - //#define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY\nG91\nG1 F1000 Z+20\nG1 F5000 Y" STRINGIFY(Y_MAX_POS) "\nG90\nM84 X Y E" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - #define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -//#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - #define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Anet/A8plus/_Statusscreen.h b/config/examples/Anet/A8plus/_Statusscreen.h deleted file mode 100755 index 1235997b79..0000000000 --- a/config/examples/Anet/A8plus/_Statusscreen.h +++ /dev/null @@ -1,66 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Custom Status Screen bitmap - * - * Place this file in the root with your configuration files - * and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h. - * - * Use the Marlin Bitmap Converter to make your own: - * http://marlinfw.org/tools/u8glib/converter.html - */ - -// -// Status Screen Logo bitmap -// -#define STATUS_LOGO_Y 6 -#define STATUS_LOGO_WIDTH 40 - -const unsigned char status_logo_bmp[] PROGMEM = { - B01110000,B00000000,B00001000,B00000011,B10001110, - B10001000,B00000000,B00001000,B00000100,B01010001, - B10001010,B11000111,B00111110,B00000100,B01010001, - B11111011,B00101000,B10001000,B00000111,B11001110, - B10001010,B00101111,B00001000,B00000100,B01010001, - B10001010,B00101000,B00001000,B00000100,B01010001, - B10001010,B00100111,B00000110,B00000100,B01001110, - B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00001110,B01000000,B00000000,B00000000, - B00000000,B00010001,B01000000,B00000000,B00000000, - B00000000,B00010001,B01010001,B00111000,B00000000, - B00000000,B00011110,B01010001,B01000000,B00000000, - B00000000,B00010000,B01010001,B00111000,B00000000, - B00000000,B00010000,B01010001,B00000100,B00000000, - B00000000,B00010000,B01001110,B00111000,B00000000 -}; - -// -// Use default bitmaps -// -#define STATUS_HOTEND_ANIM -#define STATUS_BED_ANIM -#define STATUS_HEATERS_X 48 -#define STATUS_BED_X 74 diff --git a/config/examples/Anet/E10/Configuration.h b/config/examples/Anet/E10/Configuration.h deleted file mode 100644 index 732a63b91a..0000000000 --- a/config/examples/Anet/E10/Configuration.h +++ /dev/null @@ -1,2229 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "default" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_ANET_10 -#endif - -// Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 5 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 5 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 305 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 120 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - #define DEFAULT_Kp 22.2 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 24.14 - #define DEFAULT_bedKi 1.49 - #define DEFAULT_bedKd 97.91 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 400 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 95 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.04 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -#define PROBE_MANUALLY -#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED HOMING_FEEDRATE_XY - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR true -#define INVERT_E2_DIR true -#define INVERT_E3_DIR true -#define INVERT_E4_DIR true -#define INVERT_E5_DIR true - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -#define Z_HOMING_HEIGHT 10 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 220 -#define Y_BED_SIZE 270 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS -5 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 290 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - //#define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 5 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - #define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 5.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (40*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 200 -#define PREHEAT_1_TEMP_BED 60 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 250 -#define PREHEAT_2_TEMP_BED 100 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS), (Y_MAX_POS), 10 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER -#define ST7920_DELAY_1 DELAY_NS(250) -#define ST7920_DELAY_2 DELAY_NS(250) -#define ST7920_DELAY_3 DELAY_NS(250) - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Anet/E10/Configuration_adv.h b/config/examples/Anet/E10/Configuration_adv.h deleted file mode 100644 index 324b422ff4..0000000000 --- a/config/examples/Anet/E10/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 12 // Degrees Celsius - - #define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - #define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 30 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 80 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -//#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 40 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - #define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -#define LCD_TIMEOUT_TO_STATUS 60000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G27" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - //#define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - #define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 2000 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - #define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - #define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - #define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - #define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Anet/E16/Configuration.h b/config/examples/Anet/E16/Configuration.h deleted file mode 100644 index 040caf02ec..0000000000 --- a/config/examples/Anet/E16/Configuration.h +++ /dev/null @@ -1,2238 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "InsanityAutomation" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_ANET_10 -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "AnetE16V1.3" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 5 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 5 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 305 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 120 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - //#define DEFAULT_Kp 22.2 - //#define DEFAULT_Ki 1.08 - //#define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - - // ANET E16 Standard Extruder at 210 Degree Celsius and 100% Fan - //(measured after M106 S255 with M303 E0 S210 C8) - #define DEFAULT_Kp 21.0 - #define DEFAULT_Ki 1.25 - #define DEFAULT_Kd 86.0 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - //#define DEFAULT_bedKp 10.00 - //#define DEFAULT_bedKi .023 - //#define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // ANET E16 - // original Bed 4mm glass plate (PID-Autotune: M303 E-1 S60 C5): - #define DEFAULT_bedKp 295.00 - #define DEFAULT_bedKi 35.65 - #define DEFAULT_bedKd 610.21 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 400, 100 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 50, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 2000, 2000, 100, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.04 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 300 -#define Y_BED_SIZE 300 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS -2 -#define Y_MIN_POS -23 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 400 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - //#define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MIN_POS + 10), 10 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Anet/E16/Configuration_adv.h b/config/examples/Anet/E16/Configuration_adv.h deleted file mode 100644 index d3f3778222..0000000000 --- a/config/examples/Anet/E16/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 12 // Degrees Celsius - - #define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - #define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 30 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 80 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -//#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - #define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - //#define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - #define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - #define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - #define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - #define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - #define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Anet/E16/_Bootscreen.h b/config/examples/Anet/E16/_Bootscreen.h deleted file mode 100644 index f15e2d5f5f..0000000000 --- a/config/examples/Anet/E16/_Bootscreen.h +++ /dev/null @@ -1,73 +0,0 @@ -/** - * Made with Marlin Bitmap Converter - * http://marlinfw.org/tools/u8glib/converter.html - * - * This bitmap from the file '3dpc_tech_bootscreen.bmp' - */ -#define CUSTOM_BOOTSCREEN_BMPWIDTH 128 -const unsigned char custom_start_bmp[] PROGMEM = { - B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111, - B11111111,B00000000,B00001111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11000000,B00000000,B11111111, - B11111110,B00000000,B11111111,B11111110,B00000111,B11111111,B11111111,B00000001,B11111111,B11111111,B11100000,B00000011,B11111111,B11111000,B00000000,B01111111, - B11111110,B00000001,B11111111,B11111111,B00000111,B11111111,B11111111,B11000001,B11111111,B11111111,B11111000,B00000111,B11111111,B11111100,B00000000,B01111111, - B11111100,B00000011,B11111111,B11111111,B11000111,B11111111,B11111111,B11100001,B11111111,B11111111,B11111100,B00011111,B11111111,B11111110,B00000000,B01111111, - B11111100,B00000111,B11111111,B11111111,B11100111,B11111111,B11111111,B11110001,B11111111,B11111111,B11111110,B00011111,B11111111,B11111111,B00000000,B00111111, - B11111000,B00001111,B11111111,B11111111,B11100111,B11111111,B11111111,B11111001,B11111111,B11111111,B11111110,B00111111,B11111111,B11111111,B00000000,B00111111, - B11111000,B00001111,B11111111,B11111111,B11100111,B11111111,B11111111,B11111001,B11111111,B11111111,B11111111,B00111111,B11111111,B11111111,B10000000,B00011111, - B11111000,B00001111,B11111111,B11111111,B11110111,B11111111,B00111111,B11111001,B11111111,B11111111,B11111111,B01111111,B11111011,B11111111,B10000000,B00011111, - B11110000,B00001111,B11111100,B01111111,B11110111,B11111111,B00111111,B11111101,B11111111,B11001111,B11111111,B01111111,B11110001,B11111111,B10000000,B00011111, - B11110000,B00001111,B11111100,B01111111,B11110111,B11111111,B00011111,B11111101,B11111111,B11000111,B11111111,B01111111,B11110001,B11111111,B10000000,B00001111, - B11110000,B00001111,B11111100,B01111111,B11110111,B11111111,B00011111,B11111101,B11111111,B11000111,B11111111,B01111111,B11110001,B11111111,B10000000,B00001111, - B11110000,B00001111,B11111100,B01111111,B11110111,B11111111,B00011111,B11111101,B11111111,B11000111,B11111111,B01111111,B11110001,B11111111,B10000000,B00001111, - B11100000,B00001111,B11111100,B01111111,B11110111,B11111111,B00011111,B11111101,B11111111,B11000111,B11111111,B01111111,B11110001,B11111111,B10000000,B00001111, - B11100000,B00001111,B11111100,B01111111,B11110111,B11111111,B00011111,B11111101,B11111111,B11000111,B11111111,B01111111,B11110001,B11111111,B10000000,B00000111, - B11100000,B00001111,B11111100,B01111111,B11110111,B11111111,B00011111,B11111101,B11111111,B11000111,B11111111,B01111111,B11110001,B11111111,B10000000,B00000111, - B11100000,B00001111,B11111100,B01111111,B11110111,B11111111,B00011111,B11111101,B11111111,B11000111,B11111111,B01111111,B11110001,B11111111,B10000000,B00000111, - B11000000,B00001111,B11111100,B01111111,B11110111,B11111111,B00011111,B11111101,B11111111,B11000111,B11111111,B01111111,B11110001,B11111111,B10000000,B00000111, - B11000000,B00001111,B11111000,B01111111,B11110111,B11111111,B00011111,B11111101,B11111111,B11000111,B11111111,B01111111,B11110001,B11111111,B10000000,B00000111, - B11000000,B00000000,B00000000,B01111111,B11100111,B11111111,B00011111,B11111101,B11111111,B11000111,B11111111,B01111111,B11110000,B00000000,B00000000,B00000111, - B11000000,B00000000,B00000001,B11111111,B11100111,B11111111,B00011111,B11111101,B11111111,B11000111,B11111111,B01111111,B11110000,B00000000,B00000000,B00000011, - B11000000,B00000000,B00001111,B11111111,B11000111,B11111111,B00011111,B11111101,B11111111,B11000111,B11111111,B01111111,B11110000,B00000000,B00000000,B00000011, - B11000000,B00000000,B00001111,B11111111,B10000111,B11111111,B00011111,B11111101,B11111111,B11000111,B11111111,B01111111,B11110000,B00000000,B00000000,B00000011, - B11000000,B00000000,B00001111,B11111111,B00000111,B11111111,B00011111,B11111101,B11111111,B11000111,B11111111,B01111111,B11110000,B00000000,B00000000,B00000011, - B11000000,B00000000,B00001111,B11111111,B00000111,B11111111,B00011111,B11111101,B11111111,B11001111,B11111111,B01111111,B11110000,B00000000,B00000000,B00000011, - B11000000,B00000000,B00001111,B11111111,B10000111,B11111111,B00011111,B11111101,B11111111,B11111111,B11111111,B01111111,B11110000,B00000000,B00000000,B00000011, - B11000000,B00000000,B00000111,B11111111,B11000111,B11111111,B00011111,B11111101,B11111111,B11111111,B11111111,B01111111,B11110000,B00000000,B00000000,B00000011, - B11000000,B00000000,B00000000,B11111111,B11100111,B11111111,B00011111,B11111101,B11111111,B11111111,B11111110,B01111111,B11110000,B00000000,B00000000,B00000011, - B11000000,B00000000,B00000000,B01111111,B11100111,B11111111,B00011111,B11111101,B11111111,B11111111,B11111110,B01111111,B11110000,B00000000,B00000000,B00000011, - B11000000,B00001111,B11111000,B01111111,B11100111,B11111111,B00011111,B11111101,B11111111,B11111111,B11111100,B01111111,B11110000,B00000000,B00000000,B00000011, - B11000000,B00011111,B11111100,B01111111,B11110111,B11111111,B00011111,B11111101,B11111111,B11111111,B11111000,B01111111,B11110001,B11111111,B10000000,B00000011, - B11000000,B00011111,B11111100,B01111111,B11110111,B11111111,B00011111,B11111101,B11111111,B11111111,B11100000,B01111111,B11110001,B11111111,B10000000,B00000011, - B11000000,B00011111,B11111100,B01111111,B11110111,B11111111,B00011111,B11111101,B11111111,B11000000,B00000000,B01111111,B11110001,B11111111,B10000000,B00000011, - B11000000,B00011111,B11111100,B01111111,B11110111,B11111111,B00011111,B11111101,B11111111,B11000000,B00000000,B01111111,B11110001,B11111111,B10000000,B00000011, - B11000000,B00011111,B11111100,B01111111,B11110111,B11111111,B00011111,B11111101,B11111111,B11000000,B00000000,B01111111,B11110001,B11111111,B10000000,B00000011, - B11000000,B00011111,B11111100,B01111111,B11110111,B11111111,B00011111,B11111101,B11111111,B11000000,B00000000,B01111111,B11110001,B11111111,B10000000,B00000011, - B11000000,B00011111,B11111100,B01111111,B11110111,B11111111,B00011111,B11111101,B11111111,B11000000,B00000000,B01111111,B11110001,B11111111,B10000000,B00000011, - B11000000,B00011111,B11111100,B01111111,B11110111,B11111111,B00011111,B11111101,B11111111,B11000000,B00000000,B01111111,B11110001,B11111111,B10000000,B00000111, - B11000000,B00011111,B11111100,B01111111,B11110111,B11111111,B00011111,B11111101,B11111111,B11000000,B00000000,B01111111,B11110001,B11111111,B10000000,B00000111, - B11100000,B00011111,B11111100,B01111111,B11110111,B11111111,B00011111,B11111101,B11111111,B11000000,B00000000,B01111111,B11110001,B11111111,B10000000,B00000111, - B11100000,B00011111,B11111100,B01111111,B11110111,B11111111,B00011111,B11111101,B11111111,B11000000,B00000000,B01111111,B11110001,B11111111,B10000000,B00000111, - B11100000,B00011111,B11111100,B01111111,B11110111,B11111111,B00011111,B11111101,B11111111,B11000000,B00000000,B01111111,B11110001,B11111111,B10000000,B00000111, - B11100000,B00001111,B11111111,B11111111,B11110111,B11111111,B00111111,B11111001,B11111111,B11000000,B00000000,B01111111,B11110001,B11111111,B10000000,B00000111, - B11100000,B00001111,B11111111,B11111111,B11100111,B11111111,B11111111,B11111001,B11111111,B11000000,B00000000,B01111111,B11111111,B11111111,B10000000,B00001111, - B11110000,B00001111,B11111111,B11111111,B11100111,B11111111,B11111111,B11111001,B11111111,B11000000,B00000000,B00111111,B11111111,B11111111,B10000000,B00001111, - B11110000,B00001111,B11111111,B11111111,B11100111,B11111111,B11111111,B11110001,B11111111,B11000000,B00000000,B00111111,B11111111,B11111111,B00000000,B00001111, - B11110000,B00000111,B11111111,B11111111,B11000111,B11111111,B11111111,B11100001,B11111111,B11000000,B00000000,B00011111,B11111111,B11111110,B00000000,B00011111, - B11111000,B00000011,B11111111,B11111111,B10000111,B11111111,B11111111,B11000001,B11111111,B11000000,B00000000,B00001111,B11111111,B11111100,B00000000,B00011111, - B11111000,B00000001,B11111111,B11111111,B00000111,B11111111,B11111111,B10000001,B11111111,B11000000,B00000000,B00000111,B11111111,B11111000,B00000000,B00011111, - B11111000,B00000000,B01111111,B11111100,B00000111,B11111111,B11111100,B00000001,B11111111,B11000000,B00000000,B00000001,B11111111,B11100000,B00000000,B00111111, - B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111, - B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111, - B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111111, - B11111110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B10000000,B00000000,B01111111, - B11111110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00000000,B11000000,B00000000,B11111111, - B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00000000,B11000000,B00000000,B11111111, - B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111100,B01111100,B01111100,B11111100,B00000001,B11111111, - B11111111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B11001100,B11100000,B11101100,B00000001,B11111111, - B11111111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B11000100,B11000000,B11000100,B00000011,B11111111, - B11111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B01100000,B11111100,B11000000,B11000100,B00000011,B11111111, - B11111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B01100100,B11000000,B11000000,B11000100,B00000111,B11111111, - B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111100,B11111100,B01111100,B11000100,B00000111,B11111111, - B11111111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111100,B01111100,B00111100,B10000100,B00001111,B11111111, - B11111111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11111111 -}; diff --git a/config/examples/Anet/E16/_Statusscreen.h b/config/examples/Anet/E16/_Statusscreen.h deleted file mode 100644 index 7a1c4e8696..0000000000 --- a/config/examples/Anet/E16/_Statusscreen.h +++ /dev/null @@ -1,83 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Custom Status Screen bitmap - * - * Place this file in the root with your configuration files - * and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h. - */ - -// -// Status Screen Logo bitmap -// -#define STATUS_LOGO_Y 3 -#define STATUS_LOGO_WIDTH 24 - -/** - * Made with Marlin Bitmap Converter - * http://marlinfw.org/tools/u8glib/converter.html - * - * This bitmap from the file '3dpc_tech_statusscreen.bmp' - */ -const unsigned char status_logo_bmp[] PROGMEM = { - B11111111,B11111111,B11111111, - B11111111,B00000000,B11111111, - B11111100,B00000000,B00111111, - B11110000,B00000000,B00001111, - B11100000,B00000000,B00000111, - B11100000,B00000000,B00000111, - B11000000,B00000000,B00000011, - B10011101,B11001110,B00110001, - B10010101,B10101111,B01101001, - B10010101,B10101101,B01101001, - B10000101,B10101101,B01100001, - B10001101,B10101111,B01100001, - B10010101,B10101100,B01100001, - B10010101,B10101100,B01101001, - B10010101,B10101100,B01101001, - B10011101,B11001100,B00110001, - B10000000,B00000000,B00000001, - B11000000,B00000001,B11111011, - B11100000,B00000000,B00000111, - B11100000,B00000000,B00000111, - B11110000,B00000000,B00001111, - B11111100,B00000000,B00111111, - B11111110,B01101100,B01111111, - B11111111,B11111111,B11111111 -}; - -// -// Use default bitmaps -// -#define STATUS_HOTEND_ANIM -#define STATUS_BED_ANIM -#if HOTENDS < 2 - #define STATUS_LOGO_X 8 - #define STATUS_HEATERS_X 40 - #define STATUS_BED_X 72 -#else - #define STATUS_LOGO_X 0 - #define STATUS_HEATERS_X 32 - #define STATUS_BED_X 80 -#endif diff --git a/config/examples/AnimationExample/_Bootscreen.h b/config/examples/AnimationExample/_Bootscreen.h deleted file mode 100644 index 07d1d7ffd2..0000000000 --- a/config/examples/AnimationExample/_Bootscreen.h +++ /dev/null @@ -1,193 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Animated boot screen example - */ - -#define CUSTOM_BOOTSCREEN_ANIMATED -#define CUSTOM_BOOTSCREEN_FRAME_TIME 100 // (ms) - -#define CUSTOM_BOOTSCREEN_BMPWIDTH 120 - -const unsigned char custom_start_bmp[] PROGMEM = { - B00011111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B01100000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111111, - B01000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111, - B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111111, - B10000011,B11001111,B00000000,B00000000,B00001100,B00110000,B00111111, - B10000111,B11111111,B10000000,B00000000,B00001100,B00110000,B00011111, - B10000110,B01111001,B10000000,B00000000,B00001100,B00000000,B00001111, - B10001100,B00110000,B11000111,B10000011,B10001100,B00110000,B11100111, - B10001100,B00110000,B11001111,B11000111,B11001100,B00110001,B11110011, - B10001100,B00110000,B11011100,B11101100,B11101100,B00110011,B10111001, - B10001100,B00110000,B11011000,B01101100,B01101100,B00110011,B00011001, - B10001100,B00110000,B11010000,B01101100,B00001100,B00110011,B00011001, - B10001100,B00110000,B11011000,B01101100,B00001100,B00110011,B00011001, - B10001100,B00110000,B11011100,B01101100,B00001110,B00111011,B00011001, - B10001100,B00110000,B11001111,B01111100,B00000111,B10011111,B00011001, - B10001100,B00110000,B11000111,B01111100,B00000011,B10001111,B00011001, - B01000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000010, - B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110, - B00011111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111000 -}; - -#if ENABLED(CUSTOM_BOOTSCREEN_ANIMATED) - - const unsigned char custom_start_bmp1[] PROGMEM = { - B00011111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B01100000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111111, - B01000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111, - B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111111, - B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111, - B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00011111, - B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001111, - B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111, - B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011, - B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001, - B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001, - B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001, - B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001, - B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001, - B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001, - B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001, - B01000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000010, - B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110, - B00011111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111000 - }; - - const unsigned char custom_start_bmp2[] PROGMEM = { - B00011111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B01100000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111111, - B01000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111, - B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111111, - B10000011,B11001111,B00000000,B00000000,B00000000,B00000000,B00111111, - B10000111,B11111111,B10000000,B00000000,B00000000,B00000000,B00011111, - B10000110,B01111001,B10000000,B00000000,B00000000,B00000000,B00001111, - B10001100,B00110000,B11000000,B00000000,B00000000,B00000000,B00000111, - B10001100,B00110000,B11000000,B00000000,B00000000,B00000000,B00000011, - B10001100,B00110000,B11000000,B00000000,B00000000,B00000000,B00000001, - B10001100,B00110000,B11000000,B00000000,B00000000,B00000000,B00000001, - B10001100,B00110000,B11000000,B00000000,B00000000,B00000000,B00000001, - B10001100,B00110000,B11000000,B00000000,B00000000,B00000000,B00000001, - B10001100,B00110000,B11000000,B00000000,B00000000,B00000000,B00000001, - B10001100,B00110000,B11000000,B00000000,B00000000,B00000000,B00000001, - B10001100,B00110000,B11000000,B00000000,B00000000,B00000000,B00000001, - B01000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000010, - B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110, - B00011111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111000 - }; - - const unsigned char custom_start_bmp3[] PROGMEM = { - B00011111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B01100000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111111, - B01000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111, - B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111111, - B10000011,B11001111,B00000000,B00000000,B00000000,B00000000,B00111111, - B10000111,B11111111,B10000000,B00000000,B00000000,B00000000,B00011111, - B10000110,B01111001,B10000000,B00000000,B00000000,B00000000,B00001111, - B10001100,B00110000,B11000111,B10000000,B00000000,B00000000,B00000111, - B10001100,B00110000,B11001111,B11000000,B00000000,B00000000,B00000011, - B10001100,B00110000,B11011100,B11100000,B00000000,B00000000,B00000001, - B10001100,B00110000,B11011000,B01100000,B00000000,B00000000,B00000001, - B10001100,B00110000,B11010000,B01100000,B00000000,B00000000,B00000001, - B10001100,B00110000,B11011000,B01100000,B00000000,B00000000,B00000001, - B10001100,B00110000,B11011100,B01100000,B00000000,B00000000,B00000001, - B10001100,B00110000,B11001111,B01110000,B00000000,B00000000,B00000001, - B10001100,B00110000,B11000111,B01110000,B00000000,B00000000,B00000001, - B01000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000010, - B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110, - B00011111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111000 - }; - - const unsigned char custom_start_bmp4[] PROGMEM = { - B00011111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B01100000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111111, - B01000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111, - B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111111, - B10000011,B11001111,B00000000,B00000000,B00000000,B00000000,B00111111, - B10000111,B11111111,B10000000,B00000000,B00000000,B00000000,B00011111, - B10000110,B01111001,B10000000,B00000000,B00000000,B00000000,B00001111, - B10001100,B00110000,B11000111,B10000011,B10000000,B00000000,B00000111, - B10001100,B00110000,B11001111,B11000111,B11000000,B00000000,B00000011, - B10001100,B00110000,B11011100,B11101100,B11100000,B00000000,B00000001, - B10001100,B00110000,B11011000,B01101100,B01100000,B00000000,B00000001, - B10001100,B00110000,B11010000,B01101100,B00000000,B00000000,B00000001, - B10001100,B00110000,B11011000,B01101100,B00000000,B00000000,B00000001, - B10001100,B00110000,B11011100,B01101100,B00000000,B00000000,B00000001, - B10001100,B00110000,B11001111,B01111100,B00000000,B00000000,B00000001, - B10001100,B00110000,B11000111,B01111100,B00000000,B00000000,B00000001, - B01000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000010, - B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110, - B00011111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111000 - }; - - const unsigned char custom_start_bmp5[] PROGMEM = { - B00011111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B01100000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111111, - B01000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111, - B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111111, - B10000011,B11001111,B00000000,B00000000,B00001100,B00000000,B00111111, - B10000111,B11111111,B10000000,B00000000,B00001100,B00000000,B00011111, - B10000110,B01111001,B10000000,B00000000,B00001100,B00000000,B00001111, - B10001100,B00110000,B11000111,B10000011,B10001100,B00000000,B00000111, - B10001100,B00110000,B11001111,B11000111,B11001100,B00000000,B00000011, - B10001100,B00110000,B11011100,B11101100,B11101100,B00000000,B00000001, - B10001100,B00110000,B11011000,B01101100,B01101100,B00000000,B00000001, - B10001100,B00110000,B11010000,B01101100,B00001100,B00000000,B00000001, - B10001100,B00110000,B11011000,B01101100,B00001100,B00000000,B00000001, - B10001100,B00110000,B11011100,B01101100,B00001110,B00000000,B00000001, - B10001100,B00110000,B11001111,B01111100,B00000111,B10000000,B00000001, - B10001100,B00110000,B11000111,B01111100,B00000011,B10000000,B00000001, - B01000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000010, - B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110, - B00011111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111000 - }; - - const unsigned char custom_start_bmp6[] PROGMEM = { - B00011111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B01100000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111111, - B01000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111, - B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111111, - B10000011,B11001111,B00000000,B00000000,B00001100,B00110000,B00111111, - B10000111,B11111111,B10000000,B00000000,B00001100,B00110000,B00011111, - B10000110,B01111001,B10000000,B00000000,B00001100,B00000000,B00001111, - B10001100,B00110000,B11000111,B10000011,B10001100,B00110000,B00000111, - B10001100,B00110000,B11001111,B11000111,B11001100,B00110000,B00000011, - B10001100,B00110000,B11011100,B11101100,B11101100,B00110000,B00000001, - B10001100,B00110000,B11011000,B01101100,B01101100,B00110000,B00000001, - B10001100,B00110000,B11010000,B01101100,B00001100,B00110000,B00000001, - B10001100,B00110000,B11011000,B01101100,B00001100,B00110000,B00000001, - B10001100,B00110000,B11011100,B01101100,B00001110,B00111000,B00000001, - B10001100,B00110000,B11001111,B01111100,B00000111,B10011100,B00000001, - B10001100,B00110000,B11000111,B01111100,B00000011,B10001100,B00000001, - B01000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000010, - B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110, - B00011111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111000 - }; - - const unsigned char * const custom_bootscreen_animation[] PROGMEM = { - custom_start_bmp1, custom_start_bmp2, custom_start_bmp3, custom_start_bmp4, custom_start_bmp5, custom_start_bmp6, custom_start_bmp - }; - -#endif diff --git a/config/examples/AnyCubic/i3/Configuration.h b/config/examples/AnyCubic/i3/Configuration.h deleted file mode 100644 index ed84b0fa2f..0000000000 --- a/config/examples/AnyCubic/i3/Configuration.h +++ /dev/null @@ -1,2236 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_TRIGORILLA_14 -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Anycubic i3" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // ANYCUBIC I3 240C and 8 cycles - #define DEFAULT_Kp 17.80 - #define DEFAULT_Ki 0.84 - #define DEFAULT_Kd 64.84 - - // Ultimaker - //#define DEFAULT_Kp 22.2 - //#define DEFAULT_Ki 1.08 - //#define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - //#define DEFAULT_bedKp 10.00 - //#define DEFAULT_bedKi .023 - //#define DEFAULT_bedKd 305.4 - - // Anycubic I3 with Ultrabase. 100C and 8 cycles - #define DEFAULT_bedKp 218.59 - #define DEFAULT_bedKi 43.04 - #define DEFAULT_bedKd 277.56 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 420 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 96.2 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 500, 500, 6, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 1500, 1500, 50, 8000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 5.0 - #define DEFAULT_YJERK 2.0 - #define DEFAULT_ZJERK 0.4 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 2.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.002 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 75, 5, -2 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR false -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 210 -#define Y_BED_SIZE 210 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS -10 -#define Y_MIN_POS -11 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 250 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - //#define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 200 -#define PREHEAT_1_TEMP_BED 65 -#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 95 -#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 WESTERN - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -#define NUM_SERVOS 1 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/AnyCubic/i3/Configuration_adv.h b/config/examples/AnyCubic/i3/Configuration_adv.h deleted file mode 100644 index f6b397f93f..0000000000 --- a/config/examples/AnyCubic/i3/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - #define CONTROLLER_FAN_PIN 7 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN TRIGORILLA_FAN2_PIN -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -//#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/ArmEd/Configuration.h b/config/examples/ArmEd/Configuration.h deleted file mode 100644 index eaacff7489..0000000000 --- a/config/examples/ArmEd/Configuration.h +++ /dev/null @@ -1,2227 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT -1 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -// #define SERIAL_PORT_2 3 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_ARMED -#endif - -// Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 5 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 13 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Armed - #define DEFAULT_Kp 23.41 - #define DEFAULT_Ki 2.57 - #define DEFAULT_Kd 53.37 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 144.87 - #define DEFAULT_bedKi 27.00 - #define DEFAULT_bedKd 194.30 - - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 400, 156.84 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 20, 120 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 1000, 1000, 1000, 5000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 8.0 - #define DEFAULT_YJERK 8.0 - #define DEFAULT_ZJERK 0.4 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 1.5 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.026 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -//#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/ArmEd/Configuration_adv.h b/config/examples/ArmEd/Configuration_adv.h deleted file mode 100644 index 7122c40ca8..0000000000 --- a/config/examples/ArmEd/Configuration_adv.h +++ /dev/null @@ -1,2935 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -#define HEATER_BED_INVERTING true -#define HEATER_0_INVERTING true -#define HEATER_1_INVERTING true - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -//#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Artillery/Genius/Configuration.h b/config/examples/Artillery/Genius/Configuration.h deleted file mode 100644 index a96559bf52..0000000000 --- a/config/examples/Artillery/Genius/Configuration.h +++ /dev/null @@ -1,2209 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(thisiskeithb, Genius)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_MKS_GEN_L -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Genius" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 5 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Genius - #define DEFAULT_Kp 9.31 - #define DEFAULT_Ki 0.57 - #define DEFAULT_Kd 37.76 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - // Genius - #define DEFAULT_bedKp 92.46 - #define DEFAULT_bedKi 16.12 - #define DEFAULT_bedKd 132.55 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -#define X_DRIVER_TYPE TMC2100 -#define Y_DRIVER_TYPE TMC2100 -#define Z_DRIVER_TYPE TMC2100 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -#define Z2_DRIVER_TYPE TMC2100 -//#define Z3_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE TMC2100 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80.121, 80.121, 399.778, 445 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 50, 40 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 2000, 2000, 100, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 800 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 10000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 2000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 8.0 - #define DEFAULT_YJERK 8.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.032 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR false -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 220 -#define Y_BED_SIZE 230 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS -2 -#define Y_MIN_POS -5 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 250 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (80*60) -#define HOMING_FEEDRATE_Z (20*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -//#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - #define RGB_LED_R_PIN 5 - #define RGB_LED_G_PIN 4 - #define RGB_LED_B_PIN 6 - #define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Artillery/Genius/Configuration_adv.h b/config/examples/Artillery/Genius/Configuration_adv.h deleted file mode 100755 index 06c7aa0990..0000000000 --- a/config/examples/Artillery/Genius/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN 7 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - #define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_24V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Artillery/Genius/_Bootscreen.h b/config/examples/Artillery/Genius/_Bootscreen.h deleted file mode 100755 index e29d4c77b8..0000000000 --- a/config/examples/Artillery/Genius/_Bootscreen.h +++ /dev/null @@ -1,93 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Made with Marlin Bitmap Converter - * http://marlinfw.org/tools/u8glib/converter.html - * - * This bitmap from the file 'EVNOVO-Artillery-Logo.jpg' - */ -#define CUSTOM_BOOTSCREEN_BMPWIDTH 54 - -const unsigned char custom_start_bmp[] PROGMEM = { - B00000000,B00000000,B01100000,B00000000,B00011000,B00000000,B00000000, - B00000000,B00000001,B11100000,B00000000,B00011110,B00000000,B00000000, - B00000000,B00000111,B11100000,B00000000,B00011111,B10000000,B00000000, - B00000000,B00001111,B11100000,B00000000,B00011111,B11100000,B00000000, - B00000000,B00111111,B11100000,B00000000,B00011111,B11110000,B00000000, - B00000000,B11111111,B11000000,B00000000,B00001111,B11111100,B00000000, - B00000011,B11111111,B00000000,B00000000,B00000011,B11111111,B00000000, - B00000111,B11111100,B00000000,B00000000,B00000000,B11111111,B10000000, - B00011111,B11111000,B00000000,B00000000,B00000000,B01111111,B11100000, - B01111111,B11100000,B00000000,B00000000,B00000000,B00011111,B11111000, - B11111111,B10000000,B00000000,B00000000,B00000000,B00000111,B11111100, - B11111110,B00000000,B00000000,B00000000,B00000000,B00000001,B11111100, - B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B11111100, - B11111000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111100, - B11111000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111100, - B11111000,B00000011,B00000000,B00000000,B00000011,B00000000,B01111100, - B11111000,B00000011,B11000000,B00000000,B00001111,B00000000,B01111100, - B11111000,B00000011,B11110000,B00000000,B00111111,B00000000,B01111100, - B11111000,B00000011,B11111100,B00000000,B11111111,B00000000,B01111100, - B11111000,B00000011,B11111110,B00000001,B11111111,B00000000,B01111100, - B11111000,B00000001,B11111111,B00000011,B11111110,B00000000,B01111100, - B11111000,B00000000,B11111111,B00000011,B11111100,B00000000,B01111100, - B11111000,B00000000,B00111111,B00000011,B11110000,B00000000,B01111100, - B11111000,B00000000,B00011111,B00000011,B11100000,B00000000,B01111100, - B11111000,B00000000,B00011111,B00000011,B11100000,B00000000,B01111100, - B11111000,B00000000,B00011111,B00000011,B11100000,B00000000,B01111100, - B11111000,B00000000,B00011111,B00000011,B11100000,B00000000,B01111100, - B11111000,B00000000,B00011111,B00000011,B11100000,B00000000,B01111100, - B11111000,B00000000,B00011111,B00000011,B11100000,B00000000,B01111100, - B11111000,B00000000,B00011111,B00000011,B11100000,B00000000,B01111100, - B11111000,B00000000,B00011111,B00000011,B11100000,B00000000,B01111100, - B11111000,B00000000,B00011111,B00000011,B11100000,B00000000,B01111100, - B11111000,B00000000,B00011111,B00000011,B11100000,B00000000,B01111100, - B11111000,B00000000,B00011111,B00000011,B11100000,B00000000,B01111100, - B11111000,B00000000,B00011111,B00000011,B11100000,B00000000,B01111100, - B11111000,B00000000,B00011111,B00000011,B11100000,B00000000,B01111100, - B11111000,B00000000,B00011111,B00000011,B11100000,B00000000,B01111100, - B11111000,B00000000,B00111111,B00000011,B11110000,B00000000,B01111100, - B11111000,B00000000,B11111111,B00000011,B11111100,B00000000,B01111100, - B11111000,B00000001,B11111111,B00000011,B11111110,B00000000,B01111100, - B11111000,B00000011,B11111110,B00000001,B11111111,B00000000,B01111100, - B11111000,B00000011,B11111100,B00000000,B11111111,B00000000,B01111100, - B11111000,B00000011,B11110000,B00000000,B00111111,B00000000,B01111100, - B11111000,B00000011,B11000000,B00000000,B00001111,B00000000,B01111100, - B11111000,B00000011,B00000000,B00000000,B00000011,B00000000,B01111100, - B11111000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111100, - B11111000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111100, - B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B11111100, - B11111110,B00000000,B00000000,B00000000,B00000000,B00000001,B11111100, - B11111111,B10000000,B00000000,B00000000,B00000000,B00000111,B11111100, - B01111111,B11100000,B00000000,B00000000,B00000000,B00011111,B11111000, - B00011111,B11111000,B00000000,B00000000,B00000000,B01111111,B11100000, - B00000111,B11111100,B00000000,B00000000,B00000000,B11111111,B10000000, - B00000011,B11111111,B00000000,B00000000,B00000011,B11111111,B00000000, - B00000000,B11111111,B11000000,B00000000,B00001111,B11111100,B00000000, - B00000000,B00111111,B11100000,B00000000,B00011111,B11110000,B00000000, - B00000000,B00011111,B11100000,B00000000,B00011111,B11000000,B00000000, - B00000000,B00000111,B11100000,B00000000,B00011111,B10000000,B00000000, - B00000000,B00000001,B11100000,B00000000,B00011110,B00000000,B00000000, - B00000000,B00000000,B01100000,B00000000,B00011000,B00000000,B00000000 -}; diff --git a/config/examples/Artillery/Sidewinder X1/Configuration.h b/config/examples/Artillery/Sidewinder X1/Configuration.h deleted file mode 100644 index 736ba87c26..0000000000 --- a/config/examples/Artillery/Sidewinder X1/Configuration.h +++ /dev/null @@ -1,2231 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(thisiskeithb, Sidewinder X1)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_MKS_GEN_L -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Sidewinder X1" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Sidewinder X1 - #define DEFAULT_Kp 14.58 - #define DEFAULT_Ki 1.14 - #define DEFAULT_Kd 46.57 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - // Sidewinder X1 - #define DEFAULT_bedKp 244.21 - #define DEFAULT_bedKi 45.87 - #define DEFAULT_bedKd 325.08 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - //#define DEFAULT_bedKp 10.00 - //#define DEFAULT_bedKi .023 - //#define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -#define X_DRIVER_TYPE TMC2100 -#define Y_DRIVER_TYPE TMC2100 -#define Z_DRIVER_TYPE TMC2100 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -#define Z2_DRIVER_TYPE TMC2100 -//#define Z3_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE TMC2100 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80.121, 80.121, 399.778, 445 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 50, 40 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 2000, 2000, 100, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 800 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 10000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 2000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 8.0 - #define DEFAULT_YJERK 8.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.032 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR false -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 300 -#define Y_BED_SIZE 310 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS -2 -#define Y_MIN_POS -5 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 400 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (80*60) -#define HOMING_FEEDRATE_Z (20*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -//#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - #define RGB_LED_R_PIN 5 - #define RGB_LED_G_PIN 4 - #define RGB_LED_B_PIN 6 - #define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Artillery/Sidewinder X1/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1/Configuration_adv.h deleted file mode 100755 index 06c7aa0990..0000000000 --- a/config/examples/Artillery/Sidewinder X1/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN 7 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - #define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_24V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Artillery/Sidewinder X1/_Bootscreen.h b/config/examples/Artillery/Sidewinder X1/_Bootscreen.h deleted file mode 100755 index e29d4c77b8..0000000000 --- a/config/examples/Artillery/Sidewinder X1/_Bootscreen.h +++ /dev/null @@ -1,93 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Made with Marlin Bitmap Converter - * http://marlinfw.org/tools/u8glib/converter.html - * - * This bitmap from the file 'EVNOVO-Artillery-Logo.jpg' - */ -#define CUSTOM_BOOTSCREEN_BMPWIDTH 54 - -const unsigned char custom_start_bmp[] PROGMEM = { - B00000000,B00000000,B01100000,B00000000,B00011000,B00000000,B00000000, - B00000000,B00000001,B11100000,B00000000,B00011110,B00000000,B00000000, - B00000000,B00000111,B11100000,B00000000,B00011111,B10000000,B00000000, - B00000000,B00001111,B11100000,B00000000,B00011111,B11100000,B00000000, - B00000000,B00111111,B11100000,B00000000,B00011111,B11110000,B00000000, - B00000000,B11111111,B11000000,B00000000,B00001111,B11111100,B00000000, - B00000011,B11111111,B00000000,B00000000,B00000011,B11111111,B00000000, - B00000111,B11111100,B00000000,B00000000,B00000000,B11111111,B10000000, - B00011111,B11111000,B00000000,B00000000,B00000000,B01111111,B11100000, - B01111111,B11100000,B00000000,B00000000,B00000000,B00011111,B11111000, - B11111111,B10000000,B00000000,B00000000,B00000000,B00000111,B11111100, - B11111110,B00000000,B00000000,B00000000,B00000000,B00000001,B11111100, - B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B11111100, - B11111000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111100, - B11111000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111100, - B11111000,B00000011,B00000000,B00000000,B00000011,B00000000,B01111100, - B11111000,B00000011,B11000000,B00000000,B00001111,B00000000,B01111100, - B11111000,B00000011,B11110000,B00000000,B00111111,B00000000,B01111100, - B11111000,B00000011,B11111100,B00000000,B11111111,B00000000,B01111100, - B11111000,B00000011,B11111110,B00000001,B11111111,B00000000,B01111100, - B11111000,B00000001,B11111111,B00000011,B11111110,B00000000,B01111100, - B11111000,B00000000,B11111111,B00000011,B11111100,B00000000,B01111100, - B11111000,B00000000,B00111111,B00000011,B11110000,B00000000,B01111100, - B11111000,B00000000,B00011111,B00000011,B11100000,B00000000,B01111100, - B11111000,B00000000,B00011111,B00000011,B11100000,B00000000,B01111100, - B11111000,B00000000,B00011111,B00000011,B11100000,B00000000,B01111100, - B11111000,B00000000,B00011111,B00000011,B11100000,B00000000,B01111100, - B11111000,B00000000,B00011111,B00000011,B11100000,B00000000,B01111100, - B11111000,B00000000,B00011111,B00000011,B11100000,B00000000,B01111100, - B11111000,B00000000,B00011111,B00000011,B11100000,B00000000,B01111100, - B11111000,B00000000,B00011111,B00000011,B11100000,B00000000,B01111100, - B11111000,B00000000,B00011111,B00000011,B11100000,B00000000,B01111100, - B11111000,B00000000,B00011111,B00000011,B11100000,B00000000,B01111100, - B11111000,B00000000,B00011111,B00000011,B11100000,B00000000,B01111100, - B11111000,B00000000,B00011111,B00000011,B11100000,B00000000,B01111100, - B11111000,B00000000,B00011111,B00000011,B11100000,B00000000,B01111100, - B11111000,B00000000,B00011111,B00000011,B11100000,B00000000,B01111100, - B11111000,B00000000,B00111111,B00000011,B11110000,B00000000,B01111100, - B11111000,B00000000,B11111111,B00000011,B11111100,B00000000,B01111100, - B11111000,B00000001,B11111111,B00000011,B11111110,B00000000,B01111100, - B11111000,B00000011,B11111110,B00000001,B11111111,B00000000,B01111100, - B11111000,B00000011,B11111100,B00000000,B11111111,B00000000,B01111100, - B11111000,B00000011,B11110000,B00000000,B00111111,B00000000,B01111100, - B11111000,B00000011,B11000000,B00000000,B00001111,B00000000,B01111100, - B11111000,B00000011,B00000000,B00000000,B00000011,B00000000,B01111100, - B11111000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111100, - B11111000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111100, - B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B11111100, - B11111110,B00000000,B00000000,B00000000,B00000000,B00000001,B11111100, - B11111111,B10000000,B00000000,B00000000,B00000000,B00000111,B11111100, - B01111111,B11100000,B00000000,B00000000,B00000000,B00011111,B11111000, - B00011111,B11111000,B00000000,B00000000,B00000000,B01111111,B11100000, - B00000111,B11111100,B00000000,B00000000,B00000000,B11111111,B10000000, - B00000011,B11111111,B00000000,B00000000,B00000011,B11111111,B00000000, - B00000000,B11111111,B11000000,B00000000,B00001111,B11111100,B00000000, - B00000000,B00111111,B11100000,B00000000,B00011111,B11110000,B00000000, - B00000000,B00011111,B11100000,B00000000,B00011111,B11000000,B00000000, - B00000000,B00000111,B11100000,B00000000,B00011111,B10000000,B00000000, - B00000000,B00000001,B11100000,B00000000,B00011110,B00000000,B00000000, - B00000000,B00000000,B01100000,B00000000,B00011000,B00000000,B00000000 -}; diff --git a/config/examples/Azteeg/X5GT/Configuration.h b/config/examples/Azteeg/X5GT/Configuration.h deleted file mode 100644 index 0f4bf6803d..0000000000 --- a/config/examples/Azteeg/X5GT/Configuration.h +++ /dev/null @@ -1,2226 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 115200 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_AZTEEG_X5_GT -#endif - -// Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 2 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 1 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - #define DEFAULT_Kp 22.2 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -#define USE_XMAX_PLUG -#define USE_YMAX_PLUG -#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 500 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 CYRILLIC - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration.h b/config/examples/BIBO/TouchX/cyclops/Configuration.h deleted file mode 100644 index 2928dd0c09..0000000000 --- a/config/examples/BIBO/TouchX/cyclops/Configuration.h +++ /dev/null @@ -1,2226 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_MKS_GEN_L -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "BIBO2 Touch X" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 2 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -#define HOTEND_OFFSET_X { 0.0, -33.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 5 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 5 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 285 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 115 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - #define DEFAULT_Kp 23.89 - #define DEFAULT_Ki 1.37 - #define DEFAULT_Kd 104.5 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 23.89 - #define DEFAULT_bedKi 1.37 - #define DEFAULT_bedKd 104.5 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -//#define PREVENT_COLD_EXTRUSION -//#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 400, 400} - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 350, 350, 10, 50 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 1100, 1100, 300, 2500 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 1100 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 1100 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 1100 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 7.0 - #define DEFAULT_YJERK 7.0 - #define DEFAULT_ZJERK 0.65 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.018 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 9000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 10 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -//#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR false -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR true -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -#define Z_HOMING_HEIGHT 8 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 220 -#define Y_BED_SIZE 186 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS -13 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS 250 -#define Y_MAX_POS 186 -#define Z_MAX_POS 186 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - #define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (25*60) -#define HOMING_FEEDRATE_Z (6*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 190 -#define PREHEAT_1_TEMP_BED 65 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 100 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h deleted file mode 100644 index e75c7d417e..0000000000 --- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 45 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 2 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 60 // Seconds - #define WATCH_TEMP_INCREASE 1 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 3 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 1 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -//#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/BIBO/TouchX/default/Configuration.h b/config/examples/BIBO/TouchX/default/Configuration.h deleted file mode 100644 index 1fbf1f14b7..0000000000 --- a/config/examples/BIBO/TouchX/default/Configuration.h +++ /dev/null @@ -1,2226 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_MKS_GEN_L -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "BIBO2 Touch X" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 2 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -#define HOTEND_OFFSET_X { 0.0, -33.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 5 -#define TEMP_SENSOR_1 5 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 60 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 115 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - #define DEFAULT_Kp 23.89 - #define DEFAULT_Ki 1.37 - #define DEFAULT_Kd 104.5 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 23.89 - #define DEFAULT_bedKi 1.37 - #define DEFAULT_bedKd 104.5 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -//#define USE_XMIN_PLUG -//#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -#define USE_XMAX_PLUG -#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 400, 93.6 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 350, 350, 10, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 1100, 1100, 300, 5000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 1100 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 1100 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 1100 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 7.0 - #define DEFAULT_YJERK 7.0 - #define DEFAULT_ZJERK 0.65 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.018 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 10 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 10 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -//#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR true -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -#define Z_HOMING_HEIGHT 10 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR 1 -#define Y_HOME_DIR 1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 214 -#define Y_BED_SIZE 186 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS -107 -#define Y_MIN_POS -93 -#define Z_MIN_POS 0 -#define X_MAX_POS 141 -#define Y_MAX_POS 93 -#define Z_MAX_POS 186 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - #define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (15*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 60 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 80 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/BIBO/TouchX/default/Configuration_adv.h b/config/examples/BIBO/TouchX/default/Configuration_adv.h deleted file mode 100644 index dfaac32a06..0000000000 --- a/config/examples/BIBO/TouchX/default/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 2 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 45 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -//#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/BQ/Hephestos/Configuration.h b/config/examples/BQ/Hephestos/Configuration.h deleted file mode 100644 index c3de2a0bef..0000000000 --- a/config/examples/BQ/Hephestos/Configuration.h +++ /dev/null @@ -1,2214 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 115200 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "HEPHESTOS" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 0 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 260 -#define HEATER_1_MAXTEMP 260 -#define HEATER_2_MAXTEMP 260 -#define HEATER_3_MAXTEMP 260 -#define HEATER_4_MAXTEMP 260 -#define HEATER_5_MAXTEMP 260 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // Hephestos i3 - #define DEFAULT_Kp 23.05 - #define DEFAULT_Ki 2.00 - #define DEFAULT_Kd 66.47 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 100.47095761381482 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 200, 200, 3.3, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 1100, 1100, 100, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 650 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.062 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR false -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 215 -#define Y_BED_SIZE 210 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 180 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY 2000 -#define HOMING_FEEDRATE_Z 150 - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 200 -#define PREHEAT_1_TEMP_BED 0 -#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 220 -#define PREHEAT_2_TEMP_BED 100 -#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/BQ/Hephestos/Configuration_adv.h b/config/examples/BQ/Hephestos/Configuration_adv.h deleted file mode 100644 index f27deb38c8..0000000000 --- a/config/examples/BQ/Hephestos/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 60 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 120*60, 120*60, 18*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -//#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - //#define USER_DESC_5 "Home & Info" - //#define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/BQ/Hephestos_2/Configuration.h b/config/examples/BQ/Hephestos_2/Configuration.h deleted file mode 100644 index 6e8a356809..0000000000 --- a/config/examples/BQ/Hephestos_2/Configuration.h +++ /dev/null @@ -1,2227 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * BQ Hephestos 2 Configuration - * - * This configuration supports the standard Hephestos 2 with or without the - * heated bed kit featured at https://store.bq.com/en/heated-bed-kit-hephestos2 - * - * Enable HEPHESTOS2_HEATED_BED_KIT in Configuration_adv.h for all functionality - * related to the heated bed. - * - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "@jbrazio" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 115200 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_BQ_ZUM_MEGA_3D -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "BQ Hephestos 2" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -#define MACHINE_UUID "8d083632-40c5-4649-85b8-43d9ae6c5d55" // BQ Hephestos 2 standard config - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 70 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 0 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 230 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 100 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // Tuned PID values using M303 - #define DEFAULT_Kp 23.75 - #define DEFAULT_Ki 2.12 - #define DEFAULT_Kd 66.63 - - // BQ firmware stock PID values - //#define DEFAULT_Kp 10.7 - //#define DEFAULT_Ki 0.45 - //#define DEFAULT_Kd 3 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 160, 160, 8000, 218.77 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 3, 120 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 3000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 900 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 1300 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 1500 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 5.0 - #define DEFAULT_YJERK 5.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 10.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.011 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 34, 15, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 0 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 2 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR true -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 3 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 210 -#define Y_BED_SIZE 297 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 210 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 185 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 50 // (°C) Defaultbed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 5 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - #define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -#define Z_PROBE_END_SCRIPT "G27 P0" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 5 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 50 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 210 -#define PREHEAT_2_TEMP_BED 60 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 10 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -#define ENCODER_PULSES_PER_STEP 1 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -#define ENCODER_STEPS_PER_MENU_ITEM 5 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/BQ/Hephestos_2/Configuration_adv.h b/config/examples/BQ/Hephestos_2/Configuration_adv.h deleted file mode 100644 index 65a3ccf5f6..0000000000 --- a/config/examples/BQ/Hephestos_2/Configuration_adv.h +++ /dev/null @@ -1,2939 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -#define FAN_KICKSTART_TIME 800 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -//#define E0_AUTO_FAN_PIN -1 -//#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 1 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 300 -#define DISABLE_INACTIVE_X false -#define DISABLE_INACTIVE_Y false -#define DISABLE_INACTIVE_Z false // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps - -#define DIGIPOT_MOTOR_CURRENT { 170, 170, 180, 190, 180 } // Values 0-255 - // - // bq ZUM Mega 3D defaults: - // X = 150 [~1.17A] - // Y = 170 [~1.33A] - // Z = 180 [~1.41A] - // E0 = 190 [~1.49A] - -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - //#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 50 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -#define LCD_TIMEOUT_TO_STATUS 60000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE false // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "G27 P0" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G27" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - //#define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 2 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 2 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1500 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 64 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 32 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 0.25 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - //#define USER_DESC_5 "Home & Info" - //#define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/BQ/Hephestos_2/README.md b/config/examples/BQ/Hephestos_2/README.md deleted file mode 100644 index ab28487e2d..0000000000 --- a/config/examples/BQ/Hephestos_2/README.md +++ /dev/null @@ -1,29 +0,0 @@ -# Example Configuration for BQ [Hephestos 2](http://www.bq.com/uk/hephestos-2) -Based on the original configuration file shipped with the heavily modified Marlin fork by BQ. -The forked firmware and configuration files can be found at the [BQ Github repository](https://github.com/bq/Marlin). - -NOTE: The look and feel of the LCD menu will change dramatically when using the original Marlin firmware. - -## Changelog - * 2018/05/30 - Configuration updated to the latest Marlin version (43a55a9af). - ABL Bilinear 5x5 is active by default. - - * 2017/07/06 - Configuration updated to the latest Marlin version and added support for the - official BQ heated bed upgrade kit. - - * 2016/12/13 - Configuration updated to the latest Marlin version. - - * 2016/07/13 - Configuration updated to the latest Marlin version. - - * 2016/06/21 - Disabled heated bed related options, activated software endstops and SD printing now - disables the heater when finishes printing. - - * 2016/03/21 - Activated 4-point auto leveling by default and updated miscellaneous z-probe values. - - * 2016/03/01 - The first release of Marlin's configuration file for the - BQ Hephestos 2 3D printer. - - -## Support -This configuration should work easily with the stock Hephestos 2, nevertheless if you encounter any -issues you may contact me on [Github](https://github.com/jbrazio), [Twitter](https://twitter.com/jbrazio) or by mail. diff --git a/config/examples/BQ/Hephestos_2/_Bootscreen.h b/config/examples/BQ/Hephestos_2/_Bootscreen.h deleted file mode 100644 index 8d593ccdea..0000000000 --- a/config/examples/BQ/Hephestos_2/_Bootscreen.h +++ /dev/null @@ -1,101 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Custom Boot Screen bitmap - * - * Place this file in the root with your configuration files - * and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h. - * - * Use the Marlin Bitmap Converter to make your own: - * http://marlinfw.org/tools/u8glib/converter.html - */ - -#define CUSTOM_BOOTSCREEN_BMPWIDTH 64 - -const unsigned char custom_start_bmp[] PROGMEM = { - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000011,B11110000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000111,B11111000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000111,B11111000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00001111,B11111100,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00001111,B11111100,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000111,B11111000,B00000000,B00000000,B00000000, - B00000000,B00000000,B11111000,B00000111,B11111000,B00000111,B11000000,B00000000, - B00000000,B00000001,B11111100,B00000011,B11110000,B00001111,B11100000,B00000000, - B00000000,B00000011,B11111110,B00000000,B11000000,B00011111,B11110000,B00000000, - B00000000,B00000011,B11111110,B00000000,B00000000,B00011111,B11110000,B00000000, - B00000000,B00000011,B11111110,B00000000,B00000000,B00011111,B11110000,B00000000, - B00000000,B00000011,B11111110,B00000000,B00000000,B00011111,B11110000,B00000000, - B00000000,B00000011,B11111100,B00000000,B00000000,B00001111,B11100000,B00000000, - B00000000,B00000001,B11111000,B00000000,B00000000,B00001111,B11100000,B00000000, - B00000000,B00000000,B01110000,B00000000,B00000000,B00000011,B10000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11111100, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11111100, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111100, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111100, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11111100, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11111100, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00001111,B10000000,B00000000,B00000000,B01110000,B00000000,B00000000,B00000000, - B00011111,B11000000,B00000000,B00000000,B01111000,B00000000,B00000000,B00000000, - B00111111,B11000000,B00000000,B00000000,B01111000,B00000000,B00000000,B00000000, - B00111111,B11100000,B00000000,B00000000,B01111000,B00000000,B00000000,B00000000, - B00111111,B11100000,B00000000,B00000000,B01111000,B00000000,B00000000,B00000000, - B00111111,B11100000,B00000000,B00000000,B01111011,B11000000,B00001111,B00000000, - B00111111,B11000000,B00000000,B00000000,B01111111,B11110000,B00111111,B11000000, - B00011111,B10000000,B00000000,B00000000,B01111111,B11111000,B01111111,B11100000, - B00001111,B00000000,B00000000,B00000000,B01111110,B11111100,B11111001,B11110000, - B00000000,B00000000,B00000000,B00000000,B01111000,B00111100,B11100000,B11110000, - B00000000,B00000000,B00000000,B00000000,B01111000,B00011101,B11100000,B01110000, - B00000000,B00000000,B00000000,B00000000,B01111000,B00011101,B11100000,B01110000, - B00000000,B00000000,B00000000,B00000000,B01111000,B00011101,B11100000,B01110000, - B00000000,B00000000,B00000000,B00000000,B01111000,B00011101,B11100000,B01110000, - B00000000,B00000000,B00000000,B00000000,B01111000,B00011101,B11100000,B01110000, - B00000000,B00000000,B00000000,B00000000,B01111000,B00111100,B11100000,B11110000, - B00000000,B00000000,B00000000,B00000000,B01111100,B01111100,B11111001,B11110000, - B00000000,B00000000,B00000000,B00000000,B00011111,B11111000,B11111111,B11110000, - B00000000,B00000000,B00000000,B00000000,B00001111,B11110000,B01111111,B11110000, - B00000000,B00000000,B00000000,B00000000,B00000111,B11100000,B00011111,B01110000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01110000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01110000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01110000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01110000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01110000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000 -}; diff --git a/config/examples/BQ/WITBOX/Configuration.h b/config/examples/BQ/WITBOX/Configuration.h deleted file mode 100644 index af2c579627..0000000000 --- a/config/examples/BQ/WITBOX/Configuration.h +++ /dev/null @@ -1,2214 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(bq Witbox)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 115200 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "WITBOX" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 0 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 260 -#define HEATER_1_MAXTEMP 260 -#define HEATER_2_MAXTEMP 260 -#define HEATER_3_MAXTEMP 260 -#define HEATER_4_MAXTEMP 260 -#define HEATER_5_MAXTEMP 260 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // Witbox - #define DEFAULT_Kp 22.2 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -//#define USE_XMIN_PLUG -//#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -#define USE_XMAX_PLUG -#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 600.0*8/3, 102.073 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 350, 350, 7.2, 80 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 1000, 1000, 10, 1000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z true - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR false -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR 1 -#define Y_HOME_DIR 1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 297 -#define Y_BED_SIZE 210 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (120*60) -#define HOMING_FEEDRATE_Z 432 - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 200 -#define PREHEAT_1_TEMP_BED 0 -#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 220 -#define PREHEAT_2_TEMP_BED 100 -#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/BQ/WITBOX/Configuration_adv.h b/config/examples/BQ/WITBOX/Configuration_adv.h deleted file mode 100644 index f27deb38c8..0000000000 --- a/config/examples/BQ/WITBOX/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 60 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 120*60, 120*60, 18*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -//#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - //#define USER_DESC_5 "Home & Info" - //#define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/BigTreeTech/SKR Mini E3 1.0/Configuration.h b/config/examples/BigTreeTech/SKR Mini E3 1.0/Configuration.h deleted file mode 100644 index a1f2a07a6d..0000000000 --- a/config/examples/BigTreeTech/SKR Mini E3 1.0/Configuration.h +++ /dev/null @@ -1,2218 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(thisiskeithb, Ender-3)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 2 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 115200 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_BTT_SKR_MINI_E3_V1_0 -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Ender-3" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 125 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - // Creality Ender-3 - #define DEFAULT_Kp 21.73 - #define DEFAULT_Ki 1.54 - #define DEFAULT_Kd 76.55 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - //#define DEFAULT_bedKp 10.00 - //#define DEFAULT_bedKi .023 - //#define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. - #define DEFAULT_bedKp 50.71 - #define DEFAULT_bedKi 9.88 - #define DEFAULT_bedKd 173.43 -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 600 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -#define X_DRIVER_TYPE TMC2209 -#define Y_DRIVER_TYPE TMC2209 -#define Z_DRIVER_TYPE TMC2209 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE TMC2209 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -//#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 235 -#define Y_BED_SIZE 235 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 250 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 5 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - #define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - #define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (20*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 185 -#define PREHEAT_1_TEMP_BED 45 -#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 WESTERN - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/BigTreeTech/SKR Mini E3 1.0/Configuration_adv.h b/config/examples/BigTreeTech/SKR Mini E3 1.0/Configuration_adv.h deleted file mode 100644 index e81b1a7c71..0000000000 --- a/config/examples/BigTreeTech/SKR Mini E3 1.0/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - #define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - #define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - #define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES true // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - #define SDCARD_CONNECTION ONBOARD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 32 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 32 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 32 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 32 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 400 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 350 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 580 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 580 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 650 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 2 - #define Z_SLAVE_ADDRESS 1 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 3 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_24V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - #define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - #define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/BigTreeTech/SKR Mini E3 1.2/Configuration.h b/config/examples/BigTreeTech/SKR Mini E3 1.2/Configuration.h deleted file mode 100644 index ecbbee0c96..0000000000 --- a/config/examples/BigTreeTech/SKR Mini E3 1.2/Configuration.h +++ /dev/null @@ -1,2219 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(thisiskeithb, Ender-3)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 2 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 115200 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_BTT_SKR_MINI_E3_V1_2 -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Ender-3" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 125 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - // Creality Ender-3 - #define DEFAULT_Kp 21.73 - #define DEFAULT_Ki 1.54 - #define DEFAULT_Kd 76.55 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - //#define DEFAULT_bedKp 10.00 - //#define DEFAULT_bedKi .023 - //#define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. - #define DEFAULT_bedKp 50.71 - #define DEFAULT_bedKi 9.88 - #define DEFAULT_bedKd 173.43 - -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 600 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -#define X_DRIVER_TYPE TMC2209 -#define Y_DRIVER_TYPE TMC2209 -#define Z_DRIVER_TYPE TMC2209 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE TMC2209 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -//#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 235 -#define Y_BED_SIZE 235 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 250 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 5 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - #define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - #define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (20*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 185 -#define PREHEAT_1_TEMP_BED 45 -#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 WESTERN - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/BigTreeTech/SKR Mini E3 1.2/Configuration_adv.h b/config/examples/BigTreeTech/SKR Mini E3 1.2/Configuration_adv.h deleted file mode 100644 index 1b182ac657..0000000000 --- a/config/examples/BigTreeTech/SKR Mini E3 1.2/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - #define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - #define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - #define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES true // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - #define SDCARD_CONNECTION ONBOARD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 32 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 32 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 32 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 32 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 400 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 350 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 580 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 580 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 650 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_24V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - #define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - #define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Cartesio/Configuration.h b/config/examples/Cartesio/Configuration.h deleted file mode 100644 index 2dfc3e915b..0000000000 --- a/config/examples/Cartesio/Configuration.h +++ /dev/null @@ -1,2225 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(MaukCC, CartesioE)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 115200 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - //#define MOTHERBOARD BOARD_CNCONTROLS_11 - #define MOTHERBOARD BOARD_CNCONTROLS_12 -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "CartesioE" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 3 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 -1 -#define TEMP_SENSOR_1 -1 -#define TEMP_SENSOR_2 1 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 4 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 1 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 415 -#define HEATER_1_MAXTEMP 415 -#define HEATER_2_MAXTEMP 415 -#define HEATER_3_MAXTEMP 415 -#define HEATER_4_MAXTEMP 415 -#define HEATER_5_MAXTEMP 415 -#define BED_MAXTEMP 165 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Cartesio extruderV6 40W Normal - #define DEFAULT_Kp 18 - #define DEFAULT_Ki 1 - #define DEFAULT_Kd 100 - - // Cartesio extruderV6 40W Volcano - //#define DEFAULT_Kp 50 - //#define DEFAULT_Ki 9 - //#define DEFAULT_Kd 70 - - // Cartesio extruderV6 40W Cyclops - //#define DEFAULT_Kp 18 - //#define DEFAULT_Ki 1 - //#define DEFAULT_Kd 100 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //24V 500W silicone heater on to 4mm glass CartesioW - #define DEFAULT_bedKp 390 - #define DEFAULT_bedKi 70 - #define DEFAULT_bedKd 546 - - //24V 250W silicone heater on to 4mm glass CartesioM - //#define DEFAULT_bedKp 303 - //#define DEFAULT_bedKi 42 - //#define DEFAULT_bedKd 539 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 71.128, 71.128, 640, 152 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 200, 200, 20, 20 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 1000, 1000, 100, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 10000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 1 -#define Y_ENABLE_ON 1 -#define Z_ENABLE_ON 1 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 435 -#define Y_BED_SIZE 270 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 400 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (10*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 190 -#define PREHEAT_1_TEMP_BED 50 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -#define ENCODER_PULSES_PER_STEP 2 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 -#define LCD_FEEDBACK_FREQUENCY_HZ 1000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -#define REPRAPWORLD_KEYPAD -#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Cartesio/Configuration_adv.h b/config/examples/Cartesio/Configuration_adv.h deleted file mode 100644 index dc0bf2237e..0000000000 --- a/config/examples/Cartesio/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -//#define E0_AUTO_FAN_PIN -1 -//#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 35 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -//#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 1 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - //#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Cartesio/_Bootscreen.h b/config/examples/Cartesio/_Bootscreen.h deleted file mode 100644 index e81968dbf2..0000000000 --- a/config/examples/Cartesio/_Bootscreen.h +++ /dev/null @@ -1,101 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Custom Boot Screen bitmap - * - * Place this file in the root with your configuration files - * and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h. - * - * Use the Marlin Bitmap Converter to make your own: - * http://marlinfw.org/tools/u8glib/converter.html - */ - -#define CUSTOM_BOOTSCREEN_BMPWIDTH 64 - -const unsigned char custom_start_bmp[] PROGMEM = { - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000111,B11000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00111111,B11111100,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000011,B11111111,B11111111,B11000000,B00000000,B00000000, - B00000000,B00000000,B00011111,B11111111,B11111111,B11110000,B00000000,B00000000, - B00000000,B00000000,B01111111,B11111111,B11111111,B11111100,B00000000,B00000000, - B00000000,B00000000,B11111111,B11111111,B11111111,B11111111,B00000000,B00000000, - B00000000,B00000011,B11111111,B11111111,B11111111,B11111111,B10000000,B00000000, - B00000000,B00000111,B11111111,B11111111,B11111111,B11111111,B11000000,B00000000, - B00000000,B00000000,B00000000,B00000111,B11000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000111,B11000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000111,B11000000,B00000000,B00000000,B00000000, - B00000000,B00001111,B00000111,B10000111,B11111111,B11111111,B11100000,B00000000, - B00000000,B00011111,B10001111,B11000111,B11111111,B11111111,B11110001,B00000000, - B00000001,B00011111,B10001111,B11000111,B11111111,B11111111,B11110001,B10000000, - B00000011,B00011111,B10001111,B11000111,B11111111,B11111111,B11110001,B10000000, - B00000111,B00011111,B10001111,B11000111,B11111111,B11111111,B11100001,B11000000, - B00000111,B00011111,B10001111,B11000111,B11000000,B00000000,B00000001,B11100000, - B00001111,B00011111,B10001111,B11000111,B11000000,B00000000,B00000001,B11100000, - B00001111,B00011111,B10001111,B11000111,B11000000,B00000000,B00000001,B11110000, - B00011111,B00011111,B10001111,B11000111,B11000000,B00000000,B00000001,B11110000, - B00011111,B00011111,B10001111,B11000111,B11111111,B11111111,B11100001,B11110000, - B00111111,B00011111,B10001111,B11000111,B11111111,B11111111,B11110001,B11111000, - B00111111,B00011111,B10001111,B11000111,B11111111,B11111111,B11110001,B11111000, - B00111111,B00011111,B10001111,B11000111,B11111111,B11111111,B11110001,B11111000, - B00111111,B00011111,B10001111,B11000111,B11111111,B11111111,B11100001,B11111000, - B01111111,B00011111,B10001111,B11000111,B11000000,B00000000,B00000001,B11111100, - B01111111,B00011111,B10001111,B11000111,B11000000,B00000000,B00000001,B11111100, - B01111111,B00011111,B10001111,B11000111,B11000000,B00000000,B00000001,B11111100, - B01111111,B00011111,B10001111,B11000111,B11000000,B00000000,B00000001,B11111100, - B01111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111100, - B01111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111100, - B01111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111100, - B01111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111100, - B01111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111100, - B01111111,B00000000,B00000000,B00000111,B11000111,B11100011,B11110001,B11111100, - B01111111,B00000000,B00000000,B00000111,B11000111,B11100011,B11110001,B11111100, - B01111111,B00000000,B00000000,B00000111,B11000111,B11100011,B11110001,B11111100, - B00111111,B00001111,B11111111,B11111111,B11000111,B11100011,B11110001,B11111000, - B00111111,B00011111,B11111111,B11111111,B11000111,B11100011,B11110001,B11111000, - B00111111,B00011111,B11111111,B11111111,B11000111,B11100011,B11110001,B11111000, - B00111111,B00011111,B11111111,B11111111,B11000111,B11100011,B11110001,B11111000, - B00011111,B00011111,B11111111,B11111111,B11000111,B11100011,B11110001,B11110000, - B00011111,B00001111,B11111111,B11111111,B11000111,B11100011,B11110001,B11110000, - B00011111,B00000000,B00000000,B00000111,B11000111,B11100011,B11110001,B11100000, - B00001111,B00000000,B00000000,B00000111,B11000111,B11100011,B11110001,B11100000, - B00001111,B00000000,B00000000,B00000111,B11000111,B11100011,B11110001,B11000000, - B00000111,B00001111,B11111111,B11111111,B11000111,B11100011,B11110001,B11000000, - B00000011,B00011111,B11111111,B11111111,B11000111,B11100011,B11110001,B10000000, - B00000011,B00011111,B11111111,B11111111,B11000111,B11100011,B11110001,B00000000, - B00000001,B00011111,B11111111,B11111111,B11000111,B11100011,B11110000,B00000000, - B00000000,B00011111,B11111111,B11111111,B11000111,B11100011,B11110000,B00000000, - B00000000,B00001111,B11111111,B11111111,B11000011,B11000001,B11100000,B00000000, - B00000000,B00000000,B00000000,B00000111,B11000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000111,B11000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000111,B11000000,B00000000,B00000000,B00000000, - B00000000,B00000111,B11111111,B11111111,B11111111,B11111111,B11000000,B00000000, - B00000000,B00000011,B11111111,B11111111,B11111111,B11111111,B10000000,B00000000, - B00000000,B00000001,B11111111,B11111111,B11111111,B11111110,B00000000,B00000000, - B00000000,B00000000,B01111111,B11111111,B11111111,B11111100,B00000000,B00000000, - B00000000,B00000000,B00011111,B11111111,B11111111,B11110000,B00000000,B00000000, - B00000000,B00000000,B00000111,B11111111,B11111111,B10000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B01111111,B11111000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000 -}; diff --git a/config/examples/Creality/CR-10/Configuration.h b/config/examples/Creality/CR-10/Configuration.h deleted file mode 100644 index 034f647a0e..0000000000 --- a/config/examples/Creality/CR-10/Configuration.h +++ /dev/null @@ -1,2236 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(Creality CR-10)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 115200 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_MELZI_CREALITY -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "CR-10" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 120 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Stock CR-10 tuned for 70C - #define DEFAULT_Kp 22.57 - #define DEFAULT_Ki 1.72 - #define DEFAULT_Kd 73.96 - - // Ultimaker - //#define DEFAULT_Kp 22.2 - //#define DEFAULT_Ki 1.08 - //#define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //Stock CR-10 Bed Tuned for 70C - #define DEFAULT_bedKp 426.68 - #define DEFAULT_bedKi 78.92 - #define DEFAULT_bedKd 576.71 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - //#define DEFAULT_bedKp 10.00 - //#define DEFAULT_bedKi .023 - //#define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 1000 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -//#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 95 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 500, 500, 15, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 2.7 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 10 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 10 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 5 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 300 -#define Y_BED_SIZE 300 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE + 20 -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 400 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (20*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 190 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Creality/CR-10/Configuration_adv.h b/config/examples/Creality/CR-10/Configuration_adv.h deleted file mode 100644 index ca0299ca87..0000000000 --- a/config/examples/Creality/CR-10/Configuration_adv.h +++ /dev/null @@ -1,2934 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - #define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G27" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - #define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 256 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES true // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 10 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 10 - - #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 4 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 420 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 8 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 120 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 6 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - #define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 650 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 650 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 580 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 650 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#define DEFAULT_STDDEV_FILAMENT_DIA 0.05 // Typical estimate for cheap filament -//#define DEFAULT_STDDEV_FILAMENT_DIA 0.02 // Typical advertised for higher quality filament - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN (DEFAULT_STDDEV_FILAMENT_DIA*4) // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Creality/CR-10/_Bootscreen.h b/config/examples/Creality/CR-10/_Bootscreen.h deleted file mode 100644 index 2008f5a302..0000000000 --- a/config/examples/Creality/CR-10/_Bootscreen.h +++ /dev/null @@ -1,56 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Custom Boot Screen bitmap - * - * Place this file in the root with your configuration files - * and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h. - * - * Use the Marlin Bitmap Converter to make your own: - * http://marlinfw.org/tools/u8glib/converter.html - */ - -#define CUSTOM_BOOTSCREEN_TIMEOUT 1000 -#define CUSTOM_BOOTSCREEN_BMPWIDTH 128 - -const unsigned char custom_start_bmp[] PROGMEM = { - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111100,B00000000,B00000000, - B00001111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000110,B00011111,B11000000, - B00011000,B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00111100,B00001100,B00000000,B00000000,B00000001,B10000011,B00001100,B01100000, - B00010000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00111100,B00001100,B00000000,B00000000,B00000001,B10000011,B00001100,B00110000, - B00110000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00001100,B00000000,B00000000,B00000000,B00000011,B00001100,B00011000, - B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00111111,B00001111,B00111100,B00000000,B00000011,B00001100,B00001100, - B01100000,B00000001,B11011111,B00001111,B11100000,B11111110,B00000000,B01100000,B00011100,B00011100,B00000110,B00011000,B00000000,B00000110,B00001100,B00001100, - B01100000,B00000000,B11110011,B00011000,B00110001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00011000,B00000000,B00011110,B00001100,B00001100, - B01100000,B00000000,B11100000,B00110000,B00111001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000011,B00001100,B00001100, - B01100000,B00000000,B11000000,B00110000,B00111000,B00001111,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100, - B01100000,B00000000,B11000000,B00111111,B11111000,B11111011,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100, - B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000001,B11110000,B00000001,B10000001,B10001100,B00001100, - B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000000,B11100000,B00000001,B10000001,B10001100,B00011000, - B00110000,B00110000,B11000000,B00011000,B00110001,B10000011,B00000000,B01100000,B00001100,B00001100,B01000000,B11100000,B00000001,B10000011,B10001100,B00110000, - B00011000,B01100000,B11000000,B00001100,B01100001,B10000111,B11000000,B11100000,B00011100,B00001100,B11000000,B01100000,B00000000,B11000011,B00001100,B01100000, - B00001111,B11000011,B11110000,B00000111,B11000000,B11111111,B11000111,B11111100,B01111111,B00000111,B10000001,B11000000,B00000000,B01111110,B00011111,B11000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000 -}; diff --git a/config/examples/Creality/CR-10/_Statusscreen.h b/config/examples/Creality/CR-10/_Statusscreen.h deleted file mode 100644 index 88c7d127b5..0000000000 --- a/config/examples/Creality/CR-10/_Statusscreen.h +++ /dev/null @@ -1,66 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Custom Status Screen bitmap - * - * Place this file in the root with your configuration files - * and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h. - * - * Use the Marlin Bitmap Converter to make your own: - * http://marlinfw.org/tools/u8glib/converter.html - */ - -// -// Status Screen Logo bitmap -// -#define STATUS_LOGO_X 8 -#define STATUS_LOGO_Y 5 -#define STATUS_LOGO_WIDTH 22 - -const unsigned char status_logo_bmp[] PROGMEM = { - B00111110,B00001111,B11110000, - B11000001,B10000110,B00011000, - B11000001,B10000110,B00001100, - B00000001,B10000110,B00000100, - B00000011,B00000110,B00000100, - B00011111,B00000110,B00000100, - B00000011,B00000110,B00000100, - B00000001,B10000110,B00000100, - B11000001,B10000110,B00001100, - B11000001,B10000110,B00011000, - B00111110,B00001111,B11110000 -}; - -// -// Use default bitmaps -// -#define STATUS_HOTEND_ANIM -#define STATUS_BED_ANIM -#if HOTENDS < 2 - #define STATUS_HEATERS_X 40 - #define STATUS_BED_X 72 -#else - #define STATUS_HEATERS_X 32 - #define STATUS_BED_X 80 -#endif diff --git a/config/examples/Creality/CR-10S/Configuration.h b/config/examples/Creality/CR-10S/Configuration.h deleted file mode 100644 index 362ed7dc71..0000000000 --- a/config/examples/Creality/CR-10S/Configuration.h +++ /dev/null @@ -1,2227 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(printedsolid.com, CR-10S)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 115200 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_CREALITY -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "CR-10S" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 250 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 120 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - #define DEFAULT_Kp 22.2 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 435 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 95 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 2500, 2500, 100, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 600 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 800 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.4 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.067 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR false -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 296 // Nozzle is at X4 when homed -#define Y_BED_SIZE 298 // Nozzle is at Y2 when homed - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS 319 // 15mm Extra space on the right end -#define Y_MAX_POS 306 // 4mm Extra space behind the bed -#define Z_MAX_POS 400 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING true // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - #define FIL_RUNOUT_PIN 2 // Creality CR10-S stock sensor - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - #define G26_MESH_VALIDATION // Enable G26 mesh validation - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -#define MANUAL_X_HOME_POS 4 -#define MANUAL_Y_HOME_POS 2 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT 150 // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT 150 // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (20*60) -#define HOMING_FEEDRATE_Z (8*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 205 -#define PREHEAT_1_TEMP_BED 60 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 250 -#define PREHEAT_2_TEMP_BED 80 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 3), (Y_MAX_POS - 3), 10 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Creality/CR-10S/Configuration_adv.h b/config/examples/Creality/CR-10S/Configuration_adv.h deleted file mode 100644 index 8ee60af5c6..0000000000 --- a/config/examples/Creality/CR-10S/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - #define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - #define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G27" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - #define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK true // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - #define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 5 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 5 - - #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 4 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 41 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 430 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 41 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 430 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 20 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 4 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 0 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 6 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - #define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 650 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 650 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 580 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 650 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Creality/CR-10S/_Bootscreen.h b/config/examples/Creality/CR-10S/_Bootscreen.h deleted file mode 100644 index 2008f5a302..0000000000 --- a/config/examples/Creality/CR-10S/_Bootscreen.h +++ /dev/null @@ -1,56 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Custom Boot Screen bitmap - * - * Place this file in the root with your configuration files - * and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h. - * - * Use the Marlin Bitmap Converter to make your own: - * http://marlinfw.org/tools/u8glib/converter.html - */ - -#define CUSTOM_BOOTSCREEN_TIMEOUT 1000 -#define CUSTOM_BOOTSCREEN_BMPWIDTH 128 - -const unsigned char custom_start_bmp[] PROGMEM = { - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111100,B00000000,B00000000, - B00001111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000110,B00011111,B11000000, - B00011000,B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00111100,B00001100,B00000000,B00000000,B00000001,B10000011,B00001100,B01100000, - B00010000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00111100,B00001100,B00000000,B00000000,B00000001,B10000011,B00001100,B00110000, - B00110000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00001100,B00000000,B00000000,B00000000,B00000011,B00001100,B00011000, - B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00111111,B00001111,B00111100,B00000000,B00000011,B00001100,B00001100, - B01100000,B00000001,B11011111,B00001111,B11100000,B11111110,B00000000,B01100000,B00011100,B00011100,B00000110,B00011000,B00000000,B00000110,B00001100,B00001100, - B01100000,B00000000,B11110011,B00011000,B00110001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00011000,B00000000,B00011110,B00001100,B00001100, - B01100000,B00000000,B11100000,B00110000,B00111001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000011,B00001100,B00001100, - B01100000,B00000000,B11000000,B00110000,B00111000,B00001111,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100, - B01100000,B00000000,B11000000,B00111111,B11111000,B11111011,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100, - B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000001,B11110000,B00000001,B10000001,B10001100,B00001100, - B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000000,B11100000,B00000001,B10000001,B10001100,B00011000, - B00110000,B00110000,B11000000,B00011000,B00110001,B10000011,B00000000,B01100000,B00001100,B00001100,B01000000,B11100000,B00000001,B10000011,B10001100,B00110000, - B00011000,B01100000,B11000000,B00001100,B01100001,B10000111,B11000000,B11100000,B00011100,B00001100,B11000000,B01100000,B00000000,B11000011,B00001100,B01100000, - B00001111,B11000011,B11110000,B00000111,B11000000,B11111111,B11000111,B11111100,B01111111,B00000111,B10000001,B11000000,B00000000,B01111110,B00011111,B11000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000 -}; diff --git a/config/examples/Creality/CR-10S/_Statusscreen.h b/config/examples/Creality/CR-10S/_Statusscreen.h deleted file mode 100644 index a26739681b..0000000000 --- a/config/examples/Creality/CR-10S/_Statusscreen.h +++ /dev/null @@ -1,74 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Custom Status Screen bitmap - * - * Place this file in the root with your configuration files - * and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h. - * - * Use the Marlin Bitmap Converter to make your own: - * http://marlinfw.org/tools/u8glib/converter.html - */ - -// -// Status Screen Logo bitmap -// -#define STATUS_LOGO_Y 1 -#define STATUS_LOGO_WIDTH 36 - -const unsigned char status_logo_bmp[] PROGMEM = { - B00111101,B11110000,B00000010,B00111000,B11110000, - B01000100,B10001000,B00000110,B01000101,B00010000, - B10000000,B10001000,B00000010,B01000101,B00000000, - B10000000,B11110000,B00000010,B01000100,B10000000, - B10000000,B10100011,B11110010,B01000100,B01100000, - B10000000,B10010000,B00000010,B01000100,B00010000, - B10000000,B10010000,B00000010,B01000100,B00010000, - B01000100,B10001000,B00000010,B01000101,B00010000, - B00111001,B11001100,B00000111,B00111001,B11100000, - B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00111000,B01110000,B11100000,B00000000, - B00000000,B01000100,B10001001,B00010000,B00000000, - B00000000,B00000100,B10001001,B00010000,B00000000, - B00000000,B00011000,B10001001,B00010000,B00000000, - B00000000,B00000100,B10001001,B00010000,B00000000, - B00000000,B00000100,B10001001,B00010000,B00000000, - B00000000,B00000100,B10001001,B00010000,B00000000, - B00000000,B01000100,B10001001,B00010000,B00000000, - B00000000,B00111000,B01110000,B11100000,B00000000 -}; - -// -// Use default bitmaps -// -#define STATUS_HOTEND_ANIM -#define STATUS_BED_ANIM -#define STATUS_HEATERS_XSPACE 20 -#if HOTENDS < 2 - #define STATUS_HEATERS_X 48 - #define STATUS_BED_X 72 -#else - #define STATUS_HEATERS_X 40 - #define STATUS_BED_X 80 -#endif diff --git a/config/examples/Creality/CR-10_5S/Configuration.h b/config/examples/Creality/CR-10_5S/Configuration.h deleted file mode 100644 index 8c376579b1..0000000000 --- a/config/examples/Creality/CR-10_5S/Configuration.h +++ /dev/null @@ -1,2229 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(Evgeny-SPB, CR-10 S5)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 115200 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_CREALITY -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "CR-10 S5" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 265 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 120 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - #define DEFAULT_Kp 22.2 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 1000 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } // Stock Creality -//#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 415 } // Creality with Bondtech extruder - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 300, 300, 100, 5000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 5.0 - #define DEFAULT_YJERK 5.0 - #define DEFAULT_ZJERK 0.4 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR false -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false // Stock Creality CR-10 5S -//#define INVERT_E0_DIR true // Creality with Bondtech extruder -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 510 // Nozzle is at X4 when homed -#define Y_BED_SIZE 510 // Nozzle is at Y2 when homed - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 510 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING true // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - #define FIL_RUNOUT_PIN 2 // Creality CR10-S stock sensor - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - #define G26_MESH_VALIDATION // Enable G26 mesh validation - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -#define MANUAL_X_HOME_POS 4 -#define MANUAL_Y_HOME_POS 2 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (20*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 205 -#define PREHEAT_1_TEMP_BED 60 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 250 -#define PREHEAT_2_TEMP_BED 80 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 20), (Y_MAX_POS - 20), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Creality/CR-10_5S/Configuration_adv.h b/config/examples/Creality/CR-10_5S/Configuration_adv.h deleted file mode 100644 index 4f08ea4957..0000000000 --- a/config/examples/Creality/CR-10_5S/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 4 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 600 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - #define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - #define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G27" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - #define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK true // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - #define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 10 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 10 - - #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 10 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 41 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 750 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 41 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 600 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - #define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 150 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 10 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 0 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 6 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - #define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Creality/CR-10_5S/_Bootscreen.h b/config/examples/Creality/CR-10_5S/_Bootscreen.h deleted file mode 100644 index 2008f5a302..0000000000 --- a/config/examples/Creality/CR-10_5S/_Bootscreen.h +++ /dev/null @@ -1,56 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Custom Boot Screen bitmap - * - * Place this file in the root with your configuration files - * and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h. - * - * Use the Marlin Bitmap Converter to make your own: - * http://marlinfw.org/tools/u8glib/converter.html - */ - -#define CUSTOM_BOOTSCREEN_TIMEOUT 1000 -#define CUSTOM_BOOTSCREEN_BMPWIDTH 128 - -const unsigned char custom_start_bmp[] PROGMEM = { - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111100,B00000000,B00000000, - B00001111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000110,B00011111,B11000000, - B00011000,B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00111100,B00001100,B00000000,B00000000,B00000001,B10000011,B00001100,B01100000, - B00010000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00111100,B00001100,B00000000,B00000000,B00000001,B10000011,B00001100,B00110000, - B00110000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00001100,B00000000,B00000000,B00000000,B00000011,B00001100,B00011000, - B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00111111,B00001111,B00111100,B00000000,B00000011,B00001100,B00001100, - B01100000,B00000001,B11011111,B00001111,B11100000,B11111110,B00000000,B01100000,B00011100,B00011100,B00000110,B00011000,B00000000,B00000110,B00001100,B00001100, - B01100000,B00000000,B11110011,B00011000,B00110001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00011000,B00000000,B00011110,B00001100,B00001100, - B01100000,B00000000,B11100000,B00110000,B00111001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000011,B00001100,B00001100, - B01100000,B00000000,B11000000,B00110000,B00111000,B00001111,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100, - B01100000,B00000000,B11000000,B00111111,B11111000,B11111011,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100, - B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000001,B11110000,B00000001,B10000001,B10001100,B00001100, - B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000000,B11100000,B00000001,B10000001,B10001100,B00011000, - B00110000,B00110000,B11000000,B00011000,B00110001,B10000011,B00000000,B01100000,B00001100,B00001100,B01000000,B11100000,B00000001,B10000011,B10001100,B00110000, - B00011000,B01100000,B11000000,B00001100,B01100001,B10000111,B11000000,B11100000,B00011100,B00001100,B11000000,B01100000,B00000000,B11000011,B00001100,B01100000, - B00001111,B11000011,B11110000,B00000111,B11000000,B11111111,B11000111,B11111100,B01111111,B00000111,B10000001,B11000000,B00000000,B01111110,B00011111,B11000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000 -}; diff --git a/config/examples/Creality/CR-10mini/Configuration.h b/config/examples/Creality/CR-10mini/Configuration.h deleted file mode 100644 index 93d74dbf60..0000000000 --- a/config/examples/Creality/CR-10mini/Configuration.h +++ /dev/null @@ -1,2245 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ - -/** - * Creality CR-10 Mini - * X=300mm Y=220mm Z=300mm - * E3DV6 Hotend - * Titan Extruder - * CR10_STOCKDISPLAY (RAMPS-compatible with single 10-pin plug) - */ - -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 115200 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_MELZI_CREALITY -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "CR-10 Mini" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 120 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Stock CR-10 tuned for 70C - #define DEFAULT_Kp 22.57 - #define DEFAULT_Ki 1.72 - #define DEFAULT_Kd 73.96 - - // Ultimaker - //#define DEFAULT_Kp 22.2 - //#define DEFAULT_Ki 1.08 - //#define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //Stock CR-10 Bed Tuned for 70C - #define DEFAULT_bedKp 426.68 - #define DEFAULT_bedKi 78.92 - #define DEFAULT_bedKd 576.71 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - //#define DEFAULT_bedKp 10.00 - //#define DEFAULT_bedKi .023 - //#define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 1000 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -//#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 79.60, 80, 400, 95 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 500, 500, 15, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 600 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.067 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 5 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 300 -#define Y_BED_SIZE 220 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 300 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (20*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 200 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 WESTERN - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Creality/CR-10mini/Configuration_adv.h b/config/examples/Creality/CR-10mini/Configuration_adv.h deleted file mode 100644 index 52e070fd0a..0000000000 --- a/config/examples/Creality/CR-10mini/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - #define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - #define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 4 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 420 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 8 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 120 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 6 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - #define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 580 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 580 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 650 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Creality/CR-10mini/_Bootscreen.h b/config/examples/Creality/CR-10mini/_Bootscreen.h deleted file mode 100644 index 2008f5a302..0000000000 --- a/config/examples/Creality/CR-10mini/_Bootscreen.h +++ /dev/null @@ -1,56 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Custom Boot Screen bitmap - * - * Place this file in the root with your configuration files - * and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h. - * - * Use the Marlin Bitmap Converter to make your own: - * http://marlinfw.org/tools/u8glib/converter.html - */ - -#define CUSTOM_BOOTSCREEN_TIMEOUT 1000 -#define CUSTOM_BOOTSCREEN_BMPWIDTH 128 - -const unsigned char custom_start_bmp[] PROGMEM = { - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111100,B00000000,B00000000, - B00001111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000110,B00011111,B11000000, - B00011000,B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00111100,B00001100,B00000000,B00000000,B00000001,B10000011,B00001100,B01100000, - B00010000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00111100,B00001100,B00000000,B00000000,B00000001,B10000011,B00001100,B00110000, - B00110000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00001100,B00000000,B00000000,B00000000,B00000011,B00001100,B00011000, - B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00111111,B00001111,B00111100,B00000000,B00000011,B00001100,B00001100, - B01100000,B00000001,B11011111,B00001111,B11100000,B11111110,B00000000,B01100000,B00011100,B00011100,B00000110,B00011000,B00000000,B00000110,B00001100,B00001100, - B01100000,B00000000,B11110011,B00011000,B00110001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00011000,B00000000,B00011110,B00001100,B00001100, - B01100000,B00000000,B11100000,B00110000,B00111001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000011,B00001100,B00001100, - B01100000,B00000000,B11000000,B00110000,B00111000,B00001111,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100, - B01100000,B00000000,B11000000,B00111111,B11111000,B11111011,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100, - B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000001,B11110000,B00000001,B10000001,B10001100,B00001100, - B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000000,B11100000,B00000001,B10000001,B10001100,B00011000, - B00110000,B00110000,B11000000,B00011000,B00110001,B10000011,B00000000,B01100000,B00001100,B00001100,B01000000,B11100000,B00000001,B10000011,B10001100,B00110000, - B00011000,B01100000,B11000000,B00001100,B01100001,B10000111,B11000000,B11100000,B00011100,B00001100,B11000000,B01100000,B00000000,B11000011,B00001100,B01100000, - B00001111,B11000011,B11110000,B00000111,B11000000,B11111111,B11000111,B11111100,B01111111,B00000111,B10000001,B11000000,B00000000,B01111110,B00011111,B11000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000 -}; diff --git a/config/examples/Creality/CR-10mini/_Statusscreen.h b/config/examples/Creality/CR-10mini/_Statusscreen.h deleted file mode 100644 index a002103274..0000000000 --- a/config/examples/Creality/CR-10mini/_Statusscreen.h +++ /dev/null @@ -1,74 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Custom Status Screen bitmap - * - * Place this file in the root with your configuration files - * and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h. - * - * Use the Marlin Bitmap Converter to make your own: - * http://marlinfw.org/tools/u8glib/converter.html - */ - -// -// Status Screen Logo bitmap -// -#define STATUS_LOGO_Y 5 -#define STATUS_LOGO_WIDTH 36 - -const unsigned char status_logo_bmp[] PROGMEM = { - B00000111,B11001111,B10000000,B00110001,B11100000, - B00001111,B11001111,B11000000,B01110011,B11110000, - B00001100,B00001100,B01000000,B01110011,B00110000, - B00001100,B00001100,B11000000,B00110011,B00110000, - B00001100,B00001111,B11001111,B00110011,B00110000, - B00001100,B00001101,B10001111,B00110011,B00110000, - B00001100,B00001100,B11000000,B00110011,B00110000, - B00001111,B11001100,B11000000,B00110011,B11110000, - B00000111,B11001100,B11000000,B00110001,B11100000, - B00000000,B00000000,B00000000,B00000000,B00000000, - B00000001,B10000011,B00110000,B00000011,B00000000, - B00000001,B10000011,B00110010,B00000011,B00000000, - B00000001,B11000111,B00000010,B11100000,B00000000, - B00000001,B11000111,B00110011,B11110011,B00000000, - B00000001,B11101111,B00110011,B00110011,B00000000, - B00000001,B10111011,B00110011,B00110011,B00000000, - B00000001,B10010011,B00110011,B00110011,B00000000, - B00000001,B10010011,B00110011,B00110011,B00000000, - B00000001,B10000011,B00110011,B00110011,B00000000 -}; - -// -// Use default bitmaps -// -#define STATUS_HOTEND_ANIM -#define STATUS_BED_ANIM -#define STATUS_HEATERS_XSPACE 20 -#if HOTENDS < 2 - #define STATUS_HEATERS_X 48 - #define STATUS_BED_X 72 -#else - #define STATUS_HEATERS_X 40 - #define STATUS_BED_X 80 -#endif diff --git a/config/examples/Creality/CR-20 Pro/Configuration.h b/config/examples/Creality/CR-20 Pro/Configuration.h deleted file mode 100644 index 6bc655ef1b..0000000000 --- a/config/examples/Creality/CR-20 Pro/Configuration.h +++ /dev/null @@ -1,2230 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(CR-20 Pro)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 115200 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "CR-20 Pro" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 125 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - // Creality Ender-3 - #define DEFAULT_Kp 21.73 - #define DEFAULT_Ki 1.54 - #define DEFAULT_Kd 76.55 - - // Ultimaker - //#define DEFAULT_Kp 22.2 - //#define DEFAULT_Ki 1.08 - //#define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 97 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { -43, -5, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -//#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR false -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 235 -#define Y_BED_SIZE 235 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 250 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (20*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 185 -#define PREHEAT_1_TEMP_BED 45 -#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 70 -#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 WESTERN - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Creality/CR-20 Pro/Configuration_adv.h b/config/examples/Creality/CR-20 Pro/Configuration_adv.h deleted file mode 100644 index 82d3b34dd4..0000000000 --- a/config/examples/Creality/CR-20 Pro/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - #define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - #define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Creality/CR-20 Pro/_Statusscreen.h b/config/examples/Creality/CR-20 Pro/_Statusscreen.h deleted file mode 100644 index e88e5fefa1..0000000000 --- a/config/examples/Creality/CR-20 Pro/_Statusscreen.h +++ /dev/null @@ -1,72 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ - -/** - * Custom Status Screen bitmap - * - * Place this file in the root with your configuration files - * and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h. - * - * Use the Marlin Bitmap Converter to make your own: - * http://marlinfw.org/tools/u8glib/converter.html - */ - -// -// Status Screen Logo bitmap -// -#define STATUS_LOGO_WIDTH 32 - -const unsigned char status_logo_bmp[] PROGMEM = { - B00001111,B01111100,B00111000,B01110000, - B00010001,B00100010,B01000100,B10001000, - B00100000,B00100010,B01000100,B10001000, - B00100000,B00111100,B00000100,B10001000, - B00100000,B00101000,B00001000,B10001000, - B00100000,B00100100,B00010000,B10001000, - B00100000,B00100100,B00100000,B10001000, - B00010001,B00100010,B01000000,B10001000, - B00001110,B01110011,B01111100,B01110000, - B00000000,B00000000,B00000000,B00000000, - B00000111,B11000000,B00000000,B00000000, - B00000010,B00100000,B00000000,B00000000, - B00000010,B00100000,B00000000,B00000000, - B00000010,B00100110,B11000111,B00000000, - B00000011,B11000011,B00001000,B10000000, - B00000010,B00000010,B00001000,B10000000, - B00000010,B00000010,B00001000,B10000000, - B00000010,B00000010,B00001000,B10000000, - B00000111,B00000111,B10000111,B00000000 -}; - -// -// Use default bitmaps -// -#define STATUS_HOTEND_ANIM -#define STATUS_BED_ANIM -#define STATUS_HEATERS_XSPACE 20 -#if HOTENDS < 2 - #define STATUS_HEATERS_X 48 - #define STATUS_BED_X 72 -#else - #define STATUS_HEATERS_X 40 - #define STATUS_BED_X 80 -#endif diff --git a/config/examples/Creality/CR-20/Configuration.h b/config/examples/Creality/CR-20/Configuration.h deleted file mode 100644 index 5a0fb8dbef..0000000000 --- a/config/examples/Creality/CR-20/Configuration.h +++ /dev/null @@ -1,2230 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(m0oml)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 115200 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "CR-20" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 125 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - // Creality Ender-3 - #define DEFAULT_Kp 21.73 - #define DEFAULT_Ki 1.54 - #define DEFAULT_Kd 76.55 - - // Ultimaker - //#define DEFAULT_Kp 22.2 - //#define DEFAULT_Ki 1.08 - //#define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 97 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -//#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 235 -#define Y_BED_SIZE 235 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 250 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (20*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 185 -#define PREHEAT_1_TEMP_BED 45 -#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 0 -#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 WESTERN - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Creality/CR-20/Configuration_adv.h b/config/examples/Creality/CR-20/Configuration_adv.h deleted file mode 100644 index a5e4b9ebd3..0000000000 --- a/config/examples/Creality/CR-20/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - #define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Creality/CR-8/Configuration.h b/config/examples/Creality/CR-8/Configuration.h deleted file mode 100644 index 3cc9dccd85..0000000000 --- a/config/examples/Creality/CR-8/Configuration.h +++ /dev/null @@ -1,2236 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(D-side, CR-8)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 115200 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_ENDER_4 -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "CR-8" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ender-4 - #define DEFAULT_Kp 21.73 - #define DEFAULT_Ki 1.54 - #define DEFAULT_Kd 76.55 - - // Ultimaker - //#define DEFAULT_Kp 22.2 - //#define DEFAULT_Ki 1.08 - //#define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - // Ender-4 - #define DEFAULT_bedKp 426.68 - #define DEFAULT_bedKi 78.92 - #define DEFAULT_bedKd 576.71 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - //#define DEFAULT_bedKp 10.00 - //#define DEFAULT_bedKi .023 - //#define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 190 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 500 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 92.60 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.4 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_ENDSTOP_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 220 -#define Y_BED_SIZE 220 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 310 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - #define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (20*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 200 -#define PREHEAT_1_TEMP_BED 60 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Creality/CR-8/Configuration_adv.h b/config/examples/Creality/CR-8/Configuration_adv.h deleted file mode 100644 index e760d93638..0000000000 --- a/config/examples/Creality/CR-8/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - #define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z false // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 5 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 5 - - #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Creality/Ender-2/Configuration.h b/config/examples/Creality/Ender-2/Configuration.h deleted file mode 100644 index c9a9f879bd..0000000000 --- a/config/examples/Creality/Ender-2/Configuration.h +++ /dev/null @@ -1,2230 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(tommie, Ender 2/4)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 115200 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_MELZI_CREALITY -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Ender 3D" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 75 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - // Creality Ender - #define DEFAULT_Kp 21.73 - #define DEFAULT_Ki 1.54 - #define DEFAULT_Kd 76.55 - - // Ultimaker - //#define DEFAULT_Kp 22.2 - //#define DEFAULT_Ki 1.08 - //#define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -//#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 150 -#define Y_BED_SIZE 150 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (20*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 185 -#define PREHEAT_1_TEMP_BED 45 -#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 0 -#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Creality/Ender-2/Configuration_adv.h b/config/examples/Creality/Ender-2/Configuration_adv.h deleted file mode 100644 index a2000e7331..0000000000 --- a/config/examples/Creality/Ender-2/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 1 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - #define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 0 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -//#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Creality/Ender-2/README.md b/config/examples/Creality/Ender-2/README.md deleted file mode 100644 index b45eb94690..0000000000 --- a/config/examples/Creality/Ender-2/README.md +++ /dev/null @@ -1,33 +0,0 @@ -# Creality Ender Support - -This branch is a reverse-engineered version based on the unpublished firmware from Creality. It is **not** the authoritative source, but has been carefully re-built by looking at their firmware and inferring the base version and configuration they used. The basis is the firmware version from "Jul 31 2017 10:16:30". It is based on Marlin 1.0.1, because - -* 1.0.0 had very different serial output in `setup()` and overall code structure. -* 1.0.2 changed the `VERSION_STRING` to include a leading space, and `lcd_init` uses `SET_INPUT` instead of `pinMode`. - -Configurations were found by seeing what code was compiled into the firmware, and constants used there. - -For U8Glib, at least version 1.14 and at most 1.17 is used, because - -* 1.12 didn't have the extra speed argument to u8g_InitCom. -* 1.13 didn't have the soft reset instruction for UC1701 initialization. -* 1.18 has a new directory structure. - -## Bitmaps - -The bootscreen and custom status screens come from Creality's firmware. - -## Creality Ender-2 firmware status - -The firmware source code has been published on 2018/07/10. -It is based on Marlin 1.1. The source code and .hex binaries for all printers (including Ender-2) can be obtained from: -https://www.creality3d.cn/download/firmware_c0001 - -And repositories for CR-10S and Ender-3 can be found here: -https://github.com/Creality3DPrinting - -The configuration files have been verified to match the original configuration, but further investigation is needed to ensure there aren't any extra changes in the source code. - -## Ender-2 specific changelog: - -* 2018/10/08 - Updated BED_MAXTEMP to 75 to match the original Creality Ender-2 Firmware (which is now open source) diff --git a/config/examples/Creality/Ender-2/_Bootscreen.h b/config/examples/Creality/Ender-2/_Bootscreen.h deleted file mode 100644 index e1402b2bbe..0000000000 --- a/config/examples/Creality/Ender-2/_Bootscreen.h +++ /dev/null @@ -1,97 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Custom Boot Screen bitmap - * - * Place this file in the root with your configuration files - * and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h. - * - * Use the Marlin Bitmap Converter to make your own: - * http://marlinfw.org/tools/u8glib/converter.html - */ - -#define CUSTOM_BOOTSCREEN_TIMEOUT 1000 -#define CUSTOM_BOOTSCREEN_BMPWIDTH 81 -#define CUSTOM_BOOTSCREEN_INVERTED - -const unsigned char custom_start_bmp[] PROGMEM = { - B11111111,B11111111,B11111111,B11111111,B11101111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11101111,B11101111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11100111,B11011111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11100111,B11011111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11100011,B11011111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11110011,B11001111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11100001,B11100001,B11001111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111110,B01111000,B00000000,B00000000,B00000011,B11011101,B11111111,B11111111,B11111111,B11111111, - B11111110,B11111111,B10000000,B01111110,B00000000,B00000001,B11101110,B11111111,B11111111,B11111111,B11111111, - B11111110,B01111101,B11001111,B11111100,B00000000,B00000000,B11110111,B01111111,B11111111,B11111111,B11111111, - B11111111,B10001110,B00000110,B00000000,B00000000,B00000000,B01111011,B10111111,B11111111,B11111111,B11111111, - B11111111,B11000000,B00000000,B00000000,B00000000,B00000000,B01111101,B11011111,B11111111,B11111111,B11111111, - B11111111,B11111100,B00000001,B11111110,B00000000,B00000000,B00111110,B11100111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111100,B00000000,B00000011,B00011111,B01110011,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111000,B00000000,B00000001,B10001111,B10000001,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11100000,B00000000,B00000000,B10000011,B11111001,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B00000000,B11111100,B00000000,B00000000,B11110000,B11111111,B11111111,B11111111, - B11111111,B11111111,B11100000,B00001111,B11111111,B11000000,B00000000,B00000000,B11111111,B11111111,B11111111, - B11111111,B11111110,B00000011,B11111111,B11111111,B11000000,B00000000,B00000000,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111001,B00000000,B00000000,B00000000,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111100,B00000000,B00000111,B11000000,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B00000000,B00000111,B11100000,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11100000,B00000111,B11110001,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111100,B00000111,B11111001,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B00000011,B11111001,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B10000011,B11111001,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11000011,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11100001,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11110000,B10111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111011,B11111000,B00111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111001,B11111000,B00111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B01111110,B11110000,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B10001110,B00000011,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11100000,B00011111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B01111111,B11111111,B11111111,B11111111, - B11111111,B00000000,B00000000,B01111111,B11111111,B11111111,B11111000,B01111111,B11111111,B11111111,B11111111, - B11111111,B10000000,B00000000,B01111111,B11111111,B11111111,B11100000,B01111111,B11111111,B11111111,B11111111, - B11111111,B11000011,B11111100,B11111111,B11111111,B11111111,B11111000,B11111111,B11111111,B11111111,B11111111, - B11111111,B11000011,B11111100,B11111111,B11111111,B11111111,B11111000,B11111111,B11111111,B11111111,B11111111, - B11111111,B10000111,B11111101,B11111111,B11111111,B11111111,B11110001,B11111111,B11111111,B11111111,B11111111, - B11111111,B10000111,B11111111,B11111111,B11111111,B11111111,B11110001,B11111111,B11111111,B11111111,B11111111, - B11111111,B00001111,B11100111,B11110011,B00001111,B11111100,B00100011,B11111100,B00111111,B11111111,B11111111, - B11111111,B00001111,B11101111,B10000000,B00000111,B11110000,B00000011,B11110000,B00011110,B00000000,B01111111, - B11111110,B00011111,B11001111,B10000001,B10000111,B11000111,B10000111,B11000111,B00001100,B00000000,B01111111, - B11111110,B00000000,B00011111,B11000111,B11000111,B10001111,B11000111,B10011111,B00001111,B00001100,B11111111, - B11111110,B00000000,B00011111,B10000111,B10001111,B00011111,B10001111,B00011111,B00001111,B00011111,B11111111, - B11111100,B00111111,B10011111,B10001111,B10001111,B00011111,B10001110,B00000000,B00011110,B00111111,B11111111, - B11111100,B01111111,B00111111,B00001111,B00011110,B00111111,B00011110,B00111111,B11111110,B00111111,B11111111, - B11111000,B01111111,B11111111,B00011111,B00011100,B00111111,B00011100,B01111111,B11111100,B01111111,B11111111, - B11111000,B11111111,B11111111,B00011110,B00011100,B01111110,B00011100,B01111111,B11111100,B01111111,B11111111, - B11110000,B11111111,B11001110,B00111110,B00111100,B01111110,B00111100,B01111111,B10111000,B11111111,B11111111, - B11110000,B11111111,B10011110,B00111100,B00111000,B01111100,B00111000,B01111110,B01111000,B11111111,B11111111, - B11100001,B11111111,B00111100,B01111100,B01111000,B01111100,B01111000,B00111100,B11110001,B11111111,B11111111, - B11100001,B11111000,B00111000,B01111000,B01111000,B00010000,B00011000,B00000001,B11110001,B11111111,B11111111, - B00000000,B00000000,B01100000,B00100000,B00111100,B00000000,B01111100,B00000111,B10000000,B01111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111110,B00011111,B11111110,B00011111,B11111111,B11111111,B11111111 -}; diff --git a/config/examples/Creality/Ender-2/_Statusscreen.h b/config/examples/Creality/Ender-2/_Statusscreen.h deleted file mode 100644 index 7a412ad7f4..0000000000 --- a/config/examples/Creality/Ender-2/_Statusscreen.h +++ /dev/null @@ -1,66 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Custom Status Screen bitmap - * - * Place this file in the root with your configuration files - * and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h. - * - * Use the Marlin Bitmap Converter to make your own: - * http://marlinfw.org/tools/u8glib/converter.html - */ - -// -// Status Screen Logo bitmap -// -#define STATUS_LOGO_Y 5 -#define STATUS_LOGO_WIDTH 39 - -const unsigned char status_logo_bmp[] PROGMEM = { - B00000000,B00000000,B00000110,B00000000,B00000000, - B11111110,B00000000,B00000010,B00000000,B00000000, - B01000010,B00000000,B00000010,B00000000,B00000000, - B01001000,B00000000,B00000010,B00000000,B00000000, - B01001000,B11011100,B00111110,B00111100,B11101110, - B01111000,B01100010,B01000010,B01000010,B00110010, - B01001000,B01000010,B01000010,B01000010,B00100000, - B01001000,B01000010,B01000010,B01111110,B00100000, - B01000000,B01000010,B01000010,B01000000,B00100000, - B01000010,B01000010,B01000110,B01000010,B00100000, - B11111110,B11100111,B00111011,B00111100,B11111000 -}; - -// -// Use default bitmaps -// -#define STATUS_HOTEND_ANIM -#define STATUS_BED_ANIM -#define STATUS_HEATERS_XSPACE 20 -#if HOTENDS < 2 - #define STATUS_HEATERS_X 48 - #define STATUS_BED_X 72 -#else - #define STATUS_HEATERS_X 40 - #define STATUS_BED_X 80 -#endif diff --git a/config/examples/Creality/Ender-3/Configuration.h b/config/examples/Creality/Ender-3/Configuration.h deleted file mode 100644 index b6ee81f6f8..0000000000 --- a/config/examples/Creality/Ender-3/Configuration.h +++ /dev/null @@ -1,2230 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(thisiskeithb, Ender-3)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 115200 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_MELZI_CREALITY -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Ender-3" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 125 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - // Creality Ender-3 - #define DEFAULT_Kp 21.73 - #define DEFAULT_Ki 1.54 - #define DEFAULT_Kd 76.55 - - // Ultimaker - //#define DEFAULT_Kp 22.2 - //#define DEFAULT_Ki 1.08 - //#define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -//#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 235 -#define Y_BED_SIZE 235 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 250 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (20*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 185 -#define PREHEAT_1_TEMP_BED 45 -#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 0 -#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 WESTERN - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Creality/Ender-3/Configuration_adv.h b/config/examples/Creality/Ender-3/Configuration_adv.h deleted file mode 100644 index 18a67eb87e..0000000000 --- a/config/examples/Creality/Ender-3/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - #define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - #define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 580 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 580 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 650 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_24V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Creality/Ender-3/_Bootscreen.h b/config/examples/Creality/Ender-3/_Bootscreen.h deleted file mode 100644 index e1402b2bbe..0000000000 --- a/config/examples/Creality/Ender-3/_Bootscreen.h +++ /dev/null @@ -1,97 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Custom Boot Screen bitmap - * - * Place this file in the root with your configuration files - * and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h. - * - * Use the Marlin Bitmap Converter to make your own: - * http://marlinfw.org/tools/u8glib/converter.html - */ - -#define CUSTOM_BOOTSCREEN_TIMEOUT 1000 -#define CUSTOM_BOOTSCREEN_BMPWIDTH 81 -#define CUSTOM_BOOTSCREEN_INVERTED - -const unsigned char custom_start_bmp[] PROGMEM = { - B11111111,B11111111,B11111111,B11111111,B11101111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11101111,B11101111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11100111,B11011111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11100111,B11011111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11100011,B11011111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11110011,B11001111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11100001,B11100001,B11001111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111110,B01111000,B00000000,B00000000,B00000011,B11011101,B11111111,B11111111,B11111111,B11111111, - B11111110,B11111111,B10000000,B01111110,B00000000,B00000001,B11101110,B11111111,B11111111,B11111111,B11111111, - B11111110,B01111101,B11001111,B11111100,B00000000,B00000000,B11110111,B01111111,B11111111,B11111111,B11111111, - B11111111,B10001110,B00000110,B00000000,B00000000,B00000000,B01111011,B10111111,B11111111,B11111111,B11111111, - B11111111,B11000000,B00000000,B00000000,B00000000,B00000000,B01111101,B11011111,B11111111,B11111111,B11111111, - B11111111,B11111100,B00000001,B11111110,B00000000,B00000000,B00111110,B11100111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111100,B00000000,B00000011,B00011111,B01110011,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111000,B00000000,B00000001,B10001111,B10000001,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11100000,B00000000,B00000000,B10000011,B11111001,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B00000000,B11111100,B00000000,B00000000,B11110000,B11111111,B11111111,B11111111, - B11111111,B11111111,B11100000,B00001111,B11111111,B11000000,B00000000,B00000000,B11111111,B11111111,B11111111, - B11111111,B11111110,B00000011,B11111111,B11111111,B11000000,B00000000,B00000000,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111001,B00000000,B00000000,B00000000,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111100,B00000000,B00000111,B11000000,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B00000000,B00000111,B11100000,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11100000,B00000111,B11110001,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111100,B00000111,B11111001,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B00000011,B11111001,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B10000011,B11111001,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11000011,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11100001,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11110000,B10111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111011,B11111000,B00111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111001,B11111000,B00111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B01111110,B11110000,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B10001110,B00000011,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11100000,B00011111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B01111111,B11111111,B11111111,B11111111, - B11111111,B00000000,B00000000,B01111111,B11111111,B11111111,B11111000,B01111111,B11111111,B11111111,B11111111, - B11111111,B10000000,B00000000,B01111111,B11111111,B11111111,B11100000,B01111111,B11111111,B11111111,B11111111, - B11111111,B11000011,B11111100,B11111111,B11111111,B11111111,B11111000,B11111111,B11111111,B11111111,B11111111, - B11111111,B11000011,B11111100,B11111111,B11111111,B11111111,B11111000,B11111111,B11111111,B11111111,B11111111, - B11111111,B10000111,B11111101,B11111111,B11111111,B11111111,B11110001,B11111111,B11111111,B11111111,B11111111, - B11111111,B10000111,B11111111,B11111111,B11111111,B11111111,B11110001,B11111111,B11111111,B11111111,B11111111, - B11111111,B00001111,B11100111,B11110011,B00001111,B11111100,B00100011,B11111100,B00111111,B11111111,B11111111, - B11111111,B00001111,B11101111,B10000000,B00000111,B11110000,B00000011,B11110000,B00011110,B00000000,B01111111, - B11111110,B00011111,B11001111,B10000001,B10000111,B11000111,B10000111,B11000111,B00001100,B00000000,B01111111, - B11111110,B00000000,B00011111,B11000111,B11000111,B10001111,B11000111,B10011111,B00001111,B00001100,B11111111, - B11111110,B00000000,B00011111,B10000111,B10001111,B00011111,B10001111,B00011111,B00001111,B00011111,B11111111, - B11111100,B00111111,B10011111,B10001111,B10001111,B00011111,B10001110,B00000000,B00011110,B00111111,B11111111, - B11111100,B01111111,B00111111,B00001111,B00011110,B00111111,B00011110,B00111111,B11111110,B00111111,B11111111, - B11111000,B01111111,B11111111,B00011111,B00011100,B00111111,B00011100,B01111111,B11111100,B01111111,B11111111, - B11111000,B11111111,B11111111,B00011110,B00011100,B01111110,B00011100,B01111111,B11111100,B01111111,B11111111, - B11110000,B11111111,B11001110,B00111110,B00111100,B01111110,B00111100,B01111111,B10111000,B11111111,B11111111, - B11110000,B11111111,B10011110,B00111100,B00111000,B01111100,B00111000,B01111110,B01111000,B11111111,B11111111, - B11100001,B11111111,B00111100,B01111100,B01111000,B01111100,B01111000,B00111100,B11110001,B11111111,B11111111, - B11100001,B11111000,B00111000,B01111000,B01111000,B00010000,B00011000,B00000001,B11110001,B11111111,B11111111, - B00000000,B00000000,B01100000,B00100000,B00111100,B00000000,B01111100,B00000111,B10000000,B01111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111110,B00011111,B11111110,B00011111,B11111111,B11111111,B11111111 -}; diff --git a/config/examples/Creality/Ender-3/_Statusscreen.h b/config/examples/Creality/Ender-3/_Statusscreen.h deleted file mode 100644 index 025801f4fc..0000000000 --- a/config/examples/Creality/Ender-3/_Statusscreen.h +++ /dev/null @@ -1,62 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Custom Status Screen bitmap - * - * Place this file in the root with your configuration files - * and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h. - * - * Use the Marlin Bitmap Converter to make your own: - * http://marlinfw.org/tools/u8glib/converter.html - */ - -// -// Status Screen Logo bitmap -// -#define STATUS_LOGO_Y 8 -#define STATUS_LOGO_WIDTH 39 - -const unsigned char status_logo_bmp[] PROGMEM = { - B11111000,B00000001,B10000000,B00000000,B00001100, - B01001000,B00000000,B10000000,B00000000,B00010010, - B01000011,B11000011,B10001100,B11010000,B00000010, - B01110001,B00100100,B10010010,B01100111,B11001100, - B01000001,B00100100,B10011110,B01000000,B00000010, - B01001001,B00100100,B10010000,B01000000,B00010010, - B11111011,B10110011,B11001110,B11100000,B00001100 -}; - -// -// Use default bitmaps -// -#define STATUS_HOTEND_ANIM -#define STATUS_BED_ANIM -#define STATUS_HEATERS_XSPACE 20 -#if HOTENDS < 2 - #define STATUS_HEATERS_X 48 - #define STATUS_BED_X 72 -#else - #define STATUS_HEATERS_X 40 - #define STATUS_BED_X 80 -#endif diff --git a/config/examples/Creality/Ender-4/Configuration.h b/config/examples/Creality/Ender-4/Configuration.h deleted file mode 100644 index 49605342b0..0000000000 --- a/config/examples/Creality/Ender-4/Configuration.h +++ /dev/null @@ -1,2236 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(Skorpi, Creality Ender-4, brandstaetter)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 115200 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_ENDER_4 -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Ender-4" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ender-4 - #define DEFAULT_Kp 16.67 - #define DEFAULT_Ki 1.12 - #define DEFAULT_Kd 62.14 - - // Ultimaker -// #define DEFAULT_Kp 22.2 -// #define DEFAULT_Ki 1.08 -// #define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - // Ender-4 - #define DEFAULT_bedKp 426.68 - #define DEFAULT_bedKi 78.92 - #define DEFAULT_bedKd 576.71 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - //#define DEFAULT_bedKp 10.00 - //#define DEFAULT_bedKi .023 - //#define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 190 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 750 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 100 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 500, 500, 15, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 2.4 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR true -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 220 -#define Y_BED_SIZE 220 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 310 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - #define G26_MESH_VALIDATION // Enable G26 mesh validation - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (20*60) -#define HOMING_FEEDRATE_Z (7*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 200 -#define PREHEAT_1_TEMP_BED 60 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Creality/Ender-4/Configuration_adv.h b/config/examples/Creality/Ender-4/Configuration_adv.h deleted file mode 100644 index f0cdde0e22..0000000000 --- a/config/examples/Creality/Ender-4/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 30 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON false // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - #define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - #define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z false // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G27" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 2 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 2 - - #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 35 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 650 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 35 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 600 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - #define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 60 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - #define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Creality/Ender-5 Pro/Configuration.h b/config/examples/Creality/Ender-5 Pro/Configuration.h deleted file mode 100644 index f18c2fe03d..0000000000 --- a/config/examples/Creality/Ender-5 Pro/Configuration.h +++ /dev/null @@ -1,2224 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(thisiskeithb, Ender-5 Pro)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 115200 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_MELZI_CREALITY -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Ender-5 Pro" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 125 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - // Creality Ender-5 Pro - #define DEFAULT_Kp 21.73 - #define DEFAULT_Ki 1.54 - #define DEFAULT_Kd 76.55 - - // Ultimaker - //#define DEFAULT_Kp 22.2 - //#define DEFAULT_Ki 1.08 - //#define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -//#define USE_XMIN_PLUG -//#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -#define USE_XMAX_PLUG -#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 800, 93 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -//#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR true -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR 1 -#define Y_HOME_DIR 1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 220 -#define Y_BED_SIZE 220 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 300 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (20*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 185 -#define PREHEAT_1_TEMP_BED 45 -#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 0 -#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 WESTERN - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Creality/Ender-5 Pro/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/Configuration_adv.h deleted file mode 100644 index a477c3bfbd..0000000000 --- a/config/examples/Creality/Ender-5 Pro/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - #define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z false // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - #define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 650 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 580 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 650 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_24V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Creality/Ender-5 Pro/_Bootscreen.h b/config/examples/Creality/Ender-5 Pro/_Bootscreen.h deleted file mode 100644 index 52119ce6be..0000000000 --- a/config/examples/Creality/Ender-5 Pro/_Bootscreen.h +++ /dev/null @@ -1,96 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ - -/** - * Custom Boot Screen bitmap - * - * Place this file in the root with your configuration files - * and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h. - * - * Use the Marlin Bitmap Converter to make your own: - * http://marlinfw.org/tools/u8glib/converter.html - */ - -#define CUSTOM_BOOTSCREEN_TIMEOUT 1000 -#define CUSTOM_BOOTSCREEN_BMPWIDTH 81 -#define CUSTOM_BOOTSCREEN_INVERTED - -const unsigned char custom_start_bmp[] PROGMEM = { - B11111111,B11111111,B11111111,B11111111,B11101111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11101111,B11101111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11100111,B11011111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11100111,B11011111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11100011,B11011111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11110011,B11001111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11100001,B11100001,B11001111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111110,B01111000,B00000000,B00000000,B00000011,B11011101,B11111111,B11111111,B11111111,B11111111, - B11111110,B11111111,B10000000,B01111110,B00000000,B00000001,B11101110,B11111111,B11111111,B11111111,B11111111, - B11111110,B01111101,B11001111,B11111100,B00000000,B00000000,B11110111,B01111111,B11111111,B11111111,B11111111, - B11111111,B10001110,B00000110,B00000000,B00000000,B00000000,B01111011,B10111111,B11111111,B11111111,B11111111, - B11111111,B11000000,B00000000,B00000000,B00000000,B00000000,B01111101,B11011111,B11111111,B11111111,B11111111, - B11111111,B11111100,B00000001,B11111110,B00000000,B00000000,B00111110,B11100111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111100,B00000000,B00000011,B00011111,B01110011,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111000,B00000000,B00000001,B10001111,B10000001,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11100000,B00000000,B00000000,B10000011,B11111001,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B00000000,B11111100,B00000000,B00000000,B11110000,B11111111,B11111111,B11111111, - B11111111,B11111111,B11100000,B00001111,B11111111,B11000000,B00000000,B00000000,B11111111,B11111111,B11111111, - B11111111,B11111110,B00000011,B11111111,B11111111,B11000000,B00000000,B00000000,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111001,B00000000,B00000000,B00000000,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111100,B00000000,B00000111,B11000000,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B00000000,B00000111,B11100000,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11100000,B00000111,B11110001,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111100,B00000111,B11111001,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B00000011,B11111001,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B10000011,B11111001,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11000011,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11100001,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11110000,B10111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111011,B11111000,B00111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111001,B11111000,B00111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B01111110,B11110000,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B10001110,B00000011,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11100000,B00011111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B01111111,B11111111,B11111111,B11111111, - B11111111,B00000000,B00000000,B01111111,B11111111,B11111111,B11111000,B01111111,B11111111,B11111111,B11111111, - B11111111,B10000000,B00000000,B01111111,B11111111,B11111111,B11100000,B01111111,B11111111,B11111111,B11111111, - B11111111,B11000011,B11111100,B11111111,B11111111,B11111111,B11111000,B11111111,B11111111,B11111111,B11111111, - B11111111,B11000011,B11111100,B11111111,B11111111,B11111111,B11111000,B11111111,B11111111,B11111111,B11111111, - B11111111,B10000111,B11111101,B11111111,B11111111,B11111111,B11110001,B11111111,B11111111,B11111111,B11111111, - B11111111,B10000111,B11111111,B11111111,B11111111,B11111111,B11110001,B11111111,B11111111,B11111111,B11111111, - B11111111,B00001111,B11100111,B11110011,B00001111,B11111100,B00100011,B11111100,B00111111,B11111111,B11111111, - B11111111,B00001111,B11101111,B10000000,B00000111,B11110000,B00000011,B11110000,B00011110,B00000000,B01111111, - B11111110,B00011111,B11001111,B10000001,B10000111,B11000111,B10000111,B11000111,B00001100,B00000000,B01111111, - B11111110,B00000000,B00011111,B11000111,B11000111,B10001111,B11000111,B10011111,B00001111,B00001100,B11111111, - B11111110,B00000000,B00011111,B10000111,B10001111,B00011111,B10001111,B00011111,B00001111,B00011111,B11111111, - B11111100,B00111111,B10011111,B10001111,B10001111,B00011111,B10001110,B00000000,B00011110,B00111111,B11111111, - B11111100,B01111111,B00111111,B00001111,B00011110,B00111111,B00011110,B00111111,B11111110,B00111111,B11111111, - B11111000,B01111111,B11111111,B00011111,B00011100,B00111111,B00011100,B01111111,B11111100,B01111111,B11111111, - B11111000,B11111111,B11111111,B00011110,B00011100,B01111110,B00011100,B01111111,B11111100,B01111111,B11111111, - B11110000,B11111111,B11001110,B00111110,B00111100,B01111110,B00111100,B01111111,B10111000,B11111111,B11111111, - B11110000,B11111111,B10011110,B00111100,B00111000,B01111100,B00111000,B01111110,B01111000,B11111111,B11111111, - B11100001,B11111111,B00111100,B01111100,B01111000,B01111100,B01111000,B00111100,B11110001,B11111111,B11111111, - B11100001,B11111000,B00111000,B01111000,B01111000,B00010000,B00011000,B00000001,B11110001,B11111111,B11111111, - B00000000,B00000000,B01100000,B00100000,B00111100,B00000000,B01111100,B00000111,B10000000,B01111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111110,B00011111,B11111110,B00011111,B11111111,B11111111,B11111111 -}; diff --git a/config/examples/Creality/Ender-5 Pro/_Statusscreen.h b/config/examples/Creality/Ender-5 Pro/_Statusscreen.h deleted file mode 100755 index 92d5d3cb5f..0000000000 --- a/config/examples/Creality/Ender-5 Pro/_Statusscreen.h +++ /dev/null @@ -1,70 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ - -/** - * Custom Status Screen bitmap - * - * Place this file in the root with your configuration files - * and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h. - * - * Use the Marlin Bitmap Converter to make your own: - * http://marlinfw.org/tools/u8glib/converter.html - */ - -// -// Status Screen Logo bitmap -// -#define STATUS_LOGO_Y 6 -#define STATUS_LOGO_WIDTH 40 - -const unsigned char status_logo_bmp[] PROGMEM = { - B00011110,B00000000,B10000000,B00000000,B01111000, - B00010000,B00000000,B10000000,B00000000,B01000000, - B00010000,B10100011,B10011001,B01100000,B01110000, - B00011100,B11010100,B10100101,B10000000,B00001000, - B00010000,B10010100,B10111101,B00001111,B00001000, - B00010000,B10010100,B10100001,B00000000,B01001000, - B00011110,B10010011,B10011101,B00000000,B00110000, - B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000011,B10000000,B00000000,B00000000, - B00000000,B00000010,B01000000,B00000000,B00000000, - B00000000,B00000010,B01010110,B01100000,B00000000, - B00000000,B00000011,B10011000,B10010000,B00000000, - B00000000,B00000010,B00010000,B10010000,B00000000, - B00000000,B00000010,B00010000,B10010000,B00000000, - B00000000,B00000010,B00010000,B01100000,B00000000 -}; - -// -// Use default bitmaps -// -#define STATUS_HOTEND_ANIM -#define STATUS_BED_ANIM -#define STATUS_HEATERS_XSPACE 20 -#if HOTENDS < 2 - #define STATUS_HEATERS_X 48 - #define STATUS_BED_X 73 -#else - #define STATUS_HEATERS_X 40 - #define STATUS_BED_X 81 -#endif diff --git a/config/examples/Creality/Ender-5/Configuration.h b/config/examples/Creality/Ender-5/Configuration.h deleted file mode 100644 index 2b29bb8c9c..0000000000 --- a/config/examples/Creality/Ender-5/Configuration.h +++ /dev/null @@ -1,2230 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(thisiskeithb, Ender-5)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 115200 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_MELZI_CREALITY -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Ender-5" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 125 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - // Creality Ender-5 - #define DEFAULT_Kp 21.73 - #define DEFAULT_Ki 1.54 - #define DEFAULT_Kd 76.55 - - // Ultimaker - //#define DEFAULT_Kp 22.2 - //#define DEFAULT_Ki 1.08 - //#define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -//#define USE_XMIN_PLUG -//#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -#define USE_XMAX_PLUG -#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -//#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR true -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR 1 -#define Y_HOME_DIR 1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 220 -#define Y_BED_SIZE 220 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 300 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (20*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 185 -#define PREHEAT_1_TEMP_BED 45 -#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 0 -#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 WESTERN - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Creality/Ender-5/Configuration_adv.h b/config/examples/Creality/Ender-5/Configuration_adv.h deleted file mode 100644 index da405f0bdd..0000000000 --- a/config/examples/Creality/Ender-5/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - #define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z false // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - #define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 650 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 580 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 650 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_24V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Creality/Ender-5/README.md b/config/examples/Creality/Ender-5/README.md deleted file mode 100644 index ef74777b91..0000000000 --- a/config/examples/Creality/Ender-5/README.md +++ /dev/null @@ -1,13 +0,0 @@ -# Creality Ender-5 Leadscrew Changes - -In mid-to-late 2019, Creality upgraded the base Ender-5 leadscrew to the same one used on the Ender-5 Pro which prevents the bed from dropping once power is cut. - -If your machine shipped with the upgraded leadscrew (or if your prints are 1/2 as tall as they should be), change your Z steps from `400` to `800` in `Configuration.h`: - -Before: -`DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 }` - -After: -`DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 800, 93 }` - -Or by sending `M92 Z800` followed by `M500` after updating your firmware. diff --git a/config/examples/Creality/Ender-5/_Bootscreen.h b/config/examples/Creality/Ender-5/_Bootscreen.h deleted file mode 100644 index 52119ce6be..0000000000 --- a/config/examples/Creality/Ender-5/_Bootscreen.h +++ /dev/null @@ -1,96 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ - -/** - * Custom Boot Screen bitmap - * - * Place this file in the root with your configuration files - * and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h. - * - * Use the Marlin Bitmap Converter to make your own: - * http://marlinfw.org/tools/u8glib/converter.html - */ - -#define CUSTOM_BOOTSCREEN_TIMEOUT 1000 -#define CUSTOM_BOOTSCREEN_BMPWIDTH 81 -#define CUSTOM_BOOTSCREEN_INVERTED - -const unsigned char custom_start_bmp[] PROGMEM = { - B11111111,B11111111,B11111111,B11111111,B11101111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11101111,B11101111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11100111,B11011111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11100111,B11011111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11100011,B11011111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11110011,B11001111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11100001,B11100001,B11001111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111110,B01111000,B00000000,B00000000,B00000011,B11011101,B11111111,B11111111,B11111111,B11111111, - B11111110,B11111111,B10000000,B01111110,B00000000,B00000001,B11101110,B11111111,B11111111,B11111111,B11111111, - B11111110,B01111101,B11001111,B11111100,B00000000,B00000000,B11110111,B01111111,B11111111,B11111111,B11111111, - B11111111,B10001110,B00000110,B00000000,B00000000,B00000000,B01111011,B10111111,B11111111,B11111111,B11111111, - B11111111,B11000000,B00000000,B00000000,B00000000,B00000000,B01111101,B11011111,B11111111,B11111111,B11111111, - B11111111,B11111100,B00000001,B11111110,B00000000,B00000000,B00111110,B11100111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111100,B00000000,B00000011,B00011111,B01110011,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111000,B00000000,B00000001,B10001111,B10000001,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11100000,B00000000,B00000000,B10000011,B11111001,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B00000000,B11111100,B00000000,B00000000,B11110000,B11111111,B11111111,B11111111, - B11111111,B11111111,B11100000,B00001111,B11111111,B11000000,B00000000,B00000000,B11111111,B11111111,B11111111, - B11111111,B11111110,B00000011,B11111111,B11111111,B11000000,B00000000,B00000000,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111001,B00000000,B00000000,B00000000,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111100,B00000000,B00000111,B11000000,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B00000000,B00000111,B11100000,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11100000,B00000111,B11110001,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111100,B00000111,B11111001,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B00000011,B11111001,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B10000011,B11111001,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11000011,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11100001,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11110000,B10111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111011,B11111000,B00111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111001,B11111000,B00111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B01111110,B11110000,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B10001110,B00000011,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11100000,B00011111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B01111111,B11111111,B11111111,B11111111, - B11111111,B00000000,B00000000,B01111111,B11111111,B11111111,B11111000,B01111111,B11111111,B11111111,B11111111, - B11111111,B10000000,B00000000,B01111111,B11111111,B11111111,B11100000,B01111111,B11111111,B11111111,B11111111, - B11111111,B11000011,B11111100,B11111111,B11111111,B11111111,B11111000,B11111111,B11111111,B11111111,B11111111, - B11111111,B11000011,B11111100,B11111111,B11111111,B11111111,B11111000,B11111111,B11111111,B11111111,B11111111, - B11111111,B10000111,B11111101,B11111111,B11111111,B11111111,B11110001,B11111111,B11111111,B11111111,B11111111, - B11111111,B10000111,B11111111,B11111111,B11111111,B11111111,B11110001,B11111111,B11111111,B11111111,B11111111, - B11111111,B00001111,B11100111,B11110011,B00001111,B11111100,B00100011,B11111100,B00111111,B11111111,B11111111, - B11111111,B00001111,B11101111,B10000000,B00000111,B11110000,B00000011,B11110000,B00011110,B00000000,B01111111, - B11111110,B00011111,B11001111,B10000001,B10000111,B11000111,B10000111,B11000111,B00001100,B00000000,B01111111, - B11111110,B00000000,B00011111,B11000111,B11000111,B10001111,B11000111,B10011111,B00001111,B00001100,B11111111, - B11111110,B00000000,B00011111,B10000111,B10001111,B00011111,B10001111,B00011111,B00001111,B00011111,B11111111, - B11111100,B00111111,B10011111,B10001111,B10001111,B00011111,B10001110,B00000000,B00011110,B00111111,B11111111, - B11111100,B01111111,B00111111,B00001111,B00011110,B00111111,B00011110,B00111111,B11111110,B00111111,B11111111, - B11111000,B01111111,B11111111,B00011111,B00011100,B00111111,B00011100,B01111111,B11111100,B01111111,B11111111, - B11111000,B11111111,B11111111,B00011110,B00011100,B01111110,B00011100,B01111111,B11111100,B01111111,B11111111, - B11110000,B11111111,B11001110,B00111110,B00111100,B01111110,B00111100,B01111111,B10111000,B11111111,B11111111, - B11110000,B11111111,B10011110,B00111100,B00111000,B01111100,B00111000,B01111110,B01111000,B11111111,B11111111, - B11100001,B11111111,B00111100,B01111100,B01111000,B01111100,B01111000,B00111100,B11110001,B11111111,B11111111, - B11100001,B11111000,B00111000,B01111000,B01111000,B00010000,B00011000,B00000001,B11110001,B11111111,B11111111, - B00000000,B00000000,B01100000,B00100000,B00111100,B00000000,B01111100,B00000111,B10000000,B01111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111110,B00011111,B11111110,B00011111,B11111111,B11111111,B11111111 -}; diff --git a/config/examples/Creality/Ender-5/_Statusscreen.h b/config/examples/Creality/Ender-5/_Statusscreen.h deleted file mode 100755 index 3da18ade4b..0000000000 --- a/config/examples/Creality/Ender-5/_Statusscreen.h +++ /dev/null @@ -1,61 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ - -/** - * Custom Status Screen bitmap - * - * Place this file in the root with your configuration files - * and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h. - * - * Use the Marlin Bitmap Converter to make your own: - * http://marlinfw.org/tools/u8glib/converter.html - */ - -// -// Status Screen Logo bitmap -// -#define STATUS_LOGO_Y 8 -#define STATUS_LOGO_WIDTH 37 - -const unsigned char status_logo_bmp[] PROGMEM = { - B11111000,B00000001,B10000000,B00000000,B01111000, - B01001000,B00000000,B10000000,B00000000,B01000000, - B01000011,B11000011,B10001100,B11010000,B01110000, - B01110001,B00100100,B10010010,B01100111,B00001000, - B01000001,B00100100,B10011110,B01000000,B00001000, - B01001001,B00100100,B10010000,B01000000,B01001000, - B11111011,B10110011,B11001110,B11100000,B00110000 -}; - -// -// Use default bitmaps -// -#define STATUS_HOTEND_ANIM -#define STATUS_BED_ANIM -#define STATUS_HEATERS_XSPACE 20 -#if HOTENDS < 2 - #define STATUS_HEATERS_X 48 - #define STATUS_BED_X 73 -#else - #define STATUS_HEATERS_X 40 - #define STATUS_BED_X 81 -#endif diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration.h b/config/examples/Dagoma/Disco Ultimate/Configuration.h deleted file mode 100644 index b77f83fa62..0000000000 --- a/config/examples/Dagoma/Disco Ultimate/Configuration.h +++ /dev/null @@ -1,2226 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "InsanityAutomation" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_DAGOMA -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "DiscoUltimate" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 18 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 0 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 15 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 3 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 4 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 3 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - #define DEFAULT_Kp 32.48 - #define DEFAULT_Ki 6.4 - #define DEFAULT_Kd 41.25 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 950 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -//#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -#define X_DRIVER_TYPE A5984 -#define Y_DRIVER_TYPE A5984 -#define Z_DRIVER_TYPE A5984 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A5984 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 160, 160, 1600, 196 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 500, 500, 4, 170 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 3000, 1000, 20, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 20 - #define DEFAULT_YJERK 20 - #define DEFAULT_ZJERK 0.4 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.053 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 0, 21, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 10 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR false -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR 1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 205 -#define Y_BED_SIZE 205 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING true // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - //#define SEGMENT_LEVELED_MOVES - //#define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - #define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - #define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - #define UBL_Z_RAISE_WHEN_OFF_MESH 0.0 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - #define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MAX_POS + 10), (Y_MAX_POS - 10), 5 } - #define NOZZLE_PARK_XY_FEEDRATE 195 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h deleted file mode 100644 index f8db8a46d3..0000000000 --- a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - #define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - #define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 75 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 160 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - #define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - #define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - #define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - #define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 950 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - #define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - #define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - #define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration.h b/config/examples/EXP3D/Imprimante multifonction/Configuration.h deleted file mode 100644 index 45651b5e19..0000000000 --- a/config/examples/EXP3D/Imprimante multifonction/Configuration.h +++ /dev/null @@ -1,2226 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(Vertabreaker)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_13_EEB -#endif - -// Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -#define MACHINE_UUID "00000000-1337-1337-1337-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 5 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 5 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 0 -#define HEATER_1_MINTEMP 0 -#define HEATER_2_MINTEMP 0 -#define HEATER_3_MINTEMP 0 -#define HEATER_4_MINTEMP 0 -#define HEATER_5_MINTEMP 0 -#define BED_MINTEMP 0 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - #define DEFAULT_Kp 11.21//36.59//9.29//8.34//22.2 - #define DEFAULT_Ki 0.44//3.02//0.6//0.34//1.08 - #define DEFAULT_Kd 71.37//110.92//68.17//51.75//114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 150//10.00 - #define DEFAULT_bedKi 1.41//.023 - #define DEFAULT_bedKd 1675.16//305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 100 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 1000 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -#define USE_XMAX_PLUG -#define USE_YMAX_PLUG -#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 800, 140 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 8.0 - #define DEFAULT_YJERK 8.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.01 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 0 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED HOMING_FEEDRATE_XY - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW HOMING_FEEDRATE_Z - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 4 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 4 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 4 // Z Clearance between multiple probes -#define Z_AFTER_PROBING 4 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 0 - -// Enable the M48 repeatability test to test probe accuracy -#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR false -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR true -#define INVERT_E2_DIR true -#define INVERT_E3_DIR true -#define INVERT_E4_DIR true -#define INVERT_E5_DIR true - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR 1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 300 -#define Y_BED_SIZE 210 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 185 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 2 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - #define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 0 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (40*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - //#define XY_DIAG_AC 282.8427124746 - //#define XY_DIAG_BD 282.8427124746 - //#define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - //#define XZ_DIAG_AC 282.8427124746 - //#define XZ_DIAG_BD 282.8427124746 - //#define YZ_DIAG_AC 282.8427124746 - //#define YZ_DIAG_BD 282.8427124746 - //#define YZ_SIDE_AD 200 - //#define XZ_SKEW_FACTOR 0.0 - //#define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 200 -#define PREHEAT_1_TEMP_BED 60 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 250 -#define PREHEAT_2_TEMP_BED 70 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 0), (Y_MIN_POS + 0), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 50 -#define LCD_FEEDBACK_FREQUENCY_HZ 10 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300, 300, 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h deleted file mode 100644 index 05a7371ab5..0000000000 --- a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h +++ /dev/null @@ -1,2927 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 5 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 60 // Seconds - #define WATCH_TEMP_INCREASE 5 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 5 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 5 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 5 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - #define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - #define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 10 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -#define MILLISECONDS_PREHEAT_TIME 30000 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 4 -#define Y_HOME_BUMP_MM 4 -#define Z_HOME_BUMP_MM 4 -#define HOMING_BUMP_DIVISOR { 4, 4, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 600 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 60000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - #define BACKLASH_SMOOTHING_MM 10 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - #define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 2*60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 40 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - #define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - #define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -#define LCD_TIMEOUT_TO_STATUS 60000 - -// Add an 'M73' G-code to set the current percentage -#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - #define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - #define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - #define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - #define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 0 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 5000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - #define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - #define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - #define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - //#define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - //#define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - //#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - //#define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - #define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 2000 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - #define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - #define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - #define PROBE_PT_1_X 15 - #define PROBE_PT_1_Y 180 - #define PROBE_PT_2_X 15 - #define PROBE_PT_2_Y 20 - #define PROBE_PT_3_X 170 - #define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - #define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - #define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - #define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - #define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - #define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - #define CUSTOM_USER_MENU_TITLE "Lin Adv Presets" - #define USER_SCRIPT_DONE "M117 Set & Saved" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - #define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "K0 Off" - #define USER_GCODE_1 "M900 K0\nM500" - - #define USER_DESC_2 "K0.2" - #define USER_GCODE_2 "M900 K0.2\nM500" - - #define USER_DESC_3 "K0.3" - #define USER_GCODE_3 "M900 K0.3\nM500" - - #define USER_DESC_4 "K0.4" - #define USER_GCODE_4 "M900 K0.4\nM500" - - #define USER_DESC_5 "K0.5" - #define USER_GCODE_5 "M900 K0.5\nM500" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - #define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Einstart-S/Configuration.h b/config/examples/Einstart-S/Configuration.h deleted file mode 100644 index 94b5750491..0000000000 --- a/config/examples/Einstart-S/Configuration.h +++ /dev/null @@ -1,2236 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "elsie tech corp" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_EINSTART_S -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "The Shining" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 666 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 0 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Einstart S - // Autotune M303 S180 C8 - #define DEFAULT_Kp 15.31 - #define DEFAULT_Ki 0.93 - #define DEFAULT_Kd 63.03 - - // Ultimaker - //#define DEFAULT_Kp 22.2 - //#define DEFAULT_Ki 1.08 - //#define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -//#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -//#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -//#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -//#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -//#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -#define X_STOP_INVERTING true -#define Y_STOP_INVERTING true -#define Z_STOP_INVERTING true - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 80, 96.337120 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 2000, 2000, 100, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 2000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 2000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 1 -#define Y_ENABLE_ON 1 -#define Z_ENABLE_ON 1 -#define E_ENABLE_ON 1 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR false -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR 1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 160 -#define Y_BED_SIZE 160 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 165 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Einstart-S/Configuration_adv.h b/config/examples/Einstart-S/Configuration_adv.h deleted file mode 100644 index 5e231153c7..0000000000 --- a/config/examples/Einstart-S/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -//#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Einstart-S/readme.md b/config/examples/Einstart-S/readme.md deleted file mode 100644 index f6da66f9cd..0000000000 --- a/config/examples/Einstart-S/readme.md +++ /dev/null @@ -1,152 +0,0 @@ -## Einstart S Machine Notes - -The Einstart S is a commercial machine that ships with a proprietary firmware and "licensed" slicer program which requires the original SD card or license file (.lic/.reg) from support in order to function. The impetus for the port was that I acquired the machine on the weekend when tech support was closed. - -## Specifications: - - - Powder coated, formed steel enclosure - - Machined Aluminum internal axis support frame - - Genuine matched HIWIN rails on all axis - - Genuine Minebea NEMA17 motors (200 steps/rev) - - THC7128 3A Stepper Drivers (configured for 16 microsteps, loud) - - 160x160 magnetically coupled non-heated bed - - PLA-only, Direct Drive extruder - - SH1106 OLED Display w/ Cardinal navigation - - 9533 I2C PWM RGB LED Chassis illumination - - Onboard SD-Card Support - -## Initial modifications - -### Bootloader/Marlin installation - -This machine probably doesn't ship with the arduino boot loader, so unless you reflow a 2560 on there to replace the atmega1280 like I did (to preserve the original firmware), you'll need to use ISP to do an initial firmware load and/or bootloader flash! - -It's not that bad though, you can just buy an ISP programmer with the appropriate header, or build an ISP programmer using the Arduino ISP sketch (wiring is easier if you use the "old style wiring" which utilizes the following pinout: (see the comments in the ArduinoISP sketch). - -I used an arduino Nano and a header I had lying around, but you could do the same with a nano and some dupont headers cut and soldered to the board, and taped/glued into a header. - -Triple check your pinouts, it shouldn't fry if connected backwards but if your pinout is wrong you're going to struggle for sure. - -#### ArduinoISP Sketch pinout for 10pin ISP header using "old style wiring": - -See the comments in the ArduinoISP sketch under File:Examples:ArduinoISP - -1 MOSI D11 -2 5v Vcc -3 N/C -4 GND -5 RES D10 -6 N/C -7 SCK D13 -8 N/C -9 MISO D12 -10 GND GND - -#### Einstart Motherboard ISP Header Pinout - -The 10 pin ISP Header is located to the right of the ATMEGA chip, just above the long LCD header. - -#### ISP Diagram - -<--- Face of chassis - -MOSI ( 1 ) ( 2 ) Vcc - N/C ( 3 ) ( 4 ) GND - RST ( 5 ) ( 6 ) GND - SCK ( 7 ) ( 8 ) GND -MISO ( 9 ) (10 ) GND - -Component Plugs ---> - -### Motherboard Diagram - - |1234|1234|1234|1234|12|12|12|12|12|12|12|12|12|12|123|12|1234| - --------------------------------------------------------------- -| XMOT YMOT ZMOT EMOT EF HB HE PF ZS YS XS PS BT ET PT1 TC VBRG | -| ===== ====== [DC| -|====== ====== ____ ISP IC1__ ___| -| |1280| ::::: | | |USB| -| |____| 1 |__| |___| -| BUTTON |SD | -| GDLRUO LCD |___| -|________________________[......][....................]_________| - -Legend: - -XMOT X-Motor -YMOT Y-Motor -ZMOT Z-Motor -EMOT E-Motor -EF Extruder Fan -HB Heated Bed (PWM) -HE Hot End (PWM) -PF Part Fan (PWM) -ZS Z-Endstop (Max) -YS Y-Endstop (Min) -XS X-Endstop (Min) -PS SPST Switch to enable DC 24v -BT Bed Thermistor (header not populated) -ET Extruder Thermistor -PT1 Pt100 Thermocouple (not populated) -TC Thermocouple (not populated) -VBRG LED Output from PCA5933 -BUTTONS -G GND (buttons are pulled low on activation) -D DOWN -L LEFT -R RIGHT -U UP -O OK (MIDDLE) - -## Uploading Marlin firmware to a stock Einstart S - -### Summary: - -Make, buy or steal a 10 pin ISP programmer and select the appropriate programmer option via Tools:Programmer in Arduino IDE, use the Sketch:Upload Using Programmer command or Shift-Ctrl-U (vs Ctrl-U to upload via serial). - -### Detailed procedure: - -You can either load Marlin directly via ISP programmer (easiest, but requires opening the chassis every time you want to change/update firmware) or, just program the bootloader which will enable later uploads via USB. HOWEVER, to actually upload the sketch you will need one of the following: - - - ISP programming header (ArduinoISP sketch, pinout below) - - OR - - Install bootloader on atmega1280 to enable native USB uploads (also requires ISP). - - AND - - Connect button between RESET and GND on ISP header, release post compile just before upload starts. - - OR - - Install permanent modification described below, requires no button press during upload. - -### Permanent modification to enable USB uploads via Arduino IDE - -As a permanent modification to enable direct USB upload from the arduino IDE, you would need to flash the boot loader using ISP first; but then you can solder a wire or 100n capacaitor between the DTR line on the FTDI to the reset line, which is conveniently located in several places on the board. - -#### FTDI Chip Diagram (IC1) - - ______ - TXD --|1 28|--OSCO - DTR --|2 27|--OSCI - RTS --|3 26|--TEST - VCCIO--|4 25|--AGND - RXD --|5 24|--N/C - RI --|6 23|--CBUS0 - GND --|7 22|--CBUS1 - N/C --|8 21|--GND - DSR --|9 20|--Vcc - DCD --|10 19|--RES - CTS --|11 18|--GND - CBUS4--|12 17|--3V3 - CBUS2--|13 16|--USBDM - CBUS3--|14 15|--USBDP - |______| - -#### Arduino Reset Circuit - - DTR-----||----GND----/\/\/\/----Vcc - 100nf 10k - -With this modification you no longer need the reset button and you can program directly from the Arduino IDE. - -### Power notes during flashing. - -You do NOT need power connected when flashing via ISP. -You DO need power when flashing via USB Serial but you MUST time the release of the reset line to allow the upload unless you've performed the permanent modification. diff --git a/config/examples/FYSETC/AIO_II/Configuration.h b/config/examples/FYSETC/AIO_II/Configuration.h deleted file mode 100644 index 47c9cf8cc0..0000000000 --- a/config/examples/FYSETC/AIO_II/Configuration.h +++ /dev/null @@ -1,2231 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 1 // libmaple 0 for USB ,1 for serial - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 115200 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_FYSETC_AIO_II -#endif - -// Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Makerlab J-head - #define DEFAULT_Kp 21.73 - #define DEFAULT_Ki 1.54 - #define DEFAULT_Kd 76.55 - - // Ultimaker - //#define DEFAULT_Kp 22.2 - //#define DEFAULT_Ki 1.08 - //#define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 640, 640, 3200, 800 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 1 -#define Y_ENABLE_ON 1 -#define Z_ENABLE_ON 1 -#define E_ENABLE_ON 1 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 235 -#define Y_BED_SIZE 235 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 260 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - #define RGB_LED_R_PIN PB0 - #define RGB_LED_G_PIN PB6 - #define RGB_LED_B_PIN PB7 - #define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/FYSETC/AIO_II/Configuration_adv.h b/config/examples/FYSETC/AIO_II/Configuration_adv.h deleted file mode 100644 index d422a4aaa8..0000000000 --- a/config/examples/FYSETC/AIO_II/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 120 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - #define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - #define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES true // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -//#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 700 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 650 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 650 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - #define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration.h b/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration.h deleted file mode 100644 index d9f7d4a7f0..0000000000 --- a/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration.h +++ /dev/null @@ -1,2231 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 1 // libmaple 0 for USB ,1 for serial - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 115200 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_FYSETC_CHEETAH_V12 -#endif - -// Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - //PID for Makerlab J-head - #define DEFAULT_Kp 21.73 - #define DEFAULT_Ki 1.54 - #define DEFAULT_Kd 76.55 - - // Ultimaker - //#define DEFAULT_Kp 22.2 - //#define DEFAULT_Ki 1.08 - //#define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -#define X_DRIVER_TYPE TMC2208 -#define Y_DRIVER_TYPE TMC2208 -#define Z_DRIVER_TYPE TMC2208 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE TMC2208 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { -44, -6, -3.9 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 10 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 235 -#define Y_BED_SIZE 235 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 260 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h b/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h deleted file mode 100644 index 4c424932c6..0000000000 --- a/config/examples/FYSETC/Cheetah 1.2/BLTouch/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 120 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 100 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - //#define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "M21" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES true // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -//#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 700 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 500 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 650 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 1 - #define Z_SLAVE_ADDRESS 2 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 3 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_24V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - #define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/FYSETC/Cheetah 1.2/base/Configuration.h b/config/examples/FYSETC/Cheetah 1.2/base/Configuration.h deleted file mode 100644 index 4b1e859124..0000000000 --- a/config/examples/FYSETC/Cheetah 1.2/base/Configuration.h +++ /dev/null @@ -1,2231 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 1 // libmaple 0 for USB ,1 for serial - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 115200 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_FYSETC_CHEETAH_V12 -#endif - -// Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - //PID for Makerlab J-head - #define DEFAULT_Kp 21.73 - #define DEFAULT_Ki 1.54 - #define DEFAULT_Kd 76.55 - - // Ultimaker - //#define DEFAULT_Kp 22.2 - //#define DEFAULT_Ki 1.08 - //#define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -#define X_DRIVER_TYPE TMC2208 -#define Y_DRIVER_TYPE TMC2208 -#define Z_DRIVER_TYPE TMC2208 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE TMC2208 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 235 -#define Y_BED_SIZE 235 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 260 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h b/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h deleted file mode 100644 index 4c424932c6..0000000000 --- a/config/examples/FYSETC/Cheetah 1.2/base/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 120 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 100 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - //#define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "M21" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES true // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -//#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 700 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 500 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 650 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 1 - #define Z_SLAVE_ADDRESS 2 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 3 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_24V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - #define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/FYSETC/Cheetah/BLTouch/Configuration.h b/config/examples/FYSETC/Cheetah/BLTouch/Configuration.h deleted file mode 100644 index 5fbb80acee..0000000000 --- a/config/examples/FYSETC/Cheetah/BLTouch/Configuration.h +++ /dev/null @@ -1,2231 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 1 // libmaple 0 for USB ,1 for serial - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 115200 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_FYSETC_CHEETAH -#endif - -// Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - //PID for Makerlab J-head - #define DEFAULT_Kp 21.73 - #define DEFAULT_Ki 1.54 - #define DEFAULT_Kd 76.55 - - // Ultimaker - //#define DEFAULT_Kp 22.2 - //#define DEFAULT_Ki 1.08 - //#define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -#define X_DRIVER_TYPE TMC2209 -#define Y_DRIVER_TYPE TMC2209 -#define Z_DRIVER_TYPE TMC2209 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE TMC2209 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { -44, -6, -3.9 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 10 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 235 -#define Y_BED_SIZE 235 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 260 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h b/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h deleted file mode 100644 index 4c424932c6..0000000000 --- a/config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 120 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 100 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - //#define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "M21" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES true // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -//#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 700 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 500 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 650 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 1 - #define Z_SLAVE_ADDRESS 2 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 3 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_24V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - #define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/FYSETC/Cheetah/base/Configuration.h b/config/examples/FYSETC/Cheetah/base/Configuration.h deleted file mode 100644 index 8e217485f6..0000000000 --- a/config/examples/FYSETC/Cheetah/base/Configuration.h +++ /dev/null @@ -1,2231 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 1 // libmaple 0 for USB ,1 for serial - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 115200 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_FYSETC_CHEETAH -#endif - -// Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - //PID for Makerlab J-head - #define DEFAULT_Kp 21.73 - #define DEFAULT_Ki 1.54 - #define DEFAULT_Kd 76.55 - - // Ultimaker - //#define DEFAULT_Kp 22.2 - //#define DEFAULT_Ki 1.08 - //#define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -#define X_DRIVER_TYPE TMC2209 -#define Y_DRIVER_TYPE TMC2209 -#define Z_DRIVER_TYPE TMC2209 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE TMC2209 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 235 -#define Y_BED_SIZE 235 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 260 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/FYSETC/Cheetah/base/Configuration_adv.h b/config/examples/FYSETC/Cheetah/base/Configuration_adv.h deleted file mode 100644 index 4c424932c6..0000000000 --- a/config/examples/FYSETC/Cheetah/base/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 120 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 100 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - //#define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "M21" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES true // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -//#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 700 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 500 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 650 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 1 - #define Z_SLAVE_ADDRESS 2 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 3 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_24V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - #define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/FYSETC/F6_13/Configuration.h b/config/examples/FYSETC/F6_13/Configuration.h deleted file mode 100644 index 3e06d9df70..0000000000 --- a/config/examples/FYSETC/F6_13/Configuration.h +++ /dev/null @@ -1,2232 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 115200 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - //#define MOTHERBOARD BOARD_RAMPS_14_EFB - //#define MOTHERBOARD BOARD_FYSETC_AIO_II - #define MOTHERBOARD BOARD_FYSETC_F6_13 -#endif - -// Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 0 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - #define DEFAULT_Kp 22.2 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 1280, 1280, 6400, 1600 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 1 -#define Y_ENABLE_ON 1 -#define Z_ENABLE_ON 1 -#define E_ENABLE_ON 1 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR false -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - // fzl:change to below - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - #define RGB_LED_R_PIN -1 // PB0 - #define RGB_LED_G_PIN PB6 - #define RGB_LED_B_PIN PB7 - #define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/FYSETC/F6_13/Configuration_adv.h b/config/examples/FYSETC/F6_13/Configuration_adv.h deleted file mode 100644 index 2ff75b6e9b..0000000000 --- a/config/examples/FYSETC/F6_13/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 120 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 100 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - //#define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - #define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -//#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 4 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 0 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/FYSETC/S6/Configuration.h b/config/examples/FYSETC/S6/Configuration.h deleted file mode 100644 index beb9a8a300..0000000000 --- a/config/examples/FYSETC/S6/Configuration.h +++ /dev/null @@ -1,2226 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT -1 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 115200 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_FYSETC_S6 -#endif - -// Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 0 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - #define DEFAULT_Kp 22.2 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 400 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/FYSETC/S6/Configuration_adv.h b/config/examples/FYSETC/S6/Configuration_adv.h deleted file mode 100644 index 4685198fc2..0000000000 --- a/config/examples/FYSETC/S6/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -//#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Felix/DUAL/Configuration.h b/config/examples/Felix/DUAL/Configuration.h deleted file mode 100644 index 8e43970b49..0000000000 --- a/config/examples/Felix/DUAL/Configuration.h +++ /dev/null @@ -1,2208 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, Felix/DUAL)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_FELIX2 -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Felix Dual" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 2 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - #define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 1 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 15 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // Felix 2.0+ electronics with v4 Hotend - #define DEFAULT_Kp 12 - #define DEFAULT_Ki 0.84 - #define DEFAULT_Kd 85 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - // Felix Foil Heater - #define DEFAULT_bedKp 103.37 - #define DEFAULT_bedKi 2.79 - #define DEFAULT_bedKd 956.94 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -// default steps per unit for Felix 2.0/3.0: 0.00249mm x/y rounding error with 3mm pitch HTD belt and 14 tooth pulleys. 0 Z error. -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 76.190476, 76.190476, 1600, 164 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 5000, 5000, 100, 80000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 1750 // X, Y, Z and E max acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 5000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.023 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR true -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR true -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 255 -#define Y_BED_SIZE 205 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 235 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 100 -#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -//#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Felix/DUAL/Configuration_adv.h b/config/examples/Felix/DUAL/Configuration_adv.h deleted file mode 100644 index 96b40e3df7..0000000000 --- a/config/examples/Felix/DUAL/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 3 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 60 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -//#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - //#define USER_DESC_5 "Home & Info" - //#define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Felix/DUAL/README.md b/config/examples/Felix/DUAL/README.md deleted file mode 100644 index 48fe099151..0000000000 --- a/config/examples/Felix/DUAL/README.md +++ /dev/null @@ -1,60 +0,0 @@ -# Felix 2.0/3.0 Configuration for Marlin Firmware - -Bringing silky smooth prints to Felix. - -## Build HOWTO - - - Install the latest non-beta Arduino software IDE/toolset: http://www.arduino.cc/en/Main/Software - - Download the Marlin firmware - - [Latest developement version](https://github.com/MarlinFirmware/Marlin/tree/Development) - - [Stable version](https://github.com/MarlinFirmware/Marlin/tree/Development) - - In both cases use the "Download Zip" button on the right. - -``` -cd Marlin/src -cp config/examples/Felix/Configuration_adv.h . -``` - -The next step depends on your setup: - -### Single Extruder Configuration - - cp config/examples/Felix/Configuration.h . - -### Dual Extruder Configuration - - cp config/examples/Felix/DUAL/Configuration.h Configuration.h - -### Compile Firmware - - - Start the Arduino IDE. - - Select Tools -> Board -> Arduino Mega 2560 - - Select the correct serial port in Tools -> Serial Port (usually /dev/ttyUSB0) - - Open Marlin.pde or .ino - - Click the Verify/Compile button - -### Flash Firmware - -#### Connected directly via USB - - - Click the Upload button. If all goes well the firmware is uploading - -#### Remote update - -Find the latest Arduino build: - - ls -altr /tmp/ - drwxr-xr-x 5 chrono users 12288 Mar 3 21:41 build6072035599686630843.tmp - -Copy the firmware to your printer host: - - scp /tmp/build6072035599686630843.tmp/Marlin.cpp.hex a.b.c.d:/tmp/ - -Connect to your printer host via ssh, stop Octoprint or any other service that may block your USB device and make sure you have avrdude installed, then run: - - avrdude -C/etc/avrdude.conf -v -v -v -patmega2560 -cwiring -P/dev/ttyUSB0 \ - -b115200 -D -Uflash:w:/tmp/Marlin.cpp.hex:i - -## Acknowledgements - -Mashed together and tested on https://apollo.open-resource.org/mission:resources:picoprint based on collaborative teamwork of @andrewsil1 and @thinkyhead. diff --git a/config/examples/Felix/Single/Configuration.h b/config/examples/Felix/Single/Configuration.h deleted file mode 100644 index e7cae9ac5e..0000000000 --- a/config/examples/Felix/Single/Configuration.h +++ /dev/null @@ -1,2208 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, Felix)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_FELIX2 -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Felix" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - #define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 15 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // Felix 2.0+ electronics with v4 Hotend - #define DEFAULT_Kp 12 - #define DEFAULT_Ki 0.84 - #define DEFAULT_Kd 85 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - // Felix Foil Heater - #define DEFAULT_bedKp 103.37 - #define DEFAULT_bedKi 2.79 - #define DEFAULT_bedKd 956.94 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -// default steps per unit for Felix 2.0/3.0: 0.00249mm x/y rounding error with 3mm pitch HTD belt and 14 tooth pulleys. 0 Z error. -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 76.190476, 76.190476, 1600, 164 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 5000, 5000, 100, 80000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 1750 // X, Y, Z and E max acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 5000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.023 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR true -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 255 -#define Y_BED_SIZE 205 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 235 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 100 -#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -//#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Felix/Single/Configuration_adv.h b/config/examples/Felix/Single/Configuration_adv.h deleted file mode 100644 index 96b40e3df7..0000000000 --- a/config/examples/Felix/Single/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 3 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 60 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -//#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - //#define USER_DESC_5 "Home & Info" - //#define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Felix/Single/README.md b/config/examples/Felix/Single/README.md deleted file mode 100644 index 48fe099151..0000000000 --- a/config/examples/Felix/Single/README.md +++ /dev/null @@ -1,60 +0,0 @@ -# Felix 2.0/3.0 Configuration for Marlin Firmware - -Bringing silky smooth prints to Felix. - -## Build HOWTO - - - Install the latest non-beta Arduino software IDE/toolset: http://www.arduino.cc/en/Main/Software - - Download the Marlin firmware - - [Latest developement version](https://github.com/MarlinFirmware/Marlin/tree/Development) - - [Stable version](https://github.com/MarlinFirmware/Marlin/tree/Development) - - In both cases use the "Download Zip" button on the right. - -``` -cd Marlin/src -cp config/examples/Felix/Configuration_adv.h . -``` - -The next step depends on your setup: - -### Single Extruder Configuration - - cp config/examples/Felix/Configuration.h . - -### Dual Extruder Configuration - - cp config/examples/Felix/DUAL/Configuration.h Configuration.h - -### Compile Firmware - - - Start the Arduino IDE. - - Select Tools -> Board -> Arduino Mega 2560 - - Select the correct serial port in Tools -> Serial Port (usually /dev/ttyUSB0) - - Open Marlin.pde or .ino - - Click the Verify/Compile button - -### Flash Firmware - -#### Connected directly via USB - - - Click the Upload button. If all goes well the firmware is uploading - -#### Remote update - -Find the latest Arduino build: - - ls -altr /tmp/ - drwxr-xr-x 5 chrono users 12288 Mar 3 21:41 build6072035599686630843.tmp - -Copy the firmware to your printer host: - - scp /tmp/build6072035599686630843.tmp/Marlin.cpp.hex a.b.c.d:/tmp/ - -Connect to your printer host via ssh, stop Octoprint or any other service that may block your USB device and make sure you have avrdude installed, then run: - - avrdude -C/etc/avrdude.conf -v -v -v -patmega2560 -cwiring -P/dev/ttyUSB0 \ - -b115200 -D -Uflash:w:/tmp/Marlin.cpp.hex:i - -## Acknowledgements - -Mashed together and tested on https://apollo.open-resource.org/mission:resources:picoprint based on collaborative teamwork of @andrewsil1 and @thinkyhead. diff --git a/config/examples/FlashForge/CreatorPro/Configuration.h b/config/examples/FlashForge/CreatorPro/Configuration.h deleted file mode 100644 index 70f9cacd15..0000000000 --- a/config/examples/FlashForge/CreatorPro/Configuration.h +++ /dev/null @@ -1,2219 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "M. Baker" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_MIGHTYBOARD_REVE -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "CreatorPro" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 2 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, -34.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 0.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 -2 -#define TEMP_SENSOR_1 -2 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 0 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 15 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - -#define DEFAULT_Kp 20.03 -#define DEFAULT_Ki 1.22 -#define DEFAULT_Kd 82.05 - - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -//#define USE_XMIN_PLUG -//#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -#define USE_XMAX_PLUG -#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -//really Sailfish... got enough precision on that float for an 8 bit system? -//I'm leaving this in for posterior's sake -#define DEFAULT_AXIS_STEPS_PER_UNIT { 94.139704, 94.139704, 400, 96.275201870333662468889989185642 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 250, 250, 20, 100 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 1000, 1000, 100, 5000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 250 // X, Y, Z and E max acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 5000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) -#define DEFAULT_XJERK 20.0 -#define DEFAULT_YJERK 20.0 -#define DEFAULT_ZJERK 0.4 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 2.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.64 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR true -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR 1 -#define Y_HOME_DIR 1 -#define Z_HOME_DIR -1 - -// @section machine - - -//these values are used in your slicer -#define X_BED_SIZE 227 -#define Y_BED_SIZE 148 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS -115 -#define Y_MIN_POS -84 -#define Z_MIN_POS 0 -#define X_MAX_POS 152 -#define Y_MAX_POS 77 -#define Z_MAX_POS 150 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 200 -#define PREHEAT_1_TEMP_BED 50 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 220 -#define PREHEAT_2_TEMP_BED 100 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MAX_POS - 2), (Y_MAX_POS - 2), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/config/examples/FlashForge/CreatorPro/Configuration_adv.h deleted file mode 100644 index c32ede7a9b..0000000000 --- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h +++ /dev/null @@ -1,2930 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN EX1_FAN_PIN -#define E1_AUTO_FAN_PIN EX2_FAN_PIN -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z false // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2F // unshifted slave address for first DIGIPOT - //#define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 5 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 -// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS -#define DIGIPOT_I2C_MOTOR_CURRENTS { 0.84, 0.84, 0.4, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - //#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - #define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 255 // User defined GREEN value - #define LED_USER_PRESET_BLUE 255 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - #define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G27" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -//#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 0 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 80 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 80 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/FlashForge/CreatorPro/CuraSettings.txt b/config/examples/FlashForge/CreatorPro/CuraSettings.txt deleted file mode 100644 index d45af2b721..0000000000 --- a/config/examples/FlashForge/CreatorPro/CuraSettings.txt +++ /dev/null @@ -1,157 +0,0 @@ -NOTE ON FLASHING THE FIRMWARE: - -The firmware for the Atmel chip used for USB on the Mighty Board is the same as the Arduino Mega's, but it doesn't do an automatic reset. If you want the printer to reset on DTR you will need to flash it with the firmware for the Arduino Mega. - -### Use with all nozzle settings - -Build plate shape: Rectangular - [X] Origin at center - [X] Heated bed -G-code flavor: Marlin - -### Right Nozzle - -Number of Extruders: 1 - -X (Width) 227 -Y (Depth) 148 -Z (Heigth) 150 - -Extruder 1 - - Nozzle size: 0.4 - Compatible material diameter: 1.75 - Nozzle offset X: 0 - Nozzle offset Y: 0 - Cooling Fan Number:0 - -;START G-CODE; -M104 T0 S{material_print_temperature} -M140 S{material_bed_temperature} -G28 -T0 -G1 X150 Y-70 Z30 F4800 ; move to wait position left hand side of the table -M190 S{material_bed_temperature} -M109 T0 S{material_print_temperature} -G92 E0 -G1 Z0.4 F1800 -G1 X110 Y-70 E20 F300 ; purge nozzle -G1 X120 Y-70 Z0.15 F1200 ; slow wipe -G1 X110 Y-70 Z0.5 F1200 ; lift -G92 E0 -;START G-CODE; - -;END G-CODE; -G1 X150 Y75 Z150 F1000 ; send Z axis to bottom of machine -M140 S0; cool down HBP -M104 T0 S0 ; cool down right extruder -M104 T1 S0 ; cool down left extruder -M127 ; stop blower fan -M18 ; disable stepper -;END G-CODE; - -***Left Nozzle*** -Number of Extruders: 1 -X (Width) 227 -Y (Depth) 148 -Z (Heigth) 150 - -Extruder 1 - - Nozzle size: 0.4 - Compatible material diameter: 1.75 - Nozzle offset X: -34 - Nozzle offset Y: 0 - Cooling Fan Number:0 - -;START G-CODE; -M104 S{material_print_temperature} -M140 S{material_bed_temperature} -G28 -T1 -G1 X-110 Y-70 Z30 F4800 ; move to wait position left hand side of the table -M104 S{material_print_temperature} -M190 S{material_bed_temperature} -M109 S{material_print_temperature} -G92 E0 -G1 Z0.4 F1800 -G1 E10 F300 ; purge nozzle -G1 X-67 Y-70 E25 F300 ; purge nozzle -G1 X-77 Y-70 Z0.15 F1200 ; slow wipe -G1 X-67 Y-70 Z0.5 F1200 ; lift -G92 E0 -;START G-CODE; - -;END G-CODE; -G1 X150 Y75 Z150 F1000 ; send Z axis to bottom of machine -M140 S0; cool down HBP -M104 T0 S0 ; cool down right extruder -M104 T1 S0 ; cool down left extruder -M127 ; stop blower fan -M18 ; disable stepper -;END G-CODE; - -***Both Nozzles*** -Number of Extruders: 2 -X (Width) 295 <---- bed width + 2 x nozzle offset -Y (Depth) 148 -Z (Heigth) 150 - -Extruder 1 - - Nozzle size: 0.4 - Compatible material diameter: 1.75 - Nozzle offset X: 0 - Nozzle offset Y: 0 - Cooling Fan Number:0 - ;Extruder End G-code; - G1 X150 Y70 F9000;move away from print in case extrusion cool down speed modifier too low - ;Extruder End G-code; - -Extruder 2 - - Nozzle size: 0.4 - Compatible material diameter: 1.75 - Nozzle offset X: -34 - Nozzle offset Y: 0 - Cooling Fan Number:0 - ;Extruder End G-code; - G1 X150 Y70 F9000;move away from print in case extrusion cool down speed modifier too low - ;Extruder End G-code; - -;START G-CODE; -M104 T0 S{material_print_temperature, 0} -M104 T1 S{material_print_temperature, 1} -M140 S{material_bed_temperature} -G28 -;purge right -T0 -G1 X155 Y-70 Z30 F4800 -M190 S{material_bed_temperature} -M109 T0 S{material_print_temperature, 0} -M104 T0 S{material_standby_temperature, 0} -G92 E0 -G1 Z0.4 F1800 -G1 X110 Y-70 E20 F300 ; purge nozzle -G1 X120 Y-70 Z0.15 F1200 ; slow wipe -G1 E17 F2400 -G1 X110 Y-70 Z0.5 F1200 ; lift -G92 E0 -;purge left -T1 -;M104 T0 S{material_standby_temperature, 0} -M104 T1 S{material_print_temperature, 1} -G1 X-110 Y-70 Z30 F4800 -M109 T1 S{material_print_temperature, 1} -G92 E0 -G1 Z0.4 F1800 -G1 X-67 Y-70 E25 F300 ; purge nozzle -G1 X-77 Y-70 Z0.15 F1200 ; slow wipe -G1 E22 F3600 -G1 X-67 Y-70 Z0.5 F1200 ; lift -G92 E0 -;START G-CODE; -;END G-CODE; -G1 X150 Y75 Z150 F1000 ; send Z axis to bottom of machine -M140 S0; cool down HBP -M104 T0 S0 ; cool down right extruder -M104 T1 S0 ; cool down left extruder -M127 ; stop blower fan -M18 ; disable stepper -;END G-CODE; diff --git a/config/examples/FolgerTech/i3-2020/Configuration.h b/config/examples/FolgerTech/i3-2020/Configuration.h deleted file mode 100644 index bb57f3f977..0000000000 --- a/config/examples/FolgerTech/i3-2020/Configuration.h +++ /dev/null @@ -1,2245 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "FT-2020 v9" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 5 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 245 -#define HEATER_1_MAXTEMP 245 -#define HEATER_2_MAXTEMP 245 -#define HEATER_3_MAXTEMP 245 -#define HEATER_4_MAXTEMP 245 -#define HEATER_5_MAXTEMP 245 -#define BED_MAXTEMP 115 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // FolgerTech i3-2020 - #define DEFAULT_Kp 11.50 - #define DEFAULT_Ki 0.50 - #define DEFAULT_Kd 60.00 - - // Ultimaker - //#define DEFAULT_Kp 22.2 - //#define DEFAULT_Ki 1.08 - //#define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 250.0 - #define DEFAULT_bedKi 18.0 - #define DEFAULT_bedKd 950.0 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -//#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 52.2 } // 52.4 is correct for printer as shipped -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 104.4 } // 104.4 with 32 micro steps enabled gives better results - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 250, 250, 2, 17 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 1000, 1000, 4, 750 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 400 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 400 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 8.5 - #define DEFAULT_YJERK 8.5 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 4.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.058 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -#define Z_SERVO_ANGLES { 40,85 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 38, -7, -10.75 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 0 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 7500 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 3 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 3 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 3 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -#define Z_HOMING_HEIGHT 2 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE (X_MAX_POS-X_MIN_POS) -#define Y_BED_SIZE (Y_MAX_POS-Y_MIN_POS) - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 6 -#define Y_MIN_POS 3 -#define Z_MIN_POS 0 -#define X_MAX_POS 207 -#define Y_MAX_POS 182 -#define Z_MAX_POS 175 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -//#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. -//#define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - #define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 0 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - #define UBL_Z_RAISE_WHEN_OFF_MESH 2.50// When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - #define PROBE_PT_1_X 45 - #define PROBE_PT_1_Y 170 - #define PROBE_PT_2_X 45 - #define PROBE_PT_2_Y 25 - #define PROBE_PT_3_X 180 - #define PROBE_PT_3_Y 25 -#endif - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (40*60) -#define HOMING_FEEDRATE_Z (55) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -//#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -#define NUM_SERVOS 2 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 500, 500 } - -// Only power servos during movement, otherwise leave off to prevent jitter -#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/config/examples/FolgerTech/i3-2020/Configuration_adv.h deleted file mode 100644 index 4685e4c973..0000000000 --- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h +++ /dev/null @@ -1,2939 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 2 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - #define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G27" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 2 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 2 - - #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.5 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - //#define USER_DESC_5 "Home & Info" - //#define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) -#define MAX7219_CLK_PIN 64 // on RAMPS // Configuration of the 3 pins to control the display -#define MAX7219_DIN_PIN 57 // on RAMPS -#define MAX7219_LOAD_PIN 44 // on RAMPS - -//#define MAX7219_CLK_PIN P1_04 // on Re-ARM ENET_TX_EN J12-10 -//#define MAX7219_DIN_PIN P1_00 // on Re-ARM ENET_TXD0 J12-11 -//#define MAX7219_LOAD_PIN P1_01 // on Re-ARM ENET_TXD1 J12-12 - -//#define MAX7219_CLK_PIN P4_29 // for RAMPS E1 on Re-ARM E1_ENABLE_PIN P4_29 -//#define MAX7219_DIN_PIN P2_13 // for RAMPS E1 on Re-ARM E1_DIR_PIN P2_13 -//#define MAX7219_LOAD_PIN P2_08 // for RAMPS E1 on Re-ARM E1_STEP_PIN P2_08 - - #define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 2 // Number of Max7219 units in chain. - #define MAX7219_ROTATE -90 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Formbot/Raptor/Configuration.h b/config/examples/Formbot/Raptor/Configuration.h deleted file mode 100644 index 257695703a..0000000000 --- a/config/examples/Formbot/Raptor/Configuration.h +++ /dev/null @@ -1,2345 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// vvvvvv CUSTOMIZE FOR YOUR MACHINE vvvvvv - -// Change only the flags in this section. -// Further customizations have not been tested. - -/** - * Enable if you replace the stepper drivers with TMC2208. Be sure to remove MS3 jumper - * under the stepper driver! Plug-and-play results in StealthChop 2 being enabled. - * Stealthchop with TMC2208 on E will disable Linear Advance! - * Enable SpreadCycle to use Linear Advance with a TMC2208 on the extruder! - * These options assume configuration with OTP bits. - * If a UART connection is used to configure the driver, please select that as well in Configuration_adv.h. - */ -//#define X_2208 -//#define X_SPREADCYCLE -//#define Y_2208 -//#define Y_SPREADCYCLE -//#define E_2208 -//#define E_SPREADCYCLE - - -/** - * Enable if you install a KEENOVO AC BED with Solid State Relay - */ -//#define BED_AC - -//#define HotendAllMetal -/** - * Enable if you install a filament runout sensor from www.formbotusa.com - */ -//#define RunoutSensor - -/** - * Enable if you wish to select Unified Bed Leveling. - * Under CUSTOM COMMANDS, run Step 1 and 2 before setting Z Offset. - */ -//#define UBL - -// ^^^^^^ CUSTOMIZE FOR YOUR MACHINE ^^^^^^ - - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "Tinymachines3D" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 115200 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_FORMBOT_RAPTOR -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "TM3D RaPtOr" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#if ENABLED(BED_AC) - #define TEMP_SENSOR_BED 11 -#else - #define TEMP_SENSOR_BED 1 -#endif -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 290 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#if ENABLED(BED_AC) - #define BED_MAXTEMP 150 -#else - #define BED_MAXTEMP 100 -#endif - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - #if ENABLED(HotendAllMetal) - #define DEFAULT_Kp 21.9 - #define DEFAULT_Ki 1.5 - #define DEFAULT_Kd 79.88 - #else - #define DEFAULT_Kp 22.2 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114 - #endif - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 100.0 - #define DEFAULT_bedKi 15.0 - #define DEFAULT_bedKd 200.0 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -//#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#if ENABLED(Y_2208) - #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 1600, 96 } -#else - #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 160, 1600, 96 } -#endif - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 250, 150, 5, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#if ENABLED(X_2208) - #if ENABLED(X_SPREADCYCLE) - #define X_ACCEL 1750 - #else - #define X_ACCEL 1000 - #endif -#else - #define X_ACCEL 1500 -#endif - -#if ENABLED(Y_2208) - #if ENABLED(Y_SPREADCYCLE) - #define Y_ACCEL 500 - #else - #define Y_ACCEL 300 - #endif -#else - #define Y_ACCEL 500 -#endif -#define DEFAULT_MAX_ACCELERATION { X_ACCEL, Y_ACCEL, 400, 4000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #if ENABLED(X_SPREADCYCLE) || DISABLED(X_2208) - #define DEFAULT_XJERK 20.0 - #else - #define DEFAULT_XJERK 10.0 - #endif - #if ENABLED(Y_SPREADCYCLE) || DISABLED(Y_2208) - #define DEFAULT_YJERK 10.0 - #else - #define DEFAULT_YJERK 5.0 - #endif - #define DEFAULT_ZJERK 0.4 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM (.4 * DEFAULT_YJERK * DEFAULT_YJERK / DEFAULT_ACCELERATION) // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { -22, 0, -1.5 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -3 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -//#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#if ENABLED(X_2208) - #define INVERT_X_DIR true -#else - #define INVERT_X_DIR false -#endif -#if ENABLED(Y_2208) - #define INVERT_Y_DIR true -#else - #define INVERT_Y_DIR false -#endif -#define INVERT_Z_DIR true - - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#if ENABLED(E_2208) - #define INVERT_E0_DIR false - #define INVERT_E1_DIR false -#else - #define INVERT_E0_DIR true - #define INVERT_E1_DIR true -#endif -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR 1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 400 -#define Y_BED_SIZE 400 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 500 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -#if ENABLED(RunoutSensor) - #define FILAMENT_RUNOUT_SENSOR -#endif -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_PIN 57 - #define FIL_RUNOUT_INVERTING true // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -#if ENABLED(UBL) - #define AUTO_BED_LEVELING_UBL -#else - #define AUTO_BED_LEVELING_BILINEAR -#endif - -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - #define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 6 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - #define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - #define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 35 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - #define UBL_Z_RAISE_WHEN_OFF_MESH 0.0 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - #define PROBE_PT_1_X 50 - #define PROBE_PT_1_Y 350 - #define PROBE_PT_2_X 50 - #define PROBE_PT_2_Y 50 - #define PROBE_PT_3_X 350 - #define PROBE_PT_3_Y 50 -#endif - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -#define Z_PROBE_END_SCRIPT "M280 P0 S90" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT 50 // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT 50 // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 200 -#define PREHEAT_1_TEMP_BED 60 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 220 -#define PREHEAT_2_TEMP_BED 100 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { 10, 10, 20} - #define NOZZLE_PARK_XY_FEEDRATE 70 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Formbot/Raptor/Configuration_adv.h b/config/examples/Formbot/Raptor/Configuration_adv.h deleted file mode 100644 index 331521f70d..0000000000 --- a/config/examples/Formbot/Raptor/Configuration_adv.h +++ /dev/null @@ -1,2935 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 210 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 2 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 210 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 300 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 255 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - #define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - #define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G27" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 20 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE true // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - #define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - #define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - #define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 25 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 25 - - #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -#if DISABLED(E_2208) || ENABLED(E_SpreadCycle) - #define LIN_ADVANCE -#endif -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 5 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 2 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - #define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -#if ENABLED(UBL) - #define CUSTOM_USER_MENUS -#endif -#if ENABLED(CUSTOM_USER_MENUS) - #define CUSTOM_USER_MENU_TITLE "Commissioning" - //#define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - #define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "UBL Commission Step 1" - #define USER_GCODE_1 "M502\nM500\nM501\nM190 S75\nG28\nG29 P1\nG29 S1\nM117 Run Step 2" - - #define USER_DESC_2 "UBL Commission Step 2" - #define USER_GCODE_2 "G29 S1\nG29 S0\nG29 F 10.0\nG29 A\nM500\nG28\nG29 L1\nM109 S225\nG1 X150 Y 150\nG1 Z0\nM117 Set Z Offset" - - #define USER_DESC_3 "Prep for Z Adjust" - #define USER_GCODE_3 "M190 75\nM104 235\nG28\nG29 L1\nG1 X150 Y 150\nG1 Z0" - - #define USER_DESC_4 "Fill Mesh Points" - #define USER_GCODE_4 "G29 P3\nG29 P3\nG29 P3\nG29 T" - - #define USER_DESC_5 "Run Mesh Validation" - #define USER_GCODE_5 "G26" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Formbot/Raptor/_Bootscreen.h b/config/examples/Formbot/Raptor/_Bootscreen.h deleted file mode 100644 index a7805bb4f4..0000000000 --- a/config/examples/Formbot/Raptor/_Bootscreen.h +++ /dev/null @@ -1,94 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Custom Bitmap for splashscreen - * - * You may use one of the following tools to generate the C++ bitmap array from - * a black and white image: - * - * - http://www.marlinfw.org/tools/u8glib/converter.html - * - http://www.digole.com/tools/PicturetoC_Hex_converter.php - */ -#include - -#define CUSTOM_BOOTSCREEN_BMPWIDTH 128 -#define CUSTOM_BOOTSCREEN_INVERTED - -const unsigned char custom_start_bmp[] PROGMEM = { - B11111101,B01010101,B01010101,B01010101,B01010101,B01010101,B01011111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111110,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111101,B00000000,B00000000,B00000111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111110,B00000111,B11000000,B00000101,B01010101,B01010101,B01010101,B01010101,B01010101,B01011111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111100,B00001010,B00100000,B00000110,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111110,B00010100,B00010000,B00000101,B00000000,B00000000,B00000111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111100,B00101000,B00001000,B00000110,B00000111,B11000000,B00000101,B01010101,B01010101,B01010101,B01010101,B01010101,B01011111,B11111111,B11111111,B11111111, - B11111110,B01010100,B00000100,B00000100,B00001010,B00100000,B00000110,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111111,B11111111, - B11111100,B01100000,B00000100,B00000110,B00010100,B00010000,B00000101,B00000000,B00000000,B00000111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111110,B01010000,B00000100,B00000100,B00101000,B00001000,B00000110,B00000111,B11000000,B00000101,B01010101,B01010101,B01010101,B01010101,B01010101,B01011111, - B11111100,B01100000,B00000100,B00000110,B01010100,B00000100,B00000100,B00001010,B00100000,B00000110,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111, - B11111110,B01010100,B00000100,B00011100,B01100000,B00000100,B00000110,B00010100,B00010000,B00000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00011111, - B11111100,B00101000,B00001000,B00101110,B01010000,B00000100,B00000100,B00101000,B00001000,B00000110,B00000111,B11000000,B00000000,B00000001,B11110000,B00111111, - B11111110,B00010100,B00010000,B01010100,B01100000,B00000100,B00000110,B01010100,B00000100,B00000100,B00001010,B00100000,B00000000,B00000010,B00001000,B00011111, - B11111100,B00001010,B00100000,B01100110,B01010100,B00000100,B00011100,B01100000,B00000100,B00000110,B00010100,B00010000,B00000000,B00000101,B00000100,B00111111, - B11111110,B00000111,B11000000,B01010100,B00101000,B00001000,B00101110,B01010000,B00000100,B00000100,B00101000,B00001000,B00000000,B00001010,B00000010,B00011111, - B11111100,B00000000,B00000000,B00101110,B00010100,B00010000,B01010100,B01100000,B00000100,B00000110,B01010100,B00000100,B00000000,B00010101,B00000001,B00111111, - B11111110,B00000000,B00000000,B00011100,B00001010,B00100000,B01100110,B01010100,B00000100,B00011100,B01100000,B00000100,B00000000,B00011000,B00000001,B00011111, - B11111100,B00000000,B00000000,B00000110,B00000111,B11000000,B01010100,B00101000,B00001000,B00101110,B01010000,B00000100,B00000000,B00010100,B00000001,B00111111, - B11111110,B00000000,B00000000,B00000100,B00000000,B00000000,B00101110,B00010100,B00010000,B01010100,B01100000,B00000100,B00000000,B00011000,B00000001,B00011111, - B11111100,B11111111,B11111111,B11111110,B00000000,B00000000,B00011100,B00001010,B00100000,B01100110,B01010100,B00000100,B00011100,B00010101,B00000001,B00111111, - B11111110,B11010101,B01010101,B01010100,B00000000,B00000000,B00000110,B00000111,B11000000,B01010100,B00101000,B00001000,B00101010,B00001010,B00000010,B00011111, - B11111100,B10000100,B00010000,B01000110,B00000000,B00000000,B00000100,B00000000,B00000000,B00101110,B00010100,B00010000,B01010001,B00000101,B00000100,B00111111, - B11111110,B11000100,B00010000,B01000100,B11111111,B11111111,B11111110,B00000000,B00000000,B00011100,B00001010,B00100000,B01100001,B00000010,B10001000,B00011111, - B11111100,B10000100,B00010000,B01000110,B11010101,B01010101,B01010100,B00000000,B00000000,B00000110,B00000111,B11000000,B01010001,B00000001,B11110000,B00111111, - B11111110,B10000100,B00010000,B01000100,B10000100,B00010000,B01000110,B00000000,B00000000,B00000100,B00000000,B00000000,B00101010,B00000000,B00000000,B00011111, - B11111100,B11000100,B00010000,B01000110,B11000100,B00010000,B01000100,B11111111,B11111111,B11111110,B00000000,B00000000,B00011100,B00000000,B00000000,B00111111, - B11111110,B10000100,B00010000,B01000100,B10000100,B00010000,B01000110,B11010101,B01010101,B01010100,B00000000,B00000000,B00000000,B00000000,B00000000,B00011111, - B11111100,B11010101,B01010101,B01010110,B10000100,B00010000,B01000100,B10000100,B00010000,B01000110,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111, - B11111100,B11111111,B11111111,B11111100,B11000100,B00010000,B01000110,B11000100,B00010000,B01000100,B11111111,B11111111,B11111111,B11111111,B11111111,B10011111, - B11111110,B00000000,B00000000,B00000110,B10000100,B00010000,B01000100,B10000100,B00010000,B01000110,B11010101,B01010101,B01010101,B01010101,B01010101,B10111111, - B11111101,B01010101,B01010101,B01010100,B11010101,B01010101,B01010110,B10000100,B00010000,B01000100,B10000100,B00010000,B01000001,B00000100,B00010000,B10011111, - B11111111,B11111111,B11111111,B11111100,B11111111,B11111111,B11111100,B11000100,B00010000,B01000110,B11000100,B00010000,B01000001,B00000100,B00010001,B10111111, - B11111111,B11111111,B11111111,B11111110,B00000000,B00000000,B00000110,B10000100,B00010000,B01000100,B10000100,B00010000,B01000001,B00000100,B00010000,B10011111, - B11111111,B11111111,B11111111,B11111101,B01010101,B01010101,B01010100,B11010101,B01010101,B01010110,B10000100,B00010000,B01000001,B00000100,B00010000,B10011111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111100,B11111111,B11111111,B11111100,B11000100,B00010000,B01000001,B00000100,B00010001,B10111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111110,B00000000,B00000000,B00000110,B10000100,B00010000,B01000001,B00000100,B00010000,B10011111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111101,B01010101,B01010101,B01010100,B11010101,B01010101,B01010101,B01010101,B01010101,B10111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111100,B11111111,B11111111,B11111111,B11111111,B11111111,B10011111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111110,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111101,B01010101,B01010101,B01010101,B01010101,B01010101,B01011111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11100000,B00101110,B11111011,B01111101,B11111011,B11111011,B11001111,B11000001,B11011111,B10111011,B00111110,B11000000,B11100001,B11111110,B00111100,B00011111, - B11111101,B11101110,B01111011,B00111001,B11111001,B11110011,B11001111,B10011110,B11011111,B10111011,B00111110,B11011111,B11011110,B11111100,B11011101,B11100111, - B11111101,B11101110,B00111011,B10111011,B11111001,B11101011,B11010111,B10111111,B01011111,B10111011,B01011110,B11011111,B11011110,B11111101,B11101101,B11110111, - B11111101,B11101110,B10111011,B11010011,B11111010,B11101011,B10110111,B00111111,B11011111,B10111011,B01001110,B11011111,B11011111,B11111111,B11001101,B11110011, - B11111101,B11101110,B11011011,B11000111,B11111010,B11101011,B10111011,B01111111,B11000000,B00111011,B01101110,B11000000,B11100011,B11111111,B00011101,B11110011, - B11111101,B11101110,B11001011,B11101111,B11111010,B11011011,B10111011,B01111111,B11011111,B10111011,B01100110,B11011111,B11111000,B11111111,B11001101,B11110011, - B11111101,B11101110,B11101011,B11101111,B11111011,B01011011,B00000011,B00111111,B01011111,B10111011,B01110110,B11011111,B11111110,B01111111,B11101101,B11110011, - B11111101,B11101110,B11110011,B11101111,B11111011,B01011011,B01111001,B10111110,B11011111,B10111011,B01111010,B11011111,B11011110,B01111101,B11101101,B11110111, - B11111101,B11101110,B11110011,B11101111,B11111011,B10111010,B11111101,B10011110,B11011111,B10111011,B01111100,B11011111,B11011110,B11111101,B11001101,B11100111, - B11111101,B11101110,B11111011,B11101111,B11111011,B10111010,B11111101,B11000001,B11011111,B10111011,B01111110,B11000000,B11100000,B11111110,B00011100,B00011111 -}; diff --git a/config/examples/Formbot/Raptor/_Statusscreen.h b/config/examples/Formbot/Raptor/_Statusscreen.h deleted file mode 100644 index 304d5a0b73..0000000000 --- a/config/examples/Formbot/Raptor/_Statusscreen.h +++ /dev/null @@ -1,75 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Custom Status Screen bitmap - * - * Place this file in the root with your configuration files - * and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h. - * - * Use the Marlin Bitmap Converter to make your own: - * http://marlinfw.org/tools/u8glib/converter.html - */ - -// -// Status Screen Logo bitmap -// -#define STATUS_LOGO_Y 3 -#define STATUS_LOGO_WIDTH 24 - -const unsigned char status_logo_bmp[] PROGMEM = { - B11111111,B11111111,B11111111, - B10000000,B00000000,B00000001, - B10001110,B00000000,B11100001, - B10011111,B00000001,B11110001, - B10010011,B10000001,B00111001, - B10011111,B10000001,B11111001, - B10011111,B10000001,B11111001, - B10011111,B10111001,B11111001, - B10001111,B00101000,B11110001, - B10000000,B00111000,B00000001, - B10000000,B00000000,B00000001, - B10011111,B11111111,B11111001, - B10010001,B01110100,B10011001, - B10011011,B00000110,B10101001, - B10011011,B01010100,B10101001, - B10011011,B01010110,B10101001, - B10011011,B01010100,B10011001, - B10011111,B11111111,B11111001, - B11111111,B11111111,B11111111 -}; - -// -// Use default bitmaps -// -#define STATUS_HOTEND_ANIM -#define STATUS_BED_ANIM -#if HOTENDS < 2 - #define STATUS_LOGO_X 8 - #define STATUS_HEATERS_X 40 - #define STATUS_BED_X 72 -#else - #define STATUS_LOGO_X 0 - #define STATUS_HEATERS_X 32 - #define STATUS_BED_X 80 -#endif diff --git a/config/examples/Formbot/T_Rex_2+/Configuration.h b/config/examples/Formbot/T_Rex_2+/Configuration.h deleted file mode 100644 index 1a09e51bc0..0000000000 --- a/config/examples/Formbot/T_Rex_2+/Configuration.h +++ /dev/null @@ -1,2279 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -//#define ROXYs_TRex // Turn this on to get customizations only available on Roxy's T-Rex 2+ - // Marlin controlled heat bed, Max7219 debug LED's, less bright LED light level - // More aggressive PID numbers for hotends (due to double fans) -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "Formbot-3D" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_FORMBOT_TREX2PLUS -#endif - -// Name displayed in the LCD "Ready" message and Info menu - #define CUSTOM_MACHINE_NAME "T-Rex 2+" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 2 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -#ifdef ROXYs_TRex - #define HOTEND_OFFSET_X { 0.0, 0.00 } // (mm) for each extruder, offset of the hotend on the X axis - #define HOTEND_OFFSET_Y { 0.0, 1.25 } // (mm) for each extruder, offset of the hotend on the Y axis - #define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle -#endif - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 1 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 - -#ifdef ROXYs_TRex - #define TEMP_SENSOR_BED 11 -#else - #define TEMP_SENSOR_BED 0 -#endif - -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 410 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - #ifdef ROXYs_TRex - // Roxy's T-Rex 2+ - #define DEFAULT_Kp 15.17 - #define DEFAULT_Ki 0.88 - #define DEFAULT_Kd 65.24 - #else - // T-Rex 2+ - #define DEFAULT_Kp 22.2 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114 - #endif - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - #ifdef ROXYs_TRex - // T-Rex 2+ - #define DEFAULT_bedKp 289.73 - #define DEFAULT_bedKi 51.26 - #define DEFAULT_bedKd 409.43 - #else - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - #endif - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -//#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -#define USE_XMAX_PLUG -#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 800, 93 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 200, 100, 5, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 1500, 500, 400, 4000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 1500 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 1500 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 1500 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 12.0 // More conservative numbers. - #define DEFAULT_YJERK 8.0 - #define DEFAULT_ZJERK 0.4 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.017 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { -3, 31, -1.25 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 0 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 5000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 7 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 7 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -#define Z_AFTER_PROBING 10 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -//#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR false -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR true -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -#define Z_HOMING_HEIGHT 8 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR 1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 400 -#define Y_BED_SIZE 400 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS -42 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS 450 -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 700 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. -//#define SEGMENT_LEVELED_MOVES -//#define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - #define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 208 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - #define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #ifdef ROXYs_TRex - #define MESH_INSET 35 // Set Mesh bounds as an inset region of the bed - #else - #define MESH_INSET 0 - #endif - - #define GRID_MAX_POINTS_X 11 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - #define UBL_Z_RAISE_WHEN_OFF_MESH 0.0 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - #define PROBE_PT_1_X 35 - #define PROBE_PT_1_Y 365 - #define PROBE_PT_2_X 35 - #define PROBE_PT_2_Y 35 - #define PROBE_PT_3_X 365 - #define PROBE_PT_3_Y 35 -#endif - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -#define Z_PROBE_END_SCRIPT "M280 P0 S90" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT (((X_BED_SIZE) / 2) - 15) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT (((Y_BED_SIZE) / 2) - 15) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -//#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 5 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { 50, (Y_MIN_POS + 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES - -#ifdef ROXYs_TRex - #define LED_PIN -1 - #define BEEPER_PIN -1 - #define KILL_PIN -1 -#endif diff --git a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h deleted file mode 100644 index 2dbebf23d8..0000000000 --- a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h +++ /dev/null @@ -1,2945 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 10 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 60 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - #define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -#define FAN_MIN_PWM 45 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - #define CASE_LIGHT_PIN 8 - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #ifdef ROXYs_TRex - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 25 // Set default power-up brightness (0-255, requires PWM pin) - #else - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 255 // Set default power-up brightness (0-255, requires PWM pin) - #endif - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - #define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS (X_BED_SIZE) // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 0 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS (442-4.0) // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 200 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 600 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - #define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G27" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 20 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE true // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - #define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - #define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - #define BABYSTEP_WITHOUT_HOMING - #define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 40 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 40 - - #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - #define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - #define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X 4 - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 4 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 41 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 50 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 30 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 50 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 20 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 0 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 500 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 0 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT (3*60) // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 3 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - #define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - #define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.5 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ - -#ifdef ROXYs_TRex - #define MAX7219_DEBUG -#endif - -#if ENABLED(MAX7219_DEBUG) - /* - #define MAX7219_CLK_PIN 50 // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 51 // on RUMBA (or Formbot) using the ICSP port. - #define MAX7219_LOAD_PIN 52 // This will affect your use of the SD Memory card - */ - - #define MAX7219_CLK_PIN 41 // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 13 // 41 is LCD_Kill_Button, 13 is Arduino_LED, 37 is LCD_Beeper - #define MAX7219_LOAD_PIN 37 - - #define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 3 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - #define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 5 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 6 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 7 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Formbot/T_Rex_2+/_Bootscreen.h b/config/examples/Formbot/T_Rex_2+/_Bootscreen.h deleted file mode 100644 index c3195d31fa..0000000000 --- a/config/examples/Formbot/T_Rex_2+/_Bootscreen.h +++ /dev/null @@ -1,102 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Custom Bitmap for splashscreen - * - * You may use one of the following tools to generate the C++ bitmap array from - * a black and white image: - * - * - http://www.marlinfw.org/tools/u8glib/converter.html - * - http://www.digole.com/tools/PicturetoC_Hex_converter.php - */ -#include - -#define CUSTOM_BOOTSCREEN_BMPWIDTH 128 - -const unsigned char custom_start_bmp[] PROGMEM = { - B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001111, - B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001, - B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001, - B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,B11111110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11111111,B11111111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,B11111111,B11111111,B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00011111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00011111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11100000,B00111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100000,B00111111,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11100000,B00111111,B11111111,B11111111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11100000,B00111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11100000,B00111111,B11111111,B11111110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B00111111,B11111111,B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11111110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B11111111,B11111111,B00000000,B01111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11100000,B00000000,B00000000, - B00000000,B11111111,B11111111,B00000000,B01111111,B11111000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11110000,B00000000,B00000000, - B00000000,B10000011,B11000001,B00000000,B01110000,B00111100,B00000000,B00111000,B00000011,B11000000,B01111000,B00000000,B00000111,B00111000,B00000000,B00000000, - B00000000,B00000011,B11000000,B00000000,B01110000,B00011110,B00000001,B11111110,B00000000,B11000000,B01100000,B00000000,B00001110,B00011100,B00000110,B00000000, - B00000000,B00000011,B11000000,B00000000,B01110000,B00111100,B00000011,B11000111,B00000000,B01100000,B11000000,B00000000,B00001100,B00001100,B00000110,B00000000, - B00000000,B00000011,B11000000,B00000000,B01111110,B01111000,B00000110,B00000001,B10000000,B00110001,B10000000,B00000000,B00000000,B00001100,B00000110,B00000000, - B00000000,B00000011,B11000000,B11111111,B01111111,B11100000,B00000110,B00000001,B11000000,B00011011,B00000000,B00000000,B00000000,B00011100,B00111111,B11000000, - B00000000,B00000011,B11000000,B11111111,B01110000,B11100000,B00001111,B11111111,B11000000,B00001111,B00000000,B00000000,B00000000,B00111000,B00111111,B11000000, - B00000000,B00000011,B11000000,B00000000,B01110000,B01111000,B00001100,B00000000,B00000000,B00001111,B00000000,B00000000,B00000000,B01110000,B00000110,B00000000, - B00000000,B00000011,B11000000,B00000000,B01110000,B00111100,B00000110,B00000000,B00000000,B00011001,B10000000,B00000000,B00000000,B01100000,B00000110,B00000000, - B00000000,B00000011,B11000000,B00000000,B01110000,B00011110,B00000110,B00000000,B11000000,B00110000,B11000000,B00000000,B00000001,B11000000,B00000110,B00000000, - B10000000,B00000011,B11000000,B00000000,B01110000,B00011110,B00000011,B10000001,B10000000,B01100000,B01100000,B00000000,B00000011,B10000000,B00000000,B00000001, - B10000000,B00000011,B11000000,B00000000,B01110000,B00001110,B10000001,B11111111,B10000000,B11000000,B00110000,B00000000,B00001111,B11111100,B00000000,B00000001, - B10000000,B00000011,B11000000,B00000000,B01110000,B00000111,B00000000,B01111100,B00000011,B10000000,B00011100,B00000000,B00011111,B11111100,B00000000,B00000001, - B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001111 -}; diff --git a/config/examples/Formbot/T_Rex_2+/_Statusscreen.h b/config/examples/Formbot/T_Rex_2+/_Statusscreen.h deleted file mode 100644 index db4487db10..0000000000 --- a/config/examples/Formbot/T_Rex_2+/_Statusscreen.h +++ /dev/null @@ -1,74 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Custom Status Screen bitmap - * - * Place this file in the root with your configuration files - * and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h. - * - * Use the Marlin Bitmap Converter to make your own: - * http://marlinfw.org/tools/u8glib/converter.html - */ - -// -// Status Screen Logo bitmap -// -#define STATUS_LOGO_Y 4 -#define STATUS_LOGO_WIDTH 21 - -const unsigned char status_logo_bmp[] PROGMEM = { - B00000000,B00011110,B00000000, - B00000000,B11111111,B10000000, - B00000001,B11111111,B11100000, - B00000111,B00000000,B00000000, - B00001111,B00000000,B00000000, - B00011111,B00001111,B11111000, - B00011111,B00001111,B11111000, - B00011111,B00001111,B11111000, - B00011111,B00001111,B11111000, - B00011111,B00001111,B11111000, - B00011111,B00001111,B11111000, - B00011111,B00000000,B00000000, - B00011111,B00000000,B00000000, - B00001111,B00001111,B11111000, - B00000111,B00001111,B11110000, - B00000011,B00001111,B11000000, - B00000001,B00001111,B00000000, - B00000000,B00001100,B00000000 -}; - -// -// Use default bitmaps -// -#define STATUS_HOTEND_ANIM -#define STATUS_BED_ANIM -#if HOTENDS < 2 - #define STATUS_LOGO_X 8 - #define STATUS_HEATERS_X 40 - #define STATUS_BED_X 72 -#else - #define STATUS_LOGO_X 0 - #define STATUS_HEATERS_X 32 - #define STATUS_BED_X 80 -#endif diff --git a/config/examples/Formbot/T_Rex_3/Configuration.h b/config/examples/Formbot/T_Rex_3/Configuration.h deleted file mode 100644 index 0f2b5c3211..0000000000 --- a/config/examples/Formbot/T_Rex_3/Configuration.h +++ /dev/null @@ -1,2269 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -#define ICSP_PORT_SWITCHES // If ICSP_PORT_SWITCHES is defined, those pins become filament runout sensors - // (But the SD Memory card won't work and is turned off!!!) - - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "Formbot-3D" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_FORMBOT_TREX3 -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "T-Rex 3" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 2 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 1 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 11 - -#ifndef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 0 -#endif - -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 410 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Based on T-Rex 2+ - #define DEFAULT_Kp 22.2 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -//#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -#define USE_XMAX_PLUG -#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -//#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 160, 1600, 93 } -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 800, 93 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -//#define DEFAULT_MAX_FEEDRATE { 250, 150, 5, 25 } -#define DEFAULT_MAX_FEEDRATE { 250, 100, 5, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 1500, 500, 400, 4000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ - -#define DEFAULT_ACCELERATION 1500 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 1500 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 1500 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 12.0 // More conservative numbers. - #define DEFAULT_YJERK 8.0 - #define DEFAULT_ZJERK 0.4 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.017 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { -3, 31, -1.25 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 0 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 7000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 7 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 7 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -#define Z_AFTER_PROBING 7 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -//#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR false -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR true -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -#define Z_HOMING_HEIGHT 8 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR 1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 400 -#define Y_BED_SIZE 400 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS -42 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS 450 -#define Y_MAX_POS Y_BED_SIZE -#if ENABLED(tallVersion) - #define Z_MAX_POS 700 -#else - #define Z_MAX_POS 500 -#endif - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ - -#define FILAMENT_RUNOUT_SENSOR -#define NUM_RUNOUT_SENSORS 2 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #ifndef NUM_RUNOUT_SENSORS - #define NUM_RUNOUT_SENSORS 1 - #endif - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. -//#define SEGMENT_LEVELED_MOVES -//#define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - #define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - #define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 0 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 11 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - #define UBL_Z_RAISE_WHEN_OFF_MESH 0.0 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - #define PROBE_PT_1_X 35 - #define PROBE_PT_1_Y 365 - #define PROBE_PT_2_X 35 - #define PROBE_PT_2_Y 35 - #define PROBE_PT_3_X 365 - #define PROBE_PT_3_Y 35 -#endif - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -#define Z_PROBE_END_SCRIPT "M280 P0 S90" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -//#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 5 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { 100, (Y_MIN_POS + 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ - -#if DISABLED(ICSP_PORT_SWITCHES) // If ICSP_PORT is in use, those pins now are filament runout sensors - #define SDSUPPORT // instead of being used by the SD Memory card socket -#endif - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES - -#ifdef ROXYs_TRex - #define LED_PIN -1 - #define BEEPER_PIN -1 - #define KILL_PIN -1 -#endif diff --git a/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/config/examples/Formbot/T_Rex_3/Configuration_adv.h deleted file mode 100644 index 609bbda205..0000000000 --- a/config/examples/Formbot/T_Rex_3/Configuration_adv.h +++ /dev/null @@ -1,2940 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 10 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 60 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - #define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -#define FAN_MIN_PWM 64 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) -//#define CASE_LIGHT_PIN 8 // Now set in appropriate pins file - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #ifdef ROXYs_TRex - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 25 // Set default power-up brightness (0-255, requires PWM pin) - #else - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 255 // Set default power-up brightness (0-255, requires PWM pin) - #endif - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - #define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 0 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS (442-4.0) // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 200 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 600 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - #define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G27" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 20 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE true // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - #define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - #define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 40 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 40 - - #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X 4 - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 7 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 1 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 15 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 15 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 85 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 3 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 1 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 4 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 15 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 60 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 2 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 20 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 0 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 500 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 0 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT (3*60) // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 3 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - #define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - #define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.5 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define USER_SCRIPT_AUDIBLE_FEEDBACK - #define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "User cmd 1" - #define USER_GCODE_1 "G28 X \n" - - #define USER_DESC_2 "User cmd 2" - #define USER_GCODE_2 "G28 \nG1 X100 \n" - - #define USER_DESC_3 "User cmd 3" - #define USER_GCODE_3 "M48 \n" - - #define USER_DESC_4 "User cmd 4" - #define USER_GCODE_4 "M114 \n" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ - -#ifdef ROXYs_TRex - #define MAX7219_DEBUG -#endif - -#if ENABLED(MAX7219_DEBUG) - /* - #define MAX7219_CLK_PIN 50 // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 51 // on RUMBA (or Formbot) using the ICSP port is used - #define MAX7219_LOAD_PIN 52 // This will affect your use of the SD Memory card - */ - - #define MAX7219_CLK_PIN 41 // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 13 // 41 is LCD_Kill_Button, 13 is Arduino_LED, 37 is LCD_Beeper - #define MAX7219_LOAD_PIN 37 - - #define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 2 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 5 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 6 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 7 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Formbot/T_Rex_3/_Bootscreen.h b/config/examples/Formbot/T_Rex_3/_Bootscreen.h deleted file mode 100644 index d3f9073a0c..0000000000 --- a/config/examples/Formbot/T_Rex_3/_Bootscreen.h +++ /dev/null @@ -1,102 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Custom Bitmap for splashscreen - * - * You may use one of the following tools to generate the C++ bitmap array from - * a black and white image: - * - * - http://www.marlinfw.org/tools/u8glib/converter.html - * - http://www.digole.com/tools/PicturetoC_Hex_converter.php - */ -#include - -#define CUSTOM_BOOTSCREEN_BMPWIDTH 128 - -const unsigned char custom_start_bmp[] PROGMEM = { - B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001111, - B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001, - B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001, - B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,B11111110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11111111,B11111111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,B11111111,B11111111,B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00011111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00011111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11100000,B00111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100000,B00111111,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11100000,B00111111,B11111111,B11111111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11100000,B00111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11100000,B00111111,B11111111,B11111110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B00111111,B11111111,B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11111110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B11111111,B11111111,B00000000,B01111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11100000,B00000000,B00000000, - B00000000,B11111111,B11111111,B00000000,B01111111,B11111000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11110000,B00000000,B00000000, - B00000000,B10000011,B11000001,B00000000,B01110000,B00111100,B00000000,B00111000,B00000011,B11000000,B01111000,B00000000,B00001100,B00011000,B00000000,B00000000, - B00000000,B00000011,B11000000,B00000000,B01110000,B00011110,B00000001,B11111110,B00000000,B11000000,B01100000,B00000000,B00000000,B00001100,B00000000,B00000000, - B00000000,B00000011,B11000000,B00000000,B01110000,B00111100,B00000011,B11000111,B00000000,B01100000,B11000000,B00000000,B00000000,B00001100,B00000000,B00000000, - B00000000,B00000011,B11000000,B00000000,B01111110,B01111000,B00000110,B00000001,B10000000,B00110001,B10000000,B00000000,B00000000,B00011100,B00000000,B00000000, - B00000000,B00000011,B11000000,B11111111,B01111111,B11100000,B00000110,B00000001,B11000000,B00011011,B00000000,B00000000,B00000011,B11111000,B00000000,B00000000, - B00000000,B00000011,B11000000,B11111111,B01110000,B11100000,B00001111,B11111111,B11000000,B00001111,B00000000,B00000000,B00000011,B11111000,B00000000,B00000000, - B00000000,B00000011,B11000000,B00000000,B01110000,B01111000,B00001100,B00000000,B00000000,B00001111,B00000000,B00000000,B00000000,B00011100,B00000000,B00000000, - B00000000,B00000011,B11000000,B00000000,B01110000,B00111100,B00000110,B00000000,B00000000,B00011001,B10000000,B00000000,B00000000,B00001100,B00000000,B00000000, - B00000000,B00000011,B11000000,B00000000,B01110000,B00011110,B00000110,B00000000,B11000000,B00110000,B11000000,B00000000,B00000000,B00001100,B00000000,B00000000, - B10000000,B00000011,B11000000,B00000000,B01110000,B00011110,B00000011,B10000001,B10000000,B01100000,B01100000,B00000000,B00001100,B00011000,B00000000,B00000001, - B10000000,B00000011,B11000000,B00000000,B01110000,B00001110,B10000001,B11111111,B10000000,B11000000,B00110000,B00000000,B00000111,B11110000,B00000000,B00000001, - B10000000,B00000011,B11000000,B00000000,B01110000,B00000111,B00000000,B01111100,B00000011,B10000000,B00011100,B00000000,B00000001,B11100000,B00000000,B00000001, - B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001111 -}; diff --git a/config/examples/Formbot/T_Rex_3/_Statusscreen.h b/config/examples/Formbot/T_Rex_3/_Statusscreen.h deleted file mode 100644 index db4487db10..0000000000 --- a/config/examples/Formbot/T_Rex_3/_Statusscreen.h +++ /dev/null @@ -1,74 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Custom Status Screen bitmap - * - * Place this file in the root with your configuration files - * and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h. - * - * Use the Marlin Bitmap Converter to make your own: - * http://marlinfw.org/tools/u8glib/converter.html - */ - -// -// Status Screen Logo bitmap -// -#define STATUS_LOGO_Y 4 -#define STATUS_LOGO_WIDTH 21 - -const unsigned char status_logo_bmp[] PROGMEM = { - B00000000,B00011110,B00000000, - B00000000,B11111111,B10000000, - B00000001,B11111111,B11100000, - B00000111,B00000000,B00000000, - B00001111,B00000000,B00000000, - B00011111,B00001111,B11111000, - B00011111,B00001111,B11111000, - B00011111,B00001111,B11111000, - B00011111,B00001111,B11111000, - B00011111,B00001111,B11111000, - B00011111,B00001111,B11111000, - B00011111,B00000000,B00000000, - B00011111,B00000000,B00000000, - B00001111,B00001111,B11111000, - B00000111,B00001111,B11110000, - B00000011,B00001111,B11000000, - B00000001,B00001111,B00000000, - B00000000,B00001100,B00000000 -}; - -// -// Use default bitmaps -// -#define STATUS_HOTEND_ANIM -#define STATUS_BED_ANIM -#if HOTENDS < 2 - #define STATUS_LOGO_X 8 - #define STATUS_HEATERS_X 40 - #define STATUS_BED_X 72 -#else - #define STATUS_LOGO_X 0 - #define STATUS_HEATERS_X 32 - #define STATUS_BED_X 80 -#endif diff --git a/config/examples/Geeetech/A10/Configuration.h b/config/examples/Geeetech/A10/Configuration.h deleted file mode 100644 index ee1994aab8..0000000000 --- a/config/examples/Geeetech/A10/Configuration.h +++ /dev/null @@ -1,2211 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(Phr3d13, Geeetech A10 default)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_GT2560_V3 -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Geeetech A10" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - #define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - #define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // A10M [@thinkyhead] - #define DEFAULT_Kp 45.80 - #define DEFAULT_Ki 3.61 - #define DEFAULT_Kd 145.39 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - // MeCreator2 generated by Autotune - #define DEFAULT_bedKp 182.46 // 175.68 189.95 - #define DEFAULT_bedKi 35.92 // 34.59 37.40 - #define DEFAULT_bedKd 231.70 // 223.07 241.19 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 450 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.4 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.04 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -#define PROBE_MANUALLY -#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { -37, 0, -3.6 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 3 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 2 // Z Clearance between multiple probes -#define Z_AFTER_PROBING 3 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -5 -#define Z_PROBE_OFFSET_RANGE_MAX -0.2 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - #define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -#define DELAY_BEFORE_PROBING 100 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR false // unused, the A10 only has one extruder by default -#define INVERT_E2_DIR false // unused, the A10 only has one extruder by default -#define INVERT_E3_DIR false // unused, the A10 only has one extruder by default -#define INVERT_E4_DIR false // unused, the A10 only has one extruder by default -#define INVERT_E5_DIR false // unused, the A10 only has one extruder by default - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 230 -#define Y_BED_SIZE 230 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS -11 -#define Y_MIN_POS -4 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 260 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_PIN 66 - //#define FIL_RUNOUT2_PIN 67 - #define FIL_RUNOUT_INVERTING true // Set to true to invert the logic of the sensors. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 5 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (80*60) -#define HOMING_FEEDRATE_Z (20*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 190 -#define PREHEAT_1_TEMP_BED 60 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 90 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { 3, (Y_MAX_POS - 3), 10 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -#define ENCODER_PULSES_PER_STEP 2 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Geeetech/A10/Configuration_adv.h b/config/examples/Geeetech/A10/Configuration_adv.h deleted file mode 100644 index f41bcc8a7a..0000000000 --- a/config/examples/Geeetech/A10/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - #define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G27" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Geeetech/A10D/Configuration.h b/config/examples/Geeetech/A10D/Configuration.h deleted file mode 100644 index faec3dbec1..0000000000 --- a/config/examples/Geeetech/A10D/Configuration.h +++ /dev/null @@ -1,2210 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(default)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_GT2560_V3 -#endif - -// Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 2 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - #define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - #define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 1 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - -#define DEFAULT_Kp 226.93 //11.93 -#define DEFAULT_Ki 0.43 //0.59 -#define DEFAULT_Kd 854.89 //59.89 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - // MeCreator2 generated by Autotune - #define DEFAULT_bedKp 182.46 // 175.68 189.95 - #define DEFAULT_bedKi 35.92 // 34.59 37.40 - #define DEFAULT_bedKd 231.70 // 223.07 241.19 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 100 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 1000 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 98 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.4 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.04 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -#define PROBE_MANUALLY -#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { -37, 0, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 3 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 2 // Z Clearance between multiple probes -#define Z_AFTER_PROBING 3 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -10 -#define Z_PROBE_OFFSET_RANGE_MAX 0 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - #define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 100 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR true -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 220 -#define Y_BED_SIZE 220 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 260 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 2 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_PIN 66 - #define FIL_RUNOUT2_PIN 67 - //#define FIL_RUNOUT2_PIN 67 - #define FIL_RUNOUT_INVERTING true // Set to true to invert the logic of the sensors. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 5 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 0 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 5 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - #define UBL_Z_RAISE_WHEN_OFF_MESH 0 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (40*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 200 -#define PREHEAT_1_TEMP_BED 60 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 90 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { 3, (Y_MAX_POS - 3), 10 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 2 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -#define ULTIPANEL -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Geeetech/A10D/Configuration_adv.h b/config/examples/Geeetech/A10D/Configuration_adv.h deleted file mode 100644 index 01f633bd59..0000000000 --- a/config/examples/Geeetech/A10D/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - #define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G27" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Geeetech/A10M/Configuration.h b/config/examples/Geeetech/A10M/Configuration.h deleted file mode 100644 index 9c7baa6872..0000000000 --- a/config/examples/Geeetech/A10M/Configuration.h +++ /dev/null @@ -1,2211 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_GT2560_V3 -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Geeetech A10M" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - #define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - #define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // A10M [@thinkyhead] - #define DEFAULT_Kp 45.80 - #define DEFAULT_Ki 3.61 - #define DEFAULT_Kd 145.39 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - // MeCreator2 generated by Autotune - #define DEFAULT_bedKp 182.46 // 175.68 189.95 - #define DEFAULT_bedKi 35.92 // 34.59 37.40 - #define DEFAULT_bedKd 231.70 // 223.07 241.19 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 450 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 430 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.4 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.04 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -#define PROBE_MANUALLY -#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { -37, 0, -3.6 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 3 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 2 // Z Clearance between multiple probes -#define Z_AFTER_PROBING 3 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -5 -#define Z_PROBE_OFFSET_RANGE_MAX -0.2 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - #define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -#define DELAY_BEFORE_PROBING 100 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 230 -#define Y_BED_SIZE 230 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS -10 -#define Y_MIN_POS -5 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 260 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 2 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_PIN 66 - #define FIL_RUNOUT2_PIN 67 - #define FIL_RUNOUT_INVERTING true // Set to true to invert the logic of the sensors. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 5 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (80*60) -#define HOMING_FEEDRATE_Z (20*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 190 -#define PREHEAT_1_TEMP_BED 60 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 90 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { 3, (Y_MAX_POS - 3), 10 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -#define ENCODER_PULSES_PER_STEP 2 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Geeetech/A10M/Configuration_adv.h b/config/examples/Geeetech/A10M/Configuration_adv.h deleted file mode 100644 index 11ad33e40e..0000000000 --- a/config/examples/Geeetech/A10M/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - #define BLTOUCH_DELAY 200 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - #define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 10 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 50 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - #define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - #define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 180000 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G27" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - #define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - #define POWER_LOSS_PIN 69 // Pin to detect power loss - #define POWER_LOSS_STATE LOW // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - #define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK true // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - #define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - //#define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - #define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - #define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - #define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - #define STATUS_HEAT_PERCENT // Show heating in a progress bar - #define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 5 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 18 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 450 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 12 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 450 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 40 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Geeetech/A10T/Configuration.h b/config/examples/Geeetech/A10T/Configuration.h deleted file mode 100644 index e576dc732e..0000000000 --- a/config/examples/Geeetech/A10T/Configuration.h +++ /dev/null @@ -1,2212 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_GT2560_V3 -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Geeetech A10M" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 3 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - #define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - #define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // A10M [@thinkyhead] - #define DEFAULT_Kp 45.80 - #define DEFAULT_Ki 3.61 - #define DEFAULT_Kd 145.39 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - // MeCreator2 generated by Autotune - #define DEFAULT_bedKp 182.46 // 175.68 189.95 - #define DEFAULT_bedKi 35.92 // 34.59 37.40 - #define DEFAULT_bedKd 231.70 // 223.07 241.19 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 450 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 430 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.4 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.04 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -#define PROBE_MANUALLY -#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { -37, 0, -3.6 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 3 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 2 // Z Clearance between multiple probes -#define Z_AFTER_PROBING 3 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -5 -#define Z_PROBE_OFFSET_RANGE_MAX -0.2 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - #define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -#define DELAY_BEFORE_PROBING 100 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 230 -#define Y_BED_SIZE 230 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS -10 -#define Y_MIN_POS -5 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 260 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 3 - #define FIL_RUNOUT_PIN 66 - #define FIL_RUNOUT2_PIN 67 - #define FIL_RUNOUT3_PIN 68 - #define FIL_RUNOUT_INVERTING true // Set to true to invert the logic of the sensors. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 5 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (80*60) -#define HOMING_FEEDRATE_Z (20*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 190 -#define PREHEAT_1_TEMP_BED 60 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 90 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { 3, (Y_MAX_POS - 3), 10 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -#define ENCODER_PULSES_PER_STEP 2 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Geeetech/A10T/Configuration_adv.h b/config/examples/Geeetech/A10T/Configuration_adv.h deleted file mode 100644 index 11ad33e40e..0000000000 --- a/config/examples/Geeetech/A10T/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - #define BLTOUCH_DELAY 200 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - #define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 10 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 50 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - #define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - #define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 180000 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G27" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - #define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - #define POWER_LOSS_PIN 69 // Pin to detect power loss - #define POWER_LOSS_STATE LOW // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - #define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK true // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - #define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - //#define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - #define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - #define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - #define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - #define STATUS_HEAT_PERCENT // Show heating in a progress bar - #define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 5 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 18 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 450 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 12 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 450 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 40 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Geeetech/A20/Configuration.h b/config/examples/Geeetech/A20/Configuration.h deleted file mode 100644 index 37e6aaafe9..0000000000 --- a/config/examples/Geeetech/A20/Configuration.h +++ /dev/null @@ -1,2212 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 115200 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_GT2560_V3_A20 -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Geeetech A20M" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - #define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - #define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // A20M [@thinkyhead] - #define DEFAULT_Kp 45.80 - #define DEFAULT_Ki 3.61 - #define DEFAULT_Kd 145.39 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - // MeCreator2 generated by Autotune - #define DEFAULT_bedKp 182.46 // 175.68 189.95 - #define DEFAULT_bedKi 35.92 // 34.59 37.40 - #define DEFAULT_bedKd 231.70 // 223.07 241.19 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 400 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.4 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.04 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -#define PROBE_MANUALLY -#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { -37, 0, -3.6 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 3 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 2 // Z Clearance between multiple probes -#define Z_AFTER_PROBING 3 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -5 -#define Z_PROBE_OFFSET_RANGE_MAX -0.2 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -#define DELAY_BEFORE_PROBING 100 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 255 -#define Y_BED_SIZE 255 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS -10 -#define Y_MIN_POS -5 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 250 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_PIN 66 - #define FIL_RUNOUT_INVERTING true // Set to true to invert the logic of the sensors. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - #define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 5 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -#define LCD_BED_LEVELING -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - #define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (80*60) -#define HOMING_FEEDRATE_Z (20*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 190 -#define PREHEAT_1_TEMP_BED 60 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 90 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { 3, (Y_MAX_POS - 3), 10 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -#define ENCODER_PULSES_PER_STEP 2 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER -#define ST7920_DELAY_1 DELAY_NS(125) -#define ST7920_DELAY_2 DELAY_NS(125) -#define ST7920_DELAY_3 DELAY_NS(125) - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Geeetech/A20/Configuration_adv.h b/config/examples/Geeetech/A20/Configuration_adv.h deleted file mode 100644 index 99a780eae5..0000000000 --- a/config/examples/Geeetech/A20/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - #define BLTOUCH_DELAY 200 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - #define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 10 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 50 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - #define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - #define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 180000 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G27" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - #define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - #define POWER_LOSS_PIN 69 // Pin to detect power loss - #define POWER_LOSS_STATE LOW // State of pin indicating power loss - #define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - #define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK true // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - #define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - //#define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - #define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - #define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - #define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - #define STATUS_HEAT_PERCENT // Show heating in a progress bar - #define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - #define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - #define MARLIN_BRICKOUT - #define MARLIN_INVADERS - #define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 5 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - #define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 400 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 400 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Geeetech/A20M/Configuration.h b/config/examples/Geeetech/A20M/Configuration.h deleted file mode 100644 index 7214c15cdc..0000000000 --- a/config/examples/Geeetech/A20M/Configuration.h +++ /dev/null @@ -1,2213 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 115200 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_GT2560_V3_A20 -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Geeetech A20M" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - #define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - #define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // A20M [@thinkyhead] - #define DEFAULT_Kp 45.80 - #define DEFAULT_Ki 3.61 - #define DEFAULT_Kd 145.39 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - // MeCreator2 generated by Autotune - #define DEFAULT_bedKp 182.46 // 175.68 189.95 - #define DEFAULT_bedKi 35.92 // 34.59 37.40 - #define DEFAULT_bedKd 231.70 // 223.07 241.19 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 400 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 430 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.4 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.04 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -#define PROBE_MANUALLY -#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { -37, 0, -3.6 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 3 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 2 // Z Clearance between multiple probes -#define Z_AFTER_PROBING 3 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -5 -#define Z_PROBE_OFFSET_RANGE_MAX -0.2 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -#define DELAY_BEFORE_PROBING 100 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 255 -#define Y_BED_SIZE 255 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS -10 -#define Y_MIN_POS -5 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 250 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 2 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_PIN 66 - #define FIL_RUNOUT2_PIN 67 - #define FIL_RUNOUT_INVERTING true // Set to true to invert the logic of the sensors. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - #define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 5 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -#define LCD_BED_LEVELING -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - #define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -#define Z_PROBE_END_SCRIPT "G1 Z5 F6000\nG1 X10 Y10\nG1 Z0.2" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (80*60) -#define HOMING_FEEDRATE_Z (20*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 190 -#define PREHEAT_1_TEMP_BED 60 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 90 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { X_MIN_POS, Y_MIN_POS, 6 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -#define ENCODER_PULSES_PER_STEP 2 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER -#define ST7920_DELAY_1 DELAY_NS(125) -#define ST7920_DELAY_2 DELAY_NS(125) -#define ST7920_DELAY_3 DELAY_NS(125) - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Geeetech/A20M/Configuration_adv.h b/config/examples/Geeetech/A20M/Configuration_adv.h deleted file mode 100644 index 99a780eae5..0000000000 --- a/config/examples/Geeetech/A20M/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - #define BLTOUCH_DELAY 200 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - #define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 10 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 50 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - #define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - #define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 180000 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G27" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - #define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - #define POWER_LOSS_PIN 69 // Pin to detect power loss - #define POWER_LOSS_STATE LOW // State of pin indicating power loss - #define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - #define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK true // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - #define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - //#define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - #define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - #define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - #define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - #define STATUS_HEAT_PERCENT // Show heating in a progress bar - #define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - #define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - #define MARLIN_BRICKOUT - #define MARLIN_INVADERS - #define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 5 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - #define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 400 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 400 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Geeetech/A20T/Configuration.h b/config/examples/Geeetech/A20T/Configuration.h deleted file mode 100644 index 7cb09d6b18..0000000000 --- a/config/examples/Geeetech/A20T/Configuration.h +++ /dev/null @@ -1,2214 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 115200 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_GT2560_V3_A20 -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Geeetech A20M" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 3 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - #define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - #define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // A20M [@thinkyhead] - #define DEFAULT_Kp 45.80 - #define DEFAULT_Ki 3.61 - #define DEFAULT_Kd 145.39 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - // MeCreator2 generated by Autotune - #define DEFAULT_bedKp 182.46 // 175.68 189.95 - #define DEFAULT_bedKi 35.92 // 34.59 37.40 - #define DEFAULT_bedKd 231.70 // 223.07 241.19 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 400 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 430 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.4 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.04 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -#define PROBE_MANUALLY -#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { -37, 0, -3.6 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 3 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 2 // Z Clearance between multiple probes -#define Z_AFTER_PROBING 3 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -5 -#define Z_PROBE_OFFSET_RANGE_MAX -0.2 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -#define DELAY_BEFORE_PROBING 100 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 255 -#define Y_BED_SIZE 255 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS -10 -#define Y_MIN_POS -5 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 250 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 3 - #define FIL_RUNOUT_PIN 66 - #define FIL_RUNOUT2_PIN 67 - #define FIL_RUNOUT3_PIN 68 - #define FIL_RUNOUT_INVERTING true // Set to true to invert the logic of the sensors. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - #define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 5 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -#define LCD_BED_LEVELING -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - #define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (80*60) -#define HOMING_FEEDRATE_Z (20*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 190 -#define PREHEAT_1_TEMP_BED 60 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 90 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { 3, (Y_MAX_POS - 3), 10 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -#define ENCODER_PULSES_PER_STEP 2 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER -#define ST7920_DELAY_1 DELAY_NS(125) -#define ST7920_DELAY_2 DELAY_NS(125) -#define ST7920_DELAY_3 DELAY_NS(125) - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Geeetech/A20T/Configuration_adv.h b/config/examples/Geeetech/A20T/Configuration_adv.h deleted file mode 100644 index 99a780eae5..0000000000 --- a/config/examples/Geeetech/A20T/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - #define BLTOUCH_DELAY 200 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - #define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 10 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 50 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - #define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - #define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 180000 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G27" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - #define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - #define POWER_LOSS_PIN 69 // Pin to detect power loss - #define POWER_LOSS_STATE LOW // State of pin indicating power loss - #define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - #define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK true // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - #define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - //#define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - #define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - #define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - #define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - #define STATUS_HEAT_PERCENT // Show heating in a progress bar - #define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - #define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - #define MARLIN_BRICKOUT - #define MARLIN_INVADERS - #define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 5 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - #define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 400 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 400 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Geeetech/A30/Configuration.h b/config/examples/Geeetech/A30/Configuration.h deleted file mode 100644 index 4b85a1c02f..0000000000 --- a/config/examples/Geeetech/A30/Configuration.h +++ /dev/null @@ -1,2214 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 1 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_GTM32_MINI_A30 -#endif - -// Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 5 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 5 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 0 -#define HEATER_1_MINTEMP 0 -#define HEATER_2_MINTEMP 0 -#define HEATER_3_MINTEMP 0 -#define HEATER_4_MINTEMP 0 -#define HEATER_5_MINTEMP 0 -#define BED_MINTEMP 0 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - //FIND YOUR OWN: "M303 C8 S200 U" HOTEND PID - - #define DEFAULT_Kp 45.80 - #define DEFAULT_Ki 3.61 - #define DEFAULT_Kd 145.39 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - #define DEFAULT_bedKp 369.610 - #define DEFAULT_bedKi 54.132 - #define DEFAULT_bedKd 602.870 - - // FIND YOUR OWN: "M303 E-1 C8 S60" -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 100 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 1000 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 98 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 0 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED HOMING_FEEDRATE_XY - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR true -#define INVERT_E2_DIR true -#define INVERT_E3_DIR true -#define INVERT_E4_DIR true -#define INVERT_E5_DIR true - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -#define Z_HOMING_HEIGHT 5 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 320 -#define Y_BED_SIZE 320 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS -10 -#define Y_MIN_POS -5 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 420 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_PIN 66 - #define FIL_RUNOUT_INVERTING true // set to true to invert the logic of the sensors. - some of the geeetech filament sensors are false - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 5 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - #define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - #define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 0 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 5 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - #define UBL_Z_RAISE_WHEN_OFF_MESH 0 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 0 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 200 -#define PREHEAT_1_TEMP_BED 60 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 250 -#define PREHEAT_2_TEMP_BED 100 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 20), (Y_MIN_POS + 20),Z_MIN_POS + 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT -#define SDIO_SUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 50 -#define LCD_FEEDBACK_FREQUENCY_HZ 10 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER -//#define ST7920_DELAY_1 DELAY_NS(125) -//#define ST7920_DELAY_2 DELAY_NS(125) -//#define ST7920_DELAY_3 DELAY_NS(125) - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Geeetech/A30/Configuration_adv.h b/config/examples/Geeetech/A30/Configuration_adv.h deleted file mode 100644 index 74307076c9..0000000000 --- a/config/examples/Geeetech/A30/Configuration_adv.h +++ /dev/null @@ -1,2930 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - #define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - #define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 10 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 30000 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 5 -#define HOMING_BUMP_DIVISOR { 4, 4, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 2000 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - #define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - #define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - #define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - #define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. - unused by most slicers -#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 10 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 450 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 5 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 300 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 10 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 300 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 5 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 25 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 1 // (mm) Extra distance to prime nozzle after returning from park. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 20 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 10 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 60 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - #define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - #define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - #define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Geeetech/D200/Configuration.h b/config/examples/Geeetech/D200/Configuration.h deleted file mode 100644 index 343b212ed2..0000000000 --- a/config/examples/Geeetech/D200/Configuration.h +++ /dev/null @@ -1,2214 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 1 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_GTM32_MINI_A30 -#endif - -// Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 5 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 5 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 0 -#define HEATER_1_MINTEMP 0 -#define HEATER_2_MINTEMP 0 -#define HEATER_3_MINTEMP 0 -#define HEATER_4_MINTEMP 0 -#define HEATER_5_MINTEMP 0 -#define BED_MINTEMP 0 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - //FIND YOUR OWN: "M303 C8 S200 U" HOTEND PID - - #define DEFAULT_Kp 45.80 - #define DEFAULT_Ki 3.61 - #define DEFAULT_Kd 145.39 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - #define DEFAULT_bedKp 369.610 - #define DEFAULT_bedKi 54.132 - #define DEFAULT_bedKd 602.870 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 100 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 1000 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 98 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 0 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED HOMING_FEEDRATE_XY - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR true -#define INVERT_E2_DIR true -#define INVERT_E3_DIR true -#define INVERT_E4_DIR true -#define INVERT_E5_DIR true - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -#define Z_HOMING_HEIGHT 5 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 300 -#define Y_BED_SIZE 180 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 180 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_PIN 66 - #define FIL_RUNOUT_INVERTING true // set to true to invert the logic of the sensors. - some of the geeetech filament sensors are false - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 5 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - #define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - #define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 0 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 5 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - #define UBL_Z_RAISE_WHEN_OFF_MESH 0 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 0 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 200 -#define PREHEAT_1_TEMP_BED 60 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 250 -#define PREHEAT_2_TEMP_BED 100 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 20), (Y_MIN_POS + 20),Z_MIN_POS + 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT -#define SDIO_SUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 50 -#define LCD_FEEDBACK_FREQUENCY_HZ 10 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER -//#define ST7920_DELAY_1 DELAY_NS(125) -//#define ST7920_DELAY_2 DELAY_NS(125) -//#define ST7920_DELAY_3 DELAY_NS(125) - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Geeetech/D200/Configuration_adv.h b/config/examples/Geeetech/D200/Configuration_adv.h deleted file mode 100644 index a224e65e39..0000000000 --- a/config/examples/Geeetech/D200/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - #define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - #define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 10 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 30000 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 5 -#define HOMING_BUMP_DIVISOR { 4, 4, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 2000 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - #define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - #define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - #define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - #define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. - unused by most slicers -#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 10 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 450 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 5 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 300 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 10 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 300 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 5 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 25 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 1 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 20 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 10 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 60 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - #define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - #define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - #define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Geeetech/E180/Configuration.h b/config/examples/Geeetech/E180/Configuration.h deleted file mode 100644 index 65d6c6f4b3..0000000000 --- a/config/examples/Geeetech/E180/Configuration.h +++ /dev/null @@ -1,2215 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 1 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_GTM32_MINI -#endif - -// Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 0 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 5 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 5 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 0 -#define HEATER_1_MINTEMP 0 -#define HEATER_2_MINTEMP 0 -#define HEATER_3_MINTEMP 0 -#define HEATER_4_MINTEMP 0 -#define HEATER_5_MINTEMP 0 -#define BED_MINTEMP 0 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - //FIND YOUR OWN: "M303 C8 S200 U" HOTEND PID - - #define DEFAULT_Kp 45.80 - #define DEFAULT_Ki 3.61 - #define DEFAULT_Kd 145.39 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - // FIND YOUR OWN: "M303 E-1 C8 S60" -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 100 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 1000 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_ZMAX_PLUG -#define USE_XMIN_PLUG -#define USE_YMAX_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 98 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 0 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED HOMING_FEEDRATE_XY - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR true -#define INVERT_E2_DIR true -#define INVERT_E3_DIR true -#define INVERT_E4_DIR true -#define INVERT_E5_DIR true - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -#define Z_HOMING_HEIGHT 5 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR 1 -#define Z_HOME_DIR 1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 130 -#define Y_BED_SIZE 130 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 130 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_PIN 66 - #define FIL_RUNOUT_INVERTING true // Set to true to invert the logic of the sensors. (Some Geeetech filament sensors are false) - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 5 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - #define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - #define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 0 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 5 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - #define UBL_Z_RAISE_WHEN_OFF_MESH 0 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 0 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 200 -#define PREHEAT_1_TEMP_BED 60 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 250 -#define PREHEAT_2_TEMP_BED 100 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 20), (Y_MIN_POS + 20),Z_MIN_POS + 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT -#define SDIO_SUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 50 -#define LCD_FEEDBACK_FREQUENCY_HZ 10 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER -//#define ST7920_DELAY_1 DELAY_NS(125) -//#define ST7920_DELAY_2 DELAY_NS(125) -//#define ST7920_DELAY_3 DELAY_NS(125) - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Geeetech/E180/Configuration_adv.h b/config/examples/Geeetech/E180/Configuration_adv.h deleted file mode 100644 index 74307076c9..0000000000 --- a/config/examples/Geeetech/E180/Configuration_adv.h +++ /dev/null @@ -1,2930 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - #define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - #define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 10 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 30000 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 5 -#define HOMING_BUMP_DIVISOR { 4, 4, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 2000 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - #define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - #define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - #define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - #define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. - unused by most slicers -#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 10 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 450 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 5 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 300 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 10 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 300 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 5 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 25 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 1 // (mm) Extra distance to prime nozzle after returning from park. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 20 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 10 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 60 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - #define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - #define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - #define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Geeetech/GT2560/Configuration.h b/config/examples/Geeetech/GT2560/Configuration.h deleted file mode 100644 index 17e49e8f4d..0000000000 --- a/config/examples/Geeetech/GT2560/Configuration.h +++ /dev/null @@ -1,2250 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_GT2560_REV_A -#endif - -// Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // Geeetech MK8 Extruder - #define DEFAULT_Kp 12.33 - #define DEFAULT_Ki 0.51 - #define DEFAULT_Kd 74.50 - - // CTC MK8 Extruder - //#define DEFAULT_Kp 19.86 - //#define DEFAULT_Ki 1.0 - //#define DEFAULT_Kd 98.83 - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - //#define DEFAULT_Kp 22.2 - //#define DEFAULT_Ki 1.08 - //#define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //12v (120 watt?) MK2a PCB Heatbed into 4mm borosilicate (Geeetech Prusa i3 Pro, Pro/B/C/X) - #define DEFAULT_bedKp 234.88 - #define DEFAULT_bedKi 42.79 - #define DEFAULT_bedKd 322.28 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - //#define DEFAULT_bedKp 10.00 - //#define DEFAULT_bedKi .023 - //#define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 78.74, 78.74, 2560, 105 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 400, 400, 2, 45 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 5000, 5000, 50, 5000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 4.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.04 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR true -#define INVERT_E2_DIR true -#define INVERT_E3_DIR true -#define INVERT_E4_DIR true -#define INVERT_E5_DIR true - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -//#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -/** - * Customize common displays for GT2560 - */ -#if ANY(ULTIMAKERCONTROLLER, REPRAP_DISCOUNT_SMART_CONTROLLER, G3D_PANEL, MKS_MINI_12864) - #define SDSUPPORT // Force SD Card support on for these displays -#elif DISABLED(LIGHTWEIGHT_UI) - #define LCD_WIDTH 20 // Default is 22. For this Geeetech use 20. -#endif - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h b/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h deleted file mode 100644 index a36e0a1aa1..0000000000 --- a/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h +++ /dev/null @@ -1,2226 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(R. de Weerd, I3 Pro X)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_GT2560_REV_A_PLUS -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "RdW i3 Pro X" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - #define DEFAULT_Kp 22.2 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 300 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 2560, 93 } // MXL, Z M8=1.25, MK8 - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 400, 400, 2, 45 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 4000, 4000, 40, 4000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 5.0 - #define DEFAULT_YJERK 5.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 4.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.01 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 1 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 10, 90 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 8 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 6 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 6 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -#define Z_HOMING_HEIGHT 8 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 205 -#define Y_BED_SIZE 230 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 170 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 4 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 215 -#define PREHEAT_2_TEMP_BED 105 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 -#define LCD_FEEDBACK_FREQUENCY_HZ 1000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -#define NUM_SERVOS 1 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Geeetech/M201/Configuration.h b/config/examples/Geeetech/M201/Configuration.h deleted file mode 100644 index 7d5871a80c..0000000000 --- a/config/examples/Geeetech/M201/Configuration.h +++ /dev/null @@ -1,2214 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 1 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_GTM32_REV_B -#endif - -// Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 5 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 5 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 0 -#define HEATER_1_MINTEMP 0 -#define HEATER_2_MINTEMP 0 -#define HEATER_3_MINTEMP 0 -#define HEATER_4_MINTEMP 0 -#define HEATER_5_MINTEMP 0 -#define BED_MINTEMP 0 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - //FIND YOUR OWN: "M303 C8 S200 U" HOTEND PID - - #define DEFAULT_Kp 22.2 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 100 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 1000 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 98 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 0 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED HOMING_FEEDRATE_XY - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR true -#define INVERT_E2_DIR true -#define INVERT_E3_DIR true -#define INVERT_E4_DIR true -#define INVERT_E5_DIR true - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -#define Z_HOMING_HEIGHT 5 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 280 -#define Y_BED_SIZE 220 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 160 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_PIN 66 - #define FIL_RUNOUT_INVERTING true // set to true to invert the logic of the sensors. - some of the geeetech filament sensors are false - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 5 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - #define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - #define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 0 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 5 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - #define UBL_Z_RAISE_WHEN_OFF_MESH 0 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 0 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 200 -#define PREHEAT_1_TEMP_BED 60 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 250 -#define PREHEAT_2_TEMP_BED 100 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 20), (Y_MIN_POS + 20),Z_MIN_POS + 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT -#define SDIO_SUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 50 -#define LCD_FEEDBACK_FREQUENCY_HZ 10 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER -//#define ST7920_DELAY_1 DELAY_NS(125) -//#define ST7920_DELAY_2 DELAY_NS(125) -//#define ST7920_DELAY_3 DELAY_NS(125) - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Geeetech/M201/Configuration_adv.h b/config/examples/Geeetech/M201/Configuration_adv.h deleted file mode 100644 index a224e65e39..0000000000 --- a/config/examples/Geeetech/M201/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - #define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - #define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 10 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 30000 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 5 -#define HOMING_BUMP_DIVISOR { 4, 4, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 2000 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - #define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - #define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - #define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - #define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. - unused by most slicers -#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 10 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 450 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 5 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 300 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 10 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 300 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 5 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 25 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 1 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 20 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 10 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 60 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - #define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - #define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - #define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Geeetech/MeCreator2/Configuration.h b/config/examples/Geeetech/MeCreator2/Configuration.h deleted file mode 100644 index 89003c998c..0000000000 --- a/config/examples/Geeetech/MeCreator2/Configuration.h +++ /dev/null @@ -1,2233 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(Phr3d13, MeCreator2)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_GT2560_V3_MC2 -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "MeCreator2" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // MeCreator2 -#define DEFAULT_Kp 11.93 -#define DEFAULT_Ki 0.59 -#define DEFAULT_Kd 59.89 - // Ultimaker -// #define DEFAULT_Kp 22.2 -// #define DEFAULT_Ki 1.08 -// #define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. -//MeCreator2 generated by Autotune - #define DEFAULT_bedKp 182.46 // 175.68 189.95 - #define DEFAULT_bedKi 35.92 // 34.59 37.40 - #define DEFAULT_bedKd 231.70 // 223.07 241.19 - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) -//#define DEFAULT_bedKp 10.00 -//#define DEFAULT_bedKi .023 -//#define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 500 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -//#define USE_XMIN_PLUG -//#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -#define USE_XMAX_PLUG -#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 95 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 250, 250, 400, 45 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 2000, 2000, 100, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 2000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 2000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 2 - #define DEFAULT_YJERK 2 - #define DEFAULT_ZJERK 0.6 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 50.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.001 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR true -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR 1 -#define Y_HOME_DIR 1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 160 -#define Y_BED_SIZE 160 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS -15 -#define Y_MIN_POS -5 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 162 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (40*60) -#define HOMING_FEEDRATE_Z (12*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 190 -#define PREHEAT_1_TEMP_BED 60 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 100 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/config/examples/Geeetech/MeCreator2/Configuration_adv.h deleted file mode 100644 index dec4ee4c94..0000000000 --- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h +++ /dev/null @@ -1,2930 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - #define CASE_LIGHT_PIN 6 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - #define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -//#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.05 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Geeetech/PI3A PRO/Configuration.h b/config/examples/Geeetech/PI3A PRO/Configuration.h deleted file mode 100644 index 6df5557a96..0000000000 --- a/config/examples/Geeetech/PI3A PRO/Configuration.h +++ /dev/null @@ -1,2247 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(default config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_GT2560_REV_A_PLUS -#endif - -// Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 125 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // Geeetech MK8 Extruder - #define DEFAULT_Kp 22.2 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114 - - - // CTC MK8 Extruder - //#define DEFAULT_Kp 19.86 - //#define DEFAULT_Ki 1.0 - //#define DEFAULT_Kd 98.83 - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - //#define DEFAULT_Kp 22.2 - //#define DEFAULT_Ki 1.08 - //#define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //12v (120 watt?) MK2a PCB Heatbed into 4mm borosilicate (Geeetech Prusa i3 Pro, Pro/B/C/X) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - //#define DEFAULT_bedKp 10.00 - //#define DEFAULT_bedKi .023 - //#define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 100 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 1000 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define PRO_B_WITH_LEADSCREW -#if ENABLED(PRO_A_WITH_LEADSCREW) // M8 leadscrew version - #define DEFAULT_AXIS_STEPS_PER_UNIT { 78.74, 78.74, 400, 105 } -#else // M8 threaded rod version - #define DEFAULT_AXIS_STEPS_PER_UNIT { 78.74, 78.74, 2560, 105 } -#endif - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 400, 400, 2, 45 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 5000, 5000, 75, 5000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.04 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -#define PROBE_MANUALLY -#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST (20*60) - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR true -#define INVERT_E2_DIR true -#define INVERT_E3_DIR true -#define INVERT_E4_DIR true -#define INVERT_E5_DIR true - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 220 -#define Y_BED_SIZE 220 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS (-X_MIN_POS+X_BED_SIZE) -#define Y_MAX_POS (-Y_MIN_POS+Y_BED_SIZE) -#define Z_MAX_POS 200 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING true // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 4 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - #define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 0 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 5 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - #define UBL_Z_RAISE_WHEN_OFF_MESH 0 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (40*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 281.8196945719 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - //#define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - #define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 200 -#define PREHEAT_1_TEMP_BED 60 -#define PREHEAT_1_FAN_SPEED 170 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 170 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h deleted file mode 100644 index 5b1e5e4444..0000000000 --- a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -//#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G27" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h deleted file mode 100644 index a0f95d39e2..0000000000 --- a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h +++ /dev/null @@ -1,2247 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(1138-4EB, Geeetech Prusa i3 Pro B BLTouch config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_GT2560_REV_A_PLUS -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "i3 Pro B" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 125 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // Geeetech MK8 Extruder - #define DEFAULT_Kp 12.33 - #define DEFAULT_Ki 0.51 - #define DEFAULT_Kd 74.50 - - // CTC MK8 Extruder - //#define DEFAULT_Kp 19.86 - //#define DEFAULT_Ki 1.0 - //#define DEFAULT_Kd 98.83 - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - //#define DEFAULT_Kp 22.2 - //#define DEFAULT_Ki 1.08 - //#define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //12v (120 watt?) MK2a PCB Heatbed into 4mm borosilicate (Geeetech Prusa i3 Pro, Pro/B/C/X) - #define DEFAULT_bedKp 234.88 - #define DEFAULT_bedKi 42.79 - #define DEFAULT_bedKd 322.28 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - //#define DEFAULT_bedKp 10.00 - //#define DEFAULT_bedKi .023 - //#define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define PRO_B_WITH_LEADSCREW -#if ENABLED(PRO_B_WITH_LEADSCREW) // M8 leadscrew version - #define DEFAULT_AXIS_STEPS_PER_UNIT { 78.74, 78.74, 400, 105 } -#else // M8 threaded rod version - #define DEFAULT_AXIS_STEPS_PER_UNIT { 78.74, 78.74, 2560, 105 } -#endif - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 400, 400, 2, 45 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 5000, 5000, 75, 5000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.04 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default -#define Z_MIN_PROBE_PIN 32 - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 4, -44, -1.4 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST (20*60) - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -#define MULTIPLE_PROBING 3 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR true -#define INVERT_E2_DIR true -#define INVERT_E3_DIR true -#define INVERT_E4_DIR true -#define INVERT_E5_DIR true - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS -12 -#define Y_MIN_POS -8 -#define Z_MIN_POS 0 -#define X_MAX_POS (-X_MIN_POS+X_BED_SIZE) -#define Y_MAX_POS (-Y_MIN_POS+Y_BED_SIZE) -#define Z_MAX_POS 200 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 4 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - #define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 281.8196945719 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - //#define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - #define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 200 -#define PREHEAT_1_TEMP_BED 60 -#define PREHEAT_1_FAN_SPEED 170 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 170 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/README.md b/config/examples/Geeetech/Prusa i3 Pro B/bltouch/README.md deleted file mode 100644 index 30fcf2e443..0000000000 --- a/config/examples/Geeetech/Prusa i3 Pro B/bltouch/README.md +++ /dev/null @@ -1,54 +0,0 @@ -These are example configurations for the low-cost [Acrylic Prusa I3 pro B 3D Printer DIY kit](http://www.geeetech.com/acrylic-geeetech-prusa-i3-pro-b-3d-printer-diy-kit-p-917.html) and the [3DTouch auto bed leveling sensor](http://www.geeetech.com/geeetech-3dtouch-auto-bed-leveling-sensor-for-3d-printer-p-1010.html) based on: - -- `../GT2560/` -- [Marlin 1.1.4 With 3DTouch / BLTouch for i3 Pro B](https://www.geeetech.com/forum/viewtopic.php?t=19846) - -The main characteristics of these configurations are: - -- The defined motherboard is `BOARD_GT2560_REV_A_PLUS`. -- Travel limits are adjusted to the printer bed size and position. -- An example `SKEW_CORRECTION` for a particular printer is enabled. See comments below about how to adjust it to a particular printer. -- Using the LCD controller for bed leveling is enabled. - - `PROBE_MANUALLY` is enabled, which *provides a means to do "Auto" Bed Leveling without a probe*. - - The `LEVEL_BED_CORNERS` option for manual bed adjustment is enabled. - - Bilinear bed leveling is enabled, the boundaries for probing are adjusted to the glass size, and extrapolation is enabled. -- `PRINTCOUNTER` is enabled, in order to track statistical data. -- `INDIVIDUAL_AXIS_HOMING_MENU` is enabled, which adds individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -- The speaker is enabled for the UI feedback. -- `bltouch` variant: - - `USE_ZMAX_PLUG` is enabled. See comments about connections below. - - Heaters and fans are turned off when probing. - - Multiple probing is set to 3. - -# First-time configuration - -## Skew factor - -The skew factor must be adjusted for each printer: - -- First, uncomment `#define XY_SKEW_FACTOR 0.0`, compile and upload the firmware. -- Then, print [YACS (Yet Another Calibration Square)](https://www.thingiverse.com/thing:2563185). Hint, scale it considering a margin for brim (if used). The larger, the better to make error measurements. -- Measure the printed part according to the comments in the example configuration file, and set `XY_DIAG_AC`, `XY_DIAG_BD` and `Y_SIDE_AD`. -- Last, comment `#define XY_SKEW_FACTOR 0.0` again, compile and upload. - -## 3DTouch auto leveling sensor - -- Print a suitable mount to attach the sensor to the printer. The example configuration file is adjusted to http://www.geeetech.com/wiki/images/6/61/3DTouch_auto_leveling_sensor-1.zip -- Unlike suggested in [geeetech.com/wiki/index.php/3DTouch_Auto_Leveling_Sensor](https://www.geeetech.com/wiki/index.php/3DTouch_Auto_Leveling_Sensor), the existing end stop switch is expected to be kept connected to Z_MIN. So, the sensor is to be connected to Z_MAX, according to Marlin's default settings. Furthermore, GT2560-A+ provides a connector for the servo next to thermistor connectors (see [GT2560](https://www.geeetech.com/wiki/images/thumb/4/45/GT2560_wiring.jpg/700px-GT2560_wiring.jpg) and [GT2560-A+](http://i.imgur.com/E0t34VU.png)). -- Be careful to respect the polarity of the sensor when connecting it to the GT2560-A+. Unlike end stops, reversing the connection will prevent the sensor from working properly. -- [Test](http://www.geeetech.com/wiki/index.php/3DTouch_Auto_Leveling_Sensor#Testing) and [calibrate](https://www.geeetech.com/wiki/index.php/3DTouch_Auto_Leveling_Sensor#Calibration) the sensor. -- If using the GT2560-A+ and with the sensor connected to Z_MAX and an endstop connected to Z_MIN use the following calibration routine instead. - -## 3DTouch Calibration with Z_MAX - -- Home the printer with `G28` command. -- Disable the Z axis software endstop with `M211 S0 Z0` -- Reset the probe Z_OFFSET with `M851 Z0` -- Move to the center of the bed with `G1 X100 Y100` -- Move Z incrementally until the nozzle is the correct height from the bed using a shim or piece of paper, record this Z movement, for example -0.2. -- Do a single probe at the current point in the middle of the bed using `G30` and not the returned value, for example 1.9. Invert this value, i.e. -1.9, and add it to the Z offset above, i.e. -0.2 in this example giving -2.1. -- Update the probe Z_OFFSET to this value using `M851` i.e. `M851 Z-2.1`. -- Re-enable software end-stops with `M211 S1 Z0` -- Save this value to the EEPROM with `M500`. -- Update the start G-Code in your slicer software to insert a `G29` after the last `G28`. -- Carefully test that the offset is correct in the first print. diff --git a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h deleted file mode 100644 index 53fb87f01d..0000000000 --- a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h +++ /dev/null @@ -1,2246 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(1138-4EB, Geeetech Prusa i3 Pro B config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_GT2560_REV_A_PLUS -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "i3 Pro B" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 125 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // Geeetech MK8 Extruder - #define DEFAULT_Kp 12.33 - #define DEFAULT_Ki 0.51 - #define DEFAULT_Kd 74.50 - - // CTC MK8 Extruder - //#define DEFAULT_Kp 19.86 - //#define DEFAULT_Ki 1.0 - //#define DEFAULT_Kd 98.83 - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - //#define DEFAULT_Kp 22.2 - //#define DEFAULT_Ki 1.08 - //#define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //12v (120 watt?) MK2a PCB Heatbed into 4mm borosilicate (Geeetech Prusa i3 Pro, Pro/B/C/X) - #define DEFAULT_bedKp 234.88 - #define DEFAULT_bedKi 42.79 - #define DEFAULT_bedKd 322.28 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - //#define DEFAULT_bedKp 10.00 - //#define DEFAULT_bedKi .023 - //#define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define PRO_B_WITH_LEADSCREW -#if ENABLED(PRO_B_WITH_LEADSCREW) // M8 leadscrew version - #define DEFAULT_AXIS_STEPS_PER_UNIT { 78.74, 78.74, 400, 105 } -#else // M8 threaded rod version - #define DEFAULT_AXIS_STEPS_PER_UNIT { 78.74, 78.74, 2560, 105 } -#endif - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 400, 400, 2, 45 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 5000, 5000, 75, 5000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.04 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST (20*60) - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR true -#define INVERT_E2_DIR true -#define INVERT_E3_DIR true -#define INVERT_E4_DIR true -#define INVERT_E5_DIR true - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS -12 -#define Y_MIN_POS -8 -#define Z_MIN_POS 0 -#define X_MAX_POS (-X_MIN_POS+X_BED_SIZE) -#define Y_MAX_POS (-Y_MIN_POS+Y_BED_SIZE) -#define Z_MAX_POS 200 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 4 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - #define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 281.8196945719 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - //#define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - #define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 200 -#define PREHEAT_1_TEMP_BED 60 -#define PREHEAT_1_FAN_SPEED 170 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 170 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/README.md b/config/examples/Geeetech/Prusa i3 Pro B/noprobe/README.md deleted file mode 100644 index 30fcf2e443..0000000000 --- a/config/examples/Geeetech/Prusa i3 Pro B/noprobe/README.md +++ /dev/null @@ -1,54 +0,0 @@ -These are example configurations for the low-cost [Acrylic Prusa I3 pro B 3D Printer DIY kit](http://www.geeetech.com/acrylic-geeetech-prusa-i3-pro-b-3d-printer-diy-kit-p-917.html) and the [3DTouch auto bed leveling sensor](http://www.geeetech.com/geeetech-3dtouch-auto-bed-leveling-sensor-for-3d-printer-p-1010.html) based on: - -- `../GT2560/` -- [Marlin 1.1.4 With 3DTouch / BLTouch for i3 Pro B](https://www.geeetech.com/forum/viewtopic.php?t=19846) - -The main characteristics of these configurations are: - -- The defined motherboard is `BOARD_GT2560_REV_A_PLUS`. -- Travel limits are adjusted to the printer bed size and position. -- An example `SKEW_CORRECTION` for a particular printer is enabled. See comments below about how to adjust it to a particular printer. -- Using the LCD controller for bed leveling is enabled. - - `PROBE_MANUALLY` is enabled, which *provides a means to do "Auto" Bed Leveling without a probe*. - - The `LEVEL_BED_CORNERS` option for manual bed adjustment is enabled. - - Bilinear bed leveling is enabled, the boundaries for probing are adjusted to the glass size, and extrapolation is enabled. -- `PRINTCOUNTER` is enabled, in order to track statistical data. -- `INDIVIDUAL_AXIS_HOMING_MENU` is enabled, which adds individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -- The speaker is enabled for the UI feedback. -- `bltouch` variant: - - `USE_ZMAX_PLUG` is enabled. See comments about connections below. - - Heaters and fans are turned off when probing. - - Multiple probing is set to 3. - -# First-time configuration - -## Skew factor - -The skew factor must be adjusted for each printer: - -- First, uncomment `#define XY_SKEW_FACTOR 0.0`, compile and upload the firmware. -- Then, print [YACS (Yet Another Calibration Square)](https://www.thingiverse.com/thing:2563185). Hint, scale it considering a margin for brim (if used). The larger, the better to make error measurements. -- Measure the printed part according to the comments in the example configuration file, and set `XY_DIAG_AC`, `XY_DIAG_BD` and `Y_SIDE_AD`. -- Last, comment `#define XY_SKEW_FACTOR 0.0` again, compile and upload. - -## 3DTouch auto leveling sensor - -- Print a suitable mount to attach the sensor to the printer. The example configuration file is adjusted to http://www.geeetech.com/wiki/images/6/61/3DTouch_auto_leveling_sensor-1.zip -- Unlike suggested in [geeetech.com/wiki/index.php/3DTouch_Auto_Leveling_Sensor](https://www.geeetech.com/wiki/index.php/3DTouch_Auto_Leveling_Sensor), the existing end stop switch is expected to be kept connected to Z_MIN. So, the sensor is to be connected to Z_MAX, according to Marlin's default settings. Furthermore, GT2560-A+ provides a connector for the servo next to thermistor connectors (see [GT2560](https://www.geeetech.com/wiki/images/thumb/4/45/GT2560_wiring.jpg/700px-GT2560_wiring.jpg) and [GT2560-A+](http://i.imgur.com/E0t34VU.png)). -- Be careful to respect the polarity of the sensor when connecting it to the GT2560-A+. Unlike end stops, reversing the connection will prevent the sensor from working properly. -- [Test](http://www.geeetech.com/wiki/index.php/3DTouch_Auto_Leveling_Sensor#Testing) and [calibrate](https://www.geeetech.com/wiki/index.php/3DTouch_Auto_Leveling_Sensor#Calibration) the sensor. -- If using the GT2560-A+ and with the sensor connected to Z_MAX and an endstop connected to Z_MIN use the following calibration routine instead. - -## 3DTouch Calibration with Z_MAX - -- Home the printer with `G28` command. -- Disable the Z axis software endstop with `M211 S0 Z0` -- Reset the probe Z_OFFSET with `M851 Z0` -- Move to the center of the bed with `G1 X100 Y100` -- Move Z incrementally until the nozzle is the correct height from the bed using a shim or piece of paper, record this Z movement, for example -0.2. -- Do a single probe at the current point in the middle of the bed using `G30` and not the returned value, for example 1.9. Invert this value, i.e. -1.9, and add it to the Z offset above, i.e. -0.2 in this example giving -2.1. -- Update the probe Z_OFFSET to this value using `M851` i.e. `M851 Z-2.1`. -- Re-enable software end-stops with `M211 S1 Z0` -- Save this value to the EEPROM with `M500`. -- Update the start G-Code in your slicer software to insert a `G29` after the last `G28`. -- Carefully test that the offset is correct in the first print. diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h deleted file mode 100644 index 79b3234d0f..0000000000 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h +++ /dev/null @@ -1,2226 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(Phr3d13, default config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_GT2560_REV_A -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "i3 Pro C" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 2 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -#define HOTEND_OFFSET_X { 0.0, 32.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 1 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - #define DEFAULT_Kp 22.2 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 2560, 95, 95 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR false -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 180 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 200 -#define PREHEAT_1_TEMP_BED 65 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 235 -#define PREHEAT_2_TEMP_BED 95 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h deleted file mode 100644 index f41bcc8a7a..0000000000 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - #define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G27" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h deleted file mode 100644 index 066811487a..0000000000 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h +++ /dev/null @@ -1,2226 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(Phr3d13, default config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_GT2560_REV_A_PLUS -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "i3 Pro W" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 32.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - #define DEFAULT_Kp 22.2 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 2560, 95 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 180 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 200 -#define PREHEAT_1_TEMP_BED 65 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 235 -#define PREHEAT_2_TEMP_BED 95 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h deleted file mode 100644 index f41bcc8a7a..0000000000 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - #define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G27" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/HMS434/Configuration.h b/config/examples/HMS434/Configuration.h deleted file mode 100644 index 43cd5c8e5d..0000000000 --- a/config/examples/HMS434/Configuration.h +++ /dev/null @@ -1,2215 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(Scheepers, MaukCC)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_CNCONTROLS_15 -#endif - -// Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -#define MACHINE_UUID "75083866-86ea-42b2-b475-7b3a7855e716" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 -1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 331 -#define TEMP_SENSOR_CHAMBER 331 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 410 -#define HEATER_1_MAXTEMP 410 -#define HEATER_2_MAXTEMP 410 -#define HEATER_3_MAXTEMP 410 -#define HEATER_4_MAXTEMP 410 -#define HEATER_5_MAXTEMP 410 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX 170 // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 20 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - #define DEFAULT_Kp 11.3 - #define DEFAULT_Ki 0.61 - #define DEFAULT_Kd 52.77 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 18 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 53.45, 71.19, 160, 169.05 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 1000, 1000, 40, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { -21, 22, -1.54 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 20 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 12000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST 900 - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW 100 - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 1 // Z Clearance between multiple probes -#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR false -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 450 -#define Y_BED_SIZE 325 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS -72 -#define Y_MIN_POS -84 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 400 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 5 - #define GRID_MAX_POINTS_Y 3 - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (6000) -#define HOMING_FEEDRATE_Z (900) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { 225, -50, 5 } - #define NOZZLE_PARK_XY_FEEDRATE 150 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 15 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 4 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 2 - - // Specify positions as { X, Y, Z } . Leave Z blank to not change the Z position - #define NOZZLE_CLEAN_START_POINT { -37, -67, } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 8 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - #define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/HMS434/Configuration_adv.h b/config/examples/HMS434/Configuration_adv.h deleted file mode 100644 index bcd4e29e95..0000000000 --- a/config/examples/HMS434/Configuration_adv.h +++ /dev/null @@ -1,2923 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 18 - #define CHAMBER_MAXTEMP 75 - #define TEMP_CHAMBER_HYSTERESIS 2 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 900 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 900 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 2.0 // compensate for 3V3 ref voltage -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 35 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 28 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 16 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 16 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.02 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 8 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 8 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 32 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - #define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 30 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 30 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 0 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - #define SERVICE_NAME_1 "Lubricate axis" - #define SERVICE_INTERVAL_1 100 // print hours - #define SERVICE_NAME_2 "Change X an Y belt" - #define SERVICE_INTERVAL_2 300 // print hours - #define SERVICE_NAME_3 "Change Z belt" - #define SERVICE_INTERVAL_3 1000 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Infitary/i3-M508/Configuration.h b/config/examples/Infitary/i3-M508/Configuration.h deleted file mode 100644 index e49da86312..0000000000 --- a/config/examples/Infitary/i3-M508/Configuration.h +++ /dev/null @@ -1,2230 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(tjclement, Infitary M508)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_13_EFB -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Infitary M508" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 125 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - //#define DEFAULT_Kp 22.2 - //#define DEFAULT_Ki 1.08 - //#define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - - #define DEFAULT_Kp 213.2 - #define DEFAULT_Ki 1.54 - #define DEFAULT_Kd 765 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 400, 92.6 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 400, 400, 5, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 205 -#define Y_BED_SIZE 205 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 185 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 200 -#define PREHEAT_1_TEMP_BED 50 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 245 -#define PREHEAT_2_TEMP_BED 100 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Infitary/i3-M508/Configuration_adv.h b/config/examples/Infitary/i3-M508/Configuration_adv.h deleted file mode 100644 index efd8a96068..0000000000 --- a/config/examples/Infitary/i3-M508/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 1 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -//#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -//#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -//#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/JGAurora/A1/Configuration.h b/config/examples/JGAurora/A1/Configuration.h deleted file mode 100644 index cf167f61d7..0000000000 --- a/config/examples/JGAurora/A1/Configuration.h +++ /dev/null @@ -1,2236 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 - -// ╦╔═╗╔═╗┬ ┬┬─┐┌─┐┬─┐┌─┐╔═╗┌─┐┬─┐┬ ┬┌┬┐ ┌─┐┌─┐┌┬┐ -// ║║ ╦╠═╣│ │├┬┘│ │├┬┘├─┤╠╣ │ │├┬┘│ ││││ │ │ ││││ -// ╚╝╚═╝╩ ╩└─┘┴└─└─┘┴└─┴ ┴╚ └─┘┴└─└─┘┴ ┴o└─┘└─┘┴ ┴ - -#define STRING_CONFIG_H_AUTHOR "(Roberto Mariani & Samuel Pinches)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 1 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_JGAURORA_A5S_A1 -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "JGAurora A1" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Tuned by Sam Pinches 18th March 2019, on A5S at 220C. -#define DEFAULT_Kp 32.73 -#define DEFAULT_Ki 3.68 -#define DEFAULT_Kd 72.83 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - - // Tuned by Sam Pinches on A5S at 75C (18th March, 2019) - #define DEFAULT_bedKp 175.83 - #define DEFAULT_bedKi 28.85 - #define DEFAULT_bedKd 267.90 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 1000 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -//#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 160, 160, 1600, 202 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 360, 150, 30, 40 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 1200, 350, 100, 500 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 13.0 - #define DEFAULT_YJERK 5.0 - #define DEFAULT_ZJERK 0.4 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 4) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR true -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR 1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 310 -#define Y_BED_SIZE 305 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS -10 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE+10 -#define Z_MAX_POS 310 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - #define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - #define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 5 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - #define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 5.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -#define MANUAL_X_HOME_POS X_MAX_POS -#define MANUAL_Y_HOME_POS -7 -#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (90*60) -#define HOMING_FEEDRATE_Z (12*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 205 -#define PREHEAT_1_TEMP_BED 58 -#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 245 -#define PREHEAT_2_TEMP_BED 105 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT -#define SDIO_SUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 2 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 2 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -#define FSMC_GRAPHICAL_TFT -//#define PRINTER_EVENT_LEDS - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 75 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 100 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 - #define XPT2046_Z1_THRESHOLD 1 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - #define RGB_LED_R_PIN 34 - #define RGB_LED_G_PIN 43 - #define RGB_LED_B_PIN 35 - #define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/JGAurora/A1/Configuration_adv.h b/config/examples/JGAurora/A1/Configuration_adv.h deleted file mode 100644 index b08bd3635a..0000000000 --- a/config/examples/JGAurora/A1/Configuration_adv.h +++ /dev/null @@ -1,2936 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -#define HEATER_BED_INVERTING 1 -#define HEATER_0_INVERTING 1 -// #define HEATER_1_INVERTING 0 -#define FAN_INVERTING 1 - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -#define FAN_MIN_PWM 30 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 5, 5, 5 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -#define HOMING_BACKOFF_MM { 1, 1, 0 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 60*60, 60*60, 10*60, 10*60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - #define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - //#define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - //#define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - #define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 25 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 25 - - #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - #define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 10 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - #define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 40 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 820 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 40 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 730 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 75 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/JGAurora/A5/Configuration.h b/config/examples/JGAurora/A5/Configuration.h deleted file mode 100644 index dd22fb8c8d..0000000000 --- a/config/examples/JGAurora/A5/Configuration.h +++ /dev/null @@ -1,2238 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * JGAurora A5 configuration - * Authors: Telli Mantelli, Kris Waclawski, Michael Gilardi & Samuel Pinches - */ - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(Telli Mantelli, Kris Waclawski, Samuel Pinches & Michael Gilardi, 21 Jan 2018)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_MKS_GEN_L -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "JGAurora A5" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 15 // manual calibration of thermistor in JGAurora A5 hotend -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 // measured to be satisfactorily accurate on center of bed within +/- 1 degC. -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 265 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 120 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - //#define DEFAULT_Kp 22.2 - //#define DEFAULT_Ki 1.08 - //#define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - - // JGAurora A5 (tuned at 210C) - #define DEFAULT_Kp 35.3//22.2 - #define DEFAULT_Ki 4.35//1.08 - #define DEFAULT_Kd 71.57//114 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - - // JGAurora A5 (tuned at 70C) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 1000 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 800, 100 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 500, 500, 15, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 1000, 500, 100, 5000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 800 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 800 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 8.0 - #define DEFAULT_YJERK 3.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.005 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR false -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 305 -#define Y_BED_SIZE 305 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS -5 // thanks DaHai. -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 320 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - #define G26_MESH_VALIDATION // Enable G26 mesh validation - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Defaultbed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 5 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 5 // As suggested by DaHai, https://www.youtube.com/watch?v=CBlADPgQqL0 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (80*60) -#define HOMING_FEEDRATE_Z (12*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 205 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h deleted file mode 100644 index 622399f34f..0000000000 --- a/config/examples/JGAurora/A5/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 90 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 10, 10, 6 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 80*60, 80*60, 12*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G27" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 5 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 5 - - #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 6 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - #define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/JGAurora/A5/README.md b/config/examples/JGAurora/A5/README.md deleted file mode 100644 index 861f276750..0000000000 --- a/config/examples/JGAurora/A5/README.md +++ /dev/null @@ -1,39 +0,0 @@ -# Configuration for JGAurora A5 printer - -## Firmware Installation Instructions - -To install custom firmware: - -- Download and install arduino IDE software from https://www.arduino.cc/en/Main/Software -- Plug in A5 to your computer via USB cable -- In arduino IDE, under the Tools menu, set: - – **Board** to "Arduino/Genuino Mega or Mega 2560" - – ***Processor*** to "Atmega 2560 (Mega 2560)" - – **Port** to your 3D printer’s serial port. To figure out the correct serial port unplug the printer and observe the "Port" menu. Connect the printer's USB cable, re-open the "Port" menu and see if a new ports has appeared. This new port is likely to be your printer. - - If you can’t find the right port or if your machine isn't detected, you may need to install a driver for the CH340 serial-to-USB interface chip in the printer. - - [macOS CH340 Serial Driver](http://sampin.ch/ch340-driver-mac) - - [Windows CH340 Serial Driver](https://sparks.gogo.co.nz/ch340.html) -- Install the u8glib library using the library manager in the menu "Sketch -> Include Library -> Manage Libraries." -- IMPORTANT: Unplug the 8-pin LCD panel header connector on your printer. The LCD should turn off completely. This is found underneath the LCD, and can be accessed from underneath the printer without removing any screws. Remember where it goes so you can put it back after flashing. -- Close all other programs (Cura, Repetier Host, JGCreat, etc.) that could connect to the serial port. -- Open the "Marlin.ino" file in Arduino IDE and wait for the new project window to appear. -- Select "Upload" from the "Sketch" menu or click the Upload button. -- Wait for the firmware to finish uploading and verifying. This may take a couple of minutes. -- Plug the LCD connector back in. -- In the Arduino IDE, select "Tools -> Serial monitor" to open up a simple console. In the popup menus, select "Newline" and a Baud Rate of "250000." -- In the input box, enter the following G-code commands: - - `M502` (press return) to reset settings (in RAM) to your configured defaults. - - `M500` (press return) to write settings and initialize the EEPROM. - -## Graphical Display - -The control panel included with the JGAurora interfaces only indirectly with Marlin, and this imposes some limitations. But you can use a RepRap Discount Full Graphic Smart Controller with the JGAurora A5 by applying the following additional settings in `Configuration.h`: - -```cpp -#define ENCODER_PULSES_PER_STEP 5 -#define ENCODER_STEPS_PER_MENU_ITEM 1 -#define REVERSE_ENCODER_DIRECTION -#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER -``` - -You may also be able to change `BEEPER_PIN` to use the piezo on the LCD controller instead of the one on the board. diff --git a/config/examples/JGAurora/A5S/Configuration.h b/config/examples/JGAurora/A5S/Configuration.h deleted file mode 100644 index 6b1835a874..0000000000 --- a/config/examples/JGAurora/A5S/Configuration.h +++ /dev/null @@ -1,2236 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 - -// ╦╔═╗╔═╗┬ ┬┬─┐┌─┐┬─┐┌─┐╔═╗┌─┐┬─┐┬ ┬┌┬┐ ┌─┐┌─┐┌┬┐ -// ║║ ╦╠═╣│ │├┬┘│ │├┬┘├─┤╠╣ │ │├┬┘│ ││││ │ │ ││││ -// ╚╝╚═╝╩ ╩└─┘┴└─└─┘┴└─┴ ┴╚ └─┘┴└─└─┘┴ ┴o└─┘└─┘┴ ┴ - -#define STRING_CONFIG_H_AUTHOR "(Roberto Mariani & Samuel Pinches)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 1 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_JGAURORA_A5S_A1 -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "JGAurora A5S" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Tuned by Sam Pinches 18th March 2019, on A5S at 220C. -#define DEFAULT_Kp 32.73 -#define DEFAULT_Ki 3.68 -#define DEFAULT_Kd 72.83 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - - // Tuned by Sam Pinches on A5S at 75C (18th March, 2019) - #define DEFAULT_bedKp 175.83 - #define DEFAULT_bedKi 28.85 - #define DEFAULT_bedKd 267.90 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 1000 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 160, 160, 1600, 202 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 360, 150, 30, 40 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 1200, 350, 100, 500 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 13.0 - #define DEFAULT_YJERK 5.0 - #define DEFAULT_ZJERK 0.4 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 4) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR false -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR true -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 310 -#define Y_BED_SIZE 310 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 330 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - #define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - #define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 5 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - #define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 5.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -#define MANUAL_X_HOME_POS -6 -#define MANUAL_Y_HOME_POS 0 -#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (90*60) -#define HOMING_FEEDRATE_Z (12*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 205 -#define PREHEAT_1_TEMP_BED 58 -#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 245 -#define PREHEAT_2_TEMP_BED 105 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT -#define SDIO_SUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 2 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 2 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -#define FSMC_GRAPHICAL_TFT -//#define PRINTER_EVENT_LEDS - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 75 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 100 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 - #define XPT2046_Z1_THRESHOLD 1 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - #define RGB_LED_R_PIN 34 - #define RGB_LED_G_PIN 43 - #define RGB_LED_B_PIN 35 - #define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/JGAurora/A5S/Configuration_adv.h b/config/examples/JGAurora/A5S/Configuration_adv.h deleted file mode 100644 index b08bd3635a..0000000000 --- a/config/examples/JGAurora/A5S/Configuration_adv.h +++ /dev/null @@ -1,2936 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -#define HEATER_BED_INVERTING 1 -#define HEATER_0_INVERTING 1 -// #define HEATER_1_INVERTING 0 -#define FAN_INVERTING 1 - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -#define FAN_MIN_PWM 30 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 5, 5, 5 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -#define HOMING_BACKOFF_MM { 1, 1, 0 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 60*60, 60*60, 10*60, 10*60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - #define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - //#define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - //#define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - #define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 25 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 25 - - #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - #define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 10 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - #define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 40 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 820 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 40 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 730 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 75 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/JGAurora/Magic/Configuration.h b/config/examples/JGAurora/Magic/Configuration.h deleted file mode 100644 index 9700100e0d..0000000000 --- a/config/examples/JGAurora/Magic/Configuration.h +++ /dev/null @@ -1,2226 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 115200 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "3D Printer" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 260 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 125 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - #define DEFAULT_Kp 22.2 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 1000 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - #define ENDSTOPPULLUP_XMAX - #define ENDSTOPPULLUP_YMAX - #define ENDSTOPPULLUP_ZMAX - #define ENDSTOPPULLUP_XMIN - #define ENDSTOPPULLUP_YMIN - #define ENDSTOPPULLUP_ZMIN - #define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 800, 88 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 300, 300, 100, 400 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 300 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 400 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 300 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { -25, 1, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 236 -#define Y_BED_SIZE 223 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS -16 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 250 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING true // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - //#define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - #define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 200 -#define PREHEAT_1_TEMP_BED 60 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS), (Y_MAX_POS), 10 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 50 -#define LCD_FEEDBACK_FREQUENCY_HZ 10 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/JGAurora/Magic/Configuration_adv.h b/config/examples/JGAurora/Magic/Configuration_adv.h deleted file mode 100644 index 446e0f0589..0000000000 --- a/config/examples/JGAurora/Magic/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G27" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 2000 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - #define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 100 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 600 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 20 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 40 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 60 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 460 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 10 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 20 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - #define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - #define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/MakerFarm/Pegasus_12/Configuration.h b/config/examples/MakerFarm/Pegasus_12/Configuration.h deleted file mode 100644 index da1f61dd71..0000000000 --- a/config/examples/MakerFarm/Pegasus_12/Configuration.h +++ /dev/null @@ -1,2231 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_13_EEB -#endif - -// Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 2 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -#define PSU_CONTROL -#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 5 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 5 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 5 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - #define DEFAULT_Kp 22.2 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) -//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) -// #define DEFAULT_bedKp 10.00 -// #define DEFAULT_bedKi .023 -// #define DEFAULT_bedKd 305.4 - -//120v 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) -//from pidautotune -// #define DEFAULT_bedKp 97.1 -// #define DEFAULT_bedKi 1.41 -// #define DEFAULT_bedKd 1675.16 - -//12v 8" Maker Farm Heat bed with 4mm Glass -//from pidautotune - #define DEFAULT_bedKp 644.48 - #define DEFAULT_bedKi 117.07 - #define DEFAULT_bedKd 886.96 - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 1000 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 -#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 510, 510 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 3, 30 } - -#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 6, 60 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } - -#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.01 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -#define PROBE_MANUALLY -#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { -5, -1, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 1 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED HOMING_FEEDRATE_XY - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -#define MULTIPLE_PROBING 3 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR false -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR true -#define INVERT_E2_DIR true -#define INVERT_E3_DIR true -#define INVERT_E4_DIR true -#define INVERT_E5_DIR true - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -#define Z_HOMING_HEIGHT 5 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 250 -#define Y_BED_SIZE 250 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 250 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - //#define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 5 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - #define UBL_Z_RAISE_WHEN_OFF_MESH 0 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - #define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 5.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (HOMING_FEEDRATE_Z*10) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 200 -#define PREHEAT_1_TEMP_BED 60 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 250 -#define PREHEAT_2_TEMP_BED 100 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS), (Y_MAX_POS), 5 } - #define NOZZLE_PARK_XY_FEEDRATE (HOMING_FEEDRATE_XY/60) // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE (HOMING_FEEDRATE_Z/60) // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 10 -#define LCD_FEEDBACK_FREQUENCY_HZ 50 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/MakerFarm/Pegasus_12/Configuration_adv.h b/config/examples/MakerFarm/Pegasus_12/Configuration_adv.h deleted file mode 100644 index dee11e9c6e..0000000000 --- a/config/examples/MakerFarm/Pegasus_12/Configuration_adv.h +++ /dev/null @@ -1,2928 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - #define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 10 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -#define MILLISECONDS_PREHEAT_TIME 30000 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 60 -#define DISABLE_INACTIVE_X false -#define DISABLE_INACTIVE_Y false -#define DISABLE_INACTIVE_Z false // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -#define XY_FREQUENCY_LIMIT 20 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 40 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - #define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - #define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -#define LCD_TIMEOUT_TO_STATUS 60000 - -// Add an 'M73' G-code to set the current percentage -#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - #define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - #define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - #define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 10000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 2500 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - #define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G27" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - #define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - #define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - #define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - #define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - #define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - #define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - #define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 2000 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - #define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - #define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#define BLOCK_BUFFER_SIZE (BUFSIZE*2) // SD,LCD,Buttons take more memory, block buffer needs to be smaller - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 8 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - #define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - #define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - #define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - #define CUSTOM_USER_MENU_TITLE "Tools" - //#define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - #define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Manual UBL" //Use nozzle & paper to setup UBL - #define USER_GCODE_1 "G28\nG29 P4 R999\nG29 A\nG29 S\nM500" - - #define USER_DESC_2 "Adjust Point Near" //Adjust nearest mesh point - #define USER_GCODE_2 "G29 P4\nM500" - - #define USER_DESC_3 "PID Autotune End" - #define USER_GCODE_3 "M303 U1 E0 S200 C8\nM500" - - #define USER_DESC_4 "PID Autotune Bed" - #define USER_GCODE_4 "M303 U1 E-1 S60 C8\nM500" - - #define USER_DESC_5 "Park Toolhead" - #define USER_GCODE_5 "G27" - -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - #define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/MakerParts/Configuration.h b/config/examples/MakerParts/Configuration.h deleted file mode 100644 index ebbf1e731c..0000000000 --- a/config/examples/MakerParts/Configuration.h +++ /dev/null @@ -1,2226 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "ejtagle" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT -1 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 0 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_DUO_EFB -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "MakerParts 3D Printer" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -#define MACHINE_UUID "4250d842-4943-4601-acca-95ef77b8a4f1" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - #define DEFAULT_Kp 22.2 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 97 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 2, 30 } // For 300mm/s printing - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 2400, 2400, 10, 200 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 2400 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 100 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 2400 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 2.0 - #define DEFAULT_YJERK 2.0 - #define DEFAULT_ZJERK 0.4 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 8.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.001 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/MakerParts/Configuration_adv.h b/config/examples/MakerParts/Configuration_adv.h deleted file mode 100644 index 31b4a82216..0000000000 --- a/config/examples/MakerParts/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 180 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - #define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -#define LCD_TIMEOUT_TO_STATUS 30000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G27" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - #define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE true // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM true // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES true // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - #define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - #define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - #define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - #define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -//#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 32 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -#define RX_BUFFER_SIZE 4096 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - #define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - #define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - #define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/MakerParts/_Bootscreen.h b/config/examples/MakerParts/_Bootscreen.h deleted file mode 100644 index 6b66855388..0000000000 --- a/config/examples/MakerParts/_Bootscreen.h +++ /dev/null @@ -1,81 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Custom Boot Screen bitmap - * - * Place this file in the root with your configuration files - * and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h. - * - * Use the Marlin Bitmap Converter to make your own: - * http://marlinfw.org/tools/u8glib/converter.html - */ - -#define CUSTOM_BOOTSCREEN_BMPWIDTH 128 - -const unsigned char custom_start_bmp[] PROGMEM = { - B00000000,B00011111,B11111111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B11111111,B11111111,B11111000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000111,B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00011111,B11111111,B11111111,B11111111,B11000000,B00001111,B10000000,B01111100,B00000111,B11100000,B00111111,B00001111,B11011111,B11111111,B01111111,B11110000, - B00111111,B11111111,B11111111,B11111111,B11100000,B00001111,B11000000,B11111100,B00000111,B11100000,B00111111,B00011111,B10011111,B11111111,B01111111,B11111100, - B01111111,B10111111,B11111111,B11101111,B11110000,B00001111,B11000000,B11111100,B00001111,B11110000,B00111111,B00011111,B00011111,B11111111,B01111111,B11111110, - B01111110,B00001111,B11111111,B10000011,B11110000,B00001111,B11100001,B11111100,B00001111,B11110000,B00111111,B00111110,B00011111,B11111111,B01111111,B11111110, - B01111100,B00000111,B11111111,B00000001,B11110000,B00001111,B11100001,B11111100,B00011111,B11111000,B00111111,B01111110,B00011111,B10000000,B01111100,B00111110, - B01111100,B00000011,B11111110,B00000001,B11110000,B00001111,B11110011,B11111100,B00011111,B11111000,B00111111,B11111100,B00011111,B10000000,B01111100,B00011110, - B01111100,B00000001,B11111100,B00000001,B11110000,B00001111,B11110011,B11111100,B00011111,B11111000,B00111111,B11111000,B00011111,B11111100,B01111100,B00111110, - B01111100,B00000000,B11111000,B00000001,B11110000,B00001111,B11111111,B11111100,B00111110,B01111100,B00111111,B11111000,B00011111,B11111100,B01111111,B11111110, - B01111100,B00000000,B01110000,B00000001,B11110000,B00001111,B11111111,B11111100,B00111110,B01111100,B00111111,B11111100,B00011111,B11111100,B01111111,B11111110, - B01111100,B00000000,B00100000,B00000001,B11110000,B00001111,B11111111,B11111100,B00111110,B01111100,B00111111,B11111100,B00011111,B11111100,B01111111,B11111100, - B01111100,B00000000,B00000000,B00000001,B11110000,B00001111,B10111111,B01111100,B01111111,B11111110,B00111111,B11111110,B00011111,B11111100,B01111111,B11111000, - B01111100,B00000000,B00000000,B00000001,B11110000,B00001111,B10111111,B01111100,B01111111,B11111110,B00111111,B11111110,B00011111,B10000000,B01111111,B11111000, - B01111100,B00000000,B00000000,B00000001,B11110000,B00001111,B10011110,B01111100,B01111111,B11111110,B00111111,B00111111,B00011111,B10000000,B01111100,B11111000, - B01111100,B00000110,B00000011,B00000001,B11110000,B00001111,B10011110,B01111100,B11111111,B11111111,B00111111,B00111111,B00011111,B11111111,B01111100,B11111100, - B01111100,B00000111,B00000111,B00000001,B11110000,B00001111,B10001100,B01111100,B11111111,B11111111,B00111111,B00011111,B10011111,B11111111,B01111100,B11111100, - B01111100,B00000111,B10001111,B00000001,B11110000,B00001111,B10000000,B01111100,B11111000,B00011111,B00111111,B00011111,B10011111,B11111111,B01111100,B01111110, - B01111100,B00000111,B11011111,B00000001,B11110000,B00001111,B10000000,B01111101,B11111000,B00011111,B10111111,B00001111,B11011111,B11111111,B01111100,B00111111, - B01111100,B00000111,B11111111,B00000001,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B01111100,B00000111,B11111111,B00000001,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B01111100,B00000111,B11111111,B00000001,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B01111100,B00000111,B11111111,B00000001,B11110000,B00001111,B11111110,B00000011,B11110000,B00011111,B11111000,B00111111,B11111111,B10000111,B11111000,B00000000, - B01111100,B00000111,B11111111,B00000001,B11110000,B00001111,B11111111,B00000011,B11110000,B00011111,B11111110,B00111111,B11111111,B10011111,B11111110,B00000000, - B01111100,B00000111,B11111111,B00000001,B11100000,B00001111,B11111111,B10000111,B11111000,B00011111,B11111111,B00111111,B11111111,B10011111,B11111110,B00000000, - B00111100,B00001111,B11111111,B10000001,B11100000,B00001111,B11111111,B11000111,B11111000,B00011111,B11111111,B10111111,B11111111,B10111111,B11111110,B00000000, - B00111100,B00001111,B11111111,B10000001,B11100000,B00001111,B11111111,B11000111,B11111000,B00011111,B11111111,B10111111,B11111111,B10111111,B00111100,B00000000, - B00011110,B00001111,B11111111,B10000011,B11000000,B00001111,B10000111,B11001111,B11111100,B00011111,B00001111,B11000001,B11110000,B00111110,B00000000,B00000000, - B00011110,B00001111,B11111111,B10000011,B11000000,B00001111,B10000011,B11001111,B11111100,B00011111,B00000111,B11000001,B11110000,B00111111,B11000000,B00000000, - B00001111,B00001111,B11111111,B10000111,B10000000,B00001111,B10000111,B11001111,B00111100,B00011111,B00001111,B10000001,B11110000,B00111111,B11111000,B00000000, - B00001111,B00001111,B11111111,B10000111,B10000000,B00001111,B11111111,B11011111,B00111110,B00011111,B11111111,B10000001,B11110000,B00011111,B11111110,B00000000, - B00000111,B10001111,B11111111,B10001111,B00000000,B00001111,B11111111,B10011111,B00111110,B00011111,B11111111,B10000001,B11110000,B00011111,B11111110,B00000000, - B00000111,B11001111,B11111111,B10011111,B00000000,B00001111,B11111111,B00011111,B00111110,B00011111,B11111111,B00000001,B11110000,B00000111,B11111111,B00000000, - B00000011,B11101111,B11111111,B10111110,B00000000,B00001111,B11111100,B00111111,B11111111,B00011111,B11111110,B00000001,B11110000,B00000000,B01111111,B00000000, - B00000001,B11101111,B11111111,B10111100,B00000000,B00001111,B10000000,B00111111,B11111111,B00011111,B00111110,B00000001,B11110000,B00011000,B00011111,B00000000, - B00000000,B11101111,B11111111,B10111000,B00000000,B00001111,B10000000,B00111111,B11111111,B00011111,B00111111,B00000001,B11110000,B00011110,B00111111,B01111100, - B00000000,B01101111,B11111111,B10110000,B00000000,B00001111,B10000000,B01111111,B11111111,B10011111,B00111111,B00000001,B11110000,B00111111,B11111111,B01111100, - B00000000,B00101111,B11111111,B10100000,B00000000,B00001111,B10000000,B01111111,B11111111,B10011111,B00011111,B10000001,B11110000,B01111111,B11111110,B01111100, - B00000000,B00001111,B11111111,B10000000,B00000000,B00001111,B10000000,B01111100,B00001111,B10011111,B00011111,B10000001,B11110000,B00111111,B11111110,B01111100, - B00000000,B00001111,B11111111,B10000000,B00000000,B00001111,B10000000,B11111100,B00001111,B11011111,B00001111,B11000001,B11110000,B00001111,B11111000,B01111100, - B00000000,B00000111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000011,B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B11111000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000 -}; diff --git a/config/examples/Malyan/M150/Configuration.h b/config/examples/Malyan/M150/Configuration.h deleted file mode 100644 index 82c8168755..0000000000 --- a/config/examples/Malyan/M150/Configuration.h +++ /dev/null @@ -1,2267 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Maylan M150 Configuration - * Non-Automatic Bed Level config by default - */ - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(Gunther)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 115200 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_MELZI_MALYAN -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Malyan M150" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 - -// For Malyan M150, some discussions around changing the TEMP_SENSOR_BED from 1 to 3 on a french discussion board. -// The reasons are inconclusive so I leave at 1 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Malyan M150 example - #define DEFAULT_Kp 29 - #define DEFAULT_Ki 2 - #define DEFAULT_Kd 97 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). - -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - * - * These defaults for the Malyan M150 are low values intended to - * give a baseline. With mods it is possible to raise jerk, etc. - * - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ - // Standard M150 17T MXL on X and Y -#define DEFAULT_AXIS_STEPS_PER_UNIT { 3200/34.544, 3200/34.544, 1600, 103.00 } - -// Other common M150 values: -// 16T MXL on X and Y -// #define DEFAULT_AXIS_STEPS_PER_UNIT { 3200/32.512, 3200/32.512, 1600, 103.00 } -// 16T GT2 on X and Y -// #define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 1600, 103.00 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 700, 700, 100, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 700 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 700 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 8.0 - #define DEFAULT_YJERK 8.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.037 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ - -// Set for HoolyHoo's probe mount -// http://www.thingiverse.com/thing:1960419 -// Note: HoolyHoo mount is X=35, Y=-50. -//#define NOZZLE_TO_PROBE_OFFSET { 35, -50, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -//#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -//#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -//#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -//#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -//#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -//#define Z_PROBE_OFFSET_RANGE_MIN -20 -//#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR false -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 180 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ - -// - LINEAR - Not Available on Malyan M150 due to compile memory issues -// - Use MESH_BED_LEVELING, AUTO_BED_LEVELING_3POINT or AUTO_BED_LEVELING_BILINEAR - -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - #define PROBE_PT_1_X 50 - #define PROBE_PT_1_Y 150 - #define PROBE_PT_2_X 50 - #define PROBE_PT_2_Y 50 - #define PROBE_PT_3_X 150 - #define PROBE_PT_3_Y 50 -#endif - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 205 -#define PREHEAT_1_TEMP_BED 60 -#define PREHEAT_1_FAN_SPEED 128 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 230 -#define PREHEAT_2_TEMP_BED 100 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Malyan/M150/Configuration_adv.h b/config/examples/Malyan/M150/Configuration_adv.h deleted file mode 100644 index 137da9fcca..0000000000 --- a/config/examples/Malyan/M150/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 120 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -//#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 75 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 300 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -//#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Malyan/M150/README.md b/config/examples/Malyan/M150/README.md deleted file mode 100644 index 3a5026a4bd..0000000000 --- a/config/examples/Malyan/M150/README.md +++ /dev/null @@ -1,55 +0,0 @@ -# Configuration for Malyan M150 HobbyKing printer - -Config without automatic bed level sensor, or in other words, "as stock" - -## To install: - -1. Install [Arduino](https://www.arduino.cc/en/Main/Software) - -1. Install U8glib - * `Sketch` -> `Include Library` -> `Manage Libraries...` - * Search for and install `U8glib` by oliver - -1. Install Sanguino - * `File` -> `Preferences` - * Add - `https://raw.githubusercontent.com/Lauszus/Sanguino/master/package_lauszus_sanguino_index.json` - to `Additional Boards Manager URLs` - -1. Modify Sanguino `boards.txt` - * Close Arduino - * Locate Arduino15 folder - - `C:\Users\\AppData\Local\Arduino15` for Windows - - `~/.arduino15` for Linux - - * Locate `boards.txt` in `packages/Sanguino/hardware/avr/1.0.2` - (version number may change) - * Add the following to the end of `boards.txt` - (note that it is the same as sanguino.menu.cpu.atmega1284p but with - a different name and upload speed) - - ## Malyan M150 W/ ATmega1284P 16MHz - sanguino.menu.cpu.malyan_m150=Malyan M150 - sanguino.menu.cpu.malyan_m150.upload.maximum_size=130048 - sanguino.menu.cpu.malyan_m150.upload.maximum_data_size=16384 - sanguino.menu.cpu.malyan_m150.upload.speed=57600 - sanguino.menu.cpu.malyan_m150.bootloader.file=optiboot/optiboot_atmega1284p.hex - sanguino.menu.cpu.malyan_m150.build.mcu=atmega1284p - sanguino.menu.cpu.malyan_m150.build.f_cpu=16000000L - -1. Configure Marlin - * Copy `_Bootscreen.h`, `Configuration.h`, and `Configuration_adv.h` - from `config/examples/Malyan/M150` to `Marlin` - (overwrite files) - * Read `Configuration.h` and make any necessary changes - -1. Flash Marlin - * Turn on printer while pressing scroll wheel button - * Plug printer in to computer with USB cable - * Open `Marlin/Marlin.ino` with Arduino - * Configure Arduino - - `Tools` -> `Board` -> `Sanguino` - - `Tools` -> `Processor` -> `Malyan M150` - - `Tools` -> `Port` -> Select your port - - * `Sketch` -> `Upload` or click arrow in top right corner diff --git a/config/examples/Malyan/M150/_Bootscreen.h b/config/examples/Malyan/M150/_Bootscreen.h deleted file mode 100644 index 4c7da4cc24..0000000000 --- a/config/examples/Malyan/M150/_Bootscreen.h +++ /dev/null @@ -1,71 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Custom Boot Screen bitmap - * - * Place this file in the root with your configuration files - * and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h. - * - * Use the Marlin Bitmap Converter to make your own: - * http://marlinfw.org/tools/u8glib/converter.html - */ - -#define CUSTOM_BOOTSCREEN_TIMEOUT 1000 -#define CUSTOM_BOOTSCREEN_BMPWIDTH 128 - -const unsigned char custom_start_bmp[] PROGMEM = { - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000111,B00000000,B00000000,B00000011,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00011111,B11000000,B00000000,B00001111,B11100000,B01111100,B00000011,B11100000,B01111000,B00011100,B00000111,B10000001,B11100000,B11110000,B00111110,B00001110, - B01111111,B11100000,B00000000,B00111111,B11110000,B01111110,B00000111,B11100000,B11111100,B00011100,B00000011,B10000001,B11000001,B11111000,B00111111,B00001110, - B01111111,B11111000,B00000000,B01111111,B11110000,B01111110,B00000111,B11100000,B11111100,B00011100,B00000011,B11000011,B11000001,B11111000,B00111111,B00001110, - B01111011,B11111110,B00000001,B11111110,B11110000,B01111111,B00001111,B11100001,B11111110,B00011100,B00000001,B11000011,B10000011,B11111100,B00111111,B10001110, - B01111100,B11111111,B10000111,B11111001,B11110000,B01110111,B00001110,B11100001,B11111110,B00011100,B00000001,B11100111,B10000011,B11111100,B00111011,B10001110, - B01111111,B01111111,B11001111,B11110111,B11110000,B01110111,B10011110,B11100001,B11001110,B00011100,B00000000,B11100111,B00000011,B10011100,B00111011,B11001110, - B01111111,B10011111,B11111111,B11001111,B11110000,B01110011,B10011100,B11100011,B11001111,B00011100,B00000000,B11111111,B00000111,B10011110,B00111001,B11001110, - B01111111,B11100111,B11111111,B00111111,B11110000,B01110011,B11111100,B11100011,B10000111,B00011100,B00000000,B01111110,B00000111,B00001110,B00111001,B11101110, - B01111111,B11111011,B11111110,B11111111,B11110000,B01110001,B11111000,B11100011,B10000111,B00011100,B00000000,B01111110,B00001111,B00001111,B00111000,B11101110, - B01111111,B11111100,B11111001,B11111111,B11110000,B01110001,B11111000,B11100111,B11111111,B10011100,B00000000,B00111100,B00001111,B11111111,B00111000,B11111110, - B01111111,B11111111,B00100111,B11111111,B11110000,B01110000,B11110000,B11100111,B11111111,B10011100,B00000000,B00111100,B00001111,B11111111,B00111000,B01111110, - B01111111,B11111111,B11011111,B11111111,B11110000,B01110000,B11110000,B11101111,B11111111,B11011100,B00000000,B00111100,B00011111,B11111111,B10111000,B01111110, - B01111111,B11011111,B11111111,B11011111,B11110000,B01110000,B01100000,B11101111,B00000011,B11011111,B11111000,B00111100,B00011110,B00000111,B10111000,B00111110, - B01111111,B11000111,B11111111,B00011111,B11110000,B01110000,B01100000,B11101110,B00000001,B11011111,B11111000,B00111100,B00011100,B00000011,B10111000,B00111110, - B01111111,B11000011,B11111110,B00011111,B11110000,B01110000,B00000000,B11101110,B00000001,B11011111,B11111000,B00111100,B00011100,B00000011,B10111000,B00011110, - B01111111,B11000011,B11111110,B00011111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B01111111,B11000011,B11011110,B00011111,B11110000,B01111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111110, - B01111111,B11000011,B11011110,B00011111,B11110000,B01111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111110, - B01111111,B11000011,B11011110,B00011111,B11110000,B01111100,B00111111,B11111010,B11111011,B11111111,B11111111,B11111111,B11111101,B01111010,B10111111,B11111110, - B01111111,B11000011,B11011110,B00011111,B11110000,B01111101,B10011111,B11111011,B11111111,B11111111,B11111111,B11111111,B11111111,B01111110,B11110111,B11111110, - B01111111,B11000011,B11011110,B00011111,B11110000,B01111101,B10010011,B00011010,B10001010,B00011000,B11100011,B10001100,B01000101,B00011010,B10100010,B11011110, - B00111111,B11000011,B11011110,B00001111,B11110000,B01111100,B00101101,B11001010,B11001010,B11010110,B11101001,B00100100,B11001101,B01101010,B10110110,B10111110, - B00011111,B10000011,B11011110,B00000111,B11100000,B01111101,B10100011,B01101010,B10011010,B11010110,B11101001,B00100110,B01100101,B01101010,B10110110,B00111110, - B00000110,B00000011,B11011110,B00000001,B10000000,B01111101,B10010001,B00001010,B10001010,B11011000,B11100011,B10001100,B01000101,B00011010,B10110011,B01111110, - B00000000,B00000011,B11011110,B00000000,B00000000,B01111111,B11111111,B11111111,B11111111,B11111110,B11101111,B11111111,B11111111,B11111111,B11111111,B01111110, - B00000000,B00000011,B11011110,B00000000,B00000000,B01111111,B11111111,B11111111,B11111111,B11110001,B11101111,B11111111,B11111111,B11111111,B11111110,B11111110, - B00000000,B00000011,B11011110,B00000000,B00000000,B01111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111110, - B00000000,B00000011,B11011110,B00000000,B00000000,B01111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111110, - B00000000,B00000011,B11011110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000001,B11011100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B01010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, -}; diff --git a/config/examples/Malyan/M200/Configuration.h b/config/examples/Malyan/M200/Configuration.h deleted file mode 100644 index 8af0e8c3d4..0000000000 --- a/config/examples/Malyan/M200/Configuration.h +++ /dev/null @@ -1,2236 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(xC0000005, Malyan M200 build)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT -1 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 500000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_MALYAN_M200 -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Malyan M200" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 11 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 11 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 250 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 100 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - //#define DEFAULT_Kp 26.15 - //#define DEFAULT_Ki 2.74 - //#define DEFAULT_Kd 62.35 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - - // Malyan M200 - #define DEFAULT_Kp 20.0 - #define DEFAULT_Ki 2.02 - #define DEFAULT_Kd 100.00 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - //#define DEFAULT_bedKp 231.09 - //#define DEFAULT_bedKi 45.21 - //#define DEFAULT_bedKd 295.34 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // Malyan M200 - #define DEFAULT_bedKp 14.00 - #define DEFAULT_bedKi 0.9 - #define DEFAULT_bedKd 120.4 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 93, 93, 1097.5, 97 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X true -#define DISABLE_Y true -#define DISABLE_Z true - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 120 -#define Y_BED_SIZE 120 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 120 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Malyan/M200/Configuration_adv.h b/config/examples/Malyan/M200/Configuration_adv.h deleted file mode 100644 index 222ec28e2d..0000000000 --- a/config/examples/Malyan/M200/Configuration_adv.h +++ /dev/null @@ -1,2933 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 50 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -#define USE_CONTROLLER_FAN // Malyan M200: uncomment if you use FAN2 to cool the board (original) -#if ENABLED(USE_CONTROLLER_FAN) - #define CONTROLLER_FAN_PIN MALYAN_FAN2_PIN // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -//#define FAN_PIN MALYAN_FAN1_PIN // Malyan M200: uncomment if you use FAN1 to cool the part and FAN2 to cool the extruder -//#define E0_AUTO_FAN_PIN MALYAN_FAN2_PIN // Malyan M200: uncomment if you use FAN1 to cool the part and FAN2 to cool the extruder -#define E0_AUTO_FAN_PIN MALYAN_FAN1_PIN // Malyan M200: uncomment if you use FAN1 to cool the extruder and the part (original) -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -//#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Malyan/M200/README.md b/config/examples/Malyan/M200/README.md deleted file mode 100644 index 8129650dc7..0000000000 --- a/config/examples/Malyan/M200/README.md +++ /dev/null @@ -1,33 +0,0 @@ -### Malyan M200 Build Instructions - -Malyan M200 series firmware currently builds using the Arduino IDE. These instructions should -guide you through the configuration and compilation. - -1. Install the Arduino IDE from your favorite source (arduino.cc, windows store, app store) -2. Launch the IDE to add the ST boards manager: - - Open the **Preferences** dialog. - - Add this link in the "*Additional Boards Managers URLs*" field: - https://github.com/stm32duino/BoardManagerFiles/raw/master/STM32/package_stm_index.json - - Select "**Show verbose ouptut during: compilation**." -3. Select **Tools** > **Board** > **Boards Manager**. -4. Type "Malyan" into the Search field. -5. The only board listed will be "**STM32 Cores by STMicroelectronics**." Any version from 1.6.0 up is fine. Choose install. This will download many tools and packages, be patient. -6. Open the **Tools** > **Board** submenu, scroll all the way down, and select **3D Printer Boards**. -7. From the **Tools** menu, select a board part number: - - If you own a M200 V1 or early run (black V2), choose **Malyan M200 V1**. - - If you own a M200 V2 later run (white/black) or V3 (Pro), choose **Malyan M200 V2** (The V2 and V3 both share an STM32F070 MCU). Note that the V3 pinout is not complete (autolevel doesn't work as of this writing). -8. From the **Tools** menu, choose **USB Support** > **CDC No Generic Serial**. -9. Download the latest Marlin source (from the [bugfix-2.0.x](https://github.com/MarlinFirmware/Marlin/tree/bugfix-2.0.x) branch) and unzip it. -10. Look in the `Marlin` subdirectory for the `Configuration.h` and `Configuration_adv.h` files. Replace these files with the configurations in the `config\examples\Malyan\M200` folder. -11. If you have an early-run V2, the steps-per-mm are roughly half. Consult the [mpminipro.com wiki](https://mpminipro.com/) for the steps that apply to your unit. Modify `Configuration.h`. -12. Inverting Axis. There's no pattern to axes will need to be inverted. The only way to know is to test your particular printer. If you *do* know, go ahead and invert the correct axes. -13. Open the `Marlin/Marlin.ino` file in Arduino IDE. -14. From the **Sketch** menu, select **File** > **Export Compiled Binary**. -15. When compilation is done you've built the firmware. The next stage is to flash it to the board. To do this look for a line like this: `"path/to/bin/arm-none-eabi-objcopy" -O binary "/path/to/Marlin.ino.elf" "/path/to/Marlin.ino.bin"` - The file `Marlin.ino.bin` is your firmware binary. M200 (v1-3) and M300 printers require flashing via SD card. Use the SD card that came with the printer if possible. The bootloader is very picky about SD cards. Copy `Marlin.ino.bin` to your SD card under three names: `firmware.bin`, `update.bin`, and `fcupdate.flg`. -16. Insert the SD card into your printer. Make sure the X and Y axes are centered in the middle of the bed. (When X and Y endstops are closed this signals a UI upgrade to the bootloader.) -17. Power-cycle the printer. The first flash may take longer. Don't be surprised if the .99 version number doesn't show up until after the UI has launched the default screen. -18. Remove the SD card and delete the `fcupdate.flg` file from the card to prevent an accidental re-flash. -19. Test the endstops and homing directions, run M303 PID autotune, and verify all features are working correctly. - -Welcome to Marlin 2.x... diff --git a/config/examples/Micromake/C1/basic/Configuration.h b/config/examples/Micromake/C1/basic/Configuration.h deleted file mode 100644 index cf925b6ccd..0000000000 --- a/config/examples/Micromake/C1/basic/Configuration.h +++ /dev/null @@ -1,2230 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(MetalSearch, Micromake C1 factory settings)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_MAKEBOARD_MINI -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Micromake C1" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 0 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - #define DEFAULT_Kp 22.2 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -// choose your micro step per step configuration ( 16 factory settings ) -#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 100, 150 } // 16 steps per unit for Micromake C1 - Factory Settings - ( MS1 : closed ; MS2 : closed on MAKEBOARD Mini) -//#define DEFAULT_AXIS_STEPS_PER_UNIT { 200, 200, 200, 300 } // 32 steps per unit for Micromake C1 - Custom Settings - ( MS1 : closed ; MS2 : open on MAKEBOARD Mini) -//#define DEFAULT_AXIS_STEPS_PER_UNIT { 400, 400, 400, 600 } // 64 steps per unit for Micromake C1 - Custom Settings - ( MS1 : open ; MS2 : closed on MAKEBOARD Mini) -//#define DEFAULT_AXIS_STEPS_PER_UNIT { 800, 800, 800, 1200 } // 128 steps per unit for Micromake C1 - Custom Settings - ( MS1 : open ; MS2 : open on MAKEBOARD Mini) - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 200, 200, 200, 30 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ - #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 3000, 4000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK DEFAULT_XJERK - #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR false -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 240 -#define Y_BED_SIZE 240 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 260 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Micromake/C1/basic/README.md b/config/examples/Micromake/C1/basic/README.md deleted file mode 100644 index 0111f6f00a..0000000000 --- a/config/examples/Micromake/C1/basic/README.md +++ /dev/null @@ -1,15 +0,0 @@ -# Micromake C1 - -### In the folder "basic" -Configuration files for Micromake C1 without mods - - English LCD 2X16 Characters - - Motors 16 STEPS - - No heated bed - - No probe, etc. - - Like a standard C1 as shipped by Micromake. - -### In the folder "enhanced" -Configuration files for Micromake C1 with… - - 128 STEPS configured with jumper on the motherboard (all open for 128 Steps). - - Capacitive Probe (Adjust offsets at your convenience) - - French language with no accents for Japanese LCD. diff --git a/config/examples/Micromake/C1/enhanced/Configuration.h b/config/examples/Micromake/C1/enhanced/Configuration.h deleted file mode 100644 index d8c5b2149c..0000000000 --- a/config/examples/Micromake/C1/enhanced/Configuration.h +++ /dev/null @@ -1,2230 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(MetalSearch, Micromake C1 enhanced)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_MAKEBOARD_MINI -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Micromake C1" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 0 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - #define DEFAULT_Kp 22.2 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -// choose your micro step per step configuration ( 16 factory settings ) -//#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 100, 150 } // 16 steps per unit for Micromake C1 - Factory Settings - ( MS1 : closed ; MS2 : closed on MAKEBOARD Mini) -//#define DEFAULT_AXIS_STEPS_PER_UNIT { 200, 200, 200, 300 } // 32 steps per unit for Micromake C1 - Custom Settings - ( MS1 : closed ; MS2 : open on MAKEBOARD Mini) -//#define DEFAULT_AXIS_STEPS_PER_UNIT { 400, 400, 400, 600 } // 64 steps per unit for Micromake C1 - Custom Settings - ( MS1 : open ; MS2 : closed on MAKEBOARD Mini) -#define DEFAULT_AXIS_STEPS_PER_UNIT { 800, 800, 800, 1200 } // 128 steps per unit for Micromake C1 - Custom Settings - ( MS1 : open ; MS2 : open on MAKEBOARD Mini) - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ - #define DEFAULT_MAX_FEEDRATE { 200, 200, 200, 30 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ - #define DEFAULT_MAX_ACCELERATION { 3000, 3000, 3000, 4000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK DEFAULT_XJERK - #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR false -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 240 -#define Y_BED_SIZE 240 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 260 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 -#define LCD_FEEDBACK_FREQUENCY_HZ 1000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/config/examples/Micromake/C1/enhanced/Configuration_adv.h deleted file mode 100644 index 94d4d20345..0000000000 --- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G27" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -//#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Micromake/C1/enhanced/README.md b/config/examples/Micromake/C1/enhanced/README.md deleted file mode 100644 index 0111f6f00a..0000000000 --- a/config/examples/Micromake/C1/enhanced/README.md +++ /dev/null @@ -1,15 +0,0 @@ -# Micromake C1 - -### In the folder "basic" -Configuration files for Micromake C1 without mods - - English LCD 2X16 Characters - - Motors 16 STEPS - - No heated bed - - No probe, etc. - - Like a standard C1 as shipped by Micromake. - -### In the folder "enhanced" -Configuration files for Micromake C1 with… - - 128 STEPS configured with jumper on the motherboard (all open for 128 Steps). - - Capacitive Probe (Adjust offsets at your convenience) - - French language with no accents for Japanese LCD. diff --git a/config/examples/Mks/Robin/Configuration.h b/config/examples/Mks/Robin/Configuration.h deleted file mode 100644 index dcf7608f0b..0000000000 --- a/config/examples/Mks/Robin/Configuration.h +++ /dev/null @@ -1,2235 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 3 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT_2 1 -#define NUM_SERIAL 2 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_MKS_ROBIN -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "MKS Robin" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 2 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 1 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - #define DEFAULT_Kp 22.2 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 500 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT -#define SDIO_SUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 75 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 100 // (ms) Button repeat delay for menus - - /* MKS Robin TFT v2.0 */ - #define XPT2046_X_CALIBRATION 12013 - #define XPT2046_Y_CALIBRATION -8711 - #define XPT2046_X_OFFSET -32 - #define XPT2046_Y_OFFSET 256 - - /* MKS Robin TFT v1.1 */ - //#define XPT2046_X_CALIBRATION -11792 - //#define XPT2046_Y_CALIBRATION 8947 - //#define XPT2046_X_OFFSET 342 - //#define XPT2046_Y_OFFSET -19 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Mks/Robin/Configuration_adv.h b/config/examples/Mks/Robin/Configuration_adv.h deleted file mode 100644 index fa1151064d..0000000000 --- a/config/examples/Mks/Robin/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - //#define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -//#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Mks/Robin_Lite3/Configuration.h b/config/examples/Mks/Robin_Lite3/Configuration.h deleted file mode 100644 index 865c146ec8..0000000000 --- a/config/examples/Mks/Robin_Lite3/Configuration.h +++ /dev/null @@ -1,2233 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -//#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT -1 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//MKS Robin Lite3 AUX-1 and USB Use UART1(PA9-TX,PA10-RX) #define SERIAL_PORT_2 1 -//MKS Robin Pro USB Use UART3(PB10-TX,PB11-RX) #define SERIAL_PORT_2 3 -//MKS RUMBA32 AUX-1 Use UART1(PA9-TX,PA10-RX) #define SERIAL_PORT_2 1 -//MKS SBASE AUX-1 Use UART0(P0.2-TXD0,P0.3-RXD0) #define SERIAL_PORT_2 0 -//MKS SGEN AUX-1 Use UART0(P0.2-TXD0,P0.3-RXD0) #define SERIAL_PORT_2 0 -//MKS SGEN_L AUX-1 Use UART0(P0.2-TXD0,P0.3-RXD0) #define SERIAL_PORT_2 0 -//MKS Robin Nano USB Use UART3(PB10-TX,PB11-RX) #define SERIAL_PORT_2 3 -#define SERIAL_PORT_2 1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_MKS_ROBIN_LITE3 -#endif - -// Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 0 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - #define DEFAULT_Kp 22.2 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 500 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Mks/Robin_Lite3/ReadMe.txt b/config/examples/Mks/Robin_Lite3/ReadMe.txt deleted file mode 100644 index d8919f43cd..0000000000 --- a/config/examples/Mks/Robin_Lite3/ReadMe.txt +++ /dev/null @@ -1,5 +0,0 @@ -1. MKS Robin Lite3 is a powerful 32-bit 3D printer control board with STM32F103RCT6. -2. Support Marlin2.0. -3. Support MKS LCD12864B/MINI12864/LCD2004/12864 and MKS TFT Touch Screens. -4. The main board integrates 5 AXIS interface, BLTOUCH interface, hot bed, 2 heating heads, 3 NTC100K and LCD screen SD card supports firmware update. -https://www.aliexpress.com/item/4000295949948.html?spm=2114.12010615.8148356.1.596183361yB18D diff --git a/config/examples/Mks/Robin_Pro/Configuration.h b/config/examples/Mks/Robin_Pro/Configuration.h deleted file mode 100644 index 46a6f866ad..0000000000 --- a/config/examples/Mks/Robin_Pro/Configuration.h +++ /dev/null @@ -1,2232 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT -1 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//MKS Robin Lite3 AUX-1 and USB Use UART1(PA9-TX,PA10-RX) #define SERIAL_PORT_2 1 -//MKS Robin Pro USB Use UART3(PB10-TX,PB11-RX) #define SERIAL_PORT_2 3 -//MKS SBASE AUX-1 Use UART0(P0.2-TXD0,P0.3-RXD0) #define SERIAL_PORT_2 0 -//MKS SGEN AUX-1 Use UART0(P0.2-TXD0,P0.3-RXD0) #define SERIAL_PORT_2 0 -//MKS SGEN_L AUX-1 Use UART0(P0.2-TXD0,P0.3-RXD0) #define SERIAL_PORT_2 0 -//MKS Robin Nano USB Use UART3(PB10-TX,PB11-RX) #define SERIAL_PORT_2 3 -#define SERIAL_PORT_2 3 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_MKS_ROBIN_PRO -#endif - -// Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 0 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - #define DEFAULT_Kp 22.2 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 500 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 75 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 100 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Mks/Robin_Pro/ReadMe.txt b/config/examples/Mks/Robin_Pro/ReadMe.txt deleted file mode 100644 index 8d5241b5d0..0000000000 --- a/config/examples/Mks/Robin_Pro/ReadMe.txt +++ /dev/null @@ -1,4 +0,0 @@ -1. MKS Robin Pro is a powerful 32-bit 3D printer control board with STM32F103ZET6. -2. Support Marlin2.0. Support LCD2004/12864 and MKS Robin TFT24/28/32... Screens. -3. The motherboard integrates 6 AXIS interface, BLTOUCH interface, hot bed, 3 heating heads, 4 NTC100K, 2 MAX31855, integrates SPI / UART interface and works with MKS TMC2130/TMC2208 V2.0/TMC -https://www.aliexpress.com/item/4000444286159.html?spm=2114.12010615.8148356.1.4158721an5TnW9 diff --git a/config/examples/Mks/Sbase/Configuration.h b/config/examples/Mks/Sbase/Configuration.h deleted file mode 100644 index 79575d5de7..0000000000 --- a/config/examples/Mks/Sbase/Configuration.h +++ /dev/null @@ -1,2226 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT -1 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 0 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_MKS_SBASE -#endif - -// Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - #define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 5 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 5 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - #define DEFAULT_Kp 22.2 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -#define X_DRIVER_TYPE DRV8825 -#define Y_DRIVER_TYPE DRV8825 -#define Z_DRIVER_TYPE DRV8825 -//#define X2_DRIVER_TYPE DRV8825 -//#define Y2_DRIVER_TYPE DRV8825 -//#define Z2_DRIVER_TYPE DRV8825 -//#define Z3_DRIVER_TYPE DRV8825 -#define E0_DRIVER_TYPE DRV8825 -#define E1_DRIVER_TYPE DRV8825 -//#define E2_DRIVER_TYPE DRV8825 -//#define E3_DRIVER_TYPE DRV8825 -//#define E4_DRIVER_TYPE DRV8825 -//#define E5_DRIVER_TYPE DRV8825 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 200, 200, 800, 280 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 32, 5, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 213 -#define Y_BED_SIZE 220 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -//#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops curtail movement above maximum coordinate bounds -//#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -//#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Mks/Sbase/Configuration_adv.h b/config/examples/Mks/Sbase/Configuration_adv.h deleted file mode 100644 index 9a4d18e5ee..0000000000 --- a/config/examples/Mks/Sbase/Configuration_adv.h +++ /dev/null @@ -1,2932 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 50 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 6 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 110 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 4 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 100 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro -#define DIGIPOT_I2C - -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) // Default to settings in pins_XXXX.h files - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 5 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.2, 1.2, 1.2, 1.2, 1.2 } // MKS SBASE: 5 - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -//#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Mks/Sbase/README.txt b/config/examples/Mks/Sbase/README.txt deleted file mode 100644 index 1ec5e7fd7a..0000000000 --- a/config/examples/Mks/Sbase/README.txt +++ /dev/null @@ -1,38 +0,0 @@ -The MKS products (all?) have the EXP1 & EXP2 LCD connectors rotated 180 degrees from the ones on the RepRap LCD controllers. - -In order to attach the RepRap Discount Full Graphic Smart Controller you'll need to do something like one of the following for both EXP1 & EXP2: - a. On one end only, shave the keying plug off the cables and plug the cables in backwards. - b. On one end only, carefully pry the housings off the board, rotate them 180 degrees and press them back onto the pins. - c. Make custom cables where one connector is rotated 180 degrees. - - MKS: 1 2 3 4 5 6 7 8 9 10 - RepRap: 10 9 8 7 6 5 4 3 2 1 - - -///////////////////////////////////////////////////////////////////// - -3 DEC 2017 - -The current Marlin 2.0.x firmware cannot properly access some of the pins on the EXP2 connector. In order to use the RepRap Discount Full Graphic Smart Controller you'll need a custom cable that gets three of the signals from a different connector. In that cable move the pin/wire that: - - used to go to P0.8 to J8-3 - " " " " P0.7 to J8-2 - " " " " P0.5 to J8-4 - -If pins different than the J8 ones above are used then the spi_pins.h file will need to be modified. - -An octopus cable something like the Adafruit 1199 will simply the construction of the custom cable. Just plug the Adafruit 1199 into one of the cables that came with the LCD and the individual pins into J8 and EXP2 as needed. - -Adafruit 10-pin IDC Socket Rainbow Breakout Cable [1199] - https://www.adafruit.com/product/1199 - - -///////////////////////////////////////////////////////////////////// - -27 APR 2018 - -If you also want a functional SD_DETECT_PIN then you'll need to also move the following pin: - - used to go to P0.27 to J8-5 - -if you decide to use a different pin then the pins_MKS_SBASE.h file will need to be modified. diff --git a/config/examples/Modix/Big60/Configuration.h b/config/examples/Modix/Big60/Configuration.h deleted file mode 100644 index e96183b342..0000000000 --- a/config/examples/Modix/Big60/Configuration.h +++ /dev/null @@ -1,2226 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "3DXtech" // Who made the changes. -#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_MKS_GEN_L -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "ModixBig60" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX (1), 'true' for X-Box (2) - - //#define PS_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 5 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 0 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 315 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - #define DEFAULT_Kp 22.2 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 59.50 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -//#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 200, 100, 2000, 418.50 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 200, 200, 5, 70 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 2000, 2000, 100, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.06 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { -34, 26, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 5000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -3 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR true -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR 1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 600 -#define Y_BED_SIZE 600 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 600 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING true // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - #define FILAMENT_RUNOUT_DISTANCE_MM 100 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - #define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 15 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - #define UBL_Z_RAISE_WHEN_OFF_MESH 0.0 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - #define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (6*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 50), (Y_MIN_POS + 50), 10 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Modix/Big60/Configuration_adv.h b/config/examples/Modix/Big60/Configuration_adv.h deleted file mode 100644 index f498b24267..0000000000 --- a/config/examples/Modix/Big60/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 10 // Degrees Celsius - - #define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - #define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - #define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - #define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - #define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 3 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 50 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 25 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - #define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 120 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - #define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - #define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - #define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Modix/Big60/_Bootscreen.h b/config/examples/Modix/Big60/_Bootscreen.h deleted file mode 100644 index 6285bcd1a4..0000000000 --- a/config/examples/Modix/Big60/_Bootscreen.h +++ /dev/null @@ -1,91 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -#define CUSTOM_BOOTSCREEN_BMPWIDTH 128 - -const unsigned char custom_start_bmp[] PROGMEM = { - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B10001000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11100111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01110001,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111100,B00100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,B00100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111000,B00000000,B10000111,B11111000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B00001100,B00000000,B10000011,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B00001100,B00000000,B10000001,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00001100,B00000110,B00000000,B10000000,B11100011,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00011000,B00000110,B00000000,B10000000,B01101111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00011100,B00111000,B00000010,B00000000,B10000000,B00111100,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00011111,B00110000,B00000011,B00000000,B11000000,B00111100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B01110111,B10110000,B00000010,B11111111,B01100000,B00111100,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B11100000,B11111000,B00000110,B11111111,B10110000,B00111100,B00011000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B11000000,B11011000,B00001101,B10000001,B10011000,B00011100,B00001000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000011,B10000000,B11011000,B00001001,B10000000,B11011100,B11111100,B00001000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000010,B00000000,B11011000,B00011011,B00000000,B01101111,B11100100,B00001100,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000010,B00000000,B11011111,B11111011,B00000000,B00110111,B00000110,B00001100,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000110,B00000000,B11100111,B11110110,B00000000,B00011000,B00000011,B00000100,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000110,B00000000,B11100000,B00001110,B00000000,B00011000,B00001111,B00000100,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000110,B00000000,B11000000,B00101110,B00000000,B00011011,B11111111,B11000110,B00000000,B00000000,B00000000,B00000000,B00000000, - B00111111,B11111100,B00011111,B11110110,B01111101,B10000001,B11100110,B00000000,B00011011,B11000111,B11000110,B00000000,B00000000,B00000000,B00000000,B00000000, - B01111111,B11111110,B00111111,B11111111,B00011111,B10001111,B11000011,B11111111,B11111111,B11111111,B11111100,B00011111,B11111111,B00111000,B00000011,B11000000, - B11111111,B11111111,B11111111,B11111111,B10001111,B00011111,B11000111,B11111111,B11111111,B11111111,B11111000,B11111111,B11111111,B00111100,B00000011,B11100000, - B00010000,B00001111,B11110000,B00001111,B10001111,B11111111,B10000011,B11111111,B11110111,B11111111,B11111000,B11111111,B11111100,B00111100,B00000011,B11100000, - B00000000,B00001111,B11110000,B00000111,B11111111,B11111111,B00000001,B10011110,B00100111,B11111100,B11000010,B11111000,B00000000,B00111110,B00000011,B11100000, - B00001111,B11111111,B11110000,B00000011,B11011111,B11111110,B00000001,B11001110,B01101100,B11111100,B01000111,B11111000,B00000000,B00111111,B11111111,B11100000, - B00011111,B11111111,B11110000,B00000011,B11000011,B11111100,B00000000,B11111111,B11001100,B11111111,B11111111,B11110000,B00000000,B00111111,B11111111,B11100000, - B00011111,B11111111,B11110000,B00000011,B11000011,B11111100,B00000000,B00001110,B00011100,B11111111,B11111001,B11100000,B00000000,B00111111,B11111111,B11100000, - B00000000,B00001111,B11110000,B00001111,B11000111,B11111100,B00000000,B00001110,B00011100,B11111111,B11110001,B11100000,B00000000,B00111111,B11111111,B11100000, - B00000000,B00001111,B11111000,B00001111,B10000111,B11111110,B00000000,B00001110,B00001100,B11111000,B11110000,B11110000,B00000000,B00111100,B00000011,B11100000, - B01111111,B11111111,B11111111,B11111111,B10111111,B10001111,B00000000,B00111111,B11100110,B11111000,B11100000,B11111100,B00000000,B00111100,B00000011,B11100000, - B01111111,B11111111,B11111111,B11111111,B11111111,B00000111,B11000000,B11111111,B11100111,B11111111,B11111100,B11111111,B11111111,B00111100,B00000011,B11100000, - B11111111,B11111111,B11111111,B11111111,B11111110,B00000011,B11100000,B10001110,B00110011,B11111111,B11111100,B00011111,B11111111,B00111100,B00000011,B11100000, - B01111111,B11111100,B00111111,B11110000,B00111100,B00000001,B11110001,B10011110,B00110001,B11111111,B11111001,B00001111,B11111110,B00111100,B00000011,B11000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B00000000,B00011001,B11111111,B11000001,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B00000000,B00001100,B11100000,B11000001,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B00000000,B00001100,B00000000,B01000010,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B00000000,B00000110,B00000001,B01100010,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001100,B00000000,B00000110,B00111111,B01100010,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00001110,B00000000,B00001101,B11111101,B11101110,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B01111111,B11100110,B00000000,B00011001,B10000001,B11111100,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B11101111,B11110111,B00000000,B00011011,B00000001,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B11000000,B00110011,B00000000,B00110011,B00000001,B11001000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B10000000,B00011011,B00000000,B00110110,B00000001,B10011000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00001101,B11111111,B11101100,B00000001,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000001,B00000000,B00001110,B11111111,B11011000,B00000001,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000001,B11110001,B10000000,B00000110,B01100000,B00111000,B00000111,B10100000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000001,B11111101,B10000000,B00000011,B00000000,B00011000,B00000101,B01000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000001,B10001111,B11000000,B00000110,B11111111,B11011100,B00001010,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B10000001,B11100000,B00001100,B11111111,B11001100,B00011111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B10000001,B11110000,B00001101,B10000000,B01101100,B11111110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B01000000,B11111110,B00011011,B00000000,B01100111,B10001100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00100000,B01111111,B11110110,B00000000,B00100000,B00011000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00010000,B00110000,B01101110,B00000000,B00111111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000100,B00110000,B00001110,B00000000,B11111111,B10100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000011,B00110000,B00000110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000001,B11110000,B00000011,B00000011,B11100010,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111111,B10001000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000010,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, -}; diff --git a/config/examples/Modix/Big60/_Statusscreen.h b/config/examples/Modix/Big60/_Statusscreen.h deleted file mode 100644 index e9ee8b9857..0000000000 --- a/config/examples/Modix/Big60/_Statusscreen.h +++ /dev/null @@ -1,60 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -#define STATUS_LOGO_Y 1 -#define STATUS_LOGO_WIDTH 32 - -const unsigned char status_logo_bmp[] PROGMEM = { - B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00010000,B00000000, - B00000000,B00000000,B00000110,B00000000, - B00000000,B00000000,B00000000,B00000000, - B00000001,B00000000,B00000000,B00000000, - B00001000,B00000000,B00000001,B00000000, - B00000001,B00000000,B01000001,B00000000, - B00000001,B00000000,B00000010,B00000000, - B00000000,B11100000,B00000000,B00000000, - B10000000,B00001000,B00010000,B10000000, - B00000100,B00000000,B00000000,B01000000, - B00001000,B00000000,B00001000,B00000000, - B00010000,B00000100,B00000000,B00000000, - B00000000,B00000000,B00000000,B00110000, - B00000000,B00000000,B00000000,B00100000, - B00000000,B00000001,B11101000,B00100000, - B00000000,B00000000,B00000000,B01100000, - B00000000,B00000000,B00000010,B00000000, - B00000000,B00001000,B00000000,B00000000, - B00000000,B00000000,B00000001,B00100000, - B00000010,B11101000,B00010000,B01100000, - B00000000,B00000000,B00000000,B01000000, - B00000000,B00000011,B11000000,B01100000, - B01100100,B00000000,B00010000,B00000000, - B00000100,B00000011,B11000000,B00000000, - B00000010,B00000000,B00100000,B00000000, - B00000000,B00101000,B00000000,B00000000, - B00000000,B00001000,B00100000,B00000000, - B00000000,B00000000,B01000000,B00000000, - B00000000,B00000000,B00000000,B00000000 -}; diff --git a/config/examples/Printrbot/PrintrboardG2/Configuration.h b/config/examples/Printrbot/PrintrboardG2/Configuration.h deleted file mode 100644 index 3400811fb9..0000000000 --- a/config/examples/Printrbot/PrintrboardG2/Configuration.h +++ /dev/null @@ -1,2231 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT -1 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -// For programming port do NOT define -#define SERIAL_PORT_2 0 // For native port - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 115200 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_PRINTRBOARD_G2 -#endif - -// Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - #define DEFAULT_Kp 22.2 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -//#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -//#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE DRV8825 -//#define Y_DRIVER_TYPE DRV8825 -//#define Z_DRIVER_TYPE DRV8825 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE DRV8825 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -//#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 500 } -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 80, 80 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -//#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } -#define DEFAULT_MAX_FEEDRATE { 30, 30,30,30 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -//#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } -#define DEFAULT_MAX_ACCELERATION { 100, 100, 100, 100 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ - -#define DEFAULT_ACCELERATION 100 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 100 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 100 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 1.0 - #define DEFAULT_YJERK 1.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.004 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR 1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -//#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -//#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -//#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 20 // LED driving pin - #define NEOPIXEL_PIXELS 3 // Number of LEDs in the strip - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - #define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/RapideLite/RL200/Configuration.h b/config/examples/RapideLite/RL200/Configuration.h deleted file mode 100644 index 3db4f425b3..0000000000 --- a/config/examples/RapideLite/RL200/Configuration.h +++ /dev/null @@ -1,2226 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(platon42)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 115200 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RL200 -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Rapide Lite 200" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 250 -#define HEATER_1_MAXTEMP 250 -#define HEATER_2_MAXTEMP 250 -#define HEATER_3_MAXTEMP 250 -#define HEATER_4_MAXTEMP 250 -#define HEATER_5_MAXTEMP 250 -#define BED_MAXTEMP 120 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - #define DEFAULT_Kp 22.2 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -#define X_DRIVER_TYPE DRV8825 -#define Y_DRIVER_TYPE DRV8825 -#define Z_DRIVER_TYPE DRV8825 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -#define Z2_DRIVER_TYPE DRV8825 -//#define Z3_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE DRV8825 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 157, 157, 800, 195 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR true -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR true -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 190 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/RapideLite/RL200/Configuration_adv.h b/config/examples/RapideLite/RL200/Configuration_adv.h deleted file mode 100644 index 355c15e3ea..0000000000 --- a/config/examples/RapideLite/RL200/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -//#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Renkforce/RF100/Configuration.h b/config/examples/Renkforce/RF100/Configuration.h deleted file mode 100644 index df74efb1a0..0000000000 --- a/config/examples/Renkforce/RF100/Configuration.h +++ /dev/null @@ -1,2234 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 115200 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB -#endif - -#define FAN_PIN -1 -#define KILL_PIN 64 - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "RF100" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 0 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Renkforce RF100 - #define DEFAULT_Kp 19.0 - #define DEFAULT_Ki 1.30 - #define DEFAULT_Kd 70.1 - - // Ultimaker - //#define DEFAULT_Kp 22.2 - //#define DEFAULT_Ki 1.08 - //#define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -//#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 78.82, 78.82, 800, 116 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 20, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR 1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 105 -#define Y_BED_SIZE 110 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 105 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 200 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 230 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Renkforce/RF100/Configuration_adv.h b/config/examples/Renkforce/RF100/Configuration_adv.h deleted file mode 100644 index a9b596b86c..0000000000 --- a/config/examples/Renkforce/RF100/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN 9 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 100 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - #define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -//#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 100 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 10 - //#define PROBE_PT_2_X 90 - //#define PROBE_PT_2_Y 10 - //#define PROBE_PT_3_X 55 - //#define PROBE_PT_3_Y 100 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -#define MINIMUM_STEPPER_PULSE 0 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Renkforce/RF100XL/Configuration.h b/config/examples/Renkforce/RF100XL/Configuration.h deleted file mode 100644 index e6b23a0ea5..0000000000 --- a/config/examples/Renkforce/RF100XL/Configuration.h +++ /dev/null @@ -1,2234 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 115200 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB -#endif - -#define FAN_PIN -1 -#define KILL_PIN 64 - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "RF100 XL" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Renkforce RF100 - #define DEFAULT_Kp 19.0 - #define DEFAULT_Ki 1.30 - #define DEFAULT_Kd 70.1 - - // Ultimaker - //#define DEFAULT_Kp 22.2 - //#define DEFAULT_Ki 1.08 - //#define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -//#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 78.82, 78.82, 800, 116 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 20, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR 1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 200 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 230 -#define PREHEAT_2_TEMP_BED 100 -#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Renkforce/RF100XL/Configuration_adv.h b/config/examples/Renkforce/RF100XL/Configuration_adv.h deleted file mode 100644 index a9b596b86c..0000000000 --- a/config/examples/Renkforce/RF100XL/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN 9 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 100 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - #define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -//#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 100 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 10 - //#define PROBE_PT_2_X 90 - //#define PROBE_PT_2_Y 10 - //#define PROBE_PT_3_X 55 - //#define PROBE_PT_3_Y 100 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -#define MINIMUM_STEPPER_PULSE 0 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Renkforce/RF100v2/Configuration.h b/config/examples/Renkforce/RF100v2/Configuration.h deleted file mode 100644 index 7cbbf47412..0000000000 --- a/config/examples/Renkforce/RF100v2/Configuration.h +++ /dev/null @@ -1,2234 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 115200 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB -#endif - -#define FAN_PIN -1 -#define KILL_PIN 64 - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "RF100" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 0 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Renkforce RF100 - #define DEFAULT_Kp 19.0 - #define DEFAULT_Ki 1.30 - #define DEFAULT_Kd 70.1 - - // Ultimaker - //#define DEFAULT_Kp 22.2 - //#define DEFAULT_Ki 1.08 - //#define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -//#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 78.82, 78.82, 800, 116 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 20, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR 1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 120 -#define Y_BED_SIZE 120 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 120 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 200 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 230 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Renkforce/RF100v2/Configuration_adv.h b/config/examples/Renkforce/RF100v2/Configuration_adv.h deleted file mode 100644 index a9b596b86c..0000000000 --- a/config/examples/Renkforce/RF100v2/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN 9 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 100 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - #define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -//#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 100 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 10 - //#define PROBE_PT_2_X 90 - //#define PROBE_PT_2_Y 10 - //#define PROBE_PT_3_X 55 - //#define PROBE_PT_3_Y 100 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -#define MINIMUM_STEPPER_PULSE 0 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/RepRapPro/Huxley/Configuration.h b/config/examples/RepRapPro/Huxley/Configuration.h deleted file mode 100644 index e7e854d346..0000000000 --- a/config/examples/RepRapPro/Huxley/Configuration.h +++ /dev/null @@ -1,2275 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(indazoo, Huxley v1)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_SANGUINOLOLU_12 -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Huxley" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 // Sanguinololu v1.3 with 4.7kOhm pullup -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - #define DEFAULT_Kp 22.2 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -// -// Standard NEMA 17 with T2 belt and 20 tooth pulley -// -#define NEMA17_FULL_STEPS 200.0 -#define XY_MICROSTEPS 16.0 -#define E_MICROSTEPS 16.0 -#define Z_MICROSTEPS 16.0 - -/* RepRapPro belts -http://forums.reprap.org/read.php?1,391198 -White polyurethane belt(T2.5), 14 - tooth printed pulley : 91.4286 step per mm (Original Huxley, Legacy Mendel) -Black rubber belt(MXL), 17 - tooth printed pulley : 92.635 step per mm (Huxley, Mendel Mono and Tri since 1 / 4 / 2013) -Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley, Mendel Mono and Tri since 1 / 1 / 2014) -*/ -#define XY_PULLEY_PITCH 2.5 //RepRapPro Huxley has T2.5 belts -#define XY_PULLEY_TEETH 14.0 //RepRapPro Huxley has 14 teeth pulleys - -// -// Standard NEMA 17 with fancy 5mm lead screws -// -#define Z_RODS_PITCH 0.8 - -#define XY_MOTOR_STEPS (NEMA17_FULL_STEPS * XY_MICROSTEPS) -#define Z_MOTOR_STEPS (NEMA17_FULL_STEPS * Z_MICROSTEPS) -#define E_MOTOR_STEPS (NEMA17_FULL_STEPS * E_MICROSTEPS) - -// -// MK7 Direct Drive -// -#define E_MOTOR_GEAR_TEETH 11.0 //Num of teeth of gear on extruder motor -#define E_ROD_GEAR_TEETH 53.0 //Num of teeth of gear driving the extruder rod -#define E_ROD_DIAM 5.4 // ca value. M6 rod drives the filament. Manual calibration needed. -#define E_ROD_CIRC (M_PI * E_ROD_DIAM) -#define E_STEPS (E_MOTOR_STEPS / (E_MOTOR_GEAR_TEETH/E_ROD_GEAR_TEETH) / E_ROD_CIRC) - -// Get steps/mm from selected results above -#define XY_STEPS (XY_MOTOR_STEPS / (XY_PULLEY_PITCH * XY_PULLEY_TEETH)) -#define Z_STEPS (Z_MOTOR_STEPS / Z_RODS_PITCH) - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { XY_STEPS, XY_STEPS, Z_STEPS, E_STEPS } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_Z_FEEDRATE 3.3 // older Huxley has problem with speeds > 3.3 mm/s on Z axis -#define DEFAULT_MAX_FEEDRATE { 200, 200, DEFAULT_MAX_Z_FEEDRATE, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 1000, 1000, 50, 1000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.04 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR false -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -// http://reprap.org/wiki/Configuring_Marlin_Bed_Dimensions -// http://marlinfw.org/docs/configuration/configuration.html#movement-bounds -#define X_BED_SIZE 140 -#define Y_BED_SIZE 140 -// Huxley with 110x110 PEI board. -//#define X_BED_SIZE 108 -//#define Y_BED_SIZE 108 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS -9 -#define Y_MIN_POS -5 -// Huxley with 110x110 PEI board. -//#define X_MIN_POS -25 -//#define Y_MIN_POS -21 -#define Z_MIN_POS 0 - -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 80 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (DEFAULT_MAX_Z_FEEDRATE*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE DEFAULT_MAX_Z_FEEDRATE // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -//#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/RepRapWorld/Megatronics/Configuration.h b/config/examples/RepRapWorld/Megatronics/Configuration.h deleted file mode 100644 index ef3700d7b1..0000000000 --- a/config/examples/RepRapWorld/Megatronics/Configuration.h +++ /dev/null @@ -1,2226 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "RepRapWorld.com" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 115200 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_MEGATRONICS_3 -#endif - -// Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - #define DEFAULT_Kp 22.2 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 78.7402*2, 78.7402*2, 5120.00, 760*1*1.5 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -#define REPRAPWORLD_KEYPAD -#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/RigidBot/Configuration.h b/config/examples/RigidBot/Configuration.h deleted file mode 100644 index cc92071a97..0000000000 --- a/config/examples/RigidBot/Configuration.h +++ /dev/null @@ -1,2226 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, RigidBot)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 115200 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -// for Rigidbot version 1 : #define MOTHERBOARD BOARD_RIGIDBOARD -// for Rigidbot Version 2 : #define MOTHERBOARD BOARD_RIGIDBOARD_V2 - -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RIGIDBOARD_V2 -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Rigidbot" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 // Single extruder. Set to 2 for dual extruders - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 // DGlass3D = 5; RigidBot = 1; 3DSv6 = 5 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -//#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Rigidbot hotend - #define DEFAULT_Kp 16.17 - #define DEFAULT_Ki 0.85 - #define DEFAULT_Kd 76.55 - - // Base DGlass3D/E3Dv6 hotend - //#define DEFAULT_Kp 10 - //#define DEFAULT_Ki 0.85 - //#define DEFAULT_Kd 245 - - // E3D w/ rigidbot cartridge - //#define DEFAULT_Kp 16.30 - //#define DEFAULT_Ki 0.95 - //#define DEFAULT_Kd 69.69 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //RigidBot, from pid autotune - #define DEFAULT_bedKp 355 - #define DEFAULT_bedKi 66.5 - #define DEFAULT_bedKd 480 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ - // default steps per unit for RigidBot with standard hardware -#define DEFAULT_AXIS_STEPS_PER_UNIT { 44.3090, 22.1545, 1600, 53.5 } -// default steps for 16-tooth pulleys { 100.06, 50.06, 1600, 76 } // HPX2-MAX E=504, RigidBot E=53.5, Peter Stoneham's=76 - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 800, 800, 100, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 600 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 8.0 - #define DEFAULT_YJERK 8.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.043 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR false -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR true -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 254 // RigidBot regular is 254mm, RigitBot Big is 406mm -#define Y_BED_SIZE 248 // RigidBot regular is 248mm, RigitBot Big is 304mm - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 254 // RigidBot regular and Big are 254mm - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (15*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -// RigidBoard: To rewire this for a RigidBot see http://rigidtalk.com/wiki/index.php?title=LCD_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/RigidBot/Configuration_adv.h b/config/examples/RigidBot/Configuration_adv.h deleted file mode 100644 index 0120be933b..0000000000 --- a/config/examples/RigidBot/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - #define CONTROLLER_FAN_PIN 4 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 60 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -//#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 8 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - //#define USER_DESC_5 "Home & Info" - //#define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/SCARA/MP_SCARA/Configuration.h b/config/examples/SCARA/MP_SCARA/Configuration.h deleted file mode 100644 index e1d4df34cd..0000000000 --- a/config/examples/SCARA/MP_SCARA/Configuration.h +++ /dev/null @@ -1,2248 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== - -/** - * MORGAN_SCARA was developed by QHARLEY in South Africa in 2012-2013. - * Implemented and slightly reworked by JCERNY in June, 2014. - */ -//#define MORGAN_SCARA - -/** - * Mostly Printed SCARA is an open source design by Tyler Williams. See: - * https://www.thingiverse.com/thing:2487048 - * https://www.thingiverse.com/thing:1241491 - */ -#define MP_SCARA - -#if EITHER(MORGAN_SCARA, MP_SCARA) - // If movement is choppy try lowering this value - #define SCARA_SEGMENTS_PER_SECOND 200 - - // Length of inner and outer support arms. Measure arm lengths precisely. - #define SCARA_LINKAGE_1 98.41 // (mm) - #define SCARA_LINKAGE_2 100.66 // (mm) - - // SCARA tower offset (position of Tower relative to bed zero position) - // This needs to be reasonably accurate as it defines the printbed position in the SCARA space. - #define SCARA_OFFSET_X 0 // (mm) - #define SCARA_OFFSET_Y 0 // (mm) - - #if ENABLED(MORGAN_SCARA) - - //#define DEBUG_SCARA_KINEMATICS - #define SCARA_FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly - - // Radius around the center where the arm cannot reach - #define MIDDLE_DEAD_ZONE_R 0 // (mm) - - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - - #elif ENABLED(MP_SCARA) - - #define SCARA_OFFSET_THETA1 12 // degrees - #define SCARA_OFFSET_THETA2 131 // degrees - - #endif - -#endif - -//=========================================================================== -//==================== END ==== SCARA Printer ==== END ====================== -//=========================================================================== - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "SCARA" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 3 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_HYSTERESIS 2 // (°C) Temperature proximity considered "close enough" to the target -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer - -#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 20 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // Merlin Hotend: From Autotune - #define DEFAULT_Kp 24.5 - #define DEFAULT_Ki 1.72 - #define DEFAULT_Kd 87.73 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //12v Heatbed Mk3 12V in parallel - //from pidautotune - #define DEFAULT_bedKp 630.14 - #define DEFAULT_bedKi 121.71 - #define DEFAULT_bedKd 815.64 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -//#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -#define USE_YMAX_PLUG -#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX // open pin, inverted - //#define ENDSTOPPULLUP_XMIN // open pin, inverted - //#define ENDSTOPPULLUP_YMIN // open pin, inverted - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 28.6738351, 28.6738351, 1600, 93 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 2.5, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 1000, 1000, 10, 20000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 5.0 - #define DEFAULT_YJERK 5.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 3.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.025 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR 1 -#define Z_HOME_DIR 1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS X_BED_SIZE -#define Z_MAX_POS 100 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -#define MANUAL_X_HOME_POS 0 -#define MANUAL_Y_HOME_POS 199.07 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (20*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 100 -#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -//#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/SCARA/MP_SCARA/Configuration_adv.h b/config/examples/SCARA/MP_SCARA/Configuration_adv.h deleted file mode 100644 index bf4d6825c5..0000000000 --- a/config/examples/SCARA/MP_SCARA/Configuration_adv.h +++ /dev/null @@ -1,2928 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 3000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 180 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 3 -#define Y_HOME_BUMP_MM 3 -#define Z_HOME_BUMP_MM 3 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 240 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -//#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 10*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - //#define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -//#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 35 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - //#define USER_DESC_5 "Home & Info" - //#define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/SCARA/Morgan/Configuration.h b/config/examples/SCARA/Morgan/Configuration.h deleted file mode 100644 index 921661bd60..0000000000 --- a/config/examples/SCARA/Morgan/Configuration.h +++ /dev/null @@ -1,2248 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== - -/** - * MORGAN_SCARA was developed by QHARLEY in South Africa in 2012-2013. - * Implemented and slightly reworked by JCERNY in June, 2014. - */ -#define MORGAN_SCARA - -/** - * Mostly Printed SCARA is an open source design by Tyler Williams. See: - * https://www.thingiverse.com/thing:2487048 - * https://www.thingiverse.com/thing:1241491 - */ -//#define MP_SCARA - -#if EITHER(MORGAN_SCARA, MP_SCARA) - // If movement is choppy try lowering this value - #define SCARA_SEGMENTS_PER_SECOND 200 - - // Length of inner and outer support arms. Measure arm lengths precisely. - #define SCARA_LINKAGE_1 150 // (mm) - #define SCARA_LINKAGE_2 150 // (mm) - - // SCARA tower offset (position of Tower relative to bed zero position) - // This needs to be reasonably accurate as it defines the printbed position in the SCARA space. - #define SCARA_OFFSET_X 100 // (mm) - #define SCARA_OFFSET_Y -56 // (mm) - - #if ENABLED(MORGAN_SCARA) - - //#define DEBUG_SCARA_KINEMATICS - #define SCARA_FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly - - // Radius around the center where the arm cannot reach - #define MIDDLE_DEAD_ZONE_R 0 // (mm) - - #define THETA_HOMING_OFFSET 0 // Calculated from Calibration Guide and M360 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - #define PSI_HOMING_OFFSET 0 // Calculated from Calibration Guide and M364 / M114. See http://reprap.harleystudio.co.za/?page_id=1073 - - #elif ENABLED(MP_SCARA) - - #define SCARA_OFFSET_THETA1 12 // degrees - #define SCARA_OFFSET_THETA2 131 // degrees - - #endif - -#endif - -//=========================================================================== -//==================== END ==== SCARA Printer ==== END ====================== -//=========================================================================== - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "SCARA" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 3 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_HYSTERESIS 2 // (°C) Temperature proximity considered "close enough" to the target -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer - -#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 20 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // Merlin Hotend: From Autotune - #define DEFAULT_Kp 24.5 - #define DEFAULT_Ki 1.72 - #define DEFAULT_Kd 87.73 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //12v Heatbed Mk3 12V in parallel - //from pidautotune - #define DEFAULT_bedKp 630.14 - #define DEFAULT_bedKi 121.71 - #define DEFAULT_bedKd 815.64 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -//#define USE_XMIN_PLUG -//#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -#define USE_XMAX_PLUG -#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -//#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - #define ENDSTOPPULLUP_XMAX - #define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX // open pin, inverted - //#define ENDSTOPPULLUP_XMIN // open pin, inverted - //#define ENDSTOPPULLUP_YMIN // open pin, inverted - #define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 103.69, 106.65, 200/1.25, 1000 } // default steps per unit for SCARA - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 30, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 300, 300, 20, 1000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 400 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 400 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 5.0 - #define DEFAULT_YJERK 5.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 3.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.025 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR false -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR 1 -#define Y_HOME_DIR 1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS MANUAL_Z_HOME_POS -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 225 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -#define MANUAL_X_HOME_POS -22 -#define MANUAL_Y_HOME_POS -52 -#define MANUAL_Z_HOME_POS 0.1 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (40*60) -#define HOMING_FEEDRATE_Z (10*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 100 -#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -//#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/SCARA/Morgan/Configuration_adv.h b/config/examples/SCARA/Morgan/Configuration_adv.h deleted file mode 100644 index e5ca5c5cc9..0000000000 --- a/config/examples/SCARA/Morgan/Configuration_adv.h +++ /dev/null @@ -1,2928 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 3000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 180 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 3 -#define Y_HOME_BUMP_MM 3 -#define Z_HOME_BUMP_MM 3 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 240 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -//#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 10*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - //#define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -//#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 35 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - //#define USER_DESC_5 "Home & Info" - //#define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration.h b/config/examples/STM32/Black_STM32F407VET6/Configuration.h deleted file mode 100644 index 992cffd292..0000000000 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration.h +++ /dev/null @@ -1,2226 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT -1 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT_2 1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_BLACK_STM32F407VE -#endif - -// Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 2 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 1 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 1 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - #define DEFAULT_Kp 22.2 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 500 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -//#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -#define NUM_SERVOS 2 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300, 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h deleted file mode 100644 index ec0282f288..0000000000 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN FAN1_PIN -#define E1_AUTO_FAN_PIN FAN2_PIN -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -//#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/STM32/STM32F103RE/Configuration.h b/config/examples/STM32/STM32F103RE/Configuration.h deleted file mode 100644 index b0e6062a03..0000000000 --- a/config/examples/STM32/STM32F103RE/Configuration.h +++ /dev/null @@ -1,2228 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "Victor Perez" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_STM32F103RE -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "CTC i3 Pro B" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#warning temp_sensor set to 998/999 (fake) -#define TEMP_SENSOR_0 999 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 998 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 60 -#define DUMMY_THERMISTOR_999_VALUE 205 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 180 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - #define DEFAULT_Kp 22.2 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#warning "disabled temperature protection" -//#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -//#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 78.74, 78.74, 2560, 105.0 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 400, 400, 2, 45 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 1400, 1400, 100, 80000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 1400 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 5000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 13.0 - #define DEFAULT_YJERK 13.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.048 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 180 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -//#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 200 -#define PREHEAT_1_TEMP_BED 60 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 220 -#define PREHEAT_2_TEMP_BED 100 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/STM32/STM32F4/Configuration.h b/config/examples/STM32/STM32F4/Configuration.h deleted file mode 100644 index fd31a313b9..0000000000 --- a/config/examples/STM32/STM32F4/Configuration.h +++ /dev/null @@ -1,2226 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT -1 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_GENERIC_STM32F4 -#endif - -// Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 0 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - #define DEFAULT_Kp 22.2 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 500 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -//#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/STM32/stm32f103ret6/Configuration.h b/config/examples/STM32/stm32f103ret6/Configuration.h deleted file mode 100644 index 3a1a0332be..0000000000 --- a/config/examples/STM32/stm32f103ret6/Configuration.h +++ /dev/null @@ -1,2228 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "Victor Perez" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_STM32F103RE -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "CTC i3 Pro B" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 3 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#warning temp_sensor set to 998/999 (fake) -#define TEMP_SENSOR_0 999 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 998 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 60 -#define DUMMY_THERMISTOR_999_VALUE 205 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 180 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - #define DEFAULT_Kp 22.2 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#warning "disabled temperature protection" -//#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -//#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 78.74, 78.74, 2560, 105.0 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 400, 400, 2, 45 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 1400, 1400, 100, 80000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 1400 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 5000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 13.0 - #define DEFAULT_YJERK 13.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.048 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 180 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -//#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 200 -#define PREHEAT_1_TEMP_BED 60 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 220 -#define PREHEAT_2_TEMP_BED 100 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Sanguinololu/Configuration.h b/config/examples/Sanguinololu/Configuration.h deleted file mode 100644 index e8f5718269..0000000000 --- a/config/examples/Sanguinololu/Configuration.h +++ /dev/null @@ -1,2257 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(thinkyhead, Sanguinololu)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 115200 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_SANGUINOLOLU_12 -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Sanguinololu" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - #define DEFAULT_Kp 22.2 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -// -// Standard NEMA 17 with T2 belt and 20 tooth pulley -// -#define NEMA17_FULL_STEPS 200.0 -#define XY_MICROSTEPS 16.0 -#define E_MICROSTEPS 16.0 -#define Z_MICROSTEPS 16.0 - -#define XY_PULLEY_PITCH 2.0 -#define XY_PULLEY_TEETH 20.0 - -// -// Standard NEMA 17 with fancy 2mm lead screws -// -#define Z_RODS_PITCH 0.5 - -#define XY_MOTOR_STEPS (NEMA17_FULL_STEPS * XY_MICROSTEPS) -#define Z_MOTOR_STEPS (NEMA17_FULL_STEPS * Z_MICROSTEPS) -#define E_MOTOR_STEPS (NEMA17_FULL_STEPS * E_MICROSTEPS) - -// -// MK7 Direct Drive -// -#define MK7_GEAR_DIAM 10.56 -#define MK7_GEAR_CIRC (M_PI * MK7_GEAR_DIAM) -#define E_STEPS (E_MOTOR_STEPS / MK7_GEAR_CIRC) - -// Get steps/mm from selected results above -#define XY_STEPS (XY_MOTOR_STEPS / (XY_PULLEY_PITCH * XY_PULLEY_TEETH)) -#define Z_STEPS (Z_MOTOR_STEPS / Z_RODS_PITCH) - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { XY_STEPS, XY_STEPS, Z_STEPS, E_STEPS } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 500, 500, 8, 45 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR false -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 170 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (6*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -//#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - #define RGB_LED_R_PIN 11 - #define RGB_LED_G_PIN 10 - #define RGB_LED_B_PIN 17 - #define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Sanguinololu/Configuration_adv.h b/config/examples/Sanguinololu/Configuration_adv.h deleted file mode 100644 index 66a1f3b66b..0000000000 --- a/config/examples/Sanguinololu/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -//#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Tevo/Michelangelo/Configuration.h b/config/examples/Tevo/Michelangelo/Configuration.h deleted file mode 100644 index edbe1789b4..0000000000 --- a/config/examples/Tevo/Michelangelo/Configuration.h +++ /dev/null @@ -1,2231 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(thisiskeithb, Tevo Michelangelo)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_MKS_GEN_L -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Michelangelo" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 0 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 5 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 5 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 285 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - -// Tevo Michelangelo - #define DEFAULT_Kp 19.71 - #define DEFAULT_Ki 1.39 - #define DEFAULT_Kd 69.81 - - // Ultimaker - //#define DEFAULT_Kp 22.2 - //#define DEFAULT_Ki 1.08 - //#define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 300 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80.165, 80.165, 399.2901, 408 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 500, 500, 60, 55 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 10000, 10000, 400, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 2000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 10000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 5000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 150 -#define Y_BED_SIZE 150 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS -10 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 160 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - #define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (120*60) -#define HOMING_FEEDRATE_Z (30*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 200 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "PETG" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 WESTERN - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Tevo/Michelangelo/Configuration_adv.h b/config/examples/Tevo/Michelangelo/Configuration_adv.h deleted file mode 100644 index ce6255c14d..0000000000 --- a/config/examples/Tevo/Michelangelo/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN 7 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - #define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - #define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - #define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - #define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Tevo/Michelangelo/_Bootscreen.h b/config/examples/Tevo/Michelangelo/_Bootscreen.h deleted file mode 100644 index b3d74daf48..0000000000 --- a/config/examples/Tevo/Michelangelo/_Bootscreen.h +++ /dev/null @@ -1,83 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Made with Marlin Bitmap Converter - * http://marlinfw.org/tools/u8glib/converter.html - */ -#define CUSTOM_BOOTSCREEN_BMPWIDTH 128 - -const unsigned char custom_start_bmp[] PROGMEM = { - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111111, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11111111, - B00000000,B00000000,B00000000,B00001111,B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111111,B11111111, - B00000000,B00000000,B00000000,B00111111,B11111111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111111,B11111111, - B00000000,B00000000,B00000001,B11111111,B11111111,B11111111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111111,B11111111,B11111111, - B00000000,B00000000,B00000111,B11111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111111,B11111111,B11111111, - B00000000,B00000000,B00011111,B11111111,B11111111,B11111111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,B11111111,B11111111,B11111111, - B00000000,B00000000,B01111111,B11111111,B11111111,B11111111,B11111100,B00000000,B00000000,B00000000,B00000000,B00000111,B11111111,B11111111,B11111111,B11111111, - B00000000,B00000011,B11111111,B11111111,B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000001,B11111111,B11111111,B11111111,B11111111,B11111111, - B00000000,B00001111,B11111111,B11111111,B11111111,B11111111,B11111111,B11000000,B00000000,B00000000,B00000111,B11111111,B11111111,B11111111,B11111111,B11111111, - B00000000,B01111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00011111,B11111111,B11111111,B11111111,B11111111,B11111111, - B00001111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11110000,B00000000,B00000111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111111,B00111111,B11111011,B11111111,B11110000,B00000011,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111100,B00011111,B11111101,B11111111,B11111000,B00011111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11111000,B00001111,B11111110,B11111111,B11111000,B01111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11110000,B00000011,B11111111,B01101111,B11011100,B01111111,B10111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11100000,B00000000,B00111111,B11100111,B11001110,B00000000,B00000011,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11000000,B00000000,B00001111,B11000111,B11000110,B00000000,B00000001,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B11000000,B00000000,B00000011,B11100011,B11100000,B00000000,B00000001,B11111111,B11111111,B11000000,B11111111,B11111111,B11111111, - B11111111,B11111111,B11111111,B10000000,B00000000,B00000001,B11110011,B11100000,B00000000,B00000111,B11111111,B11111111,B10000000,B00000000,B00000000,B00000000, - B11111111,B11111111,B11111110,B00000000,B00000000,B00000000,B01110001,B11100000,B00000000,B00011111,B11111111,B11111110,B00000000,B00000000,B00000000,B00000000, - B11111111,B11111111,B11111100,B00000000,B00000000,B00000000,B00110001,B11100000,B00000000,B00011111,B11111111,B11111100,B00000000,B00000000,B00000000,B00000000, - B11111111,B11111111,B11111000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11111111,B11110000,B00000000,B00000000,B00000000,B00000000, - B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001110,B11111111,B11000000,B00000000,B00000000,B00000000,B00000000, - B11111111,B11111111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11101110,B00000000,B00000000,B00000000,B00000000,B00000000, - B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001110,B11101110,B00000000,B00000000,B00000000,B00000000,B00000000, - B11111111,B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001101,B11001110,B00000000,B00000000,B00000000,B00000000,B00000000, - B11111111,B11111000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11001110,B00000000,B00000000,B00000000,B00000000,B00000000, - B11111111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001101,B11001110,B00000000,B00000000,B00000000,B00000000,B00000000, - B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001101,B10000100,B00000000,B00000000,B00000000,B00000000,B00000000, - B11111111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B11111110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B11111000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B01100000,B11000110,B00000000,B01110000,B00000000,B00001110,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000, - B00000000,B00000000,B11110001,B11100110,B00000000,B01110000,B00000000,B00001110,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000, - B00000000,B00000000,B11110001,B11100000,B00000000,B01110000,B00000000,B00001110,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000, - B00000000,B00000000,B11111011,B11100000,B00000000,B01110000,B00000000,B00001110,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000, - B00000000,B00000000,B11111111,B11100110,B00011111,B01110111,B00001111,B10001110,B11111100,B01111111,B00011111,B11100111,B11000111,B00011111,B00000000,B00000000, - B00000000,B00000000,B11111111,B11100110,B00111111,B01111111,B10011111,B11001110,B11111110,B01111111,B00111111,B11101111,B11100111,B00111111,B10000000,B00000000, - B00000000,B00000000,B11101110,B11100110,B01111011,B01111111,B10011000,B11001110,B11001110,B01111111,B10111101,B11101100,B01100111,B01111011,B11000000,B00000000, - B00000000,B00000000,B11101110,B11100110,B01110000,B01110011,B10111111,B11101110,B00111110,B01110011,B10110000,B11011111,B11110111,B01110001,B11000000,B00000000, - B00000000,B00000000,B11100100,B11100110,B01100000,B01110011,B10111111,B11101110,B11111110,B01110011,B10110000,B11011111,B11110111,B01110001,B11000000,B00000000, - B00000000,B00000000,B11100100,B11100110,B01100000,B01110011,B10011000,B00001110,B11001110,B01110011,B10110000,B11001100,B00000111,B01110001,B11000000,B00000000, - B00000000,B00000000,B11100000,B11100110,B01110000,B01110011,B10011000,B00001110,B11001110,B01110011,B10111001,B11001100,B00000111,B01110001,B11000000,B00000000, - B00000000,B00000000,B11100000,B11100110,B01111111,B01110011,B10011111,B11001110,B11111110,B01110011,B10111111,B11101111,B11100111,B01111111,B11000000,B00000000, - B00000000,B00000000,B11100000,B11100110,B00111111,B01110011,B10001111,B11001110,B11111110,B01110011,B10011111,B11100111,B11100111,B00111111,B10000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00001110,B00110001,B10000111,B00001100,B01110110,B01100011,B00111001,B11000011,B10000110,B00001110,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B10000000,B00000000,B00000000,B00000000,B00000000 -}; diff --git a/config/examples/Tevo/Nereus/Configuration.h b/config/examples/Tevo/Nereus/Configuration.h deleted file mode 100755 index a2f47ed972..0000000000 --- a/config/examples/Tevo/Nereus/Configuration.h +++ /dev/null @@ -1,2210 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(thisiskeithb & Rob Cad, Tevo Nereus)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 3 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT_2 1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 115200 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_MKS_ROBIN_NANO -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Tevo Nereus" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 110 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Tevo Nereus - #define DEFAULT_Kp 12.13 - #define DEFAULT_Ki 0.82 - #define DEFAULT_Kd 44.71 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80.4, 80.4, 400, 370 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 10, 70 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 200, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 5000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 1500 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR false -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 320 -#define Y_BED_SIZE 320 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 400 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 200 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12149 - #define XPT2046_Y_CALIBRATION -8746 - #define XPT2046_X_OFFSET -35 - #define XPT2046_Y_OFFSET 256 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Tevo/Nereus/Configuration_adv.h b/config/examples/Tevo/Nereus/Configuration_adv.h deleted file mode 100755 index d9676927e9..0000000000 --- a/config/examples/Tevo/Nereus/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN FAN1_PIN -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_24V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Tevo/Nereus/_Bootscreen.h b/config/examples/Tevo/Nereus/_Bootscreen.h deleted file mode 100755 index ed50531835..0000000000 --- a/config/examples/Tevo/Nereus/_Bootscreen.h +++ /dev/null @@ -1,90 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Custom Boot Screen bitmap - * - * Place this file in the root with your configuration files - * and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h. - * - * Use the Marlin Bitmap Converter to make your own: - * http://marlinfw.org/tools/u8glib/converter.html - */ - -#define CUSTOM_BOOTSCREEN_BMPWIDTH 120 - -const unsigned char custom_start_bmp[] PROGMEM = { - B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,B11111111,B11111111,B11111111,B11110001,B11111111,B11111111,B11111111,B11100000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B01111111,B11111111,B11111111,B11111111,B11100011,B11111111,B11111111,B11111111,B11000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111111,B11111111,B11000111,B11111111,B11111111,B11111111,B10000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11111111,B11111111,B11111111,B10001111,B11111111,B11111111,B11111111,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11111000,B00000000,B00011111,B11100011,B11111000,B11111110,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11110011,B11111100,B01111111,B00011111,B11000111,B11110001,B11111100,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111001,B11111110,B01111111,B10001111,B10001111,B11100011,B11111000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11111100,B11111111,B00111111,B11000111,B00011111,B11000111,B11110000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111110,B01111111,B10011111,B11100010,B00111111,B10001111,B11100000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,B00111111,B11001111,B11110000,B01111111,B00011111,B11000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111111,B10011111,B11000111,B11111000,B11111110,B00111111,B10000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B10001111,B11100011,B11111101,B11111100,B01111111,B10000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11000111,B11110001,B11111111,B11111000,B11111111,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11100011,B11111000,B11111111,B11111001,B11111110,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11110001,B11111100,B01111111,B11110011,B11111100,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11111000,B11111110,B00111111,B11100111,B11111000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111100,B01111111,B00011111,B11000111,B11110000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111110,B00111111,B10001111,B11100011,B11100000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,B00011111,B11000111,B11110001,B11000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111111,B10001111,B11100011,B11111000,B10000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11001111,B11110001,B11111100,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100111,B11111001,B11111110,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11110011,B11110001,B11111100,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111001,B11100011,B11111000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11111100,B11000111,B11110000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111110,B00001111,B11100000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111110,B00011111,B11000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111111,B00111111,B10000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B10000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11111110,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11100000,B00000111,B11111100,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000011,B11111110,B00000000,B00110000,B00000011,B11111000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00111111,B10000000,B00000000,B00000000,B00000001,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000001,B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00001111,B11000000,B00000000,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B01111100,B00000000,B00000001,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000011,B11100000,B00000000,B00000011,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00011111,B00000000,B00000000,B00000011,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B11111000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000011,B11100000,B00000000,B00000000,B00001110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00011111,B00000000,B00000000,B00000000,B00001110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B01111100,B00000000,B00000000,B00000000,B00011100,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B11100000,B00000000,B00000000,B00000000,B00111000,B00000011,B11111100,B00000000,B00000000,B00000011,B10000000,B00000000,B00011111,B10000000, - B00000011,B11000000,B00000000,B00000000,B00000000,B00111000,B00000111,B10011100,B00000000,B00011111,B00000111,B11000000,B00000111,B11111011,B10000000, - B00000111,B10000000,B00000000,B00000000,B00000000,B01110000,B00001110,B00111000,B00000000,B01111111,B00001111,B11100000,B00000111,B11100001,B11000000, - B00000111,B00000000,B00000000,B00000000,B00000000,B11100000,B00011100,B11110000,B00000001,B11100111,B00001110,B01111100,B00011111,B10000011,B11000000, - B00000011,B00000000,B00000000,B00000000,B00000000,B11100000,B00111111,B11000000,B00000111,B10000111,B00011100,B00011111,B11111110,B00000111,B10000000, - B00000000,B00000000,B00000000,B00000000,B00000001,B11000000,B00111111,B00000000,B00011110,B00000110,B00111000,B00000011,B11111100,B00001111,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00111100,B00000000,B11111000,B00001110,B01110000,B00000111,B10011000,B00111110,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000011,B10000000,B00111100,B00001111,B11000000,B00001111,B11100000,B00000100,B00111000,B11111000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000011,B00000000,B00011111,B11111111,B00000000,B00001111,B10000000,B00000000,B00111111,B11100000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000110,B00000000,B00000111,B11100000,B00000000,B00000110,B00000000,B00000000,B00011110,B00000000,B00000000 -}; diff --git a/config/examples/Tevo/Tarantula Pro/Configuration.h b/config/examples/Tevo/Tarantula Pro/Configuration.h deleted file mode 100644 index ead2efd016..0000000000 --- a/config/examples/Tevo/Tarantula Pro/Configuration.h +++ /dev/null @@ -1,2231 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(thisiskeithb, Tevo Tarantula Pro)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_MKS_GEN_L -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Tarantula Pro" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 140 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Tevo Tarantula Pro - #define DEFAULT_Kp 26.27 - #define DEFAULT_Ki 2.49 - #define DEFAULT_Kd 69.41 - - // Ultimaker - //#define DEFAULT_Kp 22.2 - //#define DEFAULT_Ki 1.08 - //#define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80.058, 80.058, 399.2901, 408 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 400, 400, 50, 45 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 10000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 1500 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.04 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 0, 18, -1.5 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 15000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 240 -#define Y_BED_SIZE 240 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS -12 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 260 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 200 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h deleted file mode 100755 index 2a0f14c796..0000000000 --- a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN 7 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 75 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 160 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - #define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -//#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_24V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Tevo/Tarantula Pro/_Bootscreen.h b/config/examples/Tevo/Tarantula Pro/_Bootscreen.h deleted file mode 100644 index b5b8dcb131..0000000000 --- a/config/examples/Tevo/Tarantula Pro/_Bootscreen.h +++ /dev/null @@ -1,80 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Made with Marlin Bitmap Converter - * http://marlinfw.org/tools/u8glib/converter.html - * - * This bitmap from 128x48 C/C++ data - */ -#define CUSTOM_BOOTSCREEN_BMPWIDTH 128 -const unsigned char custom_start_bmp[] PROGMEM = { - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00010010,B00000000,B10011000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100100,B00000000,B11001000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01101100,B00000000,B01001100,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11001000,B00000000,B01100100,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B10011000,B00000000,B00100110,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B10010000,B00000000,B00110011,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B00110000,B00000000,B00011011,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B00110000,B00000000,B00011001,B10000000,B00000000,B00000000,B00000000, - B00000000,B00000010,B00000000,B00001000,B00000000,B00000000,B00000000,B00000010,B00000011,B00110000,B00000000,B00011001,B10000000,B00000000,B00000001,B00000000, - B00000011,B11100010,B00111110,B00001100,B01100111,B01111101,B10011001,B10000011,B00000011,B01110000,B00000000,B00001001,B10000011,B11000111,B11000111,B10000000, - B00000011,B11100110,B00111111,B00011100,B01100111,B01111101,B10011001,B10000111,B00000110,B01110000,B00000000,B00011100,B11000011,B11100111,B11001110,B11000000, - B00000001,B10000111,B00111011,B10011100,B01100011,B00110001,B10011001,B10000111,B10000110,B01110000,B00000000,B00011100,B11000011,B01110110,B11101100,B11000000, - B00000001,B10001111,B00111001,B10011110,B01110011,B00110001,B10011001,B10000111,B10000110,B01111100,B00000000,B01111100,B11000011,B00110110,B01101100,B11000000, - B00000001,B10001111,B00111001,B10011110,B01111111,B00110001,B10011001,B10000111,B10000110,B01001111,B00000001,B11100000,B11000011,B00110110,B01101100,B11100000, - B00000001,B10001111,B10111011,B00110110,B01111111,B00110001,B10011001,B10000111,B10000111,B00000011,B00000001,B10000001,B11000011,B01100110,B11101100,B11100000, - B00000001,B10011001,B10111111,B00110110,B01111111,B00110001,B10011001,B10001100,B10000111,B11111101,B11111111,B01111111,B11000011,B11100111,B11001100,B11100000, - B00000001,B10011001,B10111110,B00110110,B01101111,B00110001,B10011001,B10001100,B11000110,B00111110,B11111111,B11111001,B11000011,B11000111,B11001100,B11100000, - B00000001,B10011111,B10111011,B00111111,B01100111,B00110001,B10011001,B10001111,B11000100,B00000001,B11111111,B00000000,B01000011,B00000110,B11001100,B11000000, - B00000001,B10011111,B10111011,B00111111,B01100111,B00110001,B10011001,B10001111,B11000000,B11110001,B11111111,B00011110,B00000011,B00000110,B11001100,B11000000, - B00000001,B10011001,B10111011,B10110011,B01100011,B00110001,B11111011,B11001100,B11000000,B11111111,B11111111,B11111110,B00000011,B00000110,B11101111,B11000000, - B00000001,B10011001,B10111011,B11100011,B01100001,B00110000,B11110011,B11111100,B11000001,B11111011,B11111111,B10111111,B00000011,B00000110,B11100111,B10000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B10011111,B11111111,B11110011,B10000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001110,B00111100,B11111110,B01111000,B11100000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111100,B00111001,B11111111,B00111000,B01111000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111000,B00110001,B11111111,B00011000,B00111110,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11110000,B00110011,B11111111,B00011000,B00011110,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11100000,B00110011,B11111111,B10011000,B00011100,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B01110011,B11111111,B00001100,B00001100,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B11100001,B11111111,B00001110,B00011100,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01110000,B11110001,B11111111,B00001110,B00011000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01110001,B11111111,B00011100,B00011000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01110001,B11111111,B00011100,B00011000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00010000,B00110000,B11111110,B00011000,B00010000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00011000,B00110000,B11111110,B00011000,B00010000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00011000,B00110000,B01111100,B00011000,B00110000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001000,B00110000,B01111100,B00011000,B00100000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001100,B00010000,B01111000,B00010000,B00100000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000100,B00010000,B00111000,B00110000,B01000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000100,B00011000,B00010000,B00110000,B01000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000100,B00011000,B00000000,B00110000,B11000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000010,B00011000,B00000000,B00110000,B10000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000010,B00001000,B00000000,B00100000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001000,B00000000,B00100000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001000,B00000000,B00100000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001000,B00000000,B00100000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001000,B00000000,B01000000,B00000000,B00000000,B00000000,B00000000 -}; diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h deleted file mode 100644 index a50339f9c7..0000000000 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration.h +++ /dev/null @@ -1,2231 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(thisiskeithb, Tevo Tornado V1)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_MKS_BASE_15 -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Tornado" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 5 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 5 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 285 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Tevo Tornado V1 - #define DEFAULT_Kp 20.37 - #define DEFAULT_Ki 1.50 - #define DEFAULT_Kd 69.26 - - // Ultimaker - //#define DEFAULT_Kp 22.2 - //#define DEFAULT_Ki 1.08 - //#define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 128.82 - #define DEFAULT_bedKi 16.91 - #define DEFAULT_bedKd 245.36 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 600 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 79.765, 79.765, 399.2901, 400 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 250, 250, 30, 55 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 2000, 2000, 120, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 10000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 1500 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 8.0 - #define DEFAULT_YJERK 8.0 - #define DEFAULT_ZJERK 0.4 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.026 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { -45, -12, -2.77 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR false -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 320 -#define Y_BED_SIZE 300 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 400 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - #define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 200 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 WESTERN - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h deleted file mode 100755 index 268d5012b1..0000000000 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN 7 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 75 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 160 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - #define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - #define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - #define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - #define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_24V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h deleted file mode 100644 index 06a29799be..0000000000 --- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration.h +++ /dev/null @@ -1,2234 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(thisiskeithb, Tevo Tornado V2)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_MKS_GEN_L -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Tornado" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 5 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 5 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 285 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Tevo Tornado V2 - #define DEFAULT_Kp 20.37 - #define DEFAULT_Ki 1.50 - #define DEFAULT_Kd 69.26 - - // Ultimaker - //#define DEFAULT_Kp 22.2 - //#define DEFAULT_Ki 1.08 - //#define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 128.82 - #define DEFAULT_bedKi 16.91 - #define DEFAULT_bedKd 245.36 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 600 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 79.765, 79.765, 399.2901, 400 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 250, 250, 30, 55 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 2000, 2000, 120, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 10000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 1500 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 8.0 - #define DEFAULT_YJERK 8.0 - #define DEFAULT_ZJERK 0.4 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.026 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { -45, -12, -2.77 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR false -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 320 -#define Y_BED_SIZE 300 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 400 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - #define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 200 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 WESTERN - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER -#define ST7920_DELAY_1 DELAY_NS(150) -#define ST7920_DELAY_2 DELAY_NS(150) -#define ST7920_DELAY_3 DELAY_NS(150) - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h deleted file mode 100755 index 268d5012b1..0000000000 --- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN 7 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 75 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 160 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - #define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - #define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - #define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - #define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_24V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Tevo/Tornado/_Bootscreen.h b/config/examples/Tevo/Tornado/_Bootscreen.h deleted file mode 100644 index ebec255674..0000000000 --- a/config/examples/Tevo/Tornado/_Bootscreen.h +++ /dev/null @@ -1,85 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Made with Marlin Bitmap Converter - * http://marlinfw.org/tools/u8glib/converter.html - */ -#define CUSTOM_BOOTSCREEN_TIMEOUT 1500 -#define CUSTOM_BOOTSCREEN_BMPWIDTH 112 - -const unsigned char custom_start_bmp[] PROGMEM = { - B00000000,B00000000,B00011111,B11111111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00011111,B11111111,B11111111,B11111111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000001,B11111111,B11111111,B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00001111,B11111110,B00000000,B00001111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00111111,B00000000,B00000000,B00000000,B00000011,B11111111,B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B01111000,B00000000,B00000000,B00000000,B00000000,B00001111,B11111110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B11100000,B01111111,B11000000,B00000000,B00000000,B00000000,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B11001111,B11110000,B00000000,B00000000,B00000000,B00000000,B00011111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B11111110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B01111100,B00000000,B00000000,B00000000,B00000000,B00011110,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00011110,B00000000,B00000000,B00000000,B00000000,B00000111,B11001111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000111,B10000000,B00000000,B00000000,B00000000,B00000111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00010000,B11111100,B00000000,B00000000,B00000000,B00011111,B11111110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00010000,B00011111,B11111000,B00000000,B00000011,B11111110,B00111110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00011000,B00000000,B01111111,B11111111,B11111111,B11000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00011100,B00000000,B00000000,B00000000,B00000000,B00000011,B11111000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00001110,B00000000,B00000000,B00000000,B00000000,B00011111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000011,B10000000,B00000000,B00000000,B00000010,B11111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000001,B11100000,B00000000,B00000000,B00001111,B11111111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00111000,B00000000,B00000000,B11111111,B11100111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000100,B00000000,B00000011,B11100000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00011110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B01100000,B00000000,B00000000,B00000000,B01111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00110000,B00000000,B00000000,B00000001,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00011100,B00000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000111,B10000000,B00000000,B11111110,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B01000000,B00000001,B00000000,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000001,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00001111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B01111110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000011,B11110110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B10000000,B00000000,B00001110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01000000,B00000000, - B00000000,B00000000,B01110000,B00000000,B00111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00000000, - B00000000,B00000000,B00111000,B00000000,B11111000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11000000,B00000000, - B00000000,B00000000,B00001100,B00000111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B10000000,B00000000, - B00000000,B00000000,B00000000,B00001100,B00110000,B00000000,B00000000,B10000000,B00000000,B00110000,B00000000,B11111000,B00000111,B11000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B01110000,B00011111,B11011111,B11111110,B11111110,B01111000,B00110011,B11111000,B01100111,B11000011,B11111000, - B00000000,B00000000,B00000000,B00000000,B11100000,B01111111,B11111111,B11111111,B01111110,B11111000,B11111111,B11110001,B11111111,B11000111,B11111100, - B00000000,B00000000,B00000000,B00000011,B11000001,B11111111,B11111111,B11011111,B10111111,B11111101,B11111111,B11110011,B11111111,B11001111,B11111110, - B00000000,B00000000,B00000000,B00000111,B01100001,B11111111,B11100111,B10111111,B10111111,B11111101,B11111111,B11110111,B11111111,B11011111,B11111110, - B00000000,B00000000,B00000000,B00000000,B01100001,B11100000,B01100111,B10111111,B10111111,B11111111,B11111111,B11110111,B11111111,B11111110,B00001110, - B00000000,B00000000,B00000000,B00000001,B11000001,B11000000,B01100111,B10111111,B00111111,B01111011,B10000001,B11100111,B00000111,B10111000,B00001110, - B00000000,B00000000,B00000000,B00011111,B10000001,B10000001,B11100111,B11000000,B00111110,B01111011,B11101111,B11100111,B11111111,B10111000,B00011100, - B00000000,B00000000,B00000000,B00001111,B00000001,B11111111,B11100111,B11100000,B00011110,B01111011,B11111111,B11111111,B11111111,B11111111,B11111100, - B00000000,B00000000,B00000000,B00111111,B10000000,B11111111,B11001111,B11111000,B01111110,B01111011,B11111111,B11111111,B11111111,B11111111,B11111100, - B00000000,B00000000,B00000000,B00111111,B00000000,B01111111,B10011111,B11111000,B01111110,B01111001,B11111111,B11111011,B11110111,B11101111,B11111000, - B00000000,B00000000,B00000000,B00011111,B00000000,B00111111,B00011110,B00000000,B00000010,B01111111,B11110001,B00000000,B00000100,B00000011,B11110000, - B00000000,B00000000,B00000000,B00001100,B00000000,B00000000,B00000000,B00000000,B00000000,B00001110,B00000000,B00000000,B00000000,B00000000,B00000000 -}; diff --git a/config/examples/TheBorg/Configuration.h b/config/examples/TheBorg/Configuration.h deleted file mode 100644 index a4fed7cdf8..0000000000 --- a/config/examples/TheBorg/Configuration.h +++ /dev/null @@ -1,2226 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(Spawn32, The_Borg)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT -1 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 5 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 115200 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_THE_BORG -#endif - -// Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 5 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 5 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - #define DEFAULT_Kp 18.21 - #define DEFAULT_Ki 1.42 - #define DEFAULT_Kd 58.34 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 554.16 - #define DEFAULT_bedKi 64.07 - #define DEFAULT_bedKd 1198.25 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 200, 200, 800, 280 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 32, 5, -1.3 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 1 -#define Y_ENABLE_ON 1 -#define Z_ENABLE_ON 1 -#define E_ENABLE_ON 1 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR true -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 213 -#define Y_BED_SIZE 220 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -//#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/TheBorg/Configuration_adv.h b/config/examples/TheBorg/Configuration_adv.h deleted file mode 100644 index a1605c8853..0000000000 --- a/config/examples/TheBorg/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 50 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 6 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 100 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -//#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -//#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/TinyBoy2/Configuration.h b/config/examples/TinyBoy2/Configuration.h deleted file mode 100644 index 5daff15e71..0000000000 --- a/config/examples/TinyBoy2/Configuration.h +++ /dev/null @@ -1,2282 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -/** - * Sample configuration file for TinyBoy2 L10/L16 - * - * Compile from Arduino or using make: - * - * ARDUINO_INSTALL_DIR=/usr/share/java/Arduino-1.6.13/ \ - * HARDWARE_MOTHERBOARD=66 \ - * PATH=/usr/avr/bin/:$PATH make - * - * Please choose your hardware options for the TinyBoy2: - */ - -#define TB2_L10 -//#define TB2_L16 -#define TB2_HEATBED_MOD - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(StefanB, TinyBoy2)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 115200 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_MELZI -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#if ENABLED(TB2_L10) - #define CUSTOM_MACHINE_NAME "TinyBoy2 L10" -#elif ENABLED(TB2_L16) - #define CUSTOM_MACHINE_NAME "TinyBoy2 L16" -#else - #error "Please select TB2_L10 or TB2_L16" -#endif - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 5 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#if ENABLED(TB2_HEATBED_MOD) - // K8200 Heatbed 1206/100k/3950K spare part - #define TEMP_SENSOR_BED 7 -#else - #define TEMP_SENSOR_BED 0 -#endif -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 250 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 100 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - //#define DEFAULT_Kp 22.2 - //#define DEFAULT_Ki 1.08 - //#define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - - // TinyBoy2 Extruder - calculated with PID Autotune and tested - // "M303 E0 C8 S200" - //#define DEFAULT_Kp 25.63 - //#define DEFAULT_Ki 2.66 - //#define DEFAULT_Kd 61.73 - - // TinyBoy2 Extruder - same, but with fan @ 25% duty - #define DEFAULT_Kp 26.15 - #define DEFAULT_Ki 2.71 - #define DEFAULT_Kd 63.02 -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - //#define DEFAULT_bedKp 10.00 - //#define DEFAULT_bedKi .023 - //#define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. - - // TinyBoy2 heatbed - calculated with PID Autotune and tested - // "M303 E-1 C8 S75" - //#define DEFAULT_bedKp 421.80 - //#define DEFAULT_bedKi 82.51 - //#define DEFAULT_bedKd 539.06 - - // TinyBoy2 heatbed - same, but with fan @ 25% duty - // "M303 E-1 C8 S75" - #define DEFAULT_bedKp 267.54 - #define DEFAULT_bedKi 52.34 - #define DEFAULT_bedKd 341.92 - -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -// TB2 has X endstop on max, see also INVERT_X_DIR and X_HOME_DIR -//#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 6400, 88.16 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 7, 35 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 34, 15, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR false -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR 1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -// Tinyboy2: 100mm are marketed, actual length between endstop and end of rail is 98mm -#define X_BED_SIZE 98 -#define Y_BED_SIZE 98 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#if ENABLED(TB2_L10) - #define Z_MAX_POS 98 -#else - #define Z_MAX_POS 158 -#endif - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (40*60) -#define HOMING_FEEDRATE_Z (3*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 90 // TB2: ABS default 110, 90 is the maximum temp at 12V supply -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/TinyBoy2/Configuration_adv.h b/config/examples/TinyBoy2/Configuration_adv.h deleted file mode 100644 index 557d065509..0000000000 --- a/config/examples/TinyBoy2/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - #define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G27" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -//#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. -#define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 64 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - //#define USER_DESC_5 "Home & Info" - //#define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Tronxy/X1/Configuration.h b/config/examples/Tronxy/X1/Configuration.h deleted file mode 100644 index 9cf5e5f9e0..0000000000 --- a/config/examples/Tronxy/X1/Configuration.h +++ /dev/null @@ -1,2226 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(Claus Naeveke, 0.1)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 115200 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_MELZI -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Tronxy X1" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 11 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 0 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 260 -#define HEATER_1_MAXTEMP 260 -#define HEATER_2_MAXTEMP 260 -#define HEATER_3_MAXTEMP 260 -#define HEATER_4_MAXTEMP 260 -#define HEATER_5_MAXTEMP 260 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Tronxy X1 - #define DEFAULT_Kp 16.20 - #define DEFAULT_Ki 1.11 - #define DEFAULT_Kd 59.06 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 1600, 90 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 400, 400, 2, 50 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 400, 400, 40, 5000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 20.0 - #define DEFAULT_YJERK 20.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.053 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR false -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 150 -#define Y_BED_SIZE 150 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS -10 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 150 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - #define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Tronxy/X3A/Configuration.h b/config/examples/Tronxy/X3A/Configuration.h deleted file mode 100644 index 6e8d6ba63c..0000000000 --- a/config/examples/Tronxy/X3A/Configuration.h +++ /dev/null @@ -1,2230 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(Schullebernd, Tronxy X3A)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_MELZI //63 -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Tronxy X3A" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 6 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 501 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 130 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - #define DEFAULT_Kp 22.2 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 210 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 400, 90 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 400, 400, 4, 50 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 1000, 1000, 1500, 5000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 15.0 - #define DEFAULT_YJERK 15.0 - #define DEFAULT_ZJERK 0.4 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.09 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { -32, -10, -0.5 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 50 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 6000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR false -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 220 -#define Y_BED_SIZE 220 - -// Tronxy X3A specific offsets -#define TRONXY_X_BED_OFFSET -17 -#define TRONXY_Y_BED_OFFSET -25 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS TRONXY_X_BED_OFFSET -#define Y_MIN_POS TRONXY_Y_BED_OFFSET -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE - (2 * TRONXY_X_BED_OFFSET) -#define Y_MAX_POS Y_BED_SIZE - (TRONXY_Y_BED_OFFSET + 5) -#define Z_MAX_POS 316 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -#define MANUAL_X_HOME_POS TRONXY_X_BED_OFFSET // The X3A has a standard X offset (17mm) between the left endstop and bed left bed edge -#define MANUAL_Y_HOME_POS TRONXY_Y_BED_OFFSET // The X3A has a standard Y offset (25mm) between the y endstop and the front bet edge -#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (100*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -//#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 210 -#define PREHEAT_1_TEMP_BED 60 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 225 -#define PREHEAT_2_TEMP_BED 85 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Tronxy/X3A/Configuration_adv.h b/config/examples/Tronxy/X3A/Configuration_adv.h deleted file mode 100644 index e6ef5ba827..0000000000 --- a/config/examples/Tronxy/X3A/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 10 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 10 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -//#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Tronxy/X5S-2E/Configuration.h b/config/examples/Tronxy/X5S-2E/Configuration.h deleted file mode 100644 index aacbf86de3..0000000000 --- a/config/examples/Tronxy/X5S-2E/Configuration.h +++ /dev/null @@ -1,2247 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(Anthony Rich, OEM stock config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 115200 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_TRONXY_V3_1_0 -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Tronxy X5S-2E" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 2 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// Tronxy X5S-2E: -// The OEM stock model uses an E3D Cyclops clone hotend (2 in 1 out, color mixing) for 1.75mm filament. -// For Cyclops or any "multi-extruder" that shares a single nozzle. -#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -// Tronxy X5S-2E: -// WARNING: Never exceed 260C. The OEM stock model uses low temperature heat breaks with PTFE-lining. -#define HEATER_0_MAXTEMP 260 -#define HEATER_1_MAXTEMP 260 -#define HEATER_2_MAXTEMP 260 -#define HEATER_3_MAXTEMP 260 -#define HEATER_4_MAXTEMP 260 -#define HEATER_5_MAXTEMP 260 -// Tronxy X5S-2E: -// The OEM stock model uses a clone MK3a 300 @ 12V with no insulation and can reach a maximum 70C at 25C ambient. -#define BED_MAXTEMP 81 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - //// Ultimaker - //#define DEFAULT_Kp 22.2 - //#define DEFAULT_Ki 1.08 - //#define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - - // Tronxy X5S-2E: - // The OEM stock model uses an E3D Cyclops clone hotend (2 in 1 out, color mixing) and a long 12V/40W heater catridge. - // Tested with command(s): "M301 P50 I5 D100" and "M303 C10 E0 S210" - #define DEFAULT_Kp 26.19 - #define DEFAULT_Ki 2.41 - #define DEFAULT_Kd 71.28 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - // //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - // //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - // #define DEFAULT_bedKp 10.00 - // #define DEFAULT_bedKi .023 - // #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // Tronxy X5S-2E: - // The OEM stock model uses a clone MK3a 300 @ 12V with no insulation and can reach a maximum 70C at 25C ambient. - // Tested with commands: "M304 P100 I20 D500" and "M303 C10 E-1 S65" - #define DEFAULT_bedKp 379.43 - #define DEFAULT_bedKi 72.37 - #define DEFAULT_bedKd 497.33 - -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -// Tronxy X5S-2E: -// The OEM stock model uses HEROIC HR4982MTE982 drivers, similar to A4988 but with 2 step jumpers instead of 3. -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 94 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 1000, 1000, 100, 1000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 20.0 - #define DEFAULT_YJERK 20.0 - #define DEFAULT_ZJERK 0.4 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.16 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 330 -#define Y_BED_SIZE 330 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 400 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 190 -#define PREHEAT_1_TEMP_BED 50 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 230 -#define PREHEAT_2_TEMP_BED 70 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -#define NOZZLE_PARK_FEATURE P2 - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -#define NUM_SERVOS 2 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300, 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Tronxy/X5S-2E/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Configuration_adv.h deleted file mode 100644 index 7b6c991fe4..0000000000 --- a/config/examples/Tronxy/X5S-2E/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 30 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - #define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G27" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -//#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Tronxy/X5S/Configuration.h b/config/examples/Tronxy/X5S/Configuration.h deleted file mode 100644 index d653211b51..0000000000 --- a/config/examples/Tronxy/X5S/Configuration.h +++ /dev/null @@ -1,2226 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 115200 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_MELZI_TRONXY -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Tronxy X5S" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - #define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - #define DEFAULT_Kp 22.2 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 600 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 90 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 400, 400, 4, 150 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 1000, 1000, 1000, 1000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 18.0 - #define DEFAULT_YJERK 18.0 - #define DEFAULT_ZJERK 0.4 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.13 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { -45, -55, -0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 10 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 340 -#define Y_BED_SIZE 315 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 400 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 50 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Tronxy/XY100/Configuration.h b/config/examples/Tronxy/XY100/Configuration.h deleted file mode 100644 index 1f5d3b17cf..0000000000 --- a/config/examples/Tronxy/XY100/Configuration.h +++ /dev/null @@ -1,2237 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(Rob Griffiths, default config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_MELZI -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "TronXY XY100" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 0 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - // #define DEFAULT_Kp 22.2 - // #define DEFAULT_Ki 1.08 - // #define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - - // TronXY XY-100 Standard Extruder at 210 Degree Celsius and 100% Fan - // (measured after M106 S255 with M303 E0 S210 C8) - // #define DEFAULT_Kp 20.32 - // #define DEFAULT_Ki 1.18 - // #define DEFAULT_Kd 87.80 - - // TronXY XY-100 Standard Extruder, from original firmware - #define DEFAULT_Kp 7.0000 - #define DEFAULT_Ki 2.0000 - #define DEFAULT_Kd 40.0000 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 1600, 90 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 400, 400, 4, 50 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 1000, 5000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 20.0 - #define DEFAULT_YJERK 20.0 - #define DEFAULT_ZJERK 0.4 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.16 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR false -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 120 -#define Y_BED_SIZE 140 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS -10 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 130 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 200 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/UltiMachine/Archim1/Configuration.h b/config/examples/UltiMachine/Archim1/Configuration.h deleted file mode 100644 index 6639d639ee..0000000000 --- a/config/examples/UltiMachine/Archim1/Configuration.h +++ /dev/null @@ -1,2226 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT -1 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_ARCHIM1 -#endif - -// Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 0 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - #define DEFAULT_Kp 22.2 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -#define X_DRIVER_TYPE DRV8825 -#define Y_DRIVER_TYPE DRV8825 -#define Z_DRIVER_TYPE DRV8825 -#define X2_DRIVER_TYPE DRV8825 -#define Y2_DRIVER_TYPE DRV8825 -#define Z2_DRIVER_TYPE DRV8825 -//#define Z3_DRIVER_TYPE DRV8825 -#define E0_DRIVER_TYPE DRV8825 -#define E1_DRIVER_TYPE DRV8825 -#define E2_DRIVER_TYPE DRV8825 -#define E3_DRIVER_TYPE DRV8825 -//#define E4_DRIVER_TYPE DRV8825 -//#define E5_DRIVER_TYPE DRV8825 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 200, 200, 800, 500 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -//#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/UltiMachine/Archim1/Configuration_adv.h b/config/examples/UltiMachine/Archim1/Configuration_adv.h deleted file mode 100644 index 8fcc910ab9..0000000000 --- a/config/examples/UltiMachine/Archim1/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -#define MICROSTEP1 LOW,LOW,LOW -#define MICROSTEP2 HIGH,LOW,LOW -#define MICROSTEP4 LOW,HIGH,LOW -#define MICROSTEP8 HIGH,HIGH,LOW -#define MICROSTEP16 LOW,LOW,HIGH -#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 32, 32, 32, 32, 32, 32 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -#define PWM_MOTOR_CURRENT { 1200, 1200, 1200 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -//#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/UltiMachine/Archim2/Configuration.h b/config/examples/UltiMachine/Archim2/Configuration.h deleted file mode 100644 index 47aba4e3cd..0000000000 --- a/config/examples/UltiMachine/Archim2/Configuration.h +++ /dev/null @@ -1,2226 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_ARCHIM2 -#endif - -// Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 0 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - #define DEFAULT_Kp 22.2 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -#define X_DRIVER_TYPE TMC2130 -#define Y_DRIVER_TYPE TMC2130 -#define Z_DRIVER_TYPE TMC2130 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE TMC2130 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 500 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -//#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/UltiMachine/Archim2/Configuration_adv.h b/config/examples/UltiMachine/Archim2/Configuration_adv.h deleted file mode 100644 index fd8eba2ea6..0000000000 --- a/config/examples/UltiMachine/Archim2/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -//#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -//#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/VORONDesign/Configuration.h b/config/examples/VORONDesign/Configuration.h deleted file mode 100644 index 20435576e5..0000000000 --- a/config/examples/VORONDesign/Configuration.h +++ /dev/null @@ -1,2235 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 115200 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_VORON -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "VORON 2.0" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 2 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -#define HOTEND_OFFSET_X { 0.0, -18.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 5 -#define TEMP_SENSOR_1 5 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - //#define DEFAULT_Kp 22.2 - //#define DEFAULT_Ki 1.08 - //#define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - - // from VORON - #define DEFAULT_Kp 23.72 - #define DEFAULT_Ki 1.56 - #define DEFAULT_Kd 90.34 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 205 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - //#define DEFAULT_bedKp 10.00 - //#define DEFAULT_bedKi .023 - //#define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. - // Results from VORON - #define DEFAULT_bedKp 150.52 - #define DEFAULT_bedKi 12.25 - #define DEFAULT_bedKd 462.40 -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - #define ENDSTOPPULLUP_XMAX - #define ENDSTOPPULLUP_YMAX - #define ENDSTOPPULLUP_ZMAX - #define ENDSTOPPULLUP_XMIN - #define ENDSTOPPULLUP_YMIN - #define ENDSTOPPULLUP_ZMIN - #define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -#define X_DRIVER_TYPE DRV8825 -#define Y_DRIVER_TYPE DRV8825 -#define Z_DRIVER_TYPE DRV8825 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE DRV8825 -#define E1_DRIVER_TYPE DRV8825 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 608, 608 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 75, 75 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 , 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 20.0 - #define DEFAULT_YJERK 15.0 - #define DEFAULT_ZJERK 0.4 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.03 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 0 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 3 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR false -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 230 -#define Y_BED_SIZE 230 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 230 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -//#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -//#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - #define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 200 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 100 // (°C) Defaultbed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 15 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 12 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -#define ENCODER_PULSES_PER_STEP 2 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/VORONDesign/Configuration_adv.h b/config/examples/VORONDesign/Configuration_adv.h deleted file mode 100644 index a3da1f2666..0000000000 --- a/config/examples/VORONDesign/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -//#define E0_AUTO_FAN_PIN -1 -//#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -//#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/VORONDesign/_Bootscreen.h b/config/examples/VORONDesign/_Bootscreen.h deleted file mode 100644 index 84a214b509..0000000000 --- a/config/examples/VORONDesign/_Bootscreen.h +++ /dev/null @@ -1,82 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Made with Marlin Bitmap Converter - * http://marlinfw.org/tools/u8glib/converter.html - */ - -#define CUSTOM_BOOTSCREEN_BMPWIDTH 128 - -const unsigned char custom_start_bmp[] PROGMEM = { - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000001,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000111,B11111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00011111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00111111,B11111111,B11111000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B11111111,B11111111,B11111110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000011,B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00001111,B11111111,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00011111,B11111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00111111,B11111110,B00111111,B00011111,B11110011,B10000000,B00011100,B00111111,B11110000,B00111111,B11111000,B00000111,B11111110,B00000111,B10000000,B00110000, - B00111111,B11111100,B01111110,B00111111,B11110011,B10000000,B00011100,B01111111,B11111100,B00111111,B11111100,B00001111,B11111111,B10000111,B11000000,B00110000, - B00111111,B11111100,B11111100,B01111111,B11110001,B11000000,B00011100,B11110000,B00011100,B00111000,B00011110,B00011110,B00000011,B10000111,B11100000,B00110000, - B00111111,B11111000,B11111100,B01111111,B11110001,B11000000,B00111000,B11100000,B00001110,B00111000,B00001110,B00011100,B00000001,B11000111,B11100000,B00110000, - B00111111,B11110001,B11111000,B11111111,B11110001,B11000000,B00111000,B11100000,B00001110,B00111000,B00001110,B00011100,B00000001,B11000111,B01110000,B00110000, - B00111111,B11110011,B11111001,B11111111,B11110000,B11100000,B00110000,B11100000,B00001110,B00111000,B00001110,B00011100,B00000001,B11000111,B01111000,B00110000, - B00111111,B11100011,B11110001,B11111111,B11110000,B11100000,B01110000,B11100000,B00001110,B00111000,B00001110,B00011100,B00000001,B11000111,B00111000,B00110000, - B00111111,B11000111,B11100011,B11111111,B11110000,B01110000,B01110000,B11100000,B00001110,B00111000,B00011110,B00011100,B00000001,B11000111,B00011100,B00110000, - B00111111,B11001111,B11100111,B11111111,B11110000,B01110000,B11100000,B11100000,B00001110,B00111111,B11111100,B00011100,B00000001,B11000111,B00011110,B00110000, - B00111111,B11111111,B11000111,B11111111,B11110000,B01110000,B11100000,B11100000,B00001110,B00111111,B11110000,B00011100,B00000001,B11000111,B00001110,B00110000, - B00111111,B11111111,B10001111,B11111111,B11110000,B00111000,B11000000,B11100000,B00001110,B00111000,B11100000,B00011100,B00000001,B11000111,B00001111,B00110000, - B00111111,B11111111,B10011111,B11001111,B11110000,B00111001,B11000000,B11100000,B00001110,B00111000,B11110000,B00011100,B00000001,B11000111,B00000111,B00110000, - B00111111,B11111111,B00011111,B10001111,B11110000,B00111001,B11000000,B11100000,B00001110,B00111000,B01111000,B00011100,B00000001,B11000111,B00000011,B10110000, - B00111111,B11111110,B00111111,B00011111,B11110000,B00011101,B10000000,B11100000,B00001110,B00111000,B00111000,B00011100,B00000001,B11000111,B00000011,B11110000, - B00111111,B11111110,B01111111,B00111111,B11110000,B00011111,B10000000,B11110000,B00011110,B00111000,B00011100,B00011110,B00000011,B10000111,B00000001,B11110000, - B00111111,B11111100,B01111110,B00111111,B11110000,B00001111,B00000000,B01111110,B11111100,B00111000,B00011110,B00001111,B10011111,B10000111,B00000000,B11110000, - B00111111,B11111000,B11111100,B01111111,B11110000,B00001111,B00000000,B00111111,B11111000,B00111000,B00001110,B00000111,B11111111,B00000111,B00000000,B11110000, - B00111111,B11111001,B11111100,B11111111,B11110000,B00000000,B00000000,B00000111,B11000000,B00000000,B00000000,B00000000,B11111000,B00000000,B00000000,B00000000, - B00111111,B11110001,B11111000,B11111111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00011111,B11111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00001111,B11111111,B11111111,B11111111,B11000011,B11110000,B00000001,B11110000,B00000000,B11110000,B00000000,B01100000,B00000001,B11110000,B00000011,B00010000, - B00000011,B11111111,B11111111,B11111111,B10000011,B00111000,B00000001,B10000000,B00000001,B10000000,B00000000,B01100000,B00000011,B00000000,B00000011,B00011000, - B00000000,B11111111,B11111111,B11111110,B00000011,B00011000,B00000001,B00000000,B00000001,B00000000,B00000000,B01100000,B00000010,B00000000,B00000011,B10011000, - B00000000,B01111111,B11111111,B11111000,B00000011,B00011000,B00000001,B11100000,B00000001,B11100000,B00000000,B01100000,B00000010,B01110000,B00000010,B11011000, - B00000000,B00011111,B11111111,B11110000,B00000011,B00011000,B00000001,B11100000,B00000000,B11110000,B00000000,B01100000,B00000010,B01110000,B00000010,B11011000, - B00000000,B00000111,B11111111,B11000000,B00000011,B00011000,B00000001,B00000000,B00000000,B00011000,B00000000,B01100000,B00000010,B00010000,B00000010,B01111000, - B00000000,B00000011,B11111111,B00000000,B00000011,B00011000,B00000001,B00000000,B00000000,B00010000,B00000000,B01100000,B00000010,B00010000,B00000010,B00111000, - B00000000,B00000000,B11111100,B00000000,B00000011,B11110000,B00000001,B11110000,B00000001,B11110000,B00000000,B01100000,B00000011,B11110000,B00000010,B00111000, - B00000000,B00000000,B00111000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000 -}; diff --git a/config/examples/Velleman/K8200/Configuration.h b/config/examples/Velleman/K8200/Configuration.h deleted file mode 100644 index d4d28007fb..0000000000 --- a/config/examples/Velleman/K8200/Configuration.h +++ /dev/null @@ -1,2261 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -/** - * Sample configuration file for Vellemann K8200 - * tested on K8200 with VM8201 (Display) - * and Arduino 1.6.12 (Mac OS X) by @CONSULitAS, 2016-11-18 - * https://github.com/CONSULitAS/Marlin-K8200/archive/K8200_stable_2016-11-18.zip - * - * Please choose your hardware options for the K8200: - */ - -// VM8201 Display unit -#define K8200_VM8201 -// K8204 Z axis upgrade rod and coupler -> TODO -// #define K8200_K8204 -// K8203 direct drive extruder -> TODO -// #define K8200_K8203 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(K8200, @CONSULitAS)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_K8200 -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "K8200" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -#if ENABLED(K8200_VM8201) - #define MACHINE_UUID "2b7dea3b-844e-4ab1-aa96-bb6406607d6e" // K8200 standard config with VM8201 (Display) -#else - #define MACHINE_UUID "92f72de1-c211-452e-9f2b-61ef88a4751e" // K8200 standard config without VM8201 (Display) -#endif - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 5 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 5 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - //#define DEFAULT_Kp 22.2 - //#define DEFAULT_Ki 1.08 - //#define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - - // Vellemann K8200 Extruder - calculated with PID Autotune and tested - #define DEFAULT_Kp 24.29 - #define DEFAULT_Ki 1.58 - #define DEFAULT_Kd 93.51 -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - //#define DEFAULT_bedKp 10.00 - //#define DEFAULT_bedKi .023 - //#define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. - - // Vellemann K8200 PCB heatbed with standard PCU at 60 degreesC - calculated with PID Autotune and tested - // from pidautotune - #define DEFAULT_bedKp 341.88 - #define DEFAULT_bedKi 25.32 - #define DEFAULT_bedKd 1153.89 -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - #define ENDSTOPPULLUP_XMIN - #define ENDSTOPPULLUP_YMIN - #define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 64.25, 64.25, 2560, 600 } -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.04 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR false // K8200: false -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true // K8200: true for geared default extruder! -#define INVERT_E1_DIR true -#define INVERT_E2_DIR true -#define INVERT_E3_DIR true -#define INVERT_E4_DIR true -#define INVERT_E5_DIR true - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -// K8200: it is usual to have clamps for the glass plate on the heatbed -#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 50 // K8200: PLA / set back to 70 if you have an upgraded heatbed power supply -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 60 // K8200: ABS / set back to 110 if you have an upgraded heatbed power supply -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -// K8200: for Display VM8201 with SD slot -#if ENABLED(K8200_VM8201) - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE // K8200: for Display VM8201 // this is the most common hardware - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -#define ENCODER_PULSES_PER_STEP 4 // K8200_VM8201: four steps per encoder step - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -#define ENCODER_STEPS_PER_MENU_ITEM 1 // K8200_VM8201: One step per menu item - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -#define REVERSE_MENU_DIRECTION // K8200: for Display VM8201 encoder on right side - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -#define ULTIMAKERCONTROLLER // K8200: for Display VM8201 - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -#endif // K8200_VM8201 - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Velleman/K8200/Configuration_adv.h b/config/examples/Velleman/K8200/Configuration_adv.h deleted file mode 100644 index f2aa2c54e4..0000000000 --- a/config/examples/Velleman/K8200/Configuration_adv.h +++ /dev/null @@ -1,2944 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ - - /** - * Sample configuration file for Vellemann K8200 - * tested on K8200 with VM8201 (Display) - * and Arduino 1.6.12 (Mac) by @CONSULitAS, 2016-11-18 - * https://github.com/CONSULitAS/Marlin-K8200/archive/K8200_stable_2016-11-18.zip - * - */ - -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - // K8200 has weak heaters/power supply by default, so you have to relax! - #define THERMAL_PROTECTION_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 8 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - // K8200 has weak heaters/power supply by default, so you have to relax! - #define WATCH_TEMP_PERIOD 30 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - // K8200 has weak heaters/power supply by default, so you have to relax! - // the default bed is so weak, that you can hardly go over 75°C - #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 10 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -#define FAN_KICKSTART_TIME 500 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 4, 4, 8 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - #define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 32 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 128 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - //#define USER_DESC_5 "Home & Info" - //#define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Velleman/K8200/README.md b/config/examples/Velleman/K8200/README.md deleted file mode 100644 index 42cc1846ed..0000000000 --- a/config/examples/Velleman/K8200/README.md +++ /dev/null @@ -1,20 +0,0 @@ -# Example Configuration for Vellemann [K8200](http://www.k8200.eu/) -* Configuration files for **Vellemann K8200** (with [VM8201](http://www.vellemanprojects.eu/products/view/?id=416158) - LCD Option for K8200) -* K8200 is a 3Drag clone - configuration should work with 3Drag http://reprap.org/wiki/3drag, too. Please report. - -* updated manually with parameters from genuine Vellemann Firmware "firmware_k8200_marlinv2" based on the recent development branch - -* VM8201 uses "DISPLAY_CHARSET_HD44870 JAPANESE" and "ULTIMAKERCONTROLLER" -* german (de) translation with umlaut is supported now - thanks to @AnHardt for the great hardware based umlaut support - -I [@CONSULitAS](https://github.com/CONSULitAS) tested the changes on my K8200 with 20x4-LCD and Arduino 1.6.12 for Mac (SD library added to IDE manually), 2016-11-18 - everything works well. - -**Source for genuine [Vellemann Firmware](http://www.k8200.eu/support/downloads/)** -* V2.1.1 (for z axis upgrade, date branched: 2013-06-05): [firmware_k8200_v2.1.1.zip](http://www.k8200.eu/downloads/files/downloads/firmware_k8200_v2.1.1.zip) - * see also https://github.com/CONSULitAS/Marlin-K8200/tree/Vellemann_firmware_k8200_v2.1.1.zip - -* V2 (with LCD/SD-Support, date branched: 2013-06-05): [firmware_k8200_marlinv2.zip](http://www.k8200.eu/downloads/files/downloads/firmware_k8200_marlinv2.zip) - * see also https://github.com/CONSULitAS/Marlin-K8200/tree/Vellemann_firmware_k8200_marlinv2.zip - -* V1 (without LCD/SD-Support, date branched: 2012-10-02): [firmware_k8200_marlinv1.zip](http://www.k8200.eu/downloads/files/downloads/firmware_k8200_marlinv1.zip) - * see also https://github.com/CONSULitAS/Marlin-K8200/tree/Vellemann_firmware_k8200_marlinv1.zip diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration.h b/config/examples/Velleman/K8400/Dual-head/Configuration.h deleted file mode 100644 index bcddd93063..0000000000 --- a/config/examples/Velleman/K8400/Dual-head/Configuration.h +++ /dev/null @@ -1,2227 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(Anthony Birkett, default config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_K8400 -#endif - -// Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 2 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 5 -#define TEMP_SENSOR_1 5 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 0 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 2 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_HYSTERESIS 5 // (°C) Temperature proximity considered "close enough" to the target -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - //#define DEFAULT_Kp 22.2 - //#define DEFAULT_Ki 1.08 - //#define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - #define DEFAULT_Kp 63.0 - #define DEFAULT_Ki 2.25 - #define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 134.74, 134.74, 4266.66, 148.7 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 160, 160, 10, 10000 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 6000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 6000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.007 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR true -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 200 -#define Y_BED_SIZE 180 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 190 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (8*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 210 -#define PREHEAT_1_TEMP_BED 0 -#define PREHEAT_1_FAN_SPEED 165 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 245 -#define PREHEAT_2_TEMP_BED 0 -#define PREHEAT_2_FAN_SPEED 165 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED // Enable for the Velleman RGB LED Add-on. https://www.velleman.eu/products/view/?id=430100 -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - // Pin defines for the RGB LED Add-on. - #define RGB_LED_R_PIN 41 - #define RGB_LED_G_PIN 40 - #define RGB_LED_B_PIN 12 - #define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h deleted file mode 100644 index eb408012cf..0000000000 --- a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 1000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 1 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - #define CONTROLLER_FAN_PIN 2 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 10 -#define Y_HOME_BUMP_MM 10 -#define Z_HOME_BUMP_MM 3 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -//#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 26 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 5 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 600 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 100 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - //#define USER_DESC_5 "Home & Info" - //#define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Velleman/K8400/Dual-head/README.md b/config/examples/Velleman/K8400/Dual-head/README.md deleted file mode 100644 index 1ebdd16ef2..0000000000 --- a/config/examples/Velleman/K8400/Dual-head/README.md +++ /dev/null @@ -1,15 +0,0 @@ -# Configuration for Velleman K8400 Vertex -http://www.k8400.eu/ - -Configuration files for the K8400, ported upstream from the official Velleman firmware. -Like its predecessor, (K8200), the K8400 is a 3Drag clone. There are some minor differences, documented in pins_K8400.h. - -Single and dual head configurations provided. Copy the correct Configuration.h and Configuration_adv.h to the /src/config directory. - -**NOTE: This configuration includes the community sourced feed rate fix. Use 100% feed rate in Repetier!** - -For implementation and updated K8400 firmware, see https://github.com/birkett/Velleman-K8400-Firmware - -### Original Sources -Credit to Velleman for the original 1.0.x based code:
-http://www.vertex3dprinter.eu/downloads/files/vertex/firmware/vertex-m1-v1.4-h2.zip diff --git a/config/examples/Velleman/K8400/Single-head/Configuration.h b/config/examples/Velleman/K8400/Single-head/Configuration.h deleted file mode 100644 index 6c86f1706e..0000000000 --- a/config/examples/Velleman/K8400/Single-head/Configuration.h +++ /dev/null @@ -1,2227 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(Anthony Birkett, default config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_K8400 -#endif - -// Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 5 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 0 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 2 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 5 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - //#define DEFAULT_Kp 22.2 - //#define DEFAULT_Ki 1.08 - //#define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - #define DEFAULT_Kp 63.0 - #define DEFAULT_Ki 2.25 - #define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 134.74, 134.74, 4266.66, 148.7 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 160, 160, 10, 10000 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 6000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 6000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.5 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 20.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.007 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR true -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 200 -#define Y_BED_SIZE 180 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 190 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (8*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 210 -#define PREHEAT_1_TEMP_BED 0 -#define PREHEAT_1_FAN_SPEED 165 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 245 -#define PREHEAT_2_TEMP_BED 0 -#define PREHEAT_2_FAN_SPEED 165 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED // Enable for the Velleman RGB LED Add-on. https://www.velleman.eu/products/view/?id=430100 -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - // Pin defines for the RGB LED Add-on. - #define RGB_LED_R_PIN 41 - #define RGB_LED_G_PIN 40 - #define RGB_LED_B_PIN 12 - #define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h deleted file mode 100644 index eb408012cf..0000000000 --- a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 1000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 1 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - #define CONTROLLER_FAN_PIN 2 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 10 -#define Y_HOME_BUMP_MM 10 -#define Z_HOME_BUMP_MM 3 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -//#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 26 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 5 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 600 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 100 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - //#define USER_DESC_5 "Home & Info" - //#define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Velleman/K8400/Single-head/README.md b/config/examples/Velleman/K8400/Single-head/README.md deleted file mode 100644 index 1ebdd16ef2..0000000000 --- a/config/examples/Velleman/K8400/Single-head/README.md +++ /dev/null @@ -1,15 +0,0 @@ -# Configuration for Velleman K8400 Vertex -http://www.k8400.eu/ - -Configuration files for the K8400, ported upstream from the official Velleman firmware. -Like its predecessor, (K8200), the K8400 is a 3Drag clone. There are some minor differences, documented in pins_K8400.h. - -Single and dual head configurations provided. Copy the correct Configuration.h and Configuration_adv.h to the /src/config directory. - -**NOTE: This configuration includes the community sourced feed rate fix. Use 100% feed rate in Repetier!** - -For implementation and updated K8400 firmware, see https://github.com/birkett/Velleman-K8400-Firmware - -### Original Sources -Credit to Velleman for the original 1.0.x based code:
-http://www.vertex3dprinter.eu/downloads/files/vertex/firmware/vertex-m1-v1.4-h2.zip diff --git a/config/examples/WASP/PowerWASP/Configuration.h b/config/examples/WASP/PowerWASP/Configuration.h deleted file mode 100644 index b8dd81e9e4..0000000000 --- a/config/examples/WASP/PowerWASP/Configuration.h +++ /dev/null @@ -1,2245 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(Julian + Jason)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT_2 3 -/** Internal onboard port for WASP - - * (Top view) - - * .------------.---------------------. - - * | | Arduino Serial3 | - - * | Stepper | [O] 5V | Front - - * | drivers | [O] GND | panel - - * | & fan | [O] TX | side - - * | | [O] RX | - - * `------------´---------------------´ - - */ - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_ULTIMAKER -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "PowerWASP" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 -1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 0 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 5 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 230 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // POWERwasp - #define DEFAULT_Kp 27.56 - #define DEFAULT_Ki 5.34 - #define DEFAULT_Kd 35.56 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -//#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 500 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -#define USE_XMAX_PLUG -#define USE_YMAX_PLUG -#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - #define ENDSTOPPULLUP_XMAX - #define ENDSTOPPULLUP_YMAX - #define ENDSTOPPULLUP_ZMAX - #define ENDSTOPPULLUP_XMIN - #define ENDSTOPPULLUP_YMIN - #define ENDSTOPPULLUP_ZMIN - #define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 85.48,85.48,533.33,104.7 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 150, 150, 15, 20 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 10000, 10000, 50, 500 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 4000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 15.0 - #define DEFAULT_YJERK 15.0 - #define DEFAULT_ZJERK 0.5 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 1.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.023 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -#define PROBE_MANUALLY -#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 1000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR false -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR 1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 261 -#define Y_BED_SIZE 193 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 191.9 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -//#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -//#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (8*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 190 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 190 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 10 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 WESTERN - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 20 -#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/WASP/PowerWASP/Configuration_adv.h b/config/examples/WASP/PowerWASP/Configuration_adv.h deleted file mode 100644 index 05c06d90b0..0000000000 --- a/config/examples/WASP/PowerWASP/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 180 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - //#define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "G1 Y190 Z190\nM84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G27" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - #define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - #define POWER_LOSS_PIN 65 // Pin to detect power loss - #define POWER_LOSS_STATE LOW // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 10 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 10 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 20 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 400 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 20 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 400 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 5 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/WASP/PowerWASP/README.md b/config/examples/WASP/PowerWASP/README.md deleted file mode 100644 index 9ae7646d36..0000000000 --- a/config/examples/WASP/PowerWASP/README.md +++ /dev/null @@ -1,72 +0,0 @@ -# Modifications to PowerWASP firmware with a few extras -The later versions of the PowerWASP controller board have power loss detection on pin 65 (low on loss). this has been configured in POWER_LOSS_RECOVERY. Because of this there is no need to save each command line just in case of a power loss to the machine. The board will hold enough power to allow the print to be saved to the SD card. - -The retract position on finishing the print has been set at Z190 X0 Y0 - -There are provisions made here to use ESP3D wireless printer control. - -https://github.com/luc-github/ESP3D - -The original PowerWASP board has available a internal serial port connection with Arduino Serial3. -The connections are as follows: -``` -.------------.---------------------. -| | Serial3 | -| | [O] 5V | Front -| FAN | [O] GND | panel -| | [O] TX | side -| | [O] RX | -`------------´---------------------´ -``` - -With the option of wireless file upload to the SD card, the idea of updating the Firmware -from the SD can also be useful. This option has been selected, but requires a modified boot loader -that can be found here: - -https://github.com/rainerumrobotics/MicroBridge-Arduino-ATMega2560 - -USB and SDCARD Firmware flashing for the ARDUINO ATMEGA 2560 and ADK ---------------------------------------------------------------------- -The bootloader looks for byte in eeprom at address 0x3FF: - - -if it is set to 0xF0 bootloader will look for a bin file on the sdcard named - firmware.bin and use it to flash the firmware then reset the byte to 0xFF so it - does this only once - - -otherwise no action is taken and bootloader works as a arduino bootloader except - some of the debugging functions are missing - -Setup - - ADAFruit micro sdcard 5V ready: - - SDCARD on ATMEGA 2560 or ADK - - pin 50 - DO - - pin 51 - DI - - pin 52 - CLK - - pin 53 - CS - -Generate BIN file for firmware update: - -To generate a bin file you need issue the following command on you apps elf executable: - - avr-objcopy -I elf32-avr -O binary firmware.cpp.elf firmware.bin - -this generates firmware.bin which can be put on the sd for flashing your firmware. You can find the elf -file in you apps build directory. - -Using olimex usb to upload bootloader: - - avrdude -c stk500v2 -p m2560 -P /dev/tty.usbmodemfd131 -B 500 -e -u -U lock:w:0x3F:m -U efuse:w:0xFD:m -U hfuse:w:0xD8:m -U efuse:w:0xFF:m -F - - avrdude -p m2560 -c stk500v2 -P /dev/tty.usbmodemfa131 -F -U flash:w:stk500boot.hex -b 115200 -B1 -U lock:w:0x0F:m - - avrdude -p m168 -c usbtiny -e -u -U lock:w:0x3f:m -U efuse:w:0x00:m -U hfuse:w:0xDD:m -U lfuse:w:0xFF:m - - - avrdude -p m2560 -c stk500v2 -P /dev/tty.usbmodemfd131 -U flash:w:stk500boot_v2_mega2560.hex -U lock:w:0x0F:m -v - avrdude -c stk500v2 -p m2560 -P /dev/tty.usbmodemfd131 -U lock:w:0x3F:m -U efuse:w:0xFD:m -U hfuse:w:0xD8:m -U lfuse:w:0xFF:m -e -v diff --git a/config/examples/Wanhao/Duplicator 6/Configuration.h b/config/examples/Wanhao/Duplicator 6/Configuration.h deleted file mode 100644 index 98da8c696d..0000000000 --- a/config/examples/Wanhao/Duplicator 6/Configuration.h +++ /dev/null @@ -1,2237 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(Rob Mendon, default config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_ULTIMAIN_2 -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Duplicator 6" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 20 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 260 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 120 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - //#define DEFAULT_Kp 22.2 - //#define DEFAULT_Ki 1.08 - //#define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - - // Duplicator 6 - #define DEFAULT_Kp 9.12 - #define DEFAULT_Ki 0.41 - #define DEFAULT_Kd 50.98 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) -// #define DEFAULT_bedKp 10.00 -// #define DEFAULT_bedKi .023 -// #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // Duplicator 6 - #define DEFAULT_bedKp 124.55 - #define DEFAULT_bedKi 23.46 - #define DEFAULT_bedKd 165.29 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80.0395, 80.0395, 400.48, 99.1 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 500 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 1500 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 1500 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 1.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.027 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR false -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 170 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -#define ENCODER_PULSES_PER_STEP 2 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 5 -#define LCD_FEEDBACK_FREQUENCY_HZ 1000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -#define OLED_PANEL_TINYBOY2 -#define LCD_RESET_PIN 5 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h deleted file mode 100644 index 5d25dcefbb..0000000000 --- a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h +++ /dev/null @@ -1,2933 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 40 // Seconds Changed to 90 seconds to help prevent false thermal runaway errors (may have to increase to 120) - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds Changed to 90 seconds to help prevent false heater failed errors - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - #define CASE_LIGHT_PIN 8 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 255 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - #define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//Motor current PWM conversion, PWM value = MotorCurrentSetting * 255 / range -#define MOTOR_CURRENT_PWM_RANGE 2782 -#define PWM_MOTOR_CURRENT { 1200, 1200, 1000 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 70*60, 70*60, 15*60, 6*60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - #define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -#define LCD_TIMEOUT_TO_STATUS 60000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G27" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - //#define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - //#define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - #define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.00 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Chippy_Bootscreen.h b/config/examples/Wanhao/Duplicator i3 2.1/Chippy_Bootscreen.h deleted file mode 100644 index 1407c6f173..0000000000 --- a/config/examples/Wanhao/Duplicator i3 2.1/Chippy_Bootscreen.h +++ /dev/null @@ -1,74 +0,0 @@ -/** - * Made with Marlin Bitmap Converter - * http://marlinfw.org/tools/u8glib/converter.html - * - * This bitmap from 128x64 pasted image - */ -#define CUSTOM_BOOTSCREEN_BMPWIDTH 128 - -const unsigned char custom_start_bmp[] PROGMEM = { - B00100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000100, - B01000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000010, - B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001, - B00000000,B00000000,B00000000,B00000011,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000011,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000111,B11000000,B00000000,B00000000,B00000000,B00001111,B00000000,B00000001,B00000000,B00000000,B00001111,B00000000,B00000000, - B00000000,B00000001,B11111111,B11111111,B11111110,B00000000,B00000000,B00000000,B00001000,B10000000,B10000001,B00000000,B00000000,B00001000,B10000000,B00000000, - B00000000,B00000011,B11111111,B11111111,B11111111,B11111111,B11000000,B00000000,B00001000,B10111101,B11000001,B00111100,B00011110,B00001000,B10111101,B00100000, - B00000000,B00000011,B00000000,B00000000,B00000011,B11111100,B01000000,B00000000,B00001111,B00100100,B10000001,B00100100,B00000010,B00001111,B00100101,B00100000, - B00000000,B00000011,B00000000,B00000000,B00000000,B00000100,B01111000,B00000000,B00001000,B10100100,B10011101,B00100101,B11011110,B11101000,B10100100,B11000000, - B00000000,B00000011,B00000000,B00000000,B00000000,B00000100,B00001000,B00000000,B00001000,B10100100,B10000001,B00100100,B00010010,B00001000,B10100101,B00100000, - B00000000,B00000011,B00111111,B11111111,B00000000,B00000100,B00001000,B00000000,B00001111,B00111100,B11000001,B00100100,B00011110,B00001111,B00111101,B00100000, - B00000000,B00000011,B00111111,B11111111,B11111111,B10000100,B00001000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000011,B00110000,B00000111,B11111111,B11000100,B00001000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000011,B00110000,B00000000,B00000000,B11000100,B00001000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000011,B00110011,B11000000,B00000000,B11000100,B00001000,B10000000,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000011,B00110011,B11000000,B00000000,B11000100,B00001001,B10000000,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000011,B00110011,B11000000,B00000000,B11000100,B00001011,B10000000,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000011,B00110011,B11000001,B11111100,B11000100,B00001011,B10000000,B11100011,B11000010,B00000000,B00000000,B00000010,B00000000,B00000000,B00100000, - B00000000,B00000011,B00110011,B11000001,B11111100,B11000100,B00001011,B11100011,B11100010,B00000010,B00000000,B00000000,B00100000,B00000000,B00000000,B00100000, - B00000000,B00000011,B00110011,B11000001,B11111100,B11000100,B00001011,B11100011,B11100010,B00001110,B01001000,B11101111,B01110100,B11110011,B11001111,B00100000, - B00000000,B00000011,B00110011,B11000000,B00000000,B11000100,B00001001,B11111111,B11000011,B11010010,B01001001,B00000001,B00100100,B10010010,B01000001,B00100000, - B00000000,B00000011,B00110000,B00000000,B00000000,B11000100,B00001000,B11111111,B10000010,B00010010,B01001001,B00001111,B00100100,B10010010,B01001111,B00100000, - B00000111,B11111111,B00110000,B00000000,B00000000,B11000100,B00001000,B01111111,B00000010,B00010010,B01001001,B00001001,B00100100,B10010010,B01001001,B00100000, - B00001111,B11111111,B00110000,B00000000,B00000000,B11000100,B00001000,B00111100,B00000011,B11001110,B01111000,B11101111,B00110100,B11110010,B01001111,B00100000, - B00001111,B11111111,B00110000,B00000000,B00000000,B11000100,B00001000,B00111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00001111,B10000111,B00110001,B11000000,B00011100,B11000100,B01111111,B11111110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000111,B00000111,B00110001,B11100000,B00111100,B11000100,B01111111,B11111110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00011111,B10000011,B00110000,B11111111,B11111000,B11000100,B01111111,B11111110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00111111,B11000011,B00110000,B00111111,B11100000,B11001100,B01111111,B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B01111111,B11100011,B00111111,B11000000,B00000000,B11001100,B01111111,B11111000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B11111000,B11110011,B00011111,B11111111,B00000000,B11001100,B00001000,B00000000,B00000000,B00000111,B00000000,B01000000,B00000000,B01000000,B00000000,B00000000, - B11111000,B01110011,B00000000,B11111111,B11111111,B11001100,B00001000,B00000000,B00000000,B00000100,B10000000,B01000000,B00000100,B00000000,B00000000,B00000000, - B11110000,B01110011,B00000000,B00000001,B11111111,B10001100,B00001000,B00000000,B00000000,B00000100,B10011110,B01110001,B11101110,B10001101,B11000000,B00000000, - B01110000,B01100011,B00000000,B00000000,B00000000,B00001100,B00001000,B00000000,B00000000,B00000111,B00010010,B01001001,B00100100,B10010001,B00000000,B00000000, - B00100000,B01000011,B00000000,B00000000,B00000000,B00001100,B00001000,B00000000,B00000000,B00000100,B10010010,B01001001,B00100100,B10010000,B11000000,B00000000, - B00000000,B00000011,B00011111,B00000000,B00000000,B00001100,B00001000,B00000000,B00000000,B00000100,B10010010,B01001001,B00100100,B10010000,B01000000,B00000000, - B00000000,B00000011,B00010001,B00000000,B00000000,B00001100,B00001000,B00000000,B00000000,B00000100,B10011110,B01110001,B11100110,B10001101,B11000000,B00000000, - B00000000,B00000011,B00010001,B00000000,B00000000,B00001100,B00001000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000011,B00010001,B00000111,B00000000,B00001100,B00001000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000011,B00011111,B00000111,B11111000,B00001100,B00001000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000011,B00000000,B00000000,B01111111,B00001100,B00001000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000011,B00000000,B00000000,B00000111,B00001100,B00001000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000011,B00000000,B00000000,B00000000,B00001100,B00001000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000011,B11110000,B00000000,B00000000,B00001100,B00001000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000001,B11111111,B10000000,B00000000,B00001100,B00010000,B00100000,B00000000,B00100000,B00000000,B10000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000001,B11111111,B11111000,B00000000,B00001100,B01100000,B00100000,B00000010,B00000000,B00000000,B10000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000001,B11111111,B11111111,B11000000,B00001100,B11100000,B00111000,B11110111,B01001111,B00111100,B11100011,B11010010,B00000111,B01111000,B00000000, - B00000000,B00000001,B11111111,B11111111,B11111110,B00001101,B11100000,B00100100,B10010010,B01001001,B00000100,B10010010,B01010010,B00001000,B00001000,B00000000, - B00000000,B00000001,B11111111,B11111111,B11111111,B11111111,B11100000,B00100100,B10010010,B01001001,B00111100,B10010010,B01001100,B00001000,B01111000,B00000000, - B00000000,B00000000,B11111111,B11111111,B11111111,B11111111,B11100000,B00100100,B10010010,B01001001,B00100100,B10010010,B01010010,B00001000,B01001000,B00000000, - B00000000,B00000000,B00001111,B11111111,B11111111,B11111111,B11100000,B00111000,B11110011,B01001001,B00111100,B11100011,B11010010,B01000111,B01111000,B00000000, - B00000000,B00000000,B00000000,B11111111,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00001111,B11111111,B11111111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B11111111,B11111111,B00000001,B10110110,B11011011,B01101101,B10110110,B11011011,B01101101,B10110110,B11011011,B00000000, - B00000000,B00000000,B00000000,B00000000,B00001111,B11111110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001, - B01000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000010, - B00100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000100 -}; diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h deleted file mode 100644 index f8e2b9e5e8..0000000000 --- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h +++ /dev/null @@ -1,2237 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(Matthew Piercey, Bot-In-a-Box Educational Robotics)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN -#define STRING_SPLASH_LINE2 "https://botinabox.ca" - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_MELZI -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Wanhao i3" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 99 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 99 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 260 -#define HEATER_1_MAXTEMP 260 -#define HEATER_2_MAXTEMP 260 -#define HEATER_3_MAXTEMP 260 -#define HEATER_4_MAXTEMP 260 -#define HEATER_5_MAXTEMP 260 -#define BED_MAXTEMP 100 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - //#define DEFAULT_Kp 22.2 - //#define DEFAULT_Ki 1.08 - //#define DEFAULT_Kd 114 - - // Wanhao Duplicator i3 - #define DEFAULT_Kp 29 - #define DEFAULT_Ki 2.00 - #define DEFAULT_Kd 97 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - //#define DEFAULT_bedKp 10.00 - //#define DEFAULT_bedKi .023 - //#define DEFAULT_bedKd 305.4 - - // Wanhao Duplicator i3 - #define DEFAULT_bedKp 249.52 - #define DEFAULT_bedKi 47.89 - #define DEFAULT_bedKd 325.03 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 100 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 700, 700, 100, 10000 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 700 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 700 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 8.0 - #define DEFAULT_YJERK 8.0 - #define DEFAULT_ZJERK 0.4 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR false -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 150 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 205 -#define PREHEAT_1_TEMP_BED 60 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 100 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h deleted file mode 100644 index a5a044b218..0000000000 --- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - #define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -//#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 32 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 32 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Wanhao/Duplicator i3 2.1/README.md b/config/examples/Wanhao/Duplicator i3 2.1/README.md deleted file mode 100644 index d2a7ea6401..0000000000 --- a/config/examples/Wanhao/Duplicator i3 2.1/README.md +++ /dev/null @@ -1,21 +0,0 @@ -Configuration for the Wanhao Duplicator i3 v2.1 - -[Made by Bot-In-a-Box Educational Robotics](https://botinabox.ca) -[See original configuration repo](https://github.com/BotInABoxER/marlin2-for-wanhao-i3) - -Notes: -- YMMV, but the included thermistor table has been tested to work with a 100k bed thermistor with a 10K pull-up resistor -- The smaller Marlin logo is used to save memory -- You may have a 4.7K pull-up resistor, in which case the included thermistor table will be off -- The included thermistor table was generated with `buildroot/share/scripts/createTemperatureLookupMarlin.py --rp=10000` -- Includes an optional custom Wanhao logo bootscreen designed to fit the stock LCD -- Includes an optional custom Chippy from Bot-In-a-Box bootscreen designed to fit the stock LCD - -Inspirations: -- https://www.thingiverse.com/thing:3378807 (Custom firmware 1.x by Nitrogen777) -- https://www.thingiverse.com/thing:3378807 (Custom firmware 2.x by Remotheman) - -Instructions: -- Copy the `Configuration.h`, `_Bootscreen.h` (or `Chippy_Bootscreen.h`; rename it `_Bootscreen.h`), and `Configuration_adv.h` to the `Marlin/ directory` -- Copy the `thermistor_99.h` and `thermistors.h` files to the `Marlin/src/modules/thermistors` directory -- Flash the firmware onto your Melzi (https://www.fission3d.com/guides/flash-bootloader-and-install-firmware-with-raspberry-pi might help) diff --git a/config/examples/Wanhao/Duplicator i3 2.1/_Bootscreen.h b/config/examples/Wanhao/Duplicator i3 2.1/_Bootscreen.h deleted file mode 100644 index 34686deeaa..0000000000 --- a/config/examples/Wanhao/Duplicator i3 2.1/_Bootscreen.h +++ /dev/null @@ -1,72 +0,0 @@ -/** - * Made with Marlin Bitmap Converter - * http://marlinfw.org/tools/u8glib/converter.html - * - * This bitmap from 128x64 pasted image - */ -#define CUSTOM_BOOTSCREEN_BMPWIDTH 104 - -const unsigned char custom_start_bmp[] PROGMEM = { - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00010000,B00000000,B00000011,B11111111,B10111000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B10111111,B10000000,B01111111,B11111111,B00111111,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B10111111,B11111111,B11111111,B11111111,B01111111,B11100000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B01111111,B10111111,B11111111,B11111111,B11111110,B01111111,B11110000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000001,B11111111,B00111111,B11111111,B11111111,B11111100,B11111111,B11111000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000111,B11111111,B01111111,B11111111,B11111111,B11111101,B11111111,B11111110,B00111100,B00000000, - B00000000,B00000000,B00000000,B00000000,B00011111,B11111111,B01111111,B11111111,B11111111,B11111101,B11111111,B11111111,B11111111,B11000000, - B00000000,B00000000,B00000000,B00000000,B01111111,B11111110,B01111111,B11111111,B11111111,B11111101,B11111111,B11111111,B10000001,B11100000, - B00000000,B00000000,B00000000,B00000001,B11111111,B11111110,B11111111,B11111111,B11111111,B11111101,B11111111,B11111110,B00000000,B11111000, - B00000000,B00000000,B00000000,B00000011,B11111111,B11111110,B11111111,B11111111,B11111111,B11111101,B11111111,B11111110,B00000000,B00000000, - B00000000,B00000000,B00000000,B00001111,B11111111,B11111110,B11111111,B11111111,B11111111,B11111101,B11111111,B11111110,B00000000,B00000000, - B00000000,B00000000,B00000000,B01101111,B11111111,B11111110,B11111111,B11111111,B11111111,B11111101,B11111111,B11111111,B00000000,B00000000, - B00000000,B00000000,B00000001,B11101111,B11111111,B11111110,B11111111,B11111111,B11111111,B11111101,B11111111,B11111111,B00000000,B00000000, - B00000000,B00000000,B01100111,B11001111,B11111111,B11111110,B01111111,B11111111,B11111111,B11111101,B11111111,B11111111,B00000000,B00000000, - B00000000,B00000111,B01111111,B11011111,B11111111,B11111111,B01111111,B11111111,B11111111,B11111100,B11111111,B11111111,B00000000,B00000000, - B00000000,B00000111,B11111111,B11011111,B11111111,B11111111,B01111111,B11111111,B11111111,B11111110,B11111111,B11111111,B00000000,B00000000, - B00000000,B00000011,B11111111,B11011111,B11111111,B11111111,B00111111,B11111111,B11111111,B11111110,B11111111,B11111111,B10000000,B00000000, - B00000000,B00000011,B11111111,B11001111,B11111111,B11111111,B10111111,B11111111,B11111111,B11111110,B01111111,B11111111,B10000000,B00000000, - B00000000,B00000001,B11111111,B11101111,B11111111,B11111111,B10111111,B11111111,B11111111,B11111111,B01111111,B11111111,B11000000,B00000000, - B00000000,B00000001,B11111111,B11101111,B11111111,B11111111,B10011111,B11111111,B11111111,B11111111,B01111111,B11111111,B11000000,B00000000, - B00000000,B00000001,B11111111,B11101111,B11111111,B11111111,B11011111,B11111111,B11111111,B11111111,B01111111,B11111111,B11000000,B00000000, - B00000000,B00000001,B11111111,B11100111,B11111111,B11111111,B11011111,B11111111,B11111111,B11111111,B00111111,B11111111,B11000000,B00000000, - B00000000,B00000001,B11111111,B11110111,B11111111,B11111111,B11011111,B11111111,B11111111,B11111111,B10111111,B11111111,B11000000,B00000000, - B00000000,B01000001,B11111111,B11110011,B11111111,B11111111,B11001111,B11111111,B11111111,B11111111,B10111111,B11111111,B10000000,B00000000, - B00000000,B01100001,B11111111,B11111001,B11111111,B11111111,B11101111,B11111111,B11111111,B11111111,B10111111,B11111111,B10100000,B00000000, - B00000000,B01111001,B11111111,B11111101,B11111111,B11111111,B11101111,B11111111,B11111111,B11111111,B00111111,B11111111,B00110000,B00000000, - B00001000,B01111111,B11111111,B11111100,B11111111,B11111111,B11101111,B11111111,B11111111,B11111111,B01111111,B11111110,B01110000,B00000000, - B00001100,B00111111,B11111111,B11111110,B01111111,B11111111,B11101111,B11111111,B11111111,B11111100,B00111111,B11111100,B11111000,B00000000, - B00001111,B00111111,B11111111,B11111111,B00000000,B00111111,B11101111,B11111111,B11111111,B11110001,B10001111,B11111001,B11111100,B00000000, - B00000111,B11111111,B11111111,B11111111,B00111111,B10001111,B11100111,B11111111,B11111111,B11000011,B11100011,B11111011,B11111110,B00000000, - B00000111,B11111111,B11111111,B11111110,B00111111,B11100011,B11000000,B11111111,B11111110,B00000001,B11111000,B11110011,B11111111,B00000000, - B00000011,B11111111,B11111111,B11111000,B00011111,B11111000,B00000000,B00001111,B11110000,B00000001,B11111110,B00000111,B11111111,B00000000, - B00000011,B11111111,B11111111,B11100000,B00001111,B11111101,B11000000,B00000000,B00000000,B00000001,B11111111,B11101111,B11111111,B00000000, - B00000001,B11111111,B11111111,B11000000,B00001111,B11111101,B11111100,B00000000,B00000000,B00000111,B11111111,B11100111,B11111110,B00000000, - B00000000,B11111111,B11111111,B10000000,B00000111,B11111101,B11111110,B00000000,B00000000,B00001111,B11111111,B11100011,B11111100,B00000000, - B00000000,B01111111,B11111111,B00000000,B00000011,B11111101,B11111111,B00000000,B00000000,B00011111,B11111111,B10000011,B11111100,B00000000, - B00000000,B00111111,B11111110,B00000000,B00000011,B11111001,B11111111,B00000000,B00000000,B00011111,B11111110,B00000111,B11111000,B00000000, - B00000000,B00011111,B11111100,B00000000,B00000011,B11111011,B11111111,B10000000,B00000000,B00111111,B11111100,B00000111,B11111000,B00000000, - B00000000,B00011111,B11110000,B00000000,B00000011,B11110001,B11111111,B11000000,B00000000,B01111111,B11100000,B00001111,B11111000,B00000000, - B00000000,B00001111,B11110000,B00000000,B00000111,B11110000,B00001111,B11000000,B00000000,B11111111,B10000000,B00011111,B11110000,B00000000, - B00000000,B00000011,B11000000,B00000000,B00001111,B11110000,B00000001,B11000000,B00000000,B11111111,B10000000,B00011111,B11100000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000111,B10000111,B10000111,B10000001,B11110000,B00011110,B00000111,B10001111,B00000011,B11000000,B01111100,B00000000,B11111111,B00000000, - B00000111,B10000111,B10000111,B10000001,B11110000,B00011111,B00000111,B10001111,B00000011,B11000000,B01111100,B00000001,B11111111,B10000000, - B00000111,B10000111,B10000111,B10000011,B11111000,B00011111,B00000111,B10001111,B00000011,B11000000,B11111110,B00000011,B11111111,B11000000, - B00000111,B10000111,B10000111,B10000011,B11111000,B00011111,B10000111,B10001111,B00000011,B11000000,B11111110,B00000111,B11111111,B11100000, - B00000111,B10000111,B10000111,B10000111,B10111100,B00011111,B11000111,B10001111,B00000011,B11000001,B11101111,B00000111,B11000011,B11100000, - B00000111,B10000111,B10000111,B10000111,B00011100,B00011111,B11100111,B10001111,B00000011,B11000001,B11000111,B00001111,B10000001,B11110000, - B00000111,B10000111,B10000111,B10000111,B00011100,B00011111,B11110111,B10001111,B11111111,B11000001,B11000111,B00001111,B00000000,B11110000, - B00000111,B11001111,B11001111,B10001111,B00011110,B00011111,B11111111,B10001111,B11111111,B11000011,B11000111,B10001111,B00000000,B11110000, - B00000011,B11001111,B11001111,B00001110,B00001110,B00011111,B11111111,B10001111,B11111111,B11000011,B10000011,B10001111,B00000000,B11110000, - B00000011,B11101111,B11011111,B00001111,B11111110,B00011110,B11111111,B10001111,B00000011,B11000011,B11111111,B10001111,B00000000,B11110000, - B00000001,B11111111,B11111110,B00011111,B11111111,B00011110,B01111111,B10001111,B00000011,B11000111,B11111111,B11001111,B10000001,B11110000, - B00000001,B11111100,B11111110,B00011111,B11111111,B00011110,B00111111,B10001111,B00000011,B11000111,B11111111,B11000111,B11000011,B11100000, - B00000000,B11111100,B11111100,B00011111,B11111111,B00011110,B00011111,B10001111,B00000011,B11000111,B11111111,B11000111,B11111111,B11100000, - B00000000,B01111100,B11111000,B00111110,B00001111,B10011110,B00001111,B10001111,B00000011,B11001111,B10000011,B11100011,B11111111,B11000000, - B00000000,B01111000,B01111000,B00111100,B00000111,B10011110,B00001111,B10001111,B00000011,B11001111,B00000001,B11100001,B11111111,B10000000, - B00000000,B00111000,B01110000,B00111100,B00000111,B10011110,B00000111,B10001111,B00000011,B11001111,B00000001,B11100000,B01111110,B00000000 -}; diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h deleted file mode 100755 index 923fb0183a..0000000000 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration.h +++ /dev/null @@ -1,2226 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(thisiskeithb, Wanhao i3 Mini)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_WANHAO_ONEPLUS -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "i3 Mini" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 13 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 0 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Wanhao Duplicator i3 Mini & rebrands - #define DEFAULT_Kp 22.2 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -//#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 94 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 400, 400, 15, 50 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 3000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 800 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 800 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.05 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR false -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR 1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 125 -#define Y_BED_SIZE 140 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 100 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - #define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - #define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "PETG" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 80 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 WESTERN - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h deleted file mode 100644 index a0eed6fa79..0000000000 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - #define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - #define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 2500 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - #define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/Wanhao/Duplicator i3 Mini/_Bootscreen.h b/config/examples/Wanhao/Duplicator i3 Mini/_Bootscreen.h deleted file mode 100755 index b647f46339..0000000000 --- a/config/examples/Wanhao/Duplicator i3 Mini/_Bootscreen.h +++ /dev/null @@ -1,53 +0,0 @@ -/** - * Made with Marlin Bitmap Converter - * http://marlinfw.org/tools/u8glib/converter.html - */ -#define CUSTOM_BOOTSCREEN_BMPWIDTH 80 -#define CUSTOM_BOOTSCREEN_Y 3 - -const unsigned char custom_start_bmp[] PROGMEM = { - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00110111,B00000000,B01111111,B10111100,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B11111111,B11111111,B11111111,B10111111,B10000000,B00000000, - B00000000,B00000000,B00000000,B00000111,B11111111,B11111111,B11111111,B01111111,B11000000,B00000000, - B00000000,B00000000,B00000000,B00011111,B11101111,B11111111,B11111111,B01111111,B11111111,B00000000, - B00000000,B00000000,B00000000,B00111111,B11101111,B11111111,B11111111,B11111111,B11111111,B11100000, - B00000000,B00000000,B00000000,B11111111,B11101111,B11111111,B11111111,B11111111,B11100000,B00110000, - B00000000,B00000000,B00000011,B11111111,B11111111,B11111111,B11111111,B11111111,B11110000,B00000000, - B00000000,B00000000,B00000111,B11111111,B11111111,B11111111,B11111111,B11111111,B11110000,B00000000, - B00000000,B00000000,B00110111,B11111111,B11111111,B11111111,B11111111,B01111111,B11110000,B00000000, - B00000000,B00010111,B11110111,B11111111,B11101111,B11111111,B11111111,B01111111,B11110000,B00000000, - B00000000,B00011111,B11110111,B11111111,B11101111,B11111111,B11111111,B01111111,B11110000,B00000000, - B00000000,B00001111,B11110111,B11111111,B11111111,B11111111,B11111111,B10111111,B11111000,B00000000, - B00000000,B00001111,B11110111,B11111111,B11110111,B11111111,B11111111,B10111111,B11111000,B00000000, - B00000000,B00001111,B11111111,B11111111,B11110111,B11111111,B11111111,B10111111,B11111100,B00000000, - B00000000,B00001111,B11111011,B11111111,B11110111,B11111111,B11111111,B10111111,B11111100,B00000000, - B00000000,B00001111,B11111011,B11111111,B11111111,B11111111,B11111111,B11111111,B11111100,B00000000, - B00000000,B10001111,B11111101,B11111111,B11111011,B11111111,B11111111,B11011111,B11111000,B00000000, - B00000000,B11111111,B11111100,B11111111,B11111011,B11111111,B11111111,B10111111,B11110110,B00000000, - B00000100,B01111111,B11111110,B11111111,B11111011,B11111111,B11111111,B00011111,B11101111,B00000000, - B00000110,B01111111,B11111111,B00100101,B11111011,B11111111,B11111100,B11101111,B11011111,B10000000, - B00000111,B11111111,B11111111,B00111110,B01110000,B11111111,B11110000,B11110011,B11011111,B11000000, - B00000011,B11111111,B11111100,B00111111,B10000000,B00001111,B10000000,B01111101,B10111111,B11000000, - B00000001,B11111111,B11111000,B00011111,B11011000,B00000000,B00000000,B11111111,B10111111,B10000000, - B00000001,B11111111,B11100000,B00001111,B11011111,B00000000,B00000001,B11111111,B00011111,B10000000, - B00000000,B01111111,B11000000,B00001111,B11111111,B10000000,B00000011,B11111110,B00011111,B00000000, - B00000000,B00111111,B10000000,B00001111,B10111111,B10000000,B00000011,B11111000,B00111111,B00000000, - B00000000,B00111111,B00000000,B00001111,B10011111,B11000000,B00000111,B11000000,B00111110,B00000000, - B00000000,B00011100,B00000000,B00011111,B00000000,B11000000,B00001111,B11000000,B01111110,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000011,B10001100,B01110000,B11100000,B11100000,B11001100,B00011100,B00011000,B00000111,B11000000, - B00000011,B10011100,B01110000,B11110000,B11110001,B11001110,B00011100,B00111100,B00001111,B11100000, - B00000011,B10011100,B01110001,B11110000,B11110001,B11001110,B00011100,B00111100,B00011111,B11110000, - B00000011,B10011100,B01110001,B11110000,B11111001,B11001110,B00011100,B01111110,B00111100,B01111000, - B00000011,B10011100,B01110001,B11111000,B11111101,B11001111,B11111100,B01111110,B00111000,B00111000, - B00000001,B10011110,B11100011,B10111000,B11111111,B11001111,B11111100,B01100111,B00111000,B00011000, - B00000001,B11011110,B11100011,B10111000,B11101111,B11001111,B11111100,B11100111,B00111000,B00111000, - B00000001,B11111111,B11000011,B11111100,B11100111,B11001110,B00011100,B11111111,B00111100,B00111000, - B00000000,B11110111,B11000111,B11111100,B11100011,B11001110,B00011100,B11111111,B10011111,B11110000, - B00000000,B11110011,B10000111,B00011110,B11100011,B11001110,B00011101,B11100011,B10001111,B11110000, - B00000000,B01110011,B10000111,B00001110,B11100001,B11001110,B00011101,B11000011,B11000111,B11000000 -}; diff --git a/config/examples/adafruit/ST7565/Configuration.h b/config/examples/adafruit/ST7565/Configuration.h deleted file mode 100644 index 1fbbfd280b..0000000000 --- a/config/examples/adafruit/ST7565/Configuration.h +++ /dev/null @@ -1,2226 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB -#endif - -// Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 0 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - #define DEFAULT_Kp 22.2 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 500 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR true -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/delta/Anycubic/Kossel/Configuration.h b/config/examples/delta/Anycubic/Kossel/Configuration.h deleted file mode 100644 index c2c9db5ab4..0000000000 --- a/config/examples/delta/Anycubic/Kossel/Configuration.h +++ /dev/null @@ -1,2394 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Choose your version: - */ -// normal size or plus? -//#define ANYCUBIC_KOSSEL_PLUS - -// Anycubic Probe version 1 or 2 see README.md; 0 for no probe -#define ANYCUBIC_PROBE_VERSION 0 - -// Heated Bed: -// 0 ... no heated bed -// 1 ... aluminium heated bed with "BuildTak-like" sticker -// 2 ... ultrabase heated bed -#define ANYCUBIC_KOSSEL_ENABLE_BED 0 - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "@brandstaetter, @grbd" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 115200 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_TRIGORILLA_14 -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "ANYCUBIC Kossel" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 5 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 - -#if ANYCUBIC_KOSSEL_ENABLE_BED > 0 - #define TEMP_SENSOR_BED 5 -#else - #define TEMP_SENSOR_BED 0 -#endif - -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 120 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - //#define DEFAULT_Kp 22.2 - //#define DEFAULT_Ki 1.08 - //#define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - - // Anycubic Kossel - run 'M106 S255' & 'M303 E0 C10 S200' - #define DEFAULT_Kp 22.36 - #define DEFAULT_Ki 1.63 - #define DEFAULT_Kd 76.48 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -#if ANYCUBIC_KOSSEL_ENABLE_BED > 0 - #define PIDTEMPBED -#endif -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - - // Anycubic Kossel - // this is for the aluminium bed with a BuildTak-like sticker on it - // from pid autotune. "M303 E-1 C8 S60" to run autotune on the bed at 60 degreesC for 8 cycles - #if ANYCUBIC_KOSSEL_ENABLE_BED == 1 - #define DEFAULT_bedKp 374.03 - #define DEFAULT_bedKi 72.47 - #define DEFAULT_bedKd 482.59 - #elif ANYCUBIC_KOSSEL_ENABLE_BED == 2 - // TODO get real PID values for Ultrabase Bed - #define DEFAULT_bedKp 374.03 - #define DEFAULT_bedKi 72.47 - #define DEFAULT_bedKd 482.59 - #endif - - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - //#define DEFAULT_bedKp 10.00 - //#define DEFAULT_bedKi .023 - //#define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 750 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Delta Settings ============================= -//=========================================================================== -// Enable DELTA kinematics and most of the default configuration for Deltas -#define DELTA - -#if ENABLED(DELTA) - - // Make delta curves from many straight lines (linear interpolation). - // This is a trade-off between visible corners (not enough segments) - // and processor overload (too many expensive sqrt calls). - #define DELTA_SEGMENTS_PER_SECOND 80 - - // After homing move down to a height where XY movement is unconstrained - #define DELTA_HOME_TO_SAFE_ZONE - - // Delta calibration menu - // uncomment to add three points calibration menu option. - // See http://minow.blogspot.com/index.html#4918805519571907051 - #define DELTA_CALIBRATION_MENU - - // uncomment to add G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results) - #if ANYCUBIC_PROBE_VERSION > 0 - #define DELTA_AUTO_CALIBRATION - #endif - - // NOTE NB all values for DELTA_* values MUST be floating point, so always have a decimal point in them - - #if ENABLED(DELTA_AUTO_CALIBRATION) - // set the default number of probe points : n*n (1 -> 7) - #define DELTA_CALIBRATION_DEFAULT_POINTS 4 - #endif - - #if EITHER(DELTA_AUTO_CALIBRATION, DELTA_CALIBRATION_MENU) - // Set the steprate for papertest probing - #define PROBE_MANUALLY_STEP 0.05 // (mm) - #endif - - #if ENABLED(ANYCUBIC_KOSSEL_PLUS) - // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). - #define DELTA_PRINTABLE_RADIUS 116.0 // (mm) - // Center-to-center distance of the holes in the diagonal push rods. - #define DELTA_DIAGONAL_ROD 267 // (mm) - // Horizontal offset from middle of printer to smooth rod center. - #define DELTA_SMOOTH_ROD_OFFSET 186 // (mm) - // Horizontal offset of the universal joints on the end effector. - #define DELTA_EFFECTOR_OFFSET 31 // (mm) - // Horizontal offset of the universal joints on the carriages. - #define DELTA_CARRIAGE_OFFSET 20.6 // (mm) - // Horizontal distance bridged by diagonal push rods when effector is centered. - #define DELTA_RADIUS (DELTA_SMOOTH_ROD_OFFSET-(DELTA_EFFECTOR_OFFSET)-(DELTA_CARRIAGE_OFFSET)) // (mm) Get this value from G33 auto calibrate - #else - // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). - #define DELTA_PRINTABLE_RADIUS 90.0 // (mm) - // Center-to-center distance of the holes in the diagonal push rods. - #define DELTA_DIAGONAL_ROD 218.0 // (mm) - // Horizontal distance bridged by diagonal push rods when effector is centered. - #define DELTA_RADIUS 97.0 // (mm) Get this value from G33 auto calibrate - #endif - - // Distance between bed and nozzle Z home position - #define DELTA_HEIGHT 320.00 // (mm) Get this value from G33 auto calibrate - - #define DELTA_ENDSTOP_ADJ { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate - - // Trim adjustments for individual towers - // tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0 - // measured in degrees anticlockwise looking from above the printer - #define DELTA_TOWER_ANGLE_TRIM { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate - - // Delta radius and diagonal rod adjustments (mm) - //#define DELTA_RADIUS_TRIM_TOWER { 0.0, 0.0, 0.0 } - //#define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 } - -#endif - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -//#define USE_XMIN_PLUG -//#define USE_YMIN_PLUG -#if ANYCUBIC_PROBE_VERSION > 0 - #define USE_ZMIN_PLUG // a Z probe -#endif -#define USE_XMAX_PLUG -#define USE_YMAX_PLUG -#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING (ANYCUBIC_PROBE_VERSION + 0 == 1) // V1 is NO, V2 is NC -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING Z_MIN_ENDSTOP_INVERTING - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -// delta speeds must be the same on xyz -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -// variables to calculate steps -#define XYZ_FULL_STEPS_PER_ROTATION 200 -#define XYZ_MICROSTEPS 16 -#define XYZ_BELT_PITCH 2 -#define XYZ_PULLEY_TEETH 20 - -// delta speeds must be the same on xyz -#define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH)) // 80 -#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 96 } // default steps per unit for Kossel (GT2, 20 tooth) - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 100, 100, 100, 100} - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 3000, 3000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 5.0 - #define DEFAULT_YJERK DEFAULT_XJERK - #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.003 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#if ANYCUBIC_PROBE_VERSION > 0 - #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN -#endif - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -#if ANYCUBIC_PROBE_VERSION == 0 - #define PROBE_MANUALLY - #define MANUAL_PROBE_START_Z 1.5 -#endif - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -#if ANYCUBIC_PROBE_VERSION > 0 - #define FIX_MOUNTED_PROBE -#endif - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -/** - * Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe - * Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN. - */ -//#define Z_PROBE_ALLEN_KEY - -#if ENABLED(Z_PROBE_ALLEN_KEY) - // 2 or 3 sets of coordinates for deploying and retracting the spring loaded touch probe on G29, - // if servo actuated touch probe is not defined. Uncomment as appropriate for your printer/probe. - - #define Z_PROBE_ALLEN_KEY_DEPLOY_1 { 30.0, DELTA_PRINTABLE_RADIUS, 100.0 } - #define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE XY_PROBE_SPEED - - #define Z_PROBE_ALLEN_KEY_DEPLOY_2 { 0.0, DELTA_PRINTABLE_RADIUS, 100.0 } - #define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE (XY_PROBE_SPEED)/10 - - #define Z_PROBE_ALLEN_KEY_DEPLOY_3 { 0.0, (DELTA_PRINTABLE_RADIUS) * 0.75, 100.0 } - #define Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE XY_PROBE_SPEED - - #define Z_PROBE_ALLEN_KEY_STOW_1 { -64.0, 56.0, 23.0 } // Move the probe into position - #define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE XY_PROBE_SPEED - - #define Z_PROBE_ALLEN_KEY_STOW_2 { -64.0, 56.0, 3.0 } // Push it down - #define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (XY_PROBE_SPEED)/10 - - #define Z_PROBE_ALLEN_KEY_STOW_3 { -64.0, 56.0, 50.0 } // Move it up to clear - #define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE XY_PROBE_SPEED - - #define Z_PROBE_ALLEN_KEY_STOW_4 { 0.0, 0.0, 50.0 } - #define Z_PROBE_ALLEN_KEY_STOW_4_FEEDRATE XY_PROBE_SPEED - -#endif // Z_PROBE_ALLEN_KEY - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#if ANYCUBIC_PROBE_VERSION == 2 - #define NOZZLE_TO_PROBE_OFFSET { 0, 0, -16.8 } -#elif ANYCUBIC_PROBE_VERSION == 1 - #define NOZZLE_TO_PROBE_OFFSET { 0, 0, -19.0 } -#else - #define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 } -#endif - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 15 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 6000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 3) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -#define MULTIPLE_PROBING 3 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 50 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -5 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -40 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -#if ANYCUBIC_PROBE_VERSION > 0 - #define Z_MIN_PROBE_REPEATABILITY_TEST -#endif - -// Before deploy/stow pause for user confirmation -#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR true -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR 1 // deltas always home to max -#define Y_HOME_DIR 1 -#define Z_HOME_DIR 1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE ((DELTA_PRINTABLE_RADIUS) * 2) -#define Y_BED_SIZE ((DELTA_PRINTABLE_RADIUS) * 2) - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS -(DELTA_PRINTABLE_RADIUS) -#define Y_MIN_POS -(DELTA_PRINTABLE_RADIUS) -#define Z_MIN_POS 0 -#define X_MAX_POS DELTA_PRINTABLE_RADIUS -#define Y_MAX_POS DELTA_PRINTABLE_RADIUS -#define Z_MAX_POS MANUAL_Z_HOME_POS - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -#if ANYCUBIC_PROBE_VERSION == 0 - #define AUTO_BED_LEVELING_3POINT -#else -//#define AUTO_BED_LEVELING_LINEAR - #define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING -#endif - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - //#define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - // Works best with 5 or more points in each dimension. - #define GRID_MAX_POINTS_X 9 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.05 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -#define MANUAL_Z_HOME_POS DELTA_HEIGHT // Distance between the nozzle to printbed after homing - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Delta only homes to Z -#define HOMING_FEEDRATE_Z (100*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 190 -#define PREHEAT_1_TEMP_BED 60 -#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 100 -#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { 0, 0, 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 100 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -#define ENCODER_PULSES_PER_STEP 3 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h deleted file mode 100644 index 960a997180..0000000000 --- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h +++ /dev/null @@ -1,2933 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -//#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 5 // deltas need the same for all three axes -#define HOMING_BUMP_DIVISOR { 10, 10, 10 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 60 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -// (don't use SLOWDOWN with DELTA because DELTA generates hundreds of segments per second) -//#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE_XYZ 50*60 - #define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - #define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G27" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 1 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 40 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 750 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 40 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 650 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - #define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 150 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - #define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/delta/Anycubic/Kossel/README.md b/config/examples/delta/Anycubic/Kossel/README.md deleted file mode 100644 index 874d71fae3..0000000000 --- a/config/examples/delta/Anycubic/Kossel/README.md +++ /dev/null @@ -1,50 +0,0 @@ -# Readme - -These configurations activate many of the new advanced features of the Marlin firmware: - - * Auto Calibration - * Auto Bed Leveling - * Pause & Filament Change - -**Important**: Before doing anything else after updating the firmware, go to `Configuration > Advanced Settings > Initialize EEPROM` to get rid of old configurations. - -Then you should execute `Configuration > Delta Calibration > Set Delta Height` and also run `Configuration > Delta Configuration > Probe Z-offset` to verify the Probe offset. - -After that you should connect the Z-Probe and start `Configuration > Delta Calibration > Auto Calibration`. When it's done don't forget to also do `Configuration > Delta Calibration > Store Settings` to make it permanent. - -You should also do a `Motion > Bed Leveling > Level bed` followed by `Store Settings` to ensure a perfect leveling. - -Please do a manual paper test (moving the nozzle slowly down to Z0 and checking with a piece of paper). If it's not perfect, use `Configuration > Advanced Settings > Probe Z Offset` to correct the difference and execute the calibration again. - - -# Select the Configuration - -**Please select the correct values at the start of the Configuration.h file** - -The Kossel comes in 3 versions: - - * Pulley - * Linear - * Linear Plus - -Pulley and Linear use the same configuration, the Linear Plus is bigger and uses slightly different configurations. - -Typically the probes for the Anycubic Delta Kossel printers come in two different versions. - - * Version 1: Z Probe Offset of -19.0mm - - ![Version 1 Probe](images/Version1Probe.jpg) - - * Version 2: Z Probe Offset of -16.8mm - - ![Version 2 Probe](images/Version2Probe.jpg) - -If you select the `ANYCUBIC_PROBE_VERSION 0`: It's very important to follow the correct procedure to set it up after flashing the firmware, otherwise you might damage the printer by ramming the nozzle into the buildplate: - -* `Configuration > Advanced Settings > Initialize EEPROM` -* `Motion > Move Axis > Soft Endstops` : `Off` -* Auto Home and slowly move the nozzle down until it barely touches the bed. (Do a paper-test: A normal sheet of paper should just feel the drag of the nozzle) and note this number. -* Subtract this number from the value in `Configuration > Delta Calibration > Delta Settings > Height`. (If it's negative, add it). -* Save and try the paper test again to verify your height. -* `Configuration > Store Settings` -* Motion > Bed Leveling (using paper test) diff --git a/config/examples/delta/Anycubic/Kossel/images/Version1Probe.jpg b/config/examples/delta/Anycubic/Kossel/images/Version1Probe.jpg deleted file mode 100644 index 953373b1ab93d79f24f7cd3363e4c949a1e90d79..0000000000000000000000000000000000000000 GIT binary patch literal 0 HcmV?d00001 literal 94933 zcmeFabzD?kxHi0o6r@8$X%PgKZiEpjQ4u6m43O>~QejjO6a=J1Nu^5=kS-Mg6%}cf zlJ4%BdDnpTIOjd@`Of#AKfd4hEPi`m_g>eEd&OR}SAzY5?PDBOcDFPGKwTa10|0h` z-3V$x03{N5g&}CRWhy8?LeK$1hzR%x5c>e}whTZjV*f8W2XW|!8yEsYc-t=vbXSBB z*_Iig+)P0K+l{{^Ao>x`=-q=qWugZF5G5-b+S%KI?K_9EhBk+kkP-mon>PXArTK{p zCiX_A9GVvPD0^oMdj}3hZE=nZmUbrgZq7hNNLW%vSXf3_l0#TTMo3&nSR6(L4&ILb zsV_n1?YLiZ{#~vgdO?lu^6top<4_j*t?yltpE@FrLnTRJctk=XqCyV{f2NP1>;cg) z`BNxj#|?sj5N0MIhwfqS5%h-<{EBxxjOdsBd>HAExM1#vk^PWqpiKVD{d$-mE=Iva5`Q{VipE8j{BGu1$ ziO3VFf5~)-G(W1Qi;>{R zy9DFGg$E5T3fx5mU!9+Z1o5*@!Pe<_8$>k!yA2{*|FaDuK>V!B!~_Jt>N`!(j{r|X z#Kp0V*e}>AK(XDT7$~X(1a=xwZ9f5%n>csaPT&hDcJ10lwu^#{jDmJI`EFW9Y6=Q! z#=Z3PjP&$-X(_hN57>G5`;MU8y_=GXl7@{$F5!h~+NHXjj1QKdVjMz3%VVofZ2m&Hv64G5{edp3Cu;2nj>z)4UT0xEZxx8HtKH-ELAOJs74v z+c#(IEWRf(--kyjT*pNDbrMQ~sadz*biTm1rp0AoL4`LW`Ob^TH?4zT!V7S**6FH5RkFn9BhN-M7K7+IkO1O!l9qHUc>Nr=U_Rp1n+BZ3+@a?ulu+zMsD zY4A#`X;zfmsL$zkn4&hLv9s9RK@yw-q&(uUo1qd(OeV^@5-8LDUn>0XHQ@cN0`?oA zAl#0V79hbQ+p`Yl7N^r#cvo~|rJf$Tt=iu*EIR1BYGiT2{J59t zhnr^^ZMoGfE8cG81voE79X|Oc_v(RmM^P+z-f*O`$7M>MeWFlROJP!J7CF5B2$tL9IAZqO(7 zb8l0z_ZSxVd@1-)bjh?ziAE(}UncP+1H%Jn8)YL*1uiZ?Gu04EzP7dyR&@ZQQ6Wk@)B}RE>@hTuH+qoMtZ$fr4%!r zZ02U2)XREb-A?<62I;yhW}`V_YKQjot8s^Eg{g5zB!{UTb7`u_TAx&qP<5+6gzv_nvPqm((*(0{q=h4{CGreBjN@Tlrb);0rJN%U=8)5Oa zf%271!;No@`u6Tymp4Ni1jWX2Z7D)-$Dpa1tF@7=_Trb@mS@79-y5Hv}rOb<2 z-ugG`WmHr3oh$R`$i;~Jtc3298f)*VnvJ#04j43SrpW5vYkk-3aun7DovVeuG89s8 zL+jnc7ttOkElw+lxP*CNE}&kL0XuM#D(vc~z9-)TSfN?wmx-r zM#U8qdV8j)K7DJ_s?W1V5_Nx8>C@4dmanYIu%IfZb9}D*vy5?t<00hgenva{Mek?R zs+L=a*j@=**K= zbgrgw+3EW=GC8962(BS)9{HnNGu!=7CrT1NdC*PGd&fCyP5v2`^V+My+BXEJLk^5i zbgK83`Hm6UjcB3ds@PT6?*_Nz`3#F8*`02YP#;)3fi5I}X|;!RX5Yi**0GXLTN#ul z?mpR{(yC?AjTlEIF}09Xk11g+2-V0SV*eO=;NCHGZi}+@g^Y<7Q9`0m;!o~=evyX- zD{WuAE{ZN$CnvBRamIpM=Sx|J%RU?lc-gl2t?5|U#ZkK%r*ZkTD-BhdDF5fvgj5gd zhwCKLLMAH%awT8Dd{JD)1ix3~&XoK|Wx&;r1Z>L$ri$#`^Agf*-dv_}7B1f_2KJk|DwM-(Z1RBF;-jl0Yoaq-IJJ6~6&Z9rU zHbYI-ujH=mcRP!z?)Mtu!f6i2R7bq$jW`~=37Op>=}xjbWTZf2NVWnks%t(}~ptmb@GaH5FvPDz{vRb(rNoo(tN z^!!|Y$mnwQ7Hc`I%0U=Ml+AVh&&xE!<(l73XbMv3>6NrIm{m^n+lZ)fKe&<{ab;O@ zOp5y69m4Qn=|Z3W?_pudS>@^1B*#oz?YV>%3GJpH>34byB|i?dTEr;ffEc)R9Y14K{~-EhJ?VL}mi=mNu!^ zo;?^yZE%c3QbaReA830XP9#^O{~Eo(X#H?aBStlDEosnqn)F;f8y6~J@adz45VrNP ztpq1d;wLvr`rgoy`VV8Qg1>Oqe^zBALq2c|!#OTY98<-G@AtG6@SJW8Rn zapJ>BamA}-++ySX2wDZdr5E z>C9AOeS3$8;*qVHMyt>6q~GK!g8QYMV~WQ(U(x{|nR;&a!JyI4vQJJ1-D6W{LIuY? z$tx;Ddv2%+AJA}ZtDC`!2gsbDRC=A+eTY7pcabmmd3YSXfp7;g!1y%#^A zO+U9{ds4~u+&g3s()#40ez=g(7ZzDr$ME_Y*@XxV)v*)Cbopm*`n@Ic9WFG49Dhh8=gZVpdk7L1^aWNOF`^#7D)RUOFQmebxXWZ?J{Mk>X4t(Kzx5d6HV~+(V zW2KXdvdzO-U#_3VtR2o=|3F>#DQIrbAPof;wDHd^-J5)9f^rR3ty+-vsr0+jE;*X3 zLUFC{$&HB6jSuDChc+H<^-A-qA2-#Fki01FaO7;6cJ?x`YyI?k{mt@v zl4PnKYRZ_uqBu%8C)~bZRJy#{(es3w*Ra9cv}wm_WbKW{Wpw-LBi}xB@tz-xArXHm zA%O*g=yE42WjT%g&C*xh()#x+a9lo~emum*_N|w_Yxfi;B|dSntK!o9TyKbRw(*gB zE)w!FL^Ly|tJ68dUhE${=dfTd_hy$s)~z7juS`0Q-DX{ZQ*SwIhjN@*qf9?#UB9f4 z1sY@P7F)wtL%xNS)|X%b9bfkQ=W_7JO;6^A;uVSf0?t>@uJ3EF?EPqm9znN%?vA<7 zzOIq|WiUum!jE;gk1T97AFp3#E4fy;@|oM(BnZW!QAfA&p*oa*Bldd8oFNu?F1MR4 zF26`vYdBMKyZ1BUfvYx*1A1fVTJOjUTe&UjcI?HReFH7gipMP(H{$jD%@?3r=JUvh zrR>UKJl9q<#czGtE6T=ka3y1T(!w{o@j6 zWYPP&12vbJM_JtCkg=!>m#bA5U6Ct{J&!||&=b3I(+1Qd_Frn?Gge2*d&xetjZeaa zkEijjB{ZWYVpb}miigXmFK#5PC9LF1bcx#0k1fqCO%|mV@2mG8D67`AeE8K2{zxUY zeyPWVuN6-1zdH2Bv3F)2`A*NhT30@|uc};l_FKJ{LRQxb$-}K();+@;NO9|fGYx@( zufta?9A>{}^`o)vOFHlqRQkf!)mKFw7d!OMjy>!sw&-4LxNPcb)4h3z9Fz53te~}+ z>w67nk>1gkHO^<9TanMh7#OY8xI?!;V^T&81_DycnNliV&B``K`>Rzl0oAiER zG&r<%bzExoVYGb#+pEiU(YMOYW`n@&N%Je9U2<_US)W zc$4v2rJF{07QB!mAW63JHi-8781l3jLFpW*`tBmr3!S|$33p%I?ZU;pRx!PT)>D{C zACSoW!f(xT(%58SU|f1yP2Ej_rpP(Y!31Ljc%(vmvoWY)ATWF=RdKp@H`3mUgnqR!D|% zIXmA++h>N(`mR!?&s^8pt>wen*Cs|&2C-m3+y~<#+`FQcyI$cNFO23B;I=JNT4tBs2Z#&%o#qp{$F-b0Ct7jnH$*!5;!l~TIS z=Dl%5BrN_G%mLVS!OxB4AN`tBR|Hqzu9rWK8FRTW;a^M_v;Wa~WhE-rh= zI3r`PHfOZu*?b(+d*niMwzvbf5s&<)g z-$qCX+NZkuSG=c}1#QQq4y2(f&H#lC@gv!xubeLt_HGqlk0M*59yc%;?Y66^da8>W zFz&AkEow4!2@!Aj_PMFREwz&QN3ZKEc8dSn?{QL50U;oDLQS0rHv$F#Hw)qtAl!dY z^%ugC8G=Lx76M7I3pc(dEG#Us?f&4ldzy&@Qo6-jws*B;NvoNX^ZK_rnQbl{-rFW%`rD$=i0e<{UUw zcQ|2VWN&YS8?m9@4p-aK9q0UnB?@PcbF&klsnc0QTT>n7i#pH>=X_f~S)2nzKD_MozyTw9K8=e?2HV*(v^hutWWRIAdhv{EInj zj&l9=ploZS^y>j8^LNlEjIGTzjI4}d{5ZX#`H?f*gJ4=F92_S0E=I@gzi)H6o2ru? zp4|x>e0L|DOmuYZP$~zsY;Yy<%bc(=;rNg2wVZ8G+xD97HpjJoIVX2DHAdMxDH);+ zaVgkVQqx@1`DdZwWSnD&+XZ^Y)NCi1zoONFqxJt$wA#itJNBAR#>e$`qQ#XS;ncQF zvolr)#|wAH?g+L^mS>y8%~Jd@$eTN5PB_190mt33+vZ12faA^3;Oaixwtwb-J`*l% zKjVf!w+&*u{=iuWoFV^NFkm}w!liB7lR(hS3^F$Gj+;5b72l4{)5p=jY(%#0FTwjy zH@GPY1UUNJW;?B`@EHJypIYze{`*ciilcu&|0(^y;kNT)7cT6dZwSG0*bcz!N4~-F zcxblUjBU63aF2w_@V1j4+#^8Tgx4u3>@w0e0Ov7Is_u4y$xbKDkKjmn{cZlR!}-Jc z|EKxG!7t+XD-7&hY;f;BZZMg|$lk@y#QCo`$QT93n|IX4RXZDdJM*96;Hu}J&nHm! zwmZ)|YG|2T{NT5fMB;2?X>96z-sTLhk|X{R5Aik!t#Pdf>Gp$~(jQ@ynmgIMIQ+wk z#NNr$+|usHyF;O@jSF34+YW|7Y3PEoS2eXWbuvVmnm`Mne>pG_|;6hj-7j-mNKTu~XDLVu?2C^hGkI_hVBHYK}$ zTK~f_nT5TRr-F^8`Olo9-bwt)pVm+hQWH}%LznHQjm*{53H2X1KmXJEpU!t1nJe1c z*gO4^xwJdspHTfpKri5|y&W#E$x!wV@CVJ=^v{YzZUZY4o-KuuJqlJRJp0|Sh%Nqh zzWqiW!bJoq;6;F(-IjNLyBM}*+?z+d?GEPx(5%B7?&S!8*Apl{fus0Pg!3DF;e5rv z^BMonXZ$;#@$Y=bzw;UY&S(5PpYiW}#=r9!|ITOpJD>6Ie8#`?8UM~_z%?lm|ITON za^c_kj6Y|0{y#IHu{{dH2?sj>(1jNQHw;1z6o3h^2S&gYZ~#qU0c8}toVO)7oC@gw z4=y->BG3jqgRbp;P0bIk^z#Vde^z7{}h*#gfiQUGnw3PbaI;0Dl%ukjE8f?~n}`f~;zB0$(T z8GxR;gog<5X!i=ZNil|p2$0JE0o?SM#zO?iVLJtGmXG5hWR!`)&G(9UhyZyP?}3}c z3wQ{boEUKPOAH<&K>qtD;AUGT9wI;iK^VB%CxM4Qn5~f=<`0An{X1}rsT2<(b2Mg$ z`3oU)We(h;X2V0s7|Mg2lh5(+2Ltn9+r=OFgL&?_!~B7evHS*ZCho;U$mF~LH^X1z zAp*Pr?%-yE3?3ptVX+msnbwAfkZHRI?y%47-s5IlsT9dHA2US)WQ(_jh2DBZ?G$Xs&2fNC)Y5cm8(9zy1b3y8f}kB10QRmK8hPdvdx$mDy0ScZN)gp6wX5(DG8-^7_d+~G zfHoQuko}kv4|kXxBlm6QPlTa8Jpgjvvg0AtTKO!N&_Fd zD8O^`CGalzHhBI_3Fg836NTWpOEVtAy!KNC&+n?^A!M%PgM1S)JcP{gHISci8xLWv zdLs?;!z}O+GIzd${Of1&5dLl__JDk0Lp+3xwGGIdq{l<}>pY#k&HRm!5e)?S>ih5z zw(%l4Am1Po4iA#PAO_y7+f z<9Zwvc534xWaJw`5t9iXBEa+RdQimi6b~U28VHK$YVi;rP=_B_2YC zvTKL=3lSi<`{K6Net;UVnPro-QPn9{!y0g@|VJkd!YIa&<7(24@dZb6`c zJOJif3akgoI>UGfnT>}a;rKH=gv=TVh|`S5LjsT@dkQ?}qySIPHiM{mX7FU72Sgd+ z;(1~p1EP4z@DKqKQj5UDHUT_DfVk*G;30h>9wI=rYb1#D)51dpaEn|65syUh5Hi{X zAi{*@Z`>Xm*;(^N3eODK9)H31Q8HPeP!2MJf_BaVhPa*i0><{Xg6@V6g2Dnqg5Vg^ z-NDe<+7!iMWC~Y3$#Kn;S95V#n#gfo5LXvccThC7usrGMWUB3XR>#=W+F06z3n|ZW z%w5La*1^^kWys-fYh&ju<1WXw9k>jXan^!d9NSJ%)^c3i`*k@ks%vs6+B=zYhzkfE zH5QT(;*by)fZLcQB_)q=z~!t$f?ff!@TVCj`0=J_n>zlGY%DppYln=XF>Vz# zOuwP4sR`E)OUwUOns)+pvoM9h{UI)^O6WD;NKkhHwXUBfq!%0-yHb= zQ4aj>54EL)T8aq3vYpdXPumSiP$$|Tx#L2(Say#rILep~eq$UT)Z~Om}L~HEe z1owd(GW!!cr23u1@xTl5) zx3Pg6Wom2zWg#e2IO%A?jbuc};C>I^=<2&+kZ;_;qE^Zab>&1FPz&h zGsK<`zwLhe{B38S2)A4kHcKjIU>#rLb9!=bdZ6Ndv=tBv8#8W$%HXV~#KyU6*+Wn(9_D2Z+O>cjMfD?D>H5BNR zF@V890MIlt0K%ycfQWuKAiNR}8N{!0J41FJu1^8r0{h5Ly@xX7x9|VB5rn`;0%uEe z4xF{3mJWxpi<2u({;{Er7;Z?UhKJ!X12%8~9D-X3MSvub1;>FhI0ZC-4$uSoz!Y;WB@p%2#P@kcm?V}1NaQuKqvSPhQI`v1W)aE*wBh@Oap=qQma(Mcj*B4Z*)B5$JmMA1a)L`6hzh+2sHh-Qf}#FWG=#D|Gx zh}DQM5}Omd5&IE8Bu*tRB(5cHBOW4NCLtl&L&8fUNpg}zkHm`PI>~*KIFekFmn2Oj z10+kNq@>KGhe_o~HAoFfQKWvPk4dvht4W(lhe%gyMs{tG(U2V^lOfX}Ga>UJ3n5D;Dyq3I+ zd|~(Q-CVn+cc0sBx%=ksN4uZze!IJG_ZkHq1wVx%#T5z{ieQQ~ikB2$DHbRxDS0T5 zQ(mG(Q3g|HP}WfPP_9zZQwdP1QJGMosbZ*#sG6y!smZ7hQY%pFQ+rZBq%NRtq@JW9 zqv4@Zq%oxNriq~`rRktqqNS%5rq!UerM*v^N&Aj=l#Y~+hfbN!gwB^PiLQojfS!>4 z0KFo;F})9cGJP%m5CaJVFM}F`6+6~WM{SSI zo{&BHd)oJ`GqEx$FqtylW6EJ_W?I?1fA8_Vrh5bS=I(9VyUxtPtjui99LikG+`W%z zAOF5{``q@$@2lN6xu0Rb?0)0@0sHg!e`6tF;b+lexz3Wr@_}WEm5o)E)q(XfYYpop z+a9*#Y*uU$Y*lPy?DXvN?3U~i?A7e!9E=1C|a~cbWZHBn5kI2*cWknadmNj@z>&85|R>55;+oM zlH8KlBx5Bzq!^?$rS40;l_r)xA&r)`5lpQ_Bd(8A$^05Iq zE;&QFr*hxrIpnX&Kau~A z6kjS4Dyb?3D1B0d_@xO&&wgJ|cHvs) zwM|0}!$iX+BQ>K~qgi7`<0#_^lj9~4CS#^@reUTdW^!g>W~1hE=HcdJ7D$VS7L%5W zmeH1TRwu0ztX8ZwtkbNqHWzGiZFkvTvn{owv$M8)W6x&qZr|i^*ul@?yQ7R_q~om9 zX{S_Yg!5JB5)=dcnEK#y$mNbppR2rUjO(h~dA9<0T6a754<7s;_dG^CRXkI!6J0mH z{`v;zjaxVRycE2idLz7zykDaapncIpH&t(@-y*+dee2_Gq1$1%7kw`Hl=-sy-t--~ zqk1RHkIK)~67W7yDDYw6=6&P)?}LPc9tB~8&4NFL zNQA^cAbDW-pgj~BnjS_Q<{35+t{z?#!4VM_Kn&Xeh=OnNu1SYIMv3&C7sp`|BM4rTlNhC?GNyEwK zlj~EYQZiEar3R*MrP-x@PuEI+lOdUrk;#%7l0}f^k~NlnCHwO;rDr8MM{}O$?#T^& z4rleAkLO*>YtKKO|GGd5u5UZ|BDRpeFrWxgiZv8MISxi_C`PuIS!Q>m+|SE#Rk zEBChIoy@z^_fqeR8zdTvK8SxP{3!mh@RP)+qDINalF!ng%bJcgRW&1YiieR|I%@#=zRrDf{kGA0vx~SZpqr-qVGm1BVlQ8B?stjrm3>Nm zANsZXI|qyhCI+1c;fZ0xl*124*hex(MMf*eRK`A!UmhQtaG2Pb^qZocik&_*{bJ_$ z%!k>FvqN)EbJ+R&3(N~?i(-qfmo%4pmTi|eRsvR;SJT&|*6P3XdoSB!n>jUnHamNeOl#$N>3n zcoa2)5FS!Wh|`FGgv{=O3wv$2{R~&9AG3ncVdqrwp&=@)>ETBqGWm8ubLE{W|{hKi@~#1_ZlnBCFb*pGwVnwoA8o5`-H2Y zaQf<+x}2Bvy|bzfS3RV9!A$Dc39G-4S3P;r!u{@}^pdwVJIV?ER5fHwFoMBtMl0)cX%ipEFwlskSAsh9T`43-( ztS#lzA@xgQ!pBCoiZ?YXvn`}jkn-94cs9`TrR&cYt5+RoPFlxZ^^DlO>N&EtRQbhc zu-lrww!?qJ`g#-PCb}V)CgT)UrSlfDN444#S-)A9;XIhon3Ijr=YDJteKFA`AOcb-#DjG6Ufym&E;YtrNk4tQShz`|MX^u7A@Mc<_SN@}bDL7rL01b~!{u zkc^!wQ{@y!a-gTJu2SF2J%pLOtG;s?3u3Z+FYot~E7D~OIe&tDZX)sc$OL9?y6mYu zx^LoC;W5V!#>)?TvIb9%Yc?HBUg+6BC7E-tNBFvvzZjbL8dU9G%d|6MqOl3TNu zH`=noTY)#sJ!9ZOsePD9&jCH>l$-J;^^33iT8%%(f3JW3j@$Tcg28%wH-)rDn1M`M zTG%lr@5L$c8xgIA42zM~Ec}O!FXo4O)eS&!H(1~} zt@>g)#@dX(@m4VPsQ`3MRSzS9Uowje$<>XOkHEE46AMxU;h|~*TL<#xHa1_*)0_`r zkC2tMHxV9w@R8B2zA{i%f5n zyI=_mGULsMBpWAL)MfbCHWva}6han1qdSpmK_m0p!$tID5zi9WEK7tvB;TEgaU+Zw zr@D>ddhufQyLq6jwnEzyYHgqAhqq|P^8$he$$pXnRtelrIw~1*i9O*KvT@K*oARJVCc9^MZbB5oK zG9gWS)(DBH`<^_( z9F%;9v`fMezO|$-Vu?SV)2UB55IeW#UOh?0%gWfb(K&r6V}BcR_+xPchPL$*RmYk- zd55CG0&k@gvqErg7<-{l3g%M`ABE@B5Sb(r}Qy-P{ij2rcXPHp`bC@x&P%Y__WJzaPxxcT9}8r~cM_4)cNfNFJtJ2{oxYmB1?{Qu z+qCxlrGQY;747wkuBDnuVs0|Td*q)y=Ao~eJk~gI64iMCsnLZuZBZ- z|FFh}WDyn=c^5QIvu+qr4ZbtJJ~QNs6fW1dlDq57&b6_3V0l@q?0);JU>~bNS^2Dk z=R#h7ddKuIi(XGpk4(=rEacr_h{1&8`v4u*AimhuFpR-{li*`~L;7LpTuHf8C$A26 zU@R4|;F2draZl}3_e^Qtxhaju2BJkDzI-gEx7$j2j?r|jl$>L&rDSQDK2}MzG2%VV z`YyPpd8>rRsQ=B@pv=%#5g7{vt=(T zW9fqjC5$D-%_Q=JWh@;vF?DQ|rT*`9TPJTIXG2J*`|`hdq-JmR@|@6VLV{ze&k z=O5h+)26JvEbp+EIo&&JD5uWp8|d#oCl zr_~$7yZ4@vFgKsP(bJ#U@O{*INnF*&G&6s1D63LL+Vse6v4G4|A?)E@oYRehllv{G zi&a(A7s5XTY@YE(7i6a|A9!5q?^*0z`7Xnv=Ujm117v~jBF4*}`0bvfjmtsRosO8| z5=NSX$M;TfeTni^vOu>@wA*`+Z(Z*#ThU*cuI#AX$aR_Vp6LF+Zh>v;Z4FVcM$T1x za=YJKTgni5cJ_tMOs2BIs%G76U8`2x`Q{G0Qo^Pt9rMx56o1)fDVepI%SAWe8$U@- zpKFji{+XEqo2KM;>@VV>gf14H@nt4lYFs! zdy2DC^<;r$tY%y}A&7Iz3XvND{F9cLRXEvS8tbQ(NL}cc8O6R5equ>P`7*bbj_S0w zpWD;f&ePG&PoC#^UuzjUcc0uPDC$ALpnLUPeAsMk5I4i3{xJb7qYGK?J`-eRVU=7vh%`FmD?MJ__o6K_-Zc|L``xdAFW>{Z+Ae`w*WYK# zaO-QTf1}uoymx~ece^aa_ocIsOJe~kbwl#28B$s-U>(aT9Zw&dN4iHy#oC&xpORD2 zkP%)BxU@d$!ZdeDqpD{5OrgB$s+l}$ga2aUf+D3(Q=6KeHgE9LGv~kWX&s!cA9kKd zDDsPBbFoq_mrF+1dtQrwC~e6v^u;q){Jg-KEb&JV?EcUR&8xTo~)+RbAG7 zwEV8F)BBR=oSvfI>EeZ^rj#Q*Wb>&MIr7n&X_OkeAqmS4Z3Z>opO~8scsspDy7Xl( zkfbrPAK8Ql%$^YO?4gVI|BeL-)vaiO=;6fdPwJ0q`u82X5g8d#>WLh1S1UGSpL*iY zI8u*h=v*?WsqVT;`lVsH>Ih2Smi9Dz0J3<+h4<8WgGc}41u^dE3w|2k+?O&K5;C9E z+iO{wr@!hylUJV4R9C;?k z_PzGAsl{PoIxL`NpWZEgHEM$;8)@qQ`n7Mcb|4^KF0H!AAM zU*HU`-ACOYu~2_n?uZ^mt=TD7hCKI8C)I;WQ#M#|R@E{E*)V(q)7bdz1;N-2!)SEY zP_s(T?Zo`lB>P6aptSV&#nI&qi@h~tv*Kdn3ANUV?`^y1)E{o#I<3C({Pa;C;~KGq za^;W!sjX*s9)1g_$Pz#z6%+JBOC*s=bqV8ZsP2+{G3|!C>F>^|7cWR1i_k%vmt|S= zcAV}@s2NV|V(9Ins6z66*XT}(`uHeGqdP4)W;0$cc{g2Qg~_8&WF!f;lvcaeXf+P# zM^{u{Hz%QJ+0wtZxOSzD`P6+`yJJHxM^(7?=IiL2V2}z$n02xd%)!eAd25w5FRI^H z+rJtLu(6RZH42le>h1pcLdYtT`nqF3G7kN!*|+q1GUcJPb^j-qw|@3dR60C~jg zjK>XEyJMAZ)(V^E)c5KP=f3hsPY3m=ex#&gx3sxoORT!-wsA$BMO$|wYBR~8OO5z? z0b5*wQyO~{>?x(`S+1bNa<8SWnx`#b!G-yWQ8qODq}Ko+!wH#&a}PX+rn{~GXSxi3 z_Cu<%&Anf?yqcV)GIlUcsJgDi_6m`$URmlJ?i}R68X{MKp(kc zA!p{aH>T*WNZ#4;`;=ZcP|uZzqwOo=h5}^VpUkUd7-vx)ryUxnLcf-Oe`CV;=4OR9 zW}%(@Jwxb?2x)Snr0@oEISKm%8X5+h=fkLp#B11tFb5x`z4z#ONPg+!)9h$VHhyyZ zRq8>l0%EOG;qyz28}cp3rNTs;J+vmTv9K>z3iVl3uW!LJcR`nOZ#ksOwU?# zUX2LNIwX0JRl9Y-@r8IKbK`fZBt-=xsbl9y>oE1*9xXGL4$W&%JJd1C+y(U-=gfW7 z335~^66D37Hs-h|$P7v{eDi0)AYt=+dTj|P(w)|$v^6!AZLTCa%;@_;r`=2>@TiM< zujW?B9JyziO`UvZyvM=$hT&-DCv(ayPVd-*+OBf>mHaQCJj%Gy$$9}Bj*;c`8= zjPex^lJjP;&+2QJhXT199U4KkYgo|WOw&FvS9*m9>7dg+^sa%S<=jU-8D)%}hE0x6 zq+I=n0MF(m5}%f!W1H(%e7n6gkI8y!4IJW0+3%WDMwU79EIBtLH|f(yDz*g1BN%sK z7l(5u!X=qj357MI0sAiHRwQM|sIF@9mONOZrtm;t>{fogg`z zJJNDy?_~OiX4CnNTxMc7(7CaD+6r3W-bZy6L5 zL_Q;tahm@4^uCZia>-+{<$}Zs^80a&E-X&%I&wO#ZPJ6$`5JvLUj>gb9}?E-t;EoTNLqzNwBsGyO)ZklmR=M)}i6gT%04h)!4G$nybsytZinMt~)Em~5$NGr3tT z+Waf#X^SWEbNU42(v5YWM;K-UJ*rF9>|sxR*y96Y_Vqf4)o%@J1&#&X_UH8N5|^f^ zJ$ig2V`9vE-U9tyBfMeRTUPIs(cRaB*6=8D78$#XNiQOp;qmBM&6Prf$*EZx;p_rP zVUdBV7U8hmcXl_T=7`=irzJ@15$%7S8nu6A?UXzFWQD%v(>pw27vX=eajsk3lmALE zkZ+4i_!dU7J;kI%vCnu*u{}6~z`G_FX$ z7IRomi~)rOF#U%U8v9djhkV3XN%hawvj|RqLzl(XpWBzgwCQnpWMmoRWs2;cn&9aj zVNQ?_~(bV0k);LWgVTjGB78oj|`cgQ0^V3+{1=k z)l^rVdoShmsBEgQS*YFENi2NukX1^;z=)oLB5keqV4guOrjwJ1Ug7l6*0&dDVRuZN zM|nftpi5DsHe+mgLJSUkASU)yF0I00loCZ6rVpHL%OiCo|#vhdim|q6D)ADuAf|U_|DgC$m2VwvCLkxSu!^e z|8yvC$=xP+@B^8ZaK2fduCDZzGBIh&cLq#fSC27>PE!OO6kA0vpogDkZ_TW!gl{IQ zG5Tu~++nC6(r9RCNKKW=yR!J$w5D;7te|e(OWpp_+QYSB7{29&wvJb-#|ZapkgkMJ zBYkx}1_G?sDKsWO=1!Re8?d0pkJ-&om!FSrf3)=?#alNwj<1iHVKZBmiri^ZjjZ#AN+DJfMXavi642}$qePf2`O{gL8xQfr$B*SyZj z$EdHw0&R_SH{PW!@Z6++PAw2AEXm7Wu%$CjNy+@m)H%`9YL~;@lWb3Nxl;f7mX8KR z^1DPC%P(vcV+Q3X8kegK7?1^o4T8aftmcI$dt?|H;Riz_tBCf?x6ETj?I%E$0ybotyO;GeSW*)!0|59S7+soc^AgCm5UF&pT3$G@^aDNS1VS@iNz;iwlRViQAJK)&jvmKcTeDB5zrx%=f1Plh>N&YMZnCt-SAbeD6p4&* zZfa`N89uz(8NOOeq@$@3@U(90-bdX5$JI>}jE3YI?_|5$M%Agu$cAH@Y;x9b)=>Uk zQr|Mu(=$db9IxLFmaI|N4(k%584+PF+r^o-F=>lh3+exQL{3>(rJ7h=r@9Vlzd4vt zd~V;PM{x%Ml>zo7>r3VtTnt|Kt~Rb1 z&KE8^8ID_Ci>9vhx9Tt0f13V&s?TagYr-I{me*hlw^)58u9idh#Z{5Cg z%jkrmjzrya^W(9Yy`~o5FAMbaAr#G`c zI@5AsLHQ^*vLZxqqhPrY3tSgo*cD>-Ru43^pSez5ZwmjjhTx`0**Xsv7`Ug5wOgV| z_2fF9{m%?Z{A_-=2R^W^y)E;w-}%lgJPyQ z0|dD>b*@MBQM^=9KAQ2yvptPe{^m7W#R-L=3lvsY;3vk|1}Phh=x2NCmHhC-B@4`K z?{j({ZTbv|lyp&zys7bfYl{Rz3g183Y})cjZdB`@BZ?@{>Zn!K(-Yk)?s>=5rFzkp z<+yLai=uh^ky96R(e?xyQOY)z!^-Rf@(B$gRIJVo9XiTB^&hnj{DVg44eEHFruuK> z7SD?7&S?;dYAmm@6smi9=_<{94-l-#_A`&ZSk*6h5Lv!@T#B~^BRDy~f#z&czjZcd zp8d_Wv@{>y3!7YJ!67_j{Ak)b)rhB9z?mSu!hE$i=&LmI+}f#o&4OhC;WM!4#Rumx zy~PnE$LmQM_j0pb`y3h~v(Kab@pu+rMyjWEdQK#}IHOLasP4NJt!s{7ujY{$OlCfb zCJ$gv_Z|?xuqprKaZ&(9a!G82n73HKZK=Uv4Y!h;ANy`PUKxg8hyurJRiqNQqI(P( zojYVcguZTiG_l-fqJ)aTM=;IJSZY9*m)no3{ZiEO!>LWFD~uis`llY0BBL_F4uow;w2Q|VlIm|ZQY z{K%xwNmqp!gC~&IrKN9_R1&R5ZJ|rz>5*-}^mS!8p$MV}IM%ffv*>+(gfyjM z7^exYI|14nVNt&W23YAaNaO1&K1n)vvQ&|iqYZ55Zqz^N_)vy=V4+&wFfluQ&SbSz zqNf9a0o(_u6-|MY8G&%DoY=iZ9}S>rrysZr*V!PmGG*3uLsa&7aTe0!5^?4siB^K_ z9`_3Bk3MB(JYk9tD~c}MvoX>kcPxylr`Gv`f(Wly#F>FgWu<>4Zd)Aan$|u=qx?zl1)nWQgdP4lhc#_Hfo?BvN}JR!sPhtDc!!P2Jjq=3IeMGf5h8e**bE|FAH4 zfNN5Ee_Bw1%T{Fd>6&m7p|a5O7!wMhFP3!`cuYmq;eXqv{Ey~vGBz{Hfd6_)PDuM1 z_g!n~8l|>5c;*KKZ4$4nGH=#KIK*b1HBgOuyp&V%ypCO4LyOffQ$g%QA8a&gRHe2? z-$CW~4Fp6sh1%Wbm8jO(O{&1uqN|WI8RcHy$#yi6vh;#aMZNtx&#weNy@vN8y1eq} zf?P@`*je^G3u5mupilA&GoYtCIscd%&Xt8{-{}5nXi7@8lajl5vGC}vwA39*Y~hdW zd_1oe{?hwa385{Na&T-#QUq3+w{bQ}Qv_R%{T_*ah{ih1qarFy{*_7Y-(2&$Nn`Ze z?XXlkdtibTrVYeA6OTTUY^>Yk!5%V@j~0eZr*uE8igvr@pDu^l^Eim~g-IQrCa6Z4 zczh$l<3?KG6YU592iHxog@_x?OEohT6t*eNH`_T8C=-9tKq*t~qgzJ0u^9{)Xn?Z! zyQnu?9=M7p7&NH&>Qk@lDz=m%1#!6jg7wZ(1ah0!BF8oowf}sF>Sun>l~#CwD@LS= zaaL}&9)JZ>?-jc#Sc3h5A*};{Txr(hmqopwaKcpVPY$luI9^q@d5ZCj>o-h%e*`s_K5w)C&gR^8`@D$8_wIG^L%LgBb62tdF4#!>w!t16qOu|o?>e1m2i>2NDhHOLq*Cvf+ zQ=#4E7msTNVj!OZskdX7OPkX;CLOD!wQMQFA7Wbg%-r-{d5?jqx!Lx|#+E}>n;{EB zD(%HNqou=hx`a-HgDQQ)L)3cfbW$-X^`7gi%1blY4-ytKX11@Eb)#UydaFcvR61ky zG$Sif*LjV0Jg4RihH#5%hy9M=!Bv*#{8fg9G_pn{S%j5>pL-wb`d>+82)_sJRXp5> zMfs%?tCz_u*S{ygz6z!V`V4i+Z$u#B~|z1 z$j@rmV-79YZk}0!$59jEOI5$%Y)U$2Rm5w6VJaCT`<0WN%efnIY*J3nS0fqI+ve8P zeiik0aQL}P?wac%%S(gx(K(=V7eW_3P?42~pC2DAir*4Mc9QmwB3gZ#2DHaistvED zO)9PKSlQma;gap{AAabgHM*A^?_S7xLs7WlnTHD}~#kziITJtARJQJ>>*7ttKX)=8-h_GW-}~ z6MfS+7css(OuQ6_F*eEwuza+7(3df~*Y>?2Tao8CooEjEQ1Zj7{oE8LL=W-P32e9ci%&cbJ-9=hRWaX#c{ncqG&{sXHNV*K z(s0@~VmgGG`zFBW_58PQ(M#~K%jFjG4|7{jE z#(3EVa?K;?C7HA(|KZv+KL_E>ws-&G-+cEfZ@G@SEm)WVaXw@F4#{Pd5=ug7kdhP* zO>YTK>;s1^riA+IdGU`wWNd>N6s>nq$ARZ`Twk>I+82OV;T;yA#uX8Lq7<_h9aUBK zNL@p5ij-uTV%y_7-xd6Fet-XRH~cCQz{nQ}1B(U4c?94Ry_^AR+p_M!RE@wI%*&LO zRY>&s8P`AsGlrwe#YlzL)P1xT(bOfmb97w({0>%OI!7U~oS}GdbCB|b<6jXd&7>8x zbv?SQm#Yrrsn#}0CV)~5ZVMZifED(kyQC3c!HAmSsG==)f{vgni_z!3L4y6>-riXD zc{1kPa&!>aQE4~|(tu+KGhC$cSfZ^twVEi}3K8k$>(Z5F%{^hN0YU@k&S^b@L{5jD;MbP()u8E? z_2fQy?sliCdaU~CK^-%n~T)yq@@xxKs${?n4yPz#@dmo zrDm~8NY3|!CyrXO6{Jai*K4ulKDIsO&4|qP{>WHp|676YIY*YxZ2&$L+h~oJ##tRdyuJALsV&L(*-t8c_G}Zyj|Rac2h%S zn1qf>kxJNWy9VW58ykp~K%+osFn4xBToT`@*-yRW?m-k;i^;wxYbHpt!wJ)@yP(?- zhI4%uar4)=(l?e&|GatzdPHk-xyxKsch=)hG#ah3dt^d;dv6JWjZWi6b&R@z-;Tou zXyURq^ngZ1`>9xwP2hrA-Emrymlp~CIW-Blxo|*Zng1GW)N6IydrFbeAb?ywy~|v* zwaFIK;XF=rUZ6bNTcwK899FXfc@rY#& zw3>ow2T>}`L9S~7f5}i1yDIapd&FNp@B9{^1l2DO|3~tA z<1+)tR6t;TBC$B$#N-HU+R(>w;q4`pm@|EEiBf|PEhk)qYp-B7* zlO)v(#IT+NE`BH29O}F@b;dOfOZ&jbmVau$oTTSEZ-&=Lk`kxVmVL?TT-=w%#n$J# zHV;aO?&NK#yU*%ubn2Hcxtqrk>f256d70i`H&E4Ho;wDI+)Bm=LFfJm8)bdJUbV}` zg!;#b+totl42mi6nT7P0V%(F5Fvb8Qjsfp2S~!}@o$&gcjo56vj*r#q+gFC#+WiEs zG~JzDp(OYx1q!QAbJq3=6B#t!;llXAiv=!zpE4j(--dN+nIIzW z2bsNq#}r?ce(;f7?y5*T$2v7UwO`J8CD+c#GM}{`d+Zw9YSILsR|x~x_+>tQpnJL6 z-ecP?G6B^7;;fo0XL>ZtT3a7r+@cbv9b9qP7^3C+nhWb-C15Fv!aGlYPceU$t9|U= z*9(EBbP?ahu@26!7MGNSpC!OA7F0%iNig_iN=nM4pEISy9@Tvul zDJmh5cHm1`fO6#YS145DvxuSyx$aRLJCH&>-Fe3qyO{FB(BkG6TM;ZH^f&8o`?Z+y zq0vDTb+ZqLr6`&9xt`6$`ueImUSxy99M#b*{bmQ_`FjHMCVm@MsG?E~?$}-bX1lu{ zYx1DjAVdwSjKpa)g`ehNW>I~3WDSD z?y;tO)q^y{g-Gpz#pQ$GwVv6F;YCqhIOJK{8bfrcuQNMQsup5r! zobQd+Q+?sh)Q-0Ae>{zK`m~n+YpLe{Gomo~{~DQpmn*H0;7f!dhc~E#Oh;|QyY99= zK%Q#Na?qb|HDS+YpI7!aIuFJ59?_)P0;-WV-g!>8RNJn#!E?(L!># zg!(V%qYIBLu53jdgO?5|nB5R%f&h}R6P$Tj^f~lf8;E{^)^yu!l){VO1wHw~VAS*? z`rLP&JsoH+tuYK{+sFejf5xA*5qdLdv5w5>`#nNiaIUw+N`8Oj{ovFqUHiOQ=I-Fc zB85>_KXC<3V~Am0ndA}%bjCqide1~t(Ls7`ty|GX(dscc(cj0fRk!S0in*M;Zjx6- z@DR)f;H8@KTUJEBf56flsw!Nn+AJE}LXlxy>ed_SDoR6(GExiOhERpn$_pQIIMcfg zV%|g@ShFI+n~?R?cc2d0>esbC~B-BcGeG5#a`Lt{0 zdV~E_2$}G1tw$(B-`qoZTzLqWN-B)y+R>ZPz4GF?OCQXzH_$l0u*K+5ao|?pX#w#l z)h~{k}?Ej{@l0heUNmx+MrTQ?jGT_6D%Y>xFO<= z&06+Gl9X`Q-0Fy`^ZOiz(|y}QG2=9bu&JJQlz&@MpH&Cj3Dds^J7J=D%kPrJJn$N6 z%vN3WGyzYBD#P4Fze9LBPmHg3Z2_Kn#+zw><2;8y=4lwz4wJ>RI+~9q>0yDv!kk+b~x1JN0$fN(e6S zW}aim_-W_QnH4_Z-C+ahfv(Y-N}(1ooky%?PNj`LhTa#t@$cDpc?Aq9WIxRAr`_mJ zTfOA`QVjnrTJ9sDFTvS$Jr$v|WIDsTg160(#*8ppIIOY`vE!O!R4yK%#<~7A=HYq3 zh*S|kTN@;mYWYQb&QUiz8dqf0Ib0=jnTLhf2fGK zLoS-CCuo-5aKhyA(Skv2qkaxN7m{$C;7T6Y6pZA*vdie8uTS$_N{tL3P}nmD1Nd>= z_W%ES$NxSE|5u6RKY`jvL+W2b6VNAJ9FObxi9BK2&I|Q@#Bl$^2{RVd&Jb}AQ8iF9 zOQHXJq}~<8I1@Qe(R{_D+m_0>rL(yeb`X)mJ|u)Ik2q|B|9N&gmUCC|{%cj^q^?Eb zuBRrYJUgMamE#Vn_#`Ztlg5T&J_HBp?HT1&Zj(G>x!?+E#DznZ+OQ+w$&`UUA2Zs2 z3fq-Wn7msb&P*x@=j%#wuk50fVk4X)&&kB^48kvdgPkxj0rdJ-=UIh6Crp`UyYL(Y z=X0Yyo7YsGNQ)pu#0pp*L&g~$uLZDk+|zCm3lZcRu^xV^`bQ(-`D{VjSM5Dzmz5WW zzumsj!BPwuRoSZlh9LuD4yw5%06i1wls9VmnfZ)I>>JP5_*rku^9m?K>i`BvD&;}H zt%9JOAWSVvi_OV{e`B?z{-ft_R~HPeQ-BK$pzg$xQFm#HR0Rc!fG#h1k;9&JQ2fNT zL?oVsB=5zo6#+pCW=c~UpBT)*fCb-WN(+p2?CGI>Qd>&{8K>u;#L>(!0nzXb>s#Xr2xX9D|WZO~pGDL38|sTt@^*45_&$0cLm^R@+*NnT~j zJZs^m(zE@&Fr=I~R8!^3(%L$XArh}ai-m}Q{{p6;19ccon@sv>@pjbY zmB7v%DxCgN_!W0zi|@|}vyfAgrN#XKwg`GC`y^1m9$PY*L4E#S!Akq$(&1I`7TE@f z44nW=tLeG^(-!G7FGbrL`NBr8o{ApnrmXdQfrlwSYb&HW*I$$kqn$+7@l~~Hau&|K z;{3vTTqUU{e!6S8N`O}73~=uBeQ|Xg13dC$pRi#`7seGfWqoR^@r@)fUvcuy(N8dN z4QTC0xR3j&w}qflm+NpjAwBI>`lpCUY?RV$dxhF|e1pp30mNJ+D0Wje0|My37ck$S!6#Ogi$fFkQ_9M?y;s~|oj;*s zvcDp3&BJ3x-Iofs!*+Qe*n+lJ>(A=S7o4YEGQCDCpa9(Vxgmcwp|ZC$UImI}A33NQ zftGvijd#$0Nc(*s@m#1Zj`m)U!^k9mvvv*G=QTl!)>;|R)c6Lp;63W8kmm?}#0~(l zCWnpl=M9BWbH!Bg#8Rn%y%5#W(aJ{E5!XUo#~dzhz~DpAkRQT-7SpAaafM!)*{1HW z^mbSaze*DVzhJYk`hgjE*G^hYa6yMvTHJ23O&_pv-DOr3W_ZAP*L{?NDPcD!vr03h zz000y@(&OB|7M+pWOQH}(1nL+XKp(RMuO4=pF;jp_?SiiX~wx-f25TY`LR)3y9`PH@eES%h$w)=i^nal_@PF9!|LG?HN!9;*@=5+pr+*BM z(DCL4Sc77CpYtxu(MWn;#&FdaPFsk@@%qIFCI>_X{{Ct6m$_s^&(F9bk0 zk5NszItB_`2KPUdB9I-QPMC;A*i<8W|4_Gp#^5>KDb5UVmVMla52@+{%kBrt4y6Mk z3Mhc&+DQcRnu8Ch3Ukd+C&a*Fh5?EzrY>ZjZ|enjFB`j%!*r)V+ByInrLE<>?@qeIc^S1u1NOU0owg07 zeQlGV`Elx+1~|d3N>wBLrQR7Rz2bhqgFS$7l5q4MxIaO*{hbdT2dQN9JT0KzfYuQi zxgZcgJJu`K5m0UDduUyAl*r$2N>k@l-~Ns0@i`WzUWrUJP<2uT{~pzw-+`IZOnBhW z9lf>T0UJM6H|BtjW!x@lahS{cYFvpA+o;w2=U|OKod+sIKW$nB6{n8ia(-Q*YRhPx zSVO=lC5G{wrvM?4t{dt~RWQ&FC_>7WS>f^t{{(#%V0>c|Ni;`3P)wblckIiEgc-Oy z`PkWfS(1+DxkLF_(g}FnwYHZX#W%U7w^3mSUc0X z8u8au)uu|HUC4y<3qs>R8OLFE{Q+d(Gw>|ommyw9cb0^ADDe_k&B#dBR~6*A5yzLk zM)+gj(*C+_Lyu!B8jX`PkHZ(^KHi9m!A6nCmJ^-q@WovuXHpZwV2O~CvlfY{Pi&1A^ zhc{n1&syaceiWO$yd;F=OfQ`J;IA0nRKuM?ebSzzaqRC*k&_cufw!haO+iGXe#NU^ zj37{TbQw;{PfJTAz1NjMk?E5GpCaW=IS;}V>L;HqdCqgTGC0lS8H&lpyEsZ|1AL&l zngAi;QVqh->PB8A3IjdPv$Xx8vQ1!Y?EJMe>swp4rAF z3pNcnzDD;C)w%W+4Bp-!d`km)QnZL$fBgR^!uumL11tWU4Xx)-m~=}6<}XKT4f`{= zs!ju@Mb%DzL3xg#D#T(_`Kk$Tv$d-@cGGERzWXctZQXFlZh`-yr3Ls8dg+A8OF1Z# zkq*zoD@;>rH?O*6kIwXQd~&^@*AS?3-?~tweqD^J)2Oe!sJJ_{M2_d$vy4PW7jCIB zt_gu-zGAjzj=+B*i)5Rqschq_r*h-Yv3hB?r(~H~Q=BAd>?Tlwb2pL&ECqrG?mIXM znw3tlITFkf3>oX}1;*|Y_!ZFT+1`bk()2f_){8QEy*nfUGcbWTAEG1=r4$J9_6a|tb zVp&b>*Oi2xw0}UDcmBTjj&1o&OZ=>K7jRcrPYtEZhv_ z=U!=5EE?Ux!pSZ@YF}XY%d%(W2eQq2*E3>)L4$WsOrf9OLE*XGJ*@ zI{F<99b|#l^?|bOIGlZQbY@E)%_)1yx-&7>D*{|Ek*YQDG`sE+ByOCpk4L{;F*nXlJODI7n>I9CFsrqk$LpY{+wc7DU&mo0KA< zliltQC4Zm5g;pSgU!){t;0I`S58s+_9?IBJ9YcB|J79dKXT_hRu&w`IgJt{}nl1dJ z_|xr1J~8qww+9Ib9$YHJb;H@PXk$nYiy@n8TCrIxWHq!Kk(2drx z)d>l{JMW#GH%ms@>m6FOC-h)(z5eIt$RsaGvV)h86uGwcglWeo7GD1iMhfBrRD{#> z1*N-D{T}a%k-f&CiRO(@cfK+;0txq`l4z|MaS6?YBEP2(5n5W|K3Wc|c*ZW3n2gP0 zHayTAsLG!LO%IT`h2R3Px+8D6M-2_-03?k12`dX1EZNQBo*!@OoX7QQlE$XCb)5nt z7V3cTLFVC_TB&`#q{F zZyEtAz7QAk&im0+#vpVduL4&B{G*O&d)qoTDwjLi-31hJl>PwX^$VzusP$ZdL2!n4 z)xqp5qfXzBSJ{!}0o0ig(5^mBq7r-kSe?etkotQbLj~=J?+;df4<~L;|Br<2M`s4s zp8P+vGHCuE9j##kgR5P}iuUD*n38lBZKM^)d5n@QaAl;ui2f#l#-77*&0)2j52Mga ze?5VU2_Tt%4mnGmIsXLRH?EaKIW<-Svm)L%HLL`^Clb>;pY&)}*_(+^;tKN-q4-v+ zqTV@?r?4^CoxRpDv79Yc}t(O98f@+~^1{7!5V#O!4z z-*G7-Vrkw)%cJu04OjQ_!qmcNrVN)@KiG3;7Go5iAvKHq>+O?I)rd%@!25{;v1;&p zB0%Hv=}pCiDCe4@7cqccWS3=j#U&`YJ-N42Xr|lHjw<1=b9X{J@@A}m6%O^}lhq-7 z3+U1%IoEN0;0c6!oiM$=bhJue2PW3LSgv`mj(21~yG?7O-Tc-3^GlwX+0lbv zT#q7DjxO0JcUZ-Bxk$R8K~>Rd^sgR=>@Zz@8XA690l^c{M*bvPMG?9ACDGw5vljtF z0kUYisr_oPr^`c1MEWhn$`iexjRvQ4?Qv^@{^~}OVv|nm3N?kpYy0OIe+SOgFvbKu zH$yneSeMJZRGI} z*UeR$Y7k@e%J>P>)e<~j*%9WdyEM>>$i$hvzj=@5Y$m_c$m9sch%YW2O% z*&)OW(8thG3MD+8jY;cY2q-ykwT3@A>EFP9F}DDMK#9E6QfxIc*v555g8El`rZbRR z^TAVBMRa%A36sx*NKZgeN73>04`&Jn1ArfEV%VeMj?rUA<;3vAROfTn8G$(v;E;Ms z)u_~taVv1>7GO(R^3ZJQR~Dq<(VoLpl&`i2hblo^3Q#zJtS>a*2EIQcK|p2Ai_ zlHHUh)Wa<7H1))EB4E3&&ksQS9}4jmv7obTza($&tA=PC!|QQya_RX%sQxEfHMDc# zfW&&qQU@#oq~7tt6J@DUg+_ZL4|B@ub!^?MAxYivYf0IP?;F?Eg>FoyorNvkw47I( za7-j-QaS&ng04}{eC}r#5Ylu_BOWj&V<)^$S=NdU^0AGJr+@ObK7XT;$h04{yFTfW zT95_4&ylcnM?K3)RaIAr4{@voU=?(1sAnZ%p?adNtr&|r@OA-mAt``fCky1*7ZR>l zo*GLVzz4cNBQGV?UNn@y#qV&5_+%r)O``{)jmtTZQO+q-Ol62M=2!Pj5BIG*4B6eb zJFg`l+oUd z^4+iSw{ZR#H96LxpEGp#t2w;AlqNio0M79gkr&KYF? z0$l-Uq~My(K|WAxXx(7hEC=lXP|ULu%jH+Ckit$1NgM=DD}o$i3h5r76h^^ahaSM`0! zS+-C(7gsuXA^1Oio`+YCA}yogEt#3J{?sOjK;Xbugp-xg{&iz~E@~E2Gn_7D&)pf` z;p6*CVF#YPH!N1vwV+)2DnI6W-RI7nlAZbOUrphD#V;`2xoA$(-kAMH>@8l%1M*QZ zqMEk_zNji>w2)%y^qd;(c9Hp=#^4Ug(nn@d-`P}cppUFDJ@9S z6elj|GMZb?8LSAWO84Pn+3Z!G!7mr#7}q_=xw!Wl{dc8+e1Zr7H}Un!=NDaU%Lv*U zDGyu<-XL6;2}Lh>11vy0PB(&rpo4BDT~J||n3HKQ^j-#%g>0(Nm~V@>92|tV`ERb3 z(9oPs2oRgp{QE=r52^YNc-ivEH4$s%K2X|57xVLr>B^gZ2}D|0V=m~aX#8oX*~;47 zw2;8ii7wAR&~)rDM3sl2i5$Z}QB7eYjnB_mXKMmE0daFL?Y0c9apT`bUNSq4J>I&z z!cK9SHU3ZeSZb7Pb>wZQeTX~u#~(XVyKUU1RXaHm{wmW*IaR|XFn|6PjjyW$1#dXg z#vqybNa57Z@u5LuRTzw2&>XUppzC6vhoba_a2`gXD#aiWXfisq8L;HyZGAHxKb$Z< z1^dAC)mpQP#o=){B6Ntbn8mUGE3!U@@c0I98#&LLQfXRaiCj6nNnS@%pM1d)j~dnnZE z*DrtNT0LVa9V>(rOT={yIG?Fio-b2QhR_^yIFZHpAudpR=?ahtH;d=C3A_tb)d+Vw zjVi!n6h_F}P_KTHU|>J+lHqy~8zv)Dsx}3^yHCZ5<-`fwr-bE2v+1x=SW(S_I);;& zUyN&1Rn$nQK)7hyba~;$e3Km=+b~l%p(3}%$>C8$LFXy!Cr$QB=@YqGGo*mYCyJIl z65sT7IWYWoIWfY(sXG->JvP+gKnjam0#EJ?D(j1=`mlomX1zRiBca7Ug!Njtr$ooR z^maqTL8SPdvVdGi9f8oqs=Dukj{ZjtD4&Gbm2E@VBDHBiSd}q+*;OF}HIw1v-5AQ`@XP+>|jzVi~pb%#;BDPndoL<|thAr9H*x97Tkh^jD?leN*3& z)y_7|>ooCRdCXv@srx^L%yG3v!e%Q=zteL^jCQO?jk%&U+MC<;&-{bwWLOj<{dfeA zH)5vPz%{nv$7-78oOK^}080jRlr8!>P(#@dj20 zVw!1R@(BYIyHARiDN59!kIw@q;^B=h?UeE^_lrs~*_JB=;* z22eTGo1QPkokdP$tloe9XA+`-oa9e(l&gP}UqI#C@(DVMxVB~8VS12eZEFtB%tS#Z zlQf5q?(S?2>FZ`f1%oe@nDSvn?)dl^RT!TU*pGewsA^JLSK$i94tvav%a5%#30qgB zNJsctM`lju1dw)l%p6cGOQ`coJZ6x|kzx2pbadMWgUmCRMZ+AdE~sj57Y@OM+B_+Y z8S>u4qQoc8?`go!hLCSHr}T}Kg5X!nr-FZlQ#?W+w$Z9%1`PGJcWoD+@k&FJaVq~= zDRGuLj(={P%Vt`V7Q!kQuNWPvJFv)zN;Q-I%8|F=9muO$#a-LhrF7ZG*6z+ywVy6% zb5~dLdL4&+Aq`cKr^o#JXRj$Tmgn)1{sKNzYe4YRir8Z_CS?rf3PhnccM1LCL(~V* z8hJf~Yj|+jje}I__a0-+LCI{ zxE!jTa4w@i2x=BSE2R6OeV)@yI#p&c3}&UKtef6=T;3V!5s3Bi_Exm{6{fVAj^>eQ z2_ED3mw{&Yo-lC&pJ-oDp2bfxD#qc-HZL8O5-eZqArd(CO%kG93SaN8iWZ8Z^Og?`#eN-jdc3R)ALI`dMa1i4Kt~^^7o&R4$nenLYu2# z3s|5RGv>cZSTHl^;KEEW%Hf?Mz^iWfX`yiXjxROgE&MPVDa8R&Oe~=)Le0TwP)$X} zFN$0X17Zp}-Ki=IwGE972wkBCzO?Vbow2d&3yWdsC&Lv-Tw0w>yT_h1yQ`^bY3tn0 z;DWn?r{=&dFu>YbTkBvroSR~(W)LGg?V>fXR5s*abH1>M^r54L-x7SNWx77Vs}+ok zwe&`QvXts}q0Is8i;OLlx`(M!A<}2?g_Y=<4R``P*?Now@2LjWX;*j7<n$>rx`!As^)!%v!1xQhd&uIwLS{h)_t+*EgsH1&7HESJoamb`JE-bU;LIZvMbaT z!BdRjiS(bRzAH>BP`S3_JtUtS9jUmutJ5(uqS7s{Mgx@CG9A&S$*~XN5%+Ciwzfa5 zivNl1_qa}(L&Oc7eeTMg(G9hRGe?&RYhThoVLGj3$=GW(0^V?#-(5l0kdC1U^Ag|j zn$Ixn?ueJK5ZwVl*@uXzoF0C{8tw>hK}X!>?TgfLQgaoK2GAVTfZ^kf14g+qJP@72 zihP5>Xn8IZXqx+{%Z#M-9@fzrPoW+hhpRkm((B;2mZM7muqRseBYP}ikLI@ZRD-#J zM;OFBH8P<6nF9Y!t1^_uH0bwLN!EW6iF-lON{#&FN`KTu1w1Ka$e!PtNw$nuS-Gz$ zkS~Od|EpFEczQ+DAYR2|c)aemiOX4labYOOE2E%a?SKFnlMkA1`Y-J%{NIi2wv+Lh z$<@8X{2lehpYdPUEigwm=CY?lX%1!h*aD-)$y-gR0>C&3x!7@T;d}qmD|*W#Rjz4Y zAZnPkzU6dK$T0b|>I^`)#ZjxR`EfVVaP=c*!_%J*IiP|21I}*hVDGtI$sCi^82^Pd z&U5-ck>yFW0Mo!Hb+6#5qnLY z6S|DXY}OB~NC)NVDmy=ahLvI+-SRHa7{9aF6&w8KY3S=N2V&ycx&F^HNET}v@?mL# z{amI-g;WLVGnhq%v`WSeR9cq@=%<;KM|wCGN;#VVHjnvzJ8r)K{WIJn<4^rspW}QU zt$1_B^ho6+d?eqn2snp{V!q6t_3G0AL3V9`l0hG>sk9+)z}QC$D_+fBm7FQ?MHed> z(DqG@0OUlKPnbS*Z92~$nSD_QL2SSSyNa4IM&jdi*sg zNk>Aga*8*cwHa$2uBikt)s)S@vlJ=(T7)G)WW(bE78L8?Te?{w?S1Fvs2@onG73+R z(ikIL`~rX_8pBCA6&eJD-DmgKPFCdS!F`(>GXk8)ZNF9pQ;WMtmhoiY z#@)TpCcB8IVmWdtdAJ|$d^{eGYE+uM|S9l70@y55lvS)!p6V!-wAEITtIjHXdZ;;o^9L4aYkTwJ={&!zzE zkGPhqv3}8ki{}^DzJOMt42Ou0YA1%Uuo%PrrTSOHas|PcXkIV5+i?8O1?_*%I;kll zR{cut;aOb;&_5vVvk$-v0gUlYV?hIhF_tm>C5#qa`pUtwCN27L0RM0nU)%2#hDD=G zzWo|G)s^O;FrPkTH3yG(Nff-Rx@`?-&AE9qb4vBrY0u%2H@m&23V+Rz&;{h7XyTZ@ zflDnAklO5odzvI`N|?9iGd^&94*guGncfeb+o|Ja4Gpk2L4D7QlW@>81!maQ^31XR zQ8){hfGB@!_RPMD;MfO2Qgb@BjAPRwnZ2i#Aj2EP2G^%IE!X8U8vebu`k z-W4%6<^yV#E%o*EQrm6a1JleoqmcpQPuav}_#p?4EX$=Rg^AcC9-8x_5JaM-=nr$X4hbUyWa#*kOsPm&*O-k>kqu8tRqfe7sG zUT&7$R}8zcGeQmUc$8;}oEUEguZ9?6ewgwn5}pc0cN+?neJCsG7Qwa<9q!g%w0b8& zbg#)yke?=a9-dq21J>URcc`cY2ghGa1%r}q|2W{$KnN}pT1^zFcI^# zK5SqWPB=ck9Py--I)Kz+w{`B84tFi{i6GGbEdOedYHlNQ(`W0JsTq+#shRT#;>0_- zqP7kQ9j)UuK@Oqct9Jhr1)ss0$@RTMlN4b=uY?dhh$bD5F;M9IO~`7$;zCvB!@-)t z?pAfB+Q6Di&c;L8m)4#29uk1fFUAhfvNHVF-#q!1@;$)$Fm$arJhy{g<0#FW8Vxg% zR1^%U1K9hOv*Hq`Cbf`2cPT|Xx^?$SqUFv0Y`I)!bb2i`#Si_}%#fV)UjJWwEKih*{@sNq(8pg6DS zXRZ=n71AqazA!e5%SYc;8dD^&h(t%klRA}v3A^v?@ER=;7)eHa{MW(C__C2Jfh4_R z7vc(N^Bz8_Zax~VD@SLw|Ksw28x-HvUSIvEj;bTG;Jbb>Uno%oy|}=sTQfR5A}(I` ztR0dQoqF9hRaxB4_7OIzaO(y^FPW$D`7tpS`?|QKG_#;i_(LhZ;l}hC5qoZ$r%I1&0i~OD9BumDYlet`h$Cfn)+#IT<2C|V>WeQzK-`dkF?s- zG`8Cn&|8n@smG2@L@Wv-TMg|M4d`0`rzs2KMU{-|8wV*K1ZPxal>BktkNoJK^~4~h z0`K#r-8lJ&jroB~&QXPF(2|T)1UOQ=(SgjLCYQ*2K~MCdG;0$vKUO{K5d2hAO%dUO zSp#L=-=3~h2S)2iIXPR2OYx_Lw8(>}YJ4b^cUjGZ{mRXoW{>cFw*#mqm0QYOtzlrF z)(Wr3g(*_a!DJ$+UfW6KjBVS-9@^c27-L8E3Ax3cnI=my;jAy}Hhhh6?6Ykl8YcgV z=Q;{of7H?L^okfcei$PK0spmh2hR$C|Amq0ZTunlGj_;g-G@;RLw4t-HA>b*x%R`l z7^;HLO$sl>5g$G7Xk8BP3A>qb)C6Xp0P-xjZ$R3UmldN;rk7jyvuO!AM9n*BM{P2M zT1Ir_?Y4HgC%RX5(>jcEN>Ml&Rdaz45w?7YFvf9>4D-|p(-~@#we*DVsyK@0(N5&R z6i|NJl*Iqjq7M2P4xi%Ha?}bb^a=R^Gft{RI03uY<_n1gLwP$f9d{P_L!s_$dg z?k{yyF5ohZUio>yF=wG$W-pmi)9B?VOsOS8b)Y(fEqhY((&3y%GW(WN?i%&t(&)k!JO z4-rlG2;(XZ+Ffdu-2cjWcbQ-d93R-^ROGPho2Mf(l1zLy-g*Gjys^B+#$7B)3LXdb z(Z4|yFp{Ew__C^LGkVKVz$OJE?NOJ%+i4)}JLLECy2hncF))kn!@81u{QlhHXwxy@ zm&sM5>Urg>=**<-ON?m@i^6oM_GD7M|3a1h6ycA<;wLgCKZibcz~B^!xpEy<1();i}PtXa~5htSW1)@twzU1%A>tHdp?z zKfqRgKDcSkNk{GLs=El%N@?b0GP~eC`HGrr$elSEi=QO~o}DVo_~kq*Z|ihv4u}DS z5Tu;9Tx#|iQ>jO*BulQ(k75&d2grCrPa%0VK3Qv3M^&KCR*g^gk6m;$ADe;v<$A$` zNhGL&d~@9VK%@il9ZLTK-l|q6$j-p!Ks%Bl1g=zL21F=#Xh>V>D_SEDtEZ|;dVSm6 z`>SWAj8A2j1OFv)2&YwYen)>p+gnQ9+r?P>)e->y38TXpB(Y3vw}0W*H zoK6suR(&fJ75phMyn(yYEc>^~Z{BAi6K0t~g7tVn#tZl*`_xX%$|42A!h??@2t$m$ zfx=;g<(T!Has;vo>IQy6 zw-IH5O{xx7+28FT#tZ{PCz=S0Y0TvAu-kRyk-I`BFLpa>BQTV-Q~cqu%%UT! zolrK@u}$!*3M9)s``UE2N*1jq(A_&Qc~CrD8g)L1w>C45KB9jJdSQ;lQ{Rb{#mWa@7b$dkD@F>#slBY0e1heuRP{x``Y53|`nN&<<8qjVZ2^{#xU5_(DC z;ZB!cpOKlO2Jw|@M5`PaoHc;#&BxR$$=;fh{-u18nd*okgDmQO8MgHI37ZOwliQOa z^W9$F;hc{)!sjdgFW%lX9LhG18+PBNMdB`GHx;rcyM(zV$=1Z!!(pJH=|Nr0rw}?UK zChxwCFFpA8Ir`xGh62`_p8+NPI=#bA=-tx63AAO@!^CbBH~{%;8DxSQtlG#JPONREWCzW zar!&j*{$3{aV&!Gcc!BU$3+ajGry!T^45($`^1=#ZcQ zZ`vlOX1lES4vRWQ!5-g3zAX1WGHmqXo6uXoAFK-r6Gw-7Z;Qv~&E_Xuu8CGJGks@$ zcH@dFCC1wSywCU@ScYy;uMEcKh?tCT2>s;?t5}RDD&)Qo9f{SCdTS|AmlGYA@!G;o zX$-E%G5;{t%_Aaih*qR*70(3`O=>f9gv5rw?694^w`F?Kza+0?z+IU)$^GlcG)k(W;mb}p8)3Ma zRbtmro76E|F`WOuLLHRs=C4|o(!IwC-Q7&f-<5qRm(4?83dHy!-Di76V$61zd|Kxc z6k=|G5R;SBQx8eZ=dYDjqh(9Az*Gr)@#}*YL)t2*Sm87BR!wFzr5!sSkiLg zo_5D~SXXomii=l*w!6^&!@y-Waf-hy4WHq&z5KqG0LdVc4CBVaDvd-%oH!1>N@Z4{ zpFUW__P1tHTa#`30LfZfU@6Jpp?bUndxr@ll;o*xSG3DLr>RNv}eV1>2z=hK21`$o9PMd5^uEYtbnosDbbD zJuDxyO;4GbN1f!lSbf1vp7+tH9w(%2xxR=Ai2M!rkv(8k(#Z4<^>FYtaL%@ z1|ucRLk*XL>|}*AN(b##6LplVEZdateTR!ngmLtg)lhi}tZi$U*+Cz3UpiE2cdAup zc{yN9yN0+Bbe!mWMso)|?r4C8P?An1sm=vqcmm zdjr6kQk3FzJLULZMrV>2nyA$6L}P_zsM{phW64#KETl@MMn3w{PIoFCkPgxyXFZC0BHXE^38ig4GIEF4%By%AGUB;YI_JHhF}RB@ zA8g#JIXN>fW>_pks1isiTD%){zcpqv* zH)+3-D9#YibyLX355Tdp6X_qI&L(O>{lEEhG65;?U4-X$a7kA?y8AVx^CBM@ z*xQf`($(B7vzqd-{QJRK(%vqueeP0|mS<-d^2+J2^1hq+a0sAlMD?mYwur9 z#7ooUdsNIx44zi)t-d+W*1@4!WHY24lqj>Ay{93m00o4Jc!*1IrQG@6?$f|hi^DF(-OF$;VdxoYsbFLy4 zyBEIuBQ4HVCt%Vt+W#XwDa9B)OKmi(2Ttw&TN7N0t!ms9IJ$U3O%2kn%+skjX^@mn z59}66q3MjA|Mo8TtZc;2{v4_&{9&P%_ai&7mI1Hrv`)lF%3zC)(%Z5Qt6{4J?}u5p zD)-W}-e~ix0me*d6`yLBNGy~e=8)2ABLAT+0Z<|0_g7p~VE!-J)Ce@9yB9c5ZhzcM zfDe|bSQscoMm)H{C-68Ony{#G+T(f^$i@;}Ep6$h>X;ExvtU1|;hySMRZEQ;woDg; zNhBUAI?{%dKJMUtW<)#HeSRB0uViky+WRw~KYfRJp^J?EX^Hh`C_>ofousS81V2ic zn*)cd(DBFHB3i$aLU+l@Bu-b-iL(6h-2lsWxDi4R&ZV1wB#RE6`Zm(H)Q+H|3-N$f zV!%xkBP!C|%$aZF3Opq4Fo`SR2H?p!D=&vV6&2I^o)8uOv{t}Fs7O6^&e(-YsKb}h zSH`x9U+;A>YwdAZaTA#S0-c){rf-~VuzxsDsrwp&g;HB8PHW8=SxNFir$TF+-cTu( z9v`Tt6{m!gI?NO?UW_4CO@`l0?@(m9_AiK+9RnxY*XFzKpp7--p%*M7Fw z?HuHO@y>(rhchGh=#t+%FB#M&zP2eyaGZ=WJR=j)vw41}s zVdryB&b+g}kBbfFOx4p8MjiVas586rNm>YH_b|)RIAEyKC)poQr9Z@Qqz>z++*-vp z2mAdWOavR6>SNwzqUfWa{#qJ_(+yW`iBwBb&R__?*4a|nCOl+6T*7~u?{;Se=-EaV z6LdOsf7EEiioZBc3r9zGux+o+bwj6D(O-Z1B6(RdRlRp%m=bFHkeyK24&SF#MFTtI zZ0mQ$0eAf`yur~Qs2c@dF=XlK@uP$}LCx~FOg{S8P4Rr=?gIBJcFiO?1l)8<72jPZ z@u^N$P0kHjx%1nsQ=8j7IS+fHZ{DZWGmA2Wb)Wq%&to0;YBoj@j>Q#~whD#yidtHX z81NdYRvKPHOQ8B?nObRA2Q*(Vz6}kSy$QV>eIVbyvWUkWHYHlb95;}Rl-fEmms?s` z)@cpbhuOjP7{(kBRo*L+h3eC!SyHqjpG|g~#yB#~5Pp!eClV6uB3Y`K5lW%;^|9KP z5{p%u&feD~m?o~ux{J4insKIbZZQRaT79^F1T)VVvb=+w15;= zJe!XO5<3J>h0d18**Rmp@Ue>HiJHsImfRak_Q;Z_f6X6bJF<_-iFfgcpzXCk41_Nr zUs}0Ev1)Gx+2pf+U9W0EYDA-X(mO2IUQ1Cp2s?KynE0_a!+gdP%`kaJjuT$`QCuiI z#@s;c$%8&??JS+n{c0=g^$A0Y{MS$>5mesus#g{~+Xk&>0wKY$3R`KJfFCQJdC34g zbxZBMwNh@C>uQV%XxEAQuJ%pKTkWhI&!GE}A;ahPCE6Qh+aov9(}sHO((w81)Ck@? zU=R9x$2L69{-yXt+#j6C9Pab8!#h}7z)l( z{29M-aob3k;3wcUgUAWrwXl8>?vD$faKFSO{wAUN3^>@>&D7(x;v#g8Z-sAGX3AZi zcthA^XK;f!FS!|ve*=zLpHB}HPLAgQY+;)g#Y)S||Ko)E6{W z-IxRU;fpz0|ColHF4XrA+h=qgbByRMh(p~l57QQd`nR=)Kd4Po8Zqwba&Q+F;Y+Vc z&-SZa@hVvf2K>W@`1+kEA-ptN@K%)pzEw#bTukneh z8QCSp%1df#jL$2p7^oY~7;7FJgYoMxMaOSe2kj2MnTXZj(9ZEDe2lH$A5a|M4xNwq z`fn@Q%4wS00?g4rQ5hpVt@@k+iy>bvf0ST2FC9N7qZA>sM6n|#xL1CP!j*(W_~SQN z-@Q`X`P4*V6GrQ&@o}}yzwivr?UkJ}uTyskBuQ;($M7GvOv;(<6|i}~LAHDMu0PAH z4YBf=jtP071q7F>eAqTOdKZTvzGyZ)Vv3IHu%IyzK8lpMPU2i4G*K%&w$As1!+M)- zCuD|H^m`|r_H^y>u|@ft3&D|bK8xk6^ID$}^W2Q?xlO;uZw&SIk`8IQPf_i}hrNpH zjb#S9+pCie`&$X`Blg5N-jOSn2JvHt#>lSPd439HrY1dgW(vBE-#FDAfOK1Wp&2$h z`v9W#7E&9N8#TETI<@|H$CGGo@{z++EJAg8hM%H;z~`eR^qyz2;vFtStV8ou>Hj$w zY9w$(C2vPAgI?)>rmrB@B^Zq(`7GXbcGiWUcIQL*L8PhBb)Vq_(I<^db#!n3eVzR| zmh~GbV34KeLK-031Q-oW{R<4gnvOh{+A^GdyKSzY=s+}C)2T5;750dBp-vf?FwTkW ziD@WEn8j2~JS)h&Ak;UipLoGQLRnr-ciUxv7ah_hOR`ROfJ+*vnD+g(^yOK7;s*Lils_-r?SVoEY>Bd!o9+UeDUBy*F@qbK@Khqm8hvkX51 z)8f{GzqsY-YqPzsFmDnTsu?1Pn8FQ99E)|Ran zGF3HRhOD_AWVoD9(aq&{9-C&b6&Yj{;y{L1?O_|sOwVjC$M_}V)AOoxM@60PF=J4f zg+a4TW2qJ1+Sue|FYkD&*+VQ*v;hX!zssr0(_Nq2V>ydN z`BI)T>%B}ZgMyR3Zv#`*x|l}x^6d!^4fw+rw_K8l zi+-O|g`zr&shd6z?6aH>at2k?*CMD#Y#8x{rRDG-^7E^uEo7sQGyuKr#J5A|?!FL< z!5vM%x@_?3ixphw_!ud*(|Lub?Kxp0JuPs^{oz(W_&i(NM7C(Gmu~IW>?%=R;uScr z^tYPvnzQBu=r?;#suo6k-n$C6V-(id%Ew{%yG0H`24*Iv`#!O%L}(Y2&6S;)h?V61 zhpfH55H&8I(Fsh3il%3=Bmdw2y4uD5*XPJCA&$+huRss#;vw8 zbEKv|X7=KRvK@oF2Q5hLJ%OK1l2^Z3{tJ$*s&+#_nRm(To}-l5-6EOw^4XjkF~bvA&_Q!xGd|oa_*N09r5VUGV#9prM&_OJpcxCcd>gt-o<%$|H)mYu zAgESa(Mq);^DSEU=Td)0KaJLM{hGvrENY>3FH~;L6jiEH4;@=g>?&H&++1Qgh5(+Z zFK<}N!;{>JPc7YjwXJF_<}aX>R^u7(73)*fNAgx+?oh482Ev%0X~ZgOUK5C9VvSdx zoyX%@GNK9^Q*&_cgzmxKB}^k~^E}pnzGNkUik$r$cGQ*#dXj71^OPr6!hM#UXZ9gK z45{JQ2Sm`9KcOKF+n1_LwJq&lCrFwd8D0qK73}f6V)?;*hf7Y5IbYC;Oc}f%->%?r zrA=eSJv+Yb z_!?FH58F@6jg#By{~$jXz3+^C`%|2bK}$p#BI^ibCSrd1XopLM(y-;@O;W|@WwD-d zs9codg34W)#e2 zm~`WnOdyR@e=)~+l6IZ>;#; zNOS?R4TqliAri$fW5%f7B64E8^S&(K3zphho%riBC|3|srQ}HUn7kjo|lhH`<)&bc5Tx$^ z%2hrs{v6v~?u|T{+F8ZcY5h;vS>Ox%zaL4X;w;|r8`TklD~{!gn%Zm2bz zOsJ6emROFD0TiW!j;trC-9>95|L4I}LH_Sx%DpyiAd!WQfeL%AHqkJehqbY??r|Yr za!NxDYvm_M1MBS_HBL8iB5s{V2mjdPa(Iigx@%J8--O(+^OV@fa94j2!77sZa?5Y6 z9y{PZ*`FT-s!i8?E-#8EBi+~ZV}sC7^wo+}Nw{Kr#LVzsdh!5=W?r_iBLZgQ5Jhga zK?v#SvAY%(*$$31j4CJL(sKWUS~$0UM;AY^EnXJ^r2f53Ve>{Anb{&1ME_ji`$U^! zWL;`>`uiDptJR|+-5804|!1+>GA_~*k90fX+hRjxH`1!vvQLyG-Pq*|#(XkujJ zv=dBuzIf*6jps{#(q&lCSSz&-cua~{L72;bzWPI2nO8o&d|?Fb@RXPvh|b#CmM~w( znWnP95j^#*)5d&yoS$*SP&HWfQ*6$I2W`G{lwq(-CBsgi4w>$B@v0UKw-1$yt8KAs zQcJx}F@b?`quA8_q15xd+M1SwgCps^(Ah@QZFVgfSH9t^M50DU8>UHwZ|}6irN_c% z3*S9d&W@VJF;gAUIJ&oe_}i$s6SBl72PL>TX-3plS&g}3zUhw@0W2{H_O6c^1YjDT zMKl3jvapq!?ri(|L2i3@oXqtrcAUC!enxm$DK2kPRbZ+X3wfQxUGqM}&Ux!M;KR3y zieB3~pSs7UWjm_Ynk&L(Bla)nP_hNg=-uv6*zTnEH6)*Q3VcDLR1oqjTigzlKat{A z%Gy2wjit&|Bfpl&%6Rsh80alvyz+n%Jf&SEYAt1cXl`v~C&JOKS2YZHSAV;1+^}*b zz&S6U@I^{(m-tv)5Vpz3y|vkZ&)vG6R^Ra+5FRo@k&pTz6W8>M+1yV#jJ|69JcCt! z^fUkyTR??bcq5+;yDHmi$^{Okr5h`tFr(-&tQDe4645 zjHqLnpUKCjSewpDd(_sWye)`Ez;01B*dMq9cmvbji{|;ht zusm^%LcLt+eH+G_cctDD2nF;m|APyt!Wi<=y;K|IX_llpjNwXJDxv7Bx%DBliEMOw^fcPUDB<-YKZvvEKv@z&nx_7&7*?Fw-22k4(&(4=>egI z1)t~cGnVPe)Oq~D`t6T-q(kB?gDEo{m38;XEATNSI207;2(33D_t3(FmvQK zWQreOcKy%gT`qIu!W%Yf`cQEAl1@c18a|RM5JX% zEI~CN+MtM5m#)ddh#iMPbNl!+dj^WW!A&lY)7AOIriotI*}fF_a)!R?AB>wXjm8-5 zdxo0uTQ3&NmfUUUQhH>!^6Wz$*R65Jh_G4;I4dWVBD+M|sxtULSlJ|SdeY>07>zk0 z-~ATWDf)LO+y=KgS(fI*7?6b~7%pUryIdPDu6OsSm8ua8kva9;}P7qv7= zjG^I~>;tf0<1qRkHX4+9WY83t7;w{`45BA#0RwBuW$Yv75^HV{62&Ap0tM3!?C=yJ zYX2v4YO3=O+i$Tf9P0tH`~BNzirr2hm_juLS<7>EdpoVq??Zn@7BkyF0Wt_T!x#Gd zaxs0!3rK0m)V4oteL5;+#uRt}6Mr=kREQl1rZyKo;xLy1LvARv!YWBKo1wHRx>Q zDDy0=n;{B}(SS|4jt|foaX8}CAmFQO0}?VGkv(=c)_*Olk|fib zJYD?683x_C`I~Qpn^E!vf2apC51is{w&~rZEEWR6iMB|?ZU?sPM#05e9@6B z^{lm*Y`Qq5>4^A_^`wQX>=@Z_hP8)D5-?cq_(Yc-59lXB#mcfBvYlf(X+7U8sa6-& zz7S^*<<4(6gGnM1RrWY-eDcmelfubDJ*nYb-=}WZsY1?S0a1g0(8-QxJs|Y$i>N?{ zm=Tw4A~GRXM909idd{cl-ZwIWVWM!rOKpn05ru5T_>Uz^#2HTja zN%o3v=)I3Bi#vRp*je7)YU(m_66&d%8d|VTlSmjT%LvX(I9uJuLy`U+sZ(z4CE^Y%T+0R|C@G4vB^CH4D-V1qo z9!?aEe;vETToBAOB>R%-fE-z2bSqMUL^w<#in!#I%>q4<3^eS;{3mzpLeEZ;D}{&y|TL}*+K!3WPQR}Gh2q07FR_p)pEo8PNb*Z-?_b%(aX@mpIhNX4y6 zxfi-_Zph0r;+Zg;p&Fzo;!nNsC=BH(G-D5~_PV2N8@9o|L&yX!*CbpCb|&WmVymHe zRas!gn^w)8649>9g+ol`poI1JX-!sUH>cZ~2ecASWUP0`Sy?+7u$5@G$ecXd_ZsLG zM$wS!1a4C{HrieauA$&tji^Ydw_Cb6^scor*Ni8YQ+G50AX#+jO?MwpYb`s^^7*-nl3E zltfA~6~a+*xK?sb*Uh2(j|9SMn_YaHQeH<8RMpZ4e_{F1MWqv=ha8x&UoBoPThvIT z4;(UKB;l_rnVxpbGWqLY<~w{vMYL!gLnpl5*`XoJKWq=Z_8IA8_9YmGub8^MR%DyJ zz|Xbvu&y?9;4!x4%KC}Cd^sASI;MEwtD4sLWa9hChC2iMFzf zMnQ5ysFK76ua$tJu1Li7xS~Z26dhsEa4T)@Qs#Ws%*isMPUa zQ#Vd&aPJcrX+fsr)BFyb{9W_4zr1xm_Ro2jN>kF)q0Yi@I2RkMspahIcQ?E!X~40l zo5xP$7l6h70yVCNpzpVVDj^#159rJES@fwlI}QQaq3huW<_t~RsUd3P>m~hz$M<|y z(t5k~@?HHpw|06>*hO^!S9@$f%HQ8(8%&1UzF6s7F`#W~5PEetJ*v$nqOhumBVJ69 zIuA}x79w-)cfdz_dBYEd)4z}dc&3+*TV6X-Wgp)|enornOQ12r+Pahr`)FIG2KWuS z)f1>K)-FYlg#WPdq!386o2yT{(xN#p;rH*Dgx2jzdk`{jj2!L?3WGG? z#g$~g1sOT8!~PMeabzzfpns5@N_#XFY-xo>N+=}Lq{gpuKA-y1xz)yy_V;eYHgqAo zcrE_0<-E`)E;j#!`T^Cp?4MZ{L2E60Q#bzd0nFb*#9{xSFG7zo-}}~G?C!#) zjqmOn>}rl~s_+oql}X;AA>ONy8AEEh-ei{jTb-NX`K0N187_^sIp)+PljuE~9CG1~ z_zY0>Kvz8t5;pc0Mj5y8bWo0$ix1{*ic^lyr<>jx-Ef*uEZ*i*RRzSdMU^b$6QxZ% zLmnEUr*E1t>C_0svx_;1U)h^dv5Js5SpC6F=Mx!CH1q*>7h;_`xjfDR1rUdQcszG& z#oF61l55OTQBfBUxNyqWJTYcy_}=yvmr{_oT}-J7>Vpr=U!p_~wFr1*I|M|MXha|9 z`Smy4YasU*6jG6w#C~rK{0&MSEVP^7mN+K3R?X*@ye|QUO`gv)uXtD18pDOrjqWzIF`8y+5@JF(gfM@Zk+X$al7hjX;FtK&TEy#d*0V;%?0y z1kaBjK|}w$oT&pnFRBxEcpM!194iWt)-Do8Q2AZ!T)UyhxO-rInU074ns~I}QciWN znHfVp2fG3F7W6KeiS+_T0gv~YWl^_3%ps@;%;WtgbV5Tj7g#kP!Nbr|ThJB0EayKL zczRqox>}}Qf`Ia#QM&sW+!u6YqU#zGDO0a}Hyo3bzupwcEN8!D?1e+}A}E8u2GiDF zfHwz4_C;Dn4o*-lVwiZQ_eyw#Xa<(YJZVxiJ+rkFotss~3;Ftxs?}NbJOCKnk|up+ zBO)blzQmVg`0qt2?nM0(sdUp^Vy?1cmd7GV6DoQ!tV~u-@L#%O<{kY-zpicdRmheC zbJ-!*7Q9*E1PF`lkfQrGPm_kj7%le2z`YKVp(yn!(dGkm#s84I0I~Wi>dIZ{I&u|Z zad&24h!^kRwBBX%CdHdW%i9x_osZ)>k;y~Wqh{$7NMEDpq2v( zk8>|gQ#-8m+Yneolkj%NbqMFwmMlp8sWIvPbc^jx^**@T;E@SA%4Z}Ayf*V~q(Dfm zR*7LYweU6uW9y7!UO*m8mEzq&ws({3bvLOIkmlL#VS|}nXq@rOeEKT|euW=27Lp&l zsQIPIFWmBga04D;M(jze* zvubt=dUmmPBeQj?*|7Wm@}ifgzCWhovJqGf2;^^`=)t$hhUjzm8KfiCy9vW?OM|O>IO+6yOvcw$Z(8>WU z_^2Mpc(r*nmh$#Keg}sWP+R&gwVO!S@`21<7sCYC>e_w6>7(fY~CS(?obNF1Fdgyl1 z25|?*iW2^O~nSpeTQRdidstmt;o%1@nk~`$i$HHJfoH7awm+=)(K> zc9uIMg*v-!WS*WNblgJ@bHu?Fy{PH=loff;Y3Az9M!qi}SZ+a&lX(>Q+|@k9d0_R7 zsjz)7$CNTUaocFRog2Ef(ilP7Qq(fJD{qBtR>8;N8B=xtG+RGiKC&O#aID~AYoW>j zzuqI!8UwXsECj_-Y88{o^QJ5o*tP1TazV^)kDE)%vx|hS)^to`BWJp#`tPEWqTC$& zpY|s_vU^z}FvXOsocHdv-kOcN0f9O}u(WXbEFr%BzemKsjxuP=3Wg}Wy+{RIR9ONV zcJAf*Y<-X*wMj-$LzrH9vZ)HgVgHR}1{Ne=P*`It@RkD3wb?l1~R$xAT@{G^$k zovIAIawA&MEL+ivyKQV0f!;z{l*U3(ucTMJDjT#8 z!w-d4jDGtBKqBi{zwbm2?KD|c8qift0RzAsvSDQY_}|(uFC~kQQy-b@(=3|2rKP#k zlOz5;6_iOxc{?oh`m2Ry2eD21EG7}qSI{T*_ETvTKo5(^nEt}?+EJAyD_vMx77N*_ zB8d^lo6e*(fRoFOiCx*78-yuvd#$LsTNwn|ihxw>!b_KM-VUYC)txDwBgj+uG8CUS ztp`GR`I$+qwhn~G56P;$FO%98+_TbG_64l950uNx+M2^f5EDvAbsSmUZC z6>cuIy)->8{5CrKqzxR#fJ0P+EiJlvhaO!A4hrs^$OW;4uW{|RV&X%VXSunrOB+NK zCt_1BejIAP-q|%o-L1fXolAbqeme5ByN4G3acAAZQ8>U~U^d5Wpvff@S)9l%X3&Rj zGhWRpRrG%SGITQG?oIFEw7P(+I60~T+h^L)lEf~?c8-m=Ht!FcDU2Ha;PJOh>iOKy zI^3kU4wZAfm0pq!7h^viFjN+h3xDU!EK$N-GJ$>)x;PQlJ96dyJ4x<~917plcL%tQ zWaRSFuk31uL+1n~%L?h3t5`-ACIdxgPN4j3;DZ2NEh00&HF%VOXC|J%9p;{BB%Wdf z*x`ex^PEM1l+lKmpSEfU7Z;vxwMgrnV3 zyR{w&5v2RqmrU?bD^uE4Rl@R(F~t%)opu|mW&glvTJ^C@ZRMK4&wpnqzOv@C3FJF?d%QBfl27kj&x;`TB<$KLg+@X9)A}EAcsRc=N~rr1(tA1{tGe1S^!vGUH_Ic0j6wMJe)iwmedqo*QIOI20uD2}GQlVOV2<(zIs*WZbZ7u- zJaoP7+zQ!7Pe<$#pBZz8b-~=k{Kx>4Q4hLCNd87X9lMkGvb>2x56^FE^1^l(G$jsL zEl7~&Kukno*PzYP2YRf?w?~lunjb&Z=l4D!xqsSXyyIRw-e5_4m(Iotk^c^h2<)6Y z*w{QE@2vEH{QBB+d%5BWyO!m>5HdwRQp~0LT$-@i)-~_whQ5mW;u1Btt^^>5M zUyzI78TF8gc?chXyKd1;fE{c6!~TBO#ITy>@L7^b&ic&whhoUg%6@fM;t4)Av7BZh zB-OOp^bK-Rcw5|;x;!)d@e`L;k&F&` zk=UfysHxq40hH>ik=;*7SoZJ^**%cq)9?QTLTZe$N!?y4k*+*kD$xfLnUj4O;sT+? z)9Eh%ShJZ^By^*pPI0T@58EE%Jga@;<y zU7JteDe9#X%1CpyU{kn!9aAlCs25*OD4$B_`Fy^Dw79Yo!h#+!;IsfR5UtvK1!wsw z))f_XE!3qUGHC$w7hzptxjJ@m(55dO9A@Q(tOdMJxHJ{Ty!d>6h~T=k%fl%AD9l_rx?znN$c}4 z+#D9R<2uMo*Ydl$y?SJ1)@ucy+uJ{C>3)T}a;TamH$xAapxF|ms`9B(-UN+$85YZJ zXQ10gWB+1?R;OEv=B{{%)tP2xIrMoS)6thCE|C+e;_&9z;q9M?&kO3b8H7G;vw?Wt z!3i{mV_qsJ!$+)<$8+0VWR|f?Fj#8m%X`s{i6|a0<6V(uzpQ`bPCIL3kB0Q=l!$+M z!N;Dv8@05sx;>Km>Xp0{ge+$LZ8^(4H}P;aTHbkp(vHA z$O+hCf<12`{t0D;Z2(-^GE&@Xa&QtXm4$T6r|TNY98_pP?uZzFoO8Swo3#r#*q&lV z+{jqN7{${NeumE)*ba~@(+-_x2_q!fI;JG@LX>PCkwFWfY}ss&Oy_&=#kOc`BA{n+<;UrZLXmVUj)EV|6R_UM1DkVK0YcxhTMn1KU7H|{cL0af?ByJc0!ykYfl)9 z70@R7N?<{B03{>O2EYmC04`f!#u-lv`k?n^2BO{t1QU#OA^fSCQVNll|8%P_(O*0H zUpu}z8pSj)lR7}20jFvELM}>@E;C!0c-09e*>tlQIDzbQAhns;Zt0(Y`+dzptOe`F zM%T*UhF@SV7WQ&p8vt#(KsL7>43!@*XLp=}m`(-f?nH?Gh5fC_SQY;Lw9ruJXJB~a zMxoy`DtbT4L})DyE;+r6gA@^7Mv(p7h>uOj$v z^w}qdi$q;h0F;yIk|ONEcDiM<*&j9$qR)8387)1FN2_h*(FNGP++bN$Vh;B*_J9Dh z-{XPk7&s^<_^OXNWK8FyVM!en1idpbAv^Di~f`FDb}AGV_bqkP9(nT zYwBOS3bV^O}QjW)O()a4Q9HHMGV!gds}xyIH5FksQ*CR zrh>1Pd`)`NYG}((EvzK8=8nOcQg*h=?=luj@YSd6k!;&|BT@HUe&`Q$_2@!Q_M;Tb zc1Oe7f)s7-ZC97#EcFA5;;f*(y-%bq7W{`PMG{Y>8NLL|=3V*<` zX?alWkDa;Em|m*aX3ZWL3a9O!30>~J?7Ov9?&hUhbJEd*_PX8Bb*9oPhtp=O=n>Tc ze2`J?V409jcr`;ybIBdTYYy?@V?Azh)(l;Tg@UJDuX8`Aq(`|LhpS6S%d3-j^i(z`^P~8u27a z-Jy$HbECO-LJKvm1#s%K<+AAynv>&cD3yjCG1G`)xEZ2WNl?CBe_$bi=z8aV$Ohm| zt!p3qQNzt(kMrlevzk((xloXJRVZcU)^A=L6wiKGUk;>hl#I`-u1TR%Gwscw&#{Wh zt7D80aXDyq`5d9}6*BP~?$@_B^V#GC?ArZ5Y)zJ93S)3{*4*?Twsgr+$cU}ptf~gi zErY)6b%-~`K>IwKBiq$kdIs9%8V6#Po6HJVor?OIMq=0%x|SDOv2K6e%tH(XsiOqJ z&6sU4wTLmaNNN^vo3WD>vDq?i`ZdksubYmRDJha&%tuLHW0pTiHiV4VFX9&lmC6(F z`^TZ{#BQe)3%G0PiW2e5e(g9)Nk>#63i7b6uJp>@r*LVg>oMgI&MRI})U=G(^sS;6 zAO+1UOSw-BL`1<0C?ul|cOv#5P9%VD6^+?RE-O{RLA#m}s9(;D^auVFT9x_S3NWUW z!ngNt5T?F6T59wrdbIk%cx6n~)*G~Os!J(@h}lyJST~6()93|UD9=Zkjl?r*u#GL&4L%Tv3mnvxvRGNA86E5)=05qoz z{W%y0_N=9U+i?5z6*f}n&c6AT3k8HPehw1X%I1E{E#>Eg3k29T z8R$5vV;>?j4SD-5+SEkFG+0-MSW6#&o4AtmPiCuCXt@=aCcabVt=B0CObc_%%_S6% zk2!Xli-osvKwG|h;-j&2ycG;pf@c=DtgbC$cyAS^K&4VN#AKh{)(IE<@^_180gjuG z^P^pZilBFdI=4sfYh1gta?RLbB;jdc*PJ&#Ruf*UR5Mi&s2LC@ zk$TyJi@nN~BLK1GR$*$B9*K&;t^ z#BAV7O5(h);!0suZr;F9hAnp;z98iz$t?KcdPM2)>`FBxEI!ezMCFIsC-@u6(6CGC z`F7Zw)&-Ed(_06|E4`kWuLB5bArR+2$qC&9AmnAcH?EOxU4>hFj?(rlcOwiwLYmErh5IJyeArrN)c zkAXp`g!Du}TBK_*5$PD+p@5_`NHYb6#}SiG8Qme}Xhek3qick;#E8)>p7;FTKVa9j z>s;`8Ym-askm_pqYshh;K_ z5eB*rI)nu#95CV907|m+h}^=yC%-d?6E_5SzmG3=VW7b6Y1LC8kYox5%mr`Ar~5HS z{g?hV+{CLAAkv~Xx@-U@1o>J&v5kKtX04L`HBp&cxk>7ooO$l!Yh=x4h@dTLGS1Vw z{Y$fG#IfVtb`3d9fl{{L-=}y7{M+{Ua0fsaQ?wcG6DhU_u4JWlO&p|oeJ95awWIPo z1&x*4cb@zA{%9%K$4i_($)PNYvTeu$qPk!|@Il;(NFiLR)Pnle`$EmmFCT^jgG{GC zCGs&{)BGbv=20at6AYlgAa_7p9LSZOUpIM-X3e;ZO8YE_t>b=8OurFbeiL1U-9}nx^l6xH6_bY0R zAo3T{L#{#U4aw@A(l&bUH8RDf>htZ?2hC$pLk>G&hEW}T=-2Y1veJ@bMOu6rEVvHP ze7RkOLZNCrRc1YN{H0tUC`VFidbWt|&QP0gFQ>mftxXvpg+}J)RRU{VYJ3H2`m3n; zf{SEhI<~^g?4n!BJQ|6mgv#hkqZ1%2nA8_Ov(HTkQpjktvl9@bR{KWHkI)W67>>!) zS@_?RP9ZbZO%`*&i}{{P;Al+p%ddS(Ok{xv2WKV|q8DU7;GaMEWu2EB)#J|(H}cmk zzg__nfR&!ACJM{BCmD$3gn%&*GPe*k>9tLl>rwG2$vBIas{u2v>XMNu1!^6uQ-5J= zY9omT(TL4yv%tKdNf#qU4ewQGj zyFr&9w|_>(e&UbMp@(%H!FrocVipZ1_3XH;9HlAK%LnXTeEnnvGKG4fAS!e1*jc%~ z6wgCq>R!7dC5J6P5GZZ$m`M+P6c52Bgw=mxPW|)%5A@XtqW|r2m5H2q^x$@{++cKN zB|I|~+Eh8{#DCP(a@)|oa17{B*Xse2>1NB$X$i4}U|UGqetu!5r$i24$C527QN`ya z({=8#?n4+s)m(_$t^01uRRvmMTds$Zh$~;^6--2I; zN*}rpoT}vGBgK_zm+k)k&FynIk`?(*fY0u9%xBu-2ZkR8t`|qh!GVKgZ4oWWRHf)& z457XTmib5U<=k*t8ithVxALtNJFXS+Yh}AWeX;+?QPVs53H!Cm#Jcj1me_8I2Kgk< zDPV%@8G*H=(yd1K6!g&Nm~-PrU8@Y_;%^)Z= zF~pLKp*RP!Q-dcV71os4(Nc~J zO$9xG>Py~`fq@AX7bfzoz@_bb%m3G@D8D>6s;&+w#da+$DGnqx3in18(bimb&Jmm5 z{C#sI7U(w@^Si%Qz-33!l?y$E;V&?)%q{q7vI+TkxwY_h!-)y{Cz<}D<;z+OFu6;O zo4eY>A#AS233qEj8<4@m@;;5L>|rZdseOr6it0;O7oUgjv7cfr6D4J)dpyeC6GLE_ zxB-mKYceN!g};s!DGq)({OG`uGm0`bRfC7{g-hel0A5fixvN*aTd`@SH)GgaMW9;k zV&qM3$yHRax=E&{XHyA+^$Rd+0Os;QF(@#wQkj)H!yKvD)d-0TtguJ6H(-r1F~fxh^l3rsO_iyoy}2weg^5M9}9Xz!g*`4JJj~?@15Rilk-?wT=4}D8@n1EPQj_J zV~Y!L+h>_IPy~Znor8dA)4UbUQiiB`tO7Wh+05y%JG&a7%Lu{2m9YKwZI`#l!4E}_ zYx~&(9*9P>qXgPq;D0NVw!S)U!QPH|fe1h&V_oCRIQXPUfv!%TnJxwQw}GK9|9 z_-kFaTi(0o!W@fP7dkpOFz4xkzLVlg3SsR2?``+aZYgt~(*dAd5qiDiX_Q=gc|p=S z*V%%XSY+uDvGb?*1dE+z{up)}vi${rc`~CVk)eI6-6UJ?Q)lqj6=k5Nn$D)kQGX9; zUV2TIZ9;{MGsFQ~Vf59yJes9m!I|rHGO13s{){MO69vth=L@)^7GRfepZA@}p#hSYmr@9HTsMFvnI40>8Kk1deRPSj4G${F{QflYjn*!u%#a*ajCs&C*y6qXjN?& z|4neWg7;84lFV6GewbyKU!EVdQFRoQcgzdyX-R?W=fyZ~zXdT@W_B(}y#0|RHb1A8 zBR#C9vD}w#E04@WgwaZcT%0hKGr3CZDrOOi(t+;q>w_xBj{wE#e-xYRq)z|1Pvw;Y z*BJU9lV6WU;$=C)_!4gK-m)o`|DR0d^VW08WG;SN!;gURv|~{;$SN5qNg#^sdrJ^( zYw#&_Xc2fS&>HI?dXbM9gy3pkjVp$68RZA(WPE3ukNtGf_W4zMo4+DVA!^9bbOJ^l z4>oyrmwyXM>H-?0=7ggDkhuV(jX-GyXH?vh$d5!@KqftM73jU4^_HcNU`w*cIl}piqnHad>=4B2f_~>! zinWq2yzFlatRRby)HWbsJff|L66*C}LmwT~_qz`_|2a+EnE{qUQ(qlSLHg0?O^%3;VuY+Y73_Ci1_n&mjgqQ4 zYH3MoJo2a45E7dLOg_tY$zw)_|5AjKNt2j}kO#SB++?Fh4jefKr7S6TPnNOe$l@;^d?QprR%Zo|kR{6oI6$M1mT( zk1Is6aypBN(^1UpWzxi)=`igDWyw_; zpt;XEny5_K{cmC!yU0qS!|y5|o|<=#h%hz7HVW_~83hjmr5Hi{JMJ8iKOx7?j>L1I zoz3<;9!R?682KUO8RA3)Xfw{gC84hGTGMjl+ubgS0JR;x(Lv+h0tc&5D;i##HQ(y1 z>t+<`*CN^ldWR%QXAwM`0a}bNBIpfVMB@1c#En=i%YB|9Rq}JZsZ7)RWKBhe0G*{x zv$|M%$Qm~h((Joj2^g!uW!u|RNvh)$X!D4^4k*S{nNjl{7FcNhRT8RSC!arx%O%9R zTkEK(8g}s*Ni-UzBq`HgLN9Aj@hbWwCFrp%uQ+h9r^Am;6ekS9xArU zHc9qg2Gyq2h|-AE@*L@+n$L#b(;DYS&x3LY4D61~h=_$QCBv`C!Bs+&n>Yt8FI=Y6 zN2?`FJqhaOU_>i-mo4@y1^%&@WQk70*_aGT5hOktJFF`f1y8O15m8$(G<@dtD+ipf zXSYd!@1=SK?YII@DQrrcRtVoi4zBN}Z|pFGL=)OL6X0ciYnKR-Ghak>6Gx-Bue$*3 zEwX{wVJ$J@IK!YTpt&P^q_3jIF6CZtu2I))j7GCdzB@9IvZpgnEHA3Qox#77_^_W& z;$c{;>drl9kvo0(6*vOB85VABAVR&KYF02_t)ik)brU#vUAp-V@&@3~#u9_~D^fFK z*l$W)%x7LVwtiWsrSr94D-mr1htFF?Xgf1L6rctRav6R9?9ST!_EYDZH4CJ`XmF6f zTe|y`xI+IK-dqVAh|pvZv1~?Q{)?k|Q87mG*pkSi9WPvFid6O9(rM1hy5u;w6XNalUi%T zl1IYtLemlh1!P=}7uvegB7kQdoS;nKS+6Dz#1v1Eh5&(!>4&qlK|Lxe(08LzQ^eqx z-0jBJeR{;@e-yRj&bal|XdZp;hf|G?S{LpPqti<4Z*^H(n0O+^#chMYTp@!w(Z$y=O;8sH;Rim;Jwki`5(s?1Jk@=+)K`(NoRXD6xV`x#&8V4P%+ zTrJuot3sLgRRa!UUzHdn0@?gk*mYEdg&qzoQ!Y3u&evRop4tS!gY3}5YSd0yXFELc z5RZoAn_Mq2x2 zR4}b!nOKxl4F|TY>yaQRdF^P~`+u%jvnx3{jEc6gSkPJ`l=Vwg!U++2M63B9MR^J- zMIqQZr5aL8hCRzL_f9S<{OyX}w%q6mI=ayARlJ*d`L~U3xUtq8)(SMjOI(r9%w0Fh ztN>ytP<8~>XY)wk6i|Yf;6RwcvukI5k+1F;uG;S@I1*IKdP!yFS)$n`y)cFX|KVwU zld$Is=6*Vhu#GK#$c0?b-!PdEwrO6Ry{ zmVxU@ovpxbd<_ibnSEbN+CqPn!LNJ-My3|UrxnystE}DP?6V=Xh)LVNvD<{#f zVNUv!rSepe_A|y1!~H@Jc!*d(dBnxz;+k$af^vzB17&pq^k^ac_IhdS#eqp6U#|Bg zKRFM27I+H1X{d^tSPgxdauEnCH7usHR*p{8eg=AeLWqd(5EwY=ao^GYtPnnvSBdPR z5o9pb`SQzt8+fZhjcvh=#$Fe1fbR)g&K+dCB;nk z;c*4#pOZv|oz6qL`oL&3%HFUrA;}f!FkUXKThC*S~+A zH;yN#9Xnfm9KIjI?&cnLSp%Bt=&r8>_&Q-0NFniT1yW1n&9{kPw9I&@zE2Wk0BYiL z)US@Q>6@GT)7rC}z<8t1GTeTH5bTUkS3f$X4~a@;@0JXm3?%kwTlUsPMN>w1;TAgQ z9Xg}O*N!`^atzYg2}{z&a9N&s^)-XE`;C+_M8su_>paujPyP9cG|arD_<}dm9Dnjg zOxLA|zJJP}Uo1pzStY)HgWjh{<2-Lt(U~fdu!YN)aa}}?ATWOXvbZ4X6+9JQa4w)Q zZ-!epG4V2j-&e|Gcb#`1aREQR(({r~?k)uC$wZr6M5pL|V7GfNVgF9N^)U=wE9x4) zK@K%y073@^;=0c7hegk-Bt+E#@(_JkS`hbHVWHYnFsYDj!pTg{1DUs$In2&prt z)BP?vS%Q#sPYe3Bk`8ulzQ$Z1s8KxB4Id9flgU(z0HBN^oYW1kM7jI)7@89jLxTC% z^5Yt_*(2-){Lm6@5~!yuGMx={1J8-j?i==y-7~n57vg8}74FO~ z6f^K(zcIFfW&vFY}FP{@C78y)g`& z1ZPKP6%IRyo(9n>2m!xxC-fN(+Op+97S2B7k!10yf}?-e5QD|w{a0gXqNc?>n@|!k z>$Lif4(pgVtkn$Y1#KNG-GnR|I|%T*ZN-}jRBZOHcZPA-#LILJa8H#){i|2(wiA3Z z$OXSqN>DR+y>K)!EM*7YP=t7@oi(Wy1C8kEu~rft&SLf5Wc@RwHwvF|n;XD~&2RgH z0udXR%xGQD&hid=?Aa56;)TdvyS& z15oTX#qknPz_3{c1QR5u?X6@!I#S_I{Es5L)>5AwM?{#o#cZo+j*=?K9tjQ2xY4AE zF=+iR5ScUlY$=x@_aDXT!)L*OK3cZz;j>-?EE5sHlC%4;$PmtJtnXIgW$?U{!yNEUg!(9=J`KhV=dB^JbORlpr zJJgkH6lQC8>e#Se;OO*BI%+7XB|(wa!yJrAt5PzlfO)=s;VNbS?WmBV!= zikh?pMWmbn}7@s%;n>|1;5Wnq}#T z+aRP&<_J&Cx6-+pGTbUoQc;`VSnd-3kHXPijN)um_e|tc*uCV+iFo5gtCI!TJFcMk z_{PTAej#&d@Z24gH1la~~S^>kTEbsuR^pbIT~` zw5cc_>0jP8noh=3{YMdNCHL_WDE;q)rRAsLvN$;s22rtZlhFeU@DW`>J@w?AW%q5a z6|w%p)bhW@^tLq9LTi?Yp^o%?H{;!Mm(pDc0I^7wRjB;l^vE^QG5SefGO_&jjd1%o zMQh0>)>i-V@5UV}y0R3#y)!r zMV0qs+AID-77(^m90hw4k?$L3T)7UkTjbO^`VJXE#g=3v3vklx_E^BR87^aNRJ}b!to&>83mR8b)3+*Sy;A3O zdFfIbN~T7gF<|TI5IX4W~Rma7BnF%h8>8mm;zpM3~#;1OP)`x& z2PZFoKN+(G1hapZ{;{~k!}x;HB8VXX?q&#mmDMeu3|RaH+aE<_yNk5clrja{7e!f^ zhd%FSMXv)I?(-juMyZpZ3_q6U5%>)e>C7t=2{_iVev~A@LjiT9#>k)dOET_h2jbBj(WYtlChVB+f-5GsA1F4LBNqs&#L@em`hk}8g-$P>sp)}L z64FZF`W`8wug$+y{-dLlQv%YF!_SpOLigq9;CuM=TQ%^!XPNOp|8*Jh*X$)EbM`xF z{3?1F@>eK4>`5{C?eg_n|B)#q-_-#_WNB{qwU2qd`&3ac<3-LH^rddyjqk*oRee-C z%a11R=?zmUB195P`q@%}`XBp$kZo?r6&M~)?CjUA@azjc74GLvvjH&4aFuN`vQYOg zkl=7Ff1$~*39*S9CZ&DDix3n38zws0)gl+WZ#L zNcz)6j{IL{gs4cP)%j1K~Dw9};hHeppArOf@N&1Cr|4{&PjuTqbnECkNCnd?t zWZ!OJx5+=*RVHo%zp$UyH#9n!FZ+IShg~J$yug0{4lic^%T`3|0Y4x+CGdJV_^>Lw z&5#db_|N>4lqun9=o&Pq_vT`PTZy;c6evRZLzo2op&*h=bLYBX+I&vv8|onIuWA-Z z4yv7%UR#kA*t3s1+r*XdhYp2{l&l@{5HH8fXz{3d=DRe-eQ|l|xjEH$Mx~^9PfE74{*TJtC&Rwl_6(9eG|O`}-r2G`tnTExTL%7mg4ongWN; zZ0X)h(Ube`Rb|U!$~sC~sxj$1q+zhFn~LPFFGKyP$5mzg%YqA75;57qg>P5EJBV+) zuryvZZGrlW=xNE`;l}?gfeO5JY&)l|&PGy@G2xC8h@K!pajBq(xZEP<`Yv|PrtOkB zscb<^RZRR%OD~;9GrzOqNp`9w9ck+Kgnb?T?3XS0?Ga_~i?#!y6bOpV$8~u@p>#d3 zW{#KSx~+EAdmJ|z9FI6}^-LqSAx^`?p1+1V+UQp*O50UMKPA)W#foGJ8wVc1aqPf^1AHss;&RZ zj-cYoPHt||f{|g^S`qZ}RSkCvYgSIdi(c0EkZ+J*-xO%;A0>S}&F+7|+t;HBV8UU2 z|GN-rg-|<~1aWjp-j*)caHsAle7*8h^OVb<-b_U1f<6V?wzh7?N`O1 zAqM=08&5iP11>`h*II^a}dlO$S;l~UVb>Df=am~uVl>NIgu$CLamJ)7Kw9~op`Kcm+4NfT& zCfrhOL4+!&t3M+*E!`l;39!F3>HkrfE99#lM$4mDgMgryA=t0AOQ4I7*iUeyJ7=ac z?IG@~-LWR#y6dV9bHT|4%Ypxw#xC^XwIIIH=#nZ2(*Fp~|K@NPb{r063n#ZgH|mg= z1Dz+7Hqmp{)}!ufvYgpLBw#Ih64*z1RXgE_lqZmj6SHKKFMgcPW>oAR6C8EAu<|}g zPh6$+67&YWKNCdZ=zPc!hzqVPvNALYtAVG=Y{Y9KT%T<5tC!8y10aSfY>l0#^(-LG zK-5FFA+QiOAk;JrTb^8*TqnO_-(Uk2M1H1v_TQ7nXVwaPOhZR@;h5%{h-%lJxj$W# z9s_MDl9D#c=*=R6MqXv6Gzqhiv|O-BSc9JHqsc75zc&F4-HL{0v+*wAo3I`yG|6N; z6S*PMm&xX@xE52`Az^^~i!;tbh~sV7emviwznaJ3FPs=yljz!A@XT^9iL%>vaF#yj zb?C9*xZ1k+WgQub2fpUz04@8%FO~M4tk&;)AjyX=KP^U}W#|}u&D3&b^lAnYxEh-%CM1xXlGBTjqCrH9+V*VxyRPeJ(men zqOS#kCqqa6xT}Nfu9lz3iyY{PKG&tjb1RrJ(1}nC{W;Ir)6Ujsg$? zAx~(pI+0K{-1!p#1WYL!432RrLr>V|P(D!3KK!dSa&|t58*cJ32Qz~H+?qXFk=lId zQlV(+mrW25vJqhix>AENbnOJqEbsOAo2z{p zH`e-G&D z^xZnP_Gh9MVuX&&h`M61v4^QJjV8)#V#BA=4A{#OML-zv4A`FR*1K6 zL??q}`S_paP_HOAinD)?StcOe003v8bIz$Vf+>wVv8w3sHd*{ zM~%1G^K28lad+FI5#2+3kRH)ft1;+C-143EMh3*pE$uPHSVyA?zX2YcIT_-|79x za$#weddE(S)jP>>Km4U6nzvnQW#sXe&yC;}-)xQh7F_ES;0c#@K}@M=kwXJc+nFu(K2U`-DNkE%ny~;6!37IW`zH zWwakIAjbSAL*HAHy|_V3PmssDpksgMckQjCg0;0zkblo9K(>Gr+i_@BQK`$4oFt%V z^m-dFU);%{o+f5o=k`!Y3LY_#{V@*%1x`ivkEiqWYSvIcnF^ zYJUzGfAlXC&Q5Ufkbo8s&zlGVM)jYNePeX`ajAhAjm#mK-_R7*Aq^8V!TN_Bc)pMS zvmEkBq;?xsc?`?*AkMYI{N7O&bF@mM>VHwU|0q3*_S`Dv-%5p-h%?F$OYdI*HlF^y z8~}XsZmEA2b}Cu>nEFA4X3oZSW)Ay*Pj>KDc=~!R=~KPJ(FDU&Q!2r3dOiMFZ_1g9 z8-UGyc;BW73lc$vi-=EST3frnOPz(>X&?xs@q9~+sW?l07T@aaDMGW*S72XGbJb_J z&6Os~8&#LcN1o0?Ggv$L-=}TX@*=p`I?4FP>Jh==7!)yi!1kR^n?Szk(KTI}8?T+t zOpkZNV3+quYYXyuozZ0|{4S8RJtX|4bCLv`4JrF75e4C#ZulIK?5$u(dEATh!0s&n z>tZ-X=ty!M_gL&noXf(;cRIe)+16=!pK9v3&+_F^e9V*7*edELF(pZ_4*oulHr*Us zO%?Bk2bnrVhArqW;Wlg`8Thxrl~CgFTH>AiA?rC7_!ZpN$Kkrv@y(@zSO!Z5sfLn~ zAwb<#N2_?1Xx7UlC!?9M(`iFaOY7ul?=A63b4}Gn+01XiYR1Ytc+ifH+nrPP;bm=eBFncyjw*eP6IVJpEd>lpm9THkvv*|L~s9n zQc%!votOiyX<9ocZ#x{#(Xq&9erB%uN8AK2c@fP~cxRuxB}yLEQ_kN%v4zj&J-%^b zhDRP|BR5W?M^^Z$AzlY^VO^+JoicCZ_N2z|ZnkajL33JPejDmO2bxK82mX-H%7g6_ zBC44UK*#jIzAHV}YGrNmsOH3`O8y88(W+n7*S!AG+AcHB=pS!AK?ZcE=MMvSK2($u zvS+f(UNg`yuQ)L>k9rJbqYy?lB!3(@(WUbY@)oz) z3yI%+KP~UM$}iyJg3m7{eXsna48iqtXY#K;L-;LJ^VFgk|3!292p5~I@qS5L^UXyGEn*Bi%vs*>Ju^CC;%Hb5vN)S-f(Kh* zP9o>BqA8@=!Ob#)0eTTgUt?ovLiwPM4*dzJ=gn`GDlT{q1pnoMHf!>K6ee$*v6JSM zkIRCMf*ij7{BVzj>Z8TAh={QNC_*2&>8!Ovll8AcllDl>WxV;rsbmf0U=}A^oifl= zpuu79gHu4D1o-W{^!ww}{MO$$QU^E=M!L4WD8;hUT~8)l&6hV77o@(6RTL2D4_^i` z)yA}ah`HgFo2GX%_2Pvd>>eYV!gbSVCC4oqXLFr^-d+KF1o^|txan&cPiKUATh5>I z;$5rWtKU0EQH*0}?@y^=jj6XnwC zk#z7r3ryI(kzj?|e(J*frpv9jU=_2a8yPo9OoXKB&&$AvYmYMF@2dBnWWAYkkj6NV zkDHoq@C+!`yNHDcxt51d2t(D*Wd+JJT%LaICo2o6ovn%wD)dQITfN$K&5LJx{c$z? zxsO}nc9_gmCQamwRd;(jjwm<-GBOkXhg$A7MJRK%+u_V$r7w&Zx^byt+S=I)q2ETm zx4riiQ)!Lj@bz++DemAEB;Jm7Ju+$R>*2RJ zH!_S?${8R7`oe3da2D%sN`R~kmu7^9yml=WJR4cT3Fp;s%{kz%=69Nl8T``seqRca z-kONT%dx@|gqr!nSLKxDvpqy4QCpA0kWX!UoFpNV`3e`blqdGgcioaIJFXTeLnL{q20ulF7IED3 zSoI0%rjrzs)VE*Fx^OoLn@ma22%Q}sU z>@R)u*4Em>h#B95{F|c!J}N8)z?j&-!+|E7!zjes1Lj$?d{4p|5zg+PhxUhVWW;SR ziLd=Vd$zwL#6j-WN$R3r{xD!)%N{D;!N~)pIBS+yCu|&{jb%%du&FCyPs|vycV4^t z(BMKl>O-7c|9TDpUAT6vN(99pZJ@xJrt^2QeG z$_H7y-6EaOUA}NhHQkLRly@r5eJf*Qwqk#8$gifXKTATU=(jzGEcSD!wqBr)6k5fN zCJZLW0Vbcf-mDLi?*96!ZtUiJN#)YJ(qFA&?|-=4C}?=(_w|5~P3#Pkx23>~U7O7q zU%P^2oYc&X`!OK<-C>E~&N+u`_yc+@QAaX9B6=2TaVWrcXWsRbzLrf8Zl z4>wL?h?7!_%MY8uu2aP!Rx~6tm~@)@?su~*u@^!b1ls8*4F@IJUrioCaf1(r>^5*!zwDeO9WvdE06mKUApMGuNcIEjfIN`e_k(HY>{&)Aa-&q8u^NoOOB!NVJ3kv?6 z$Y4wqlA2H6G5@;qnB_du#hs>UA&5oj)+yE)YcI=dzES)uK$TXyVPr!xWSLqEQByeN zSW$5OrkW+|=*+r+fPHC6>{!6RBJL6~($@ZWHS$uC@K53CFZr(Dt$n;*qHdzII=%kj zy+DbC(ca0he7S-EWmWKlV|HO;rc}LuF_tWR__YHDX+D}%NYL-RBK)u)ama~qZ*K{> zwX-<4H*G{TWM$1OK-E-_fqftp|eKzPc(x_pWdBwdN?&Rdd$DDi@pVVo_o#I zg`(IheOQuz;6$jodFkzEF3SNreZBGePZw%wWo5!a3$+v`6)rDA8Fwf9WHVehu)HshSWkgx*sK0@`mKCKI%M>6u zpA5>MNvq^xSr{iPUnE2R3?%NnVCXvh8^&)C%-a&<{{wa7;O438jf*#KhMA+AK(OU= z10`a?k0k@M@2r^1FuNxU%xypV=39GQ&N2p9y;2rE&zHCB*>72LUo6&S=HsZc(}U&i z*rDy;L?QQI6+@TL%7v#l)wBDr_kOE6QuX~{|0}8FDD_5?#dY1KM&bAke=mssH&^A? zA3y4;mySHYT`eX$dTl;r>(XoT1gW?FJ*@d~+1d1T$Dn?WZFL{b9TBw5oK&!MdJoWq!aaT7;M z4GLjB)rwN*GKv(Q?S%z7U+>xG>Mi&AoGJD#jwf~H!m2NBBsvRF-X$AtM~f^#1|n#H z{4!~m0MFk*?8aTE+AwI7boH{llgRX39BDdTb1p>P19>7ps}R>(r=T#nPSw=tMzc+)H1nfnx8VHuV92J_`-C zquX{@DGU?8gp6N!zq0vxhu#t78MI=5&#A6Xo?}LYc6+>$#X?iD)?y}_R!43YfqEZJZ;OqTl$xVh%vSI#=5y0os|T*zs=OPVcoAc z*Jfa67to4{*8oSazL z3o{C^8Ef|{>!(PYN){HEkuZ)k%<%`ZE!OqfTuJ#}=!ng`;+=hkn(yMQ=qkd!P)9KZ zjn==LBmUDb>)h*~EfSc64+7m6RD>BP%4Pa$8$1MIa1CoJm`A+sJ1j~=3X9Det*kIC zg!Gm)@jbs@RCkZDisG7zS<-D%(Ux^vV^I{=^8LGMEpLQjxsMwjg!-^60U4UP)WKyR zn7>!lS~s%fr>k_nKja&$cggjlqRdrc%FTxPBk}@_C^D?yi2Z!b>k%4DU zcBThm{jHF3@?k$l-?V8nZ{W>S=GYV-4yp1wnZyEVv*eKI*AHc2A;$4+U)3z#!N zqnI4Fshaez9d6HqV&**jxs&Qf^$bs|fD~!i77{xqwPZUqxRQK96*W2=;wJiU&z|n@ z{`Fv9FAvXn1?x1-U|of8{pOC(w~ht|Gb+c8#VM1b+^AF`)59IGTv!7zdSy%An&$ZH zKJZ0&WGB4Nm=w&N>6#x?$keB&c4&C@D*JSs^mR*vK4q@$5bP`nMfCy*R0X@pdCl>M z3-9*eLBG@W5Vhv_>;4d?7IdK$V)mVG$B;YG=I@Ssb80Vcr~VTw#_=trRiZh&GDW7} zCy1@b5wySKR#;qF8o0ft;lBTV;zz{|grO_9qwdX$o&@rJujfq^H|Vc9kbn6a_x$ST z;_=eabYhS!oGO#yjq^1SpU}N`3E-yBe3J^Q%ezAdlRbc(NXmw@NV_xLzeRgQYMNU} zAus0ksjoQWMSn_uKup&RHjn3t`P z)-!?|q5l;Z(E1KTbW36E9P1?`PQ@ecq3$%MJd-3BowQ=?lO`=oY9r(13}%NY%MwB@DQijaTgSkf zQ=0D->qkx1YsbO{Z-OI4f8Q6(%>0DiTHN`ws3bDs{G@r3T2Rxg3G|29BJuzx!S)F7 z)9H*sk2+~lwSlw=hoOaYtd_OsjtAu>SZt1kLLSXp_ryAo%aUa({O^*Q$JCU=YMOgE z&e3=y?Eri~=sqrd)xy$jaaP0CLgR^1d9$)o`KRa6dR!**e`$cPiqYVntyudyojbAn zkLn$XtH8q5o8f|p=itx2XMQZ_R43N`vsgsH=&BUd1_v(j@T8ghc}o6Ab0`t#B7L@6 zvdCKEroZ3$Cp|mi_giU-;L=c|uia`}q;lugco|ZZwM2fv9y>wA;dV++RUl$Oc0@7?YqRcsuU+~%X z@RTI=Gahd}?{6FUba@|^c4fR1u>Q>4I`ygWkxNO*U7Bm@PI2HCY$|%ed!>JuOjGC@ z-wCw*^c|4__PQN$G1DnfX7^`3zL7?f6aTj`^!G*BjIEShZ(6y$wC@3~2DKeP#hTz2 zj7PbSZWdLP^uG0end)->eryRCCTd-+8b1BIZI{+}|BKAy^7$H%9|~RPtO3`EQuuCa_wQdbD+9S+5v=3K4C-e77U-o|#S9cb> zx!4)ZD@z$(b{1~GK=KNC7vg*Evbyi8Rwu-9^rn$l53-8KJl}-po7qbmv(RBCd30pf z$=0gl1kr&+kCJpQ3mYV43QW&?{kiQY!xhlR-`^V@tnYFDcBV?lwoUv+n%c#(F2%dy zF^N$ER6|eh_C1MapSj2^XZ(k$?cszD)%U-D@aMwOnOhw6`9s{VC##GmBja&En6E5B z&YM&+yWaZn4s_B9Qbv?mSu^AU?VXw}%eEM{DKh&R91K?-2ZTCEOP^PG)tKPeYHUt= zm*^`LU4t#)N{3tzy>U=NRFa3 z9LyG#u0`;3(-}~6F#uDZ1_Sreu1U_w-un$R+{T;Gq*ZmL+^!M?Lfa6CYW+!^UWPEb zoW~!MgF#f@*y()s83mD-??$@jjZ-qdl=?JNcX!s#wUBFm88?O>mJT}bl=WY}PX(;9 zc8OY+Or*Zi1wvZTt<9vLrn{8C^7KsWp*<^l`Wi){-{mYpwQRX|oR!oHU=89hY=dhZ z@_MI}Fw+D{x3-xr=(F#zeN7NReE(6+Qt!1QcOGysJjd~8Ue5#;AobopP^n2S&1LV~ z3KUuPng2~{-EW@CKgg+JC=}de9(7`#><)Mad$52XrfPat5IenFb|vBhM{? zJ`-wDB>hlJGpN0Cv96vu~|FEnZ9Gx)o3U!^@eqO;Wxz^=*K6tl)(sA(~i~Ue$?!IcauTUzltoGU#I@q z_0WC`EteC;wx?|fYMtdAqyfzhf#Gel5^GplNW$r^Z~Y-vCr zIvX?2lUI7)IBxLbPz8H>w9nzdZprrV$r=uRKw6VlVu`KRqxFG#o3y~jiZLYP9tcvW z7WQm8^6O9%GDbmE;pI!0mCQ~@d%U>v?P7^=zNa-7#U+M11Q^PGZEYL3G9o`OHq!cy z0k-0OxppB}=R+w_z*XH{qz0NvCn5iSQy4rHTv5@v`Rr-^Dh!=nED#}+m)o-`7h}J1 z)O7JW=kC96atj9D2yDB!{K@2e443(BXA_Q69NgTb-nVB;-1_ZbT|KEQ%SI0q(M?h7 zZ>wQ_L|U8;q=XBDrO5@z|NK&3`ytW11k^+3s8b_$ zcHA~lKQ<%^USvV#(cG%8u=sZ68yL19$GsE97@B@PnBG(LF-{^Yb+^oRw=l@^FzLv! zul5AA=T~*6Q>eD0(DJVlwOT8~3Vd?%%4=Ik`LK0`EF@uufx}pj`a*d=)2g0+zR)lT5~x#+T#{?4ywMlz-d2px5IYupSGed56)_>~2TlTxT;S z0x$%LR#jMMyj@FY!|veEZd}2wGD>Nw?r>Pm3|4i2m2Vl{Dke5DkgY2Ns~`Vp?@@SR zvi8eER?$i(b8BNfGp0)JfZacDHbg4!`WHqyg{n^_#%ag}W(Ee}?Jt zh{L7-S``$mm501D+0QPXnm1yN^Z|@7)b!2T@ep?U#WMbBE4k~)91c8~TR-8WdY z@8)DdRygRGYbjt|dot8XYUgOnya|VCx}Fy>Y!-%>$t7Mc)lCXYyX1iVU71)*bijH80jEeqzbtQ8AX1 zp^>&AzuU4#>hBEni3c)L;z<~bVjLtiiCd;(+Dl$NDkAzEu72rgu6IiiE`5FeR{C{Q zusOpAhti=1nC+rgMifugrD5S4@J!pzAWjH+m@_BqpI5AS!!oIa1&rn51NY-Q1#bK4@<18{K=D zB^#?U+>D4ZyO>-1an@&SxF?GA6WGZUM7qj0{Q9DqjeZTNZP{`TL%D&r9@4}KQnn}- zf!}*~kkM3!1AF;AvW0Qr2Hi`eqy^+8;=1Y0T@`t@C_&EeqWdY8;wHYJr_O%EK?H#; zB1ow&hXm$VU0y?WlDY=8FXwKJ$B{+J(uzcZR0x0E?BkGo0W|m(%*;H$_6L{~0sSNG z`F(d@B?z~I9knY>d{Is2&a=v`LNc%R#z>#(enr@{xXbR1Faw$CY&}VJr7#9Rjdrq~ z9V{Sib zYkYzqelnDDW)qP!vAa_AN}+qe9S`jtGKMXtRxd{DJwDQj*3w6+qALr^{W%=|(ZJ$2 zMSaE)Jj=Rd<4DZ@)$}0N$ik<7;XH$1pL(ZxoTzoNjm$Vv(xH%D>F;^vy$9SvT8MO9 zcrb$UV(i*ttYs6Ktb63y1y#!Qg&IrQ#Uz2C2$=cnh$K~rc%U-qFk{vw5+cy)K){`LQl6|bkt|o+U)Pmede2tWJY&cKNMhj*Ty*T zH1QAm=wkY0J{XFErSxQ(c>0={sEIoxPt_nN*RS4z-y0yjU}^@Pn}@pl_v1vM@fM-B#Y`gz!zwl3>O#f22pW4*@az${R*9_N0}e)DYZfW*14 zKng|$!;a=x3_JJwx;Q@$hYU#HsH1eCp5@G4s;AcfU$r-@gw^9sV>*nFq$HW2tEzL5 zuOkUE_eN#!5+k{)ae7$Ew*or}#Ma&R_c@cMrDV^WdfIm)T`JXk%{Y%D9M(Yj0RC2< zlftC`;r#6WdU;B|#lp-d+-F)@-es@T!7(w$+T6k5;9h!UwpS0?MN#U-iv{!Sr@3+R zW*K5B^n-<%u~dR!tspCqzIiec`8J)qVKLN0!45XZ3l97tP1z)xgf(vRyV9U+N(|D& zmD3x)R*NML_loY;QGBi%aCH(pIGR9ebLv;HaUMom*%C8Z<8_v}v1)hD{@k=ehwr3) zZ>8mb^L7_I9ohNAPX{6+1|4OJj%1h3%rKdDORorZv1WdvuC1TX2UvU1EA{A7k4FWt z(jXh;lG5fkAS7)_SeaA{x)AP}RgsaUs+59OBFcNfW}X>1sn2Xf$=zXOIq80up%yln zPjPizL*>R79zfQM4db|>&z+U`Xfh;^Ni{vB=kyUh36;co;fSOAxJrwOr2g)zooms3 z*f)-r^z>nWkKmzZ{FsDrSWEpxY6^iorqfm$*g?Y7+0}V#Tihh5s9UxEK14%nIAPiw z6NaB;o%?0TCOa(1&EAJ=KrQ?@pl@T#?4=h^CnA}}%F2&2veeSfJ2kEU40Q@3l|3%> z6HFMidTT-y*Li+KM6KnLLYC?o!%_eKg({F}-c7zLUJVrPXp12}>vnB$?#9)9y1%|n z>OndWeQQ=*yhpr1AH|q&kL))5^?`Oem;w8MSrIp|`+q8vx_lZ16=D~n*zlXEF8q_C zqE77-=M&P-MW_fh4#kcx28kKtVv$8XZkjS8C6iRpWrm`&3Smdt;$gclU0=nx5q@nV zSbTeVgx=j7ams}|x?;el1U}o*dq>|xzsJoeXii<}6-)q2L9w|@B~&=zC-QNN&xzMn zR*c#HZ5mLh}{hN;O*?6I+Gbam`rdpGDN|c`QFwVFO0KH}(3mEn{&m~^S00Zpl z7y}4GhhgR-!?OGa4Hj`jyQZ{ZZfBgFh$jUpbzWd0`NM?TT73^v@Lu}c=!93WXIQTO0 znx%_>FWuXK>TPM&!nNu+n6*#erTLo5yWm((tBQKrGqF>Im&E-UyP@4cL&H&z2&ei{ z-F5H*!uyNQ%inPxJ9oSQ;_5tQ5qW5TC;ic#+FG1{FC>L;8Jl;{@UF<&7gQA~Bn5sg zO3_d`JE^H)S2x*f?+54Qaerxx|6Mqu~fz1?zve|A;|6F18Q+t^`FA;@P3^1=pA?IiddyQYh0W>KS@!ROY^4)}!!pEh zs6>?VEcuULc_HWZrr$MqEy*s0VV%wU1viLS`@#My@#bzyK*tA~nBMs;VNZOSST(ts zLZ3TY&h8I?_oqUIAm`G%kdraw*SxBeS>J5|A=CWF9ee`6q~Dx@2K#6ow2I0q0Wt6@ zd<1?uc6v1XjvqoBXflFmNNDm>QGe?)_GYw+c?nxHD9}-Rmg8`wWNxY>JlHy>Yf*5P z6LqCXoxT9AvORx$-hKyuV{Q~|uo<|f!z{BIlElQKrU7@DfcALt0LL|#iwM<@JWvMq zmH;(C%GVKCQ}d(O9*47}+u+DmD?rQ>;u8sA{miIZ?KU_GTzLL3tDgQdEPQ$pi7OZYOk1Id?N63hC z3|U(>j1g1vZ1`u647|ZO|Bqe|ruq|oSM24~{G9nAIIqcY#gm31tnO=d9UI=tN$@k5;cg0;1S7*#N%c3Mhnfrxys$RObBe zQIWYQt=%hpkJqQT7fwqS;b>%QlgW1hKVgP&ta|GrV7b~M5(b09Ft`+Y#gjqZf{J) z>e!icSR`gU&GS9-pbJeL`*iF0^L~UxL<)xipToTSw$7~nwxVGS)Qo)KT^a%A-H`}{ z)?srLkHHP(ll-68YBT~75hDHO5D0?wn6FMB?svdFRNZ&<9e)lBaO~o~TjBzeagLqy9JK7amm{El&tG6B|a$&Y>SZ z?P6TCR(cou<6_nW%PEcekkk*Z`NL|4TTfnSuPx{Kop6)QB(zXoCT^)2ze8xsJL&;= zY3cXxf2F39MJ@*QJr|H|u^A~xeNIA$>kg&dG0KAdXcjoGu2HJ-#Hf5rqF=nirF-j< zZv>S1&nI~qK5+Rs`f^^`Ej=i#>sr5+N8N)(YxWp3DhVYXOz-0hCCK_74LKK#S;ce!4UA7klB z7J>Z-y4cg0z8EUk3ZQG?V=wBpZl{-Qn$3CeMRq?CyQ%6&H+g&eUkvm|=7#rg$Q*XO zH9nS=^ZTUA@4KsBTU+m+PLqa9JLm^%*r1Qu%pNvk91>i!z3bz`jvXn{qO_Tm#glyD zUjI!WQ-b5w^xIfL$1u-&t!!*4edrZprP{JNO6N|lLfcnmwcnafiWEeQKjDYVVfc`K zP<|RJoXUk9#pAJ%0ZY_BOJvS!aKKctLeGa%w`61xD~f9~-)pr;x#H}gqX+`dHv1PM zfOyYy?r5Wx;7Hk{8L5U$4)9{vj^m!X|BllwNn-3R$7&%+@36rk0xE&T4Gj z4S0fdIHQhREPk6$qAm=2D`Jiw`}}r88>_E>ExDDufdjc=#u~VkvXPK3i}2EIQW|Kp zhj?82qJykYuFBDg(r@eVV8tKH))}p>O~huR_0m21{P~eGi~JT)!zUQ#rBog~(A~YJ zRF<`Qmefixo5qM};svgy_6y&jep$8E**$WopG_(pVUMWtE$7A3y7@gvMHsMW8n8+9 z`9yJIh|%gSSA&TA&|G19;GXZU&Mk0rS(FGFCq&FhPXte!wk7`b6%-jD8Y{*UIn~3D zTHcto4WUK>R3Ro95&9KUdQk-F14KBhWof+6WffvTOttS=*f2TG>Ad{6b>YCrvxI`W zR?8VUJF*6vI42L{t_I5-+4!%A!6n766Dn+7vyuvVuSBVr##EEO$ zb!s)NH()OQP`{_FdEr=tW0Z%A@?l)5Z)B^_%VOtDz+HL?>G>1XX21~tKoJm4Tg%X> zy;l!gpnUymx6Ju|oS7(m@w7+IH!>1?N+h5y9)l(`dDtlCtlybK4KXLUAI?>zBT<<6 zvlGo@oLKI;En(<`xHfdMi2u>xtF4I4!|(t@nj<3jbcl7yx!X73gjWeQt6xOZ#Fag^ z9eq!?4zDkbm-am+pWUblV-n049nPAl=af;62{ zuzveqH}L{X3Z)K#3+gyL0++I+zU;>V#)5@3H_}t$```Rx=@V$%3#fwM_Lhx4Ii;)p zXK~9OF}(fOwOPtNIDc4ht%Us-n*mf@e~SnIrTzQ`R{wjG3pT$i0)>UuE6vdR-=Qa} z7QzpguT5F#Fy013Jo{1; zOCc|90m8d$r4u{HQ{1X_w&{pBy5f?!uGyVnASD19wpAk24nPj);}l6_cgsmP?NucP z{M{iyi2=ieu0Xi{YrSVA54!_(COOhj0{FNL7ly&`e9S4cxMD4JXgk<`b-D>Z4+bJ( z;-ie=$b^C^a&D^EElW||M}i6lflFEyyNNF%3Lf^U&GtJ#tJB$Id-%i`a?^pJfs0;w z35z{rDak?*^>bD!pynwe%YCu!r#_85u7#DZvp$|v`U=Alj&LqJG8* ztP8&$pJ`ops3_2U_BIWaXvSF32kkQYhn}@7g5W|z8F=sQ$K4Rf4f{s9VbvuAEFu3# zc-I)!)$i46!f+inUJU=du~HXU+UhMB;dYj=vm;B@%wy_9dl0?o%skO zmqrDgF+@98MOI=a5AGd=)Lrg`z^260lPDAG*g62MA7F?Ql#z%1XIb-2gfe6`|F6{z z5+H^6M~wc@Z1aTFG-Y`ZGak6QacQfPb9c;0=K^NzIi>t%>KMLga7XCTva(P9wfE6ENfc`Ww=TuS*kfb88DL|ts~(>X8_sINJqx{CB% z5SWa&R?lzPMEoR@LaD~*pl6W+ay7p=@uAe|B}Yjugno#vqyi}jwa4Oq?n-Rmw{@$o zqyCJTBewmQS?vj3Cw6)d=*p*=duWQ@85nU2 zQC3-&QO0^P;HS3cYO-O>w!nbAILtxn(^~UB+r_rHDThHXOX^R|>+#WJ)(sgXCO)|0tMg9Wf>1;p1Rpo7lM+s7{q( z&M>;2PBFeEh&1xLvF~y@F8%s%Pw&eoIF{sV!7Pv+HrBQjkRFwhGEIxUtFs3*Qx_jd zYN{yKTovz0W-1Af4du&Jo(Na`jR9ff_fkw3Jcx1vN(IkH*zlLh~-#%>jdlCQ(2@xK>hVp zLh!7$rR?Q5Z?{~IkwYkm_6=JIw+k-FhcxS{V9p?L2MY&>E^D~w!~qB-l2%%2d|<}4aFd2e>~D?aIreN+D-KS>g=o!I2&bq67kzQD-JUv zC&!uMoD*vjs*0`-JotuFZ!pm^rQK#`C>a~LIjyOO+P-mQ^VppOceM_qd3H2vQ?-p1X&HTA6c#nTEW&7Cnb%~ zzPD`yIrpmc)?$8y){+DOa7rQ+dTOhm8`R7FZa`YY1B9NTIYyB^Qz9IVcR7t*YTYY* zO=Nu!{6@UQdo1z+SFPm^OKg+kJugn5OVX=tPfAK~%nyC@+N90q-r|HzT74iMl~(KP z?VjFx7#Xi%LV1qq7QDIuur_u`Zmo9@ckLxGeD!m!h2{mXf}K9Qob=ct-we zpsVj+@`2BO&j&{WierJ`yJvjQ?1S?|ee#O}FJe(MM3xXDEdILtkGXm|)kzAHCY)dM zQcs=2^N>9^<;9G2v1jNImcO!iI$FMj-~w_jKi2eLfC2=jsQx))G(fM}sT%n|$1|Jg zBv($99lw&>3{C^{0a{0Xmr!%$jK zW1P{5kWUkBlQ#%b%R>JjRc>@s(P?D@4AVC<+9j@i666$XB0O}D?Y=s{5V2J6@}FGe zzi5R0Z@}O0&v57k*%o%f{0p{YdSXhoW>#-7vQ`bbMCU zcG2cSw^wN4FF6|wZ1oj7HK`a86&ylwAGCHhML>2lH$YA~HxF%d&=SjJ&-yi}%H4|b zxXcs;5m^c1oT!`4AZ-j;%>B0Rr&)a5amAb0qdSxQE*fiUX`b|#%li;;?yN!r zKe;iT*01j%0%r%Ne^i=)JL8L`|}R8Sm~AU1|trtwR&~4wjpKui`ys)GTJT zMP>!^st?|a3Vg--)t|IxN_M$=WFTFBl~BdpvBomnByo;fJWG1je44C_Jn6U`ZOc_+#$u@*=NDKKa5WMkhzK#g}c73L&tp23}MTUv2lB< z=Fv5JC6n8%Bn_v|`Hfmx=8rPV1$z)?kAYJK3^5rfaIn_1$gv|(+sF?FbQNaCo1UhU zPTJa*pLZfRNK*F|?G;8}iE5~v9eCOO^d4BAehbfPZtM_(EDc;b5=mRXX~u7LaLWIyPJ_00;Zv z6u6uw`WyH$F#>xQI6Fli3cPVGTOcJq-6Bh;l3;@LD1ZGAs0mnW$58n5 zo+>`~dVs#1L-a+nnz`k-JCZwGb2Ar zi*6!p^@`zv>)+P3{{S`7ezV?C80mNg?hGG0(7#gydKQKXkH#{P%kpCTC@btw^KQA0 zyZQyriMsT(cvESkZj4pBDWOpyM`4$x?un9@kiChLl%|*v_&b1i7k$6l{z>4kr->c0 zk_J|b=u|=71ex3blma`kPv+h^xB3e(rEQeO$+m6=kE`_AQu<9HcI|0y?o{B(ghqig za)_y?l!@L}?M@@LCh;!%Uv4=OD7lQHlUAhRsrG20oqJQwk*~$8o9WM7xtmPv_MOf7 z6}6DM*g)*hw6>yL=%w^pS~r=Rnr^jW^|4;xJNgxW`{KTY!3RTs!xCWr2qE|-i|^JGLz^VlG*MwHX;jAqsYM_ z5>eFWE2x}788@}squOF&Spx9?puK4xUsx)ZdRWrMV^+C@Y&|((Nma0^urV{W=ZNQr zuf44a@#}bXQ6l&njn@XpR+qjHfN>?B-~j(*iq_{+@}T?6IpkE|YXS9q$Xy*pX|?&X z7s>WQ_*7{kau}3KuxmRQEg=_n47^jFVO?)95T57l7^V@t#`%nVfpv)De5>p1@>2)N zgtrPbcB-BE#_boO$YM2|KYh8cAvnXAUtHromcaE$JB3R_N9}n0O2T-N_0Vo@%B$<5;lzHCpg>mgyF2^a zjL1J(K>7c_8~@>AT$H+|8_x(g@S22}V!R=DS7`DHTLmCNdOT#$MlqWryCZh~#h&Lu zw?ADBcmL?Fr}1mLx9Ph;v9W}JB;Ekki7Ne%D*QM`5ykjGnJH=@;I41jN$>O79&NG4 z{Dd`E@9L|w%Dax7WswH~J!KRwd8z)dC8hu9AODlN_W$H$l!3b17qj?0@eL>Omyf+z z3B|R+{-^fSL1>A=u3L>=PC7ZU`mjJkS778=Z>Yo9mAMk}Z+453ug229twZT{)@6LY z|K&y@?L5LlJFk4k;1g^F)C`dyJ|Nj*hH!%@Ry8VVne~Fr7O$CM#Cw*>;|9kHF=M0q zYPa3SdGz2GY6-rShgZd&50L1{^p%jYo;+^Dzwox-BgQ|O8vYN?&h{~r!83qPV4p{Q zGHB-Mu8?63VROA!7tHEjJKd%^UB!O1>M`oJK9gBCH!P}13AXy<_>PiYt&%n39B^rr z>r}bmA~Az&C4ii_r#^YA({xj>E-rx>5G{{b$a?54&Ft`UYB+{xGi-x?#i`{zxvvYTYp i3qW`JIJ`8-c;AY#bWq^;g#Vf7Uj*PkuM70;%l`p#wJfIq diff --git a/config/examples/delta/Anycubic/Kossel/images/Version2Probe.jpg b/config/examples/delta/Anycubic/Kossel/images/Version2Probe.jpg deleted file mode 100644 index f1f4baf2f283af826a79907925a4d13ba808e6a8..0000000000000000000000000000000000000000 GIT binary patch literal 0 HcmV?d00001 literal 51853 zcmeFZ2UJwe(kQxThMcn?X~-Zs=bV!uQ3NH-3_;Q`WXY%?L85>l2m%6%fRdA1rWjM=%Wt4??Mb(?q)fI6wF-T;uu)upPLaC3 zho=W{l*2WROyM#j8UR4F9}WOK6hH5(NKXe8+}PRE$J5){6Af24m4sWmcpyFfy#X;1 zQE53*Q8`g*xQMKrq?DYPEC6stX8n{FS`wM_3x0Tw{fAVbJlA-RVTcL{i~N@Mn%GYX zAu34#fDcNJBO)d)k_7vy9kf0P=NH_U3^}HOKw+RM0it6~p;IZ)U;Tba!TE(>O~L=s z7iilQ!XGdN2owFH-${wW@`MloV0B8;QC~2uVkyagz$w4syq|K4iiqSve((fGFc11u z7xKJ3*iZNbIuG|Jj6;x5_Oo9c-hA?3ut+||4?f^17yjf4Dpv^ofyctIKVZB+V38x) zKnXyaV-Fz(%_vhScElgFK8{wQ#1Rb(2s;)^9>K&QdvDfdg>tj$7j99p6EQV0)}bp8>BUdBFRB6BM)s_W8##k(B{J=-A6a@A+XG z>+9j5*)jn|LJ$Ep5fzsZ5d&+brKKc}D5$_3Yt85%cP#R!bs?Hsf~KM}f}-M*?(T3$ zVR0czK}jJgxUMPO+|&>d!6tD@M=?=sqoY>XmN?+!^E2T=e)<(SKmDGCaK8SYg>d%& zoQ0r}pZ<)C1O4Um#NIy`f^*)u`xeF|jGBH`3BGZf0iX7ZlztDlWNqzp|>jrnauWq49ZZTYE=mS9j0g>!CNp zBX8f0PS4EF%`Yr|SXy3N-}t(@wY{_Z4XYP8iyW)IgT z6KWItPb)9pbKnGh<;<;Yu^|cTHL_X!X4WWmFVNp-_5Cfs9;ztb99a{Xlb7sX z@9UR)CTS7{KIU@kH-@b0G?BhnX@D~-xHOQiF_K`zH`!q?K5?~I1ye_D(w5j!4K@qa1o=Q(Q!24ABH=jPd!19`3~4e~9n$Ii? zJ)OK&NuBe6Kwc~8AdM+juWAZ`6Po+|Vzr&toQQkb`eH@#?jdl}BlmHzDp9zaWOds{ zhq?y-X1*=)DX^=R^2V^NY*q@bXU^Lte2wtCb}c6C93z^1XLj39cib!^yfI?`jopP*I^AQeq8U5&|24EncZfzbHE}e=fV-S6(mjmS0XDSv0I-$)bAjbP2?>i8!7@Ebw$lSnhgH z?(?34eGPZe?j=9%E-H?gkzx2)h+y3s8g46C@OXC!5WVq{S@zxJOTh`WnWf*yRYmJy z(5ES;W}hg3ds8XPK=Pv2!g$=bds8VlNACG*Yw1|2`}*R0N_n(80<*ES{_tD!X}vX+ ziC;-VR_v^z@lOLWW^l}86N&dHg?)7?+x^ChNd0C}>f<%EY@%rG`9ys1&dtwSqdK?& z&t_#L8)X^rRt9y9Q|tNgU(0|)+u!0N@_Aw{1u~w?XF4RJlox+Mt4r~|Mvj!&Hqk6n z=ChP~P=Z50Y;8MLQM+VWj-_qIl4-W*)1{&Nr;@(h}FshlF^JIECAqJf?j!zYpzIZ5?Y1boR3F1qmjb!X`T?V2N<3g7r4gyw|%qk)~ z>Fwm^=m77LirtloGKR`WbqO=wbOCR9J!s;mBE7y?u(b@iJ1H4{>K~-sE);{TM0GI- zw)1J~dp$4A`$8x1t-lD4zp`E(T>=R+Y+1}ImAV&dq9*jYmkeE%9P#lPOKY~-9L|O1@ zYxvk-)H4@&$6e&LW~$BXUHoGIW3jS`EZmni15p&z^6^p9cn87z>?uTXnYnP~vUtC4 zznFJC`5NtDjSNGM#D4n-5#%W|+H0UZu!JYM|Lv9((G+F4_ij+=&C*A=kQReg8s*lM zY0qyMK$dnk_dnbyMA`cJrHykkYK3%oe>nt(^DNn%VlHbxrufXC4tWB4uHxe-H6*tP zTv*I3OqBL8R}QR{T5P+ZkK4AA^`>mt)1NVTJ$=eVw-QNed14f8l=bb6UXmX}ls0qV za#%)-oq#%b+1;C$Ywulrpy*+l(6YEzUNzkpBXzI*1#w}rgdbdvLX~|SDkjsVoQAU6 zD?UvrdB*1D8c&q)rV-V<<@6% z&qc82R=0)1ArLl>zT{6ETS{Mc`rgaz!cp0eP1PrFNTq(Lgr_*~cYpRJj!cHC?SFdv ze2z?IY1y?RaXO?k<)c(?p+1{i!L5b^)p3L;M`A^bf#f-X-1{$lxud6(6GnPNI5Yxb zpGh23>A!L~ajXsKr5?~`2PN+7ex=Bq)=hh;D4uxwYY>vvJj1JZb?CufdqPb0{#}K9 z6&pZBrigpL*`s( zORvo)bG-bTRLN_i5RZsQBIuP43M9wXvhvyQe%bOdWsg3)vU24*8yaH4trCDUdpRw_>QQsL5b>z%+y@q3z_y61`TBX-!ewVClW5 zRyQK46`1_;h@l4ID$C+}hk&$99_)%i@=N5)5zDIQtSiAPExe;Lz}ErOmCZbI%N^P< z-=JCj#OfX-;oUA{I}*pURj(h15Q4vyM?aT#e>8uUQdBs*17Jh$=8)91 zrJlI$3|XGKM}l{;NtMBogU!fe2(mm0;hdap>YrTW_c{cU9V+rafWIb3KPg15O2n(B zI!GmkS8=H+9nS@FJKX`+)u;gLgR5nXhXBBS2+Uk$Y=H#mZBf!ZVR@aVj@L&)khpMD zW@|}>$*5g8%I{oMH1pO~C)%9$B+jw7??^`&Gx6m`LeHeW++MO(4vE#kkUmvNdzQHL zWh8g7=BkiyP%__o)rW!0w+U>?oUfOTr))Py0ys%4&IpnK{ClM9bslj`SzkwAl*-f8 z67iAn=0RhDqf8CPhku7&a;mO{&^LF-if`+@C}S($XK5$bG(hv2Z^z2+GUS{0L^-wB z+e}Tx0pFV1sGfdeeV=zYln=bhbw}@u;2A068XBKDd!wK( zrn!0>w_ei5^&Zv99o40RIk=zxu^%BuV_ZCZjC_62zCIul8_)pM-7uyo4`276F!pYu zt)`B>>w5U0e%4{(Bb>Vv9D6rJtGPLNdb(kk<>W_vOtl&cfrHwcfr8H&HGo)X(u1QUjuMh+JdVE;dMA3rQ}v^_IH z!r@3yUk4S>DXfG?NgLzwPdGKVf2LEzAkEA@e6%=B+^{3@E2+65;r|M6;_c>hgf|Xw zQ!)8PPUMF|_;_M8?0xL98XO5}>}2fybI`CbmKeMr4X6Ri@tDm&bZZ7ilKxeq#XWZ%)z(^m~ajc58I9?8IH?f z&T_U^<##j%ZI}i!ef!LN!R0%FS^zHZn#0;?#V zgQu?t()%BtG=vW}C~_n=);--kJ)FSuQNp_MpJg>4Pxs^Uu^1*!&OhppRKoLib3vfI zE!+&S4+G>c{oo$efoSY3gMU=e)%b%qz7xjN7yTC$o+rk|$;IQxGe)9misf!}gadhy z+WY!=YNI?*7<(TS5<~!If#{#JDA6%77K5$PJ)TSdZ|e{9#kl=3{em51jsI7Sp|{hY zQ#3dz_HI6A_D+AHB153ScBlX!U2h#TLxZ1F4#7|KUx*2vJu#P5-CUf0T8jKwd7YnV zP!4=B!eZ}xGzAj+p)fxGg52UK`mf}~4o>QxZl0Jwj7xdUUrqa01=s{Q?dgHFHKC6u z8vNn&M*ZnHL~fuX{S%hN!P5tHsDHu}gG226kK{*B6fd?TfCRjt%Bx54@l#841Y=$J z_$kFw0J!F0hJ83(!7C30H2|O|9K_24^Z*2m$gKb*M^S!TbwjZH86Z0<0Z5PrERO+K z01^TM0zv{3FyKZ>OhimcOHM*UPD@WsO-oHpPf2o=e%y`=|CmEaiHS+cNGZt3C}_yY z$Y`(`8O?DM%Kr(2<5*oD;0lAV|BThW2cK2^!#0RADCJ)xb}%q<^)q4z9;W=Y68!b} z70#moAUF^(ln2Gd$0NXnk%%9~l5p6lL~&Km*i*B6MTp_ifblLh4o+H=XAa^Ln8;V^ z_*^NbtJ7-;Z%MlR%FEmusb)yc=LJ4eCkD-DQ0rA!T3`FlZfNn`D7;#o);2Wv^=?i3 zoB2%(N581_qS}t(g)M1qODF&6jN-b^k;QE=>h>e-28I~Hps3`L2yCKMIG_Yx?9{km zD3Jy$!80(DD9-6HjfqTAH>E{*ORRC>VFkeFmV7=43Q=$ZscA0dgPQpz!v9(Vp5G!I z{xyVVmZHnW$C;w5r^}gQlA_Cbqwo)e>EX-Ge?#!<-w_P{JA&6g2yO`0HoAt?%1AYi z+HA7`P#Y6diKO#s`UX_f-=o9kOvS}ndNmEbCRE{c^*T(;3s;=Cv}ybvZ58WsCh7et zxzXX!F-x=M4mk_^)%?kC(fk*4t-uY!M$2kV%O;tI2c=+QO2s#)eq-l@%rgfM_bDqS z{GS{1dWVh}b6#B3&aP?K|HjjOFYE#9gwLQZ7qJ&;9z7E0&kKnbQXI)oN^#!>Obd-E6G0&dBI=+TAVkV#FpMzXx9+6z-FPpR3E^HvC7djanY zZ_zI!$&o=y55Dx%WfzmcRrfflIXsJ(zV-W;R{1YIZkbk2deF2ysfmt8^o0o?0=tp| z7!4wLO>rbLg@D;#P<+JuEquguz)Ag<^1BRp(?{Vmc(}A-gBR>Kqf0jpSXzc2-tUo^ zMIe086$*;LD?zSgx z>wWQ5-hH;;@+_n?f0HEsn_%VEqw?~>jwl27(N5QJd9Ivs%b>1z5z5{Q-S}yEx_%Ci?n(O)I;Bv@7S5wi9bx5@L zN(gPkXa6sXpB)!vy=}pfYHu-I&I~x=v&{FrES+d$x#W^ys3`Xsv$ac9NWs$Zq|;7V z@i*Gh!X$|zTJ!UgVp&=I<+V|w*C~c;3S7?(C%$ks1BZ?8hhv)_j{K$j|HRSX9nZLI z;2a46M>8yTiX{hB0VLoFH~=UB4j2Q@AnXHP-bWC2$wK{aDB$4nh$(QqTs)fVkJn82 z;5rGM=OEyDGU=qVj}KZ-SlGi`$R2w-D}?ZL7Y?vT3yTVg2m=br0cd-KE6NA%fC5(y zitJySTG-((NJVx_Nkb7sv^vV!MduO*WqRqf8RC*FLKexctVBwr5Fi)ej&?`+*uw+d z-8{VI0um6ut&*0O z7J!3$ND*NXF=0_LLGX}RTue?x1pXtjgWVA-V33Y-CK_5ldIL*}>_7DK_xBg_7Z>ux zI0=i&%F1H7h=~b;6oTG?9zON~f*#%+M?8+1XrR0i7?-2n8yw3N+?n|LD6)g%9_!(b z{>AxUTI?qw67h=;4K84g`bQ#!QEn)Al!uQuXkAgP4UU+if1Zc`YVsG>zp9Uh<8BWM@8WLngc81pMme#=f7wLtXt@MR2+Ah@Ctg=w-5BHP=;8)ec!L{XxUQzU zl&Gwfl%SZ9=%0jG5st+Mz517Wf5@XX9kh&)iwjatLPSDL zR!u}zTvlC86O44oNK1*!NQdLN~vicDGavN@I?4x$NpzqB-mD5>wnhvcztf~ z_8;-UJ|KjI3P%njr{m%cZn*=GamOxiit_qVJTAMrz>nNT&K`jcVu0qe_d_Ase;{4{ zg$e$>8pjO%olzjWUpD^d(LN^g_H^{|x5uDVoj`N_oF9G%o&I=fvDLZ~XrVqC}uE;JFdR7^D_Qf*URnz5>E-{yu0d9vg(D zad5@LP;B^-1_KHR!t_|!=@=F`qB(|DurSiy0}0Y#Wkw_2kyyA5gs=JeV&m8_0}zh# zb3yro@DK=dy7{`hfH3yZgvK3Z560GUumMg^9~8nFghfD@1Y>3b9z5YFfaeM%PJh4- zf51LqKpCV3)IHIGM~F}Q=a#~{J&tvlM@BM<03L%6w=&$r|34T%juYo`M6T?SXW`?x5f< z9)H<={=wltZ1x8SEO_kKAV6Js0MOV90Tcr?0BofXz@a7vU^chG8pyA4Ga$48V@UvD z$+~##_aF?`ALW0^pow4+>h0nL$D-9u%-{%Lj2{*Tp9yS+3m$8dgRgco04x9pzzYZh zVt_Ot52yf|fF583m;qM61pom?tK0z$;12`?5kM3W2P6S$Ko*b-6ax2va-b5Z1Db(n zKnKtZyae6=W55(J4}1hxfh}MUe7zJOLJFaVFhE!#To8VU7(@o51kr>TKujQ35Icwy z!~^0B35HyT#6eOZS&%!Bdyq$v2FNo=H{=!M9b_7^1X+iCgTkOBP#P#Rlp87xm4T{4 z^`U0a^H3+K7xWVJ3N!(F6Pgcw0Ih{SgZ4t-K&PM|p_|~F%fv7`7#mCwCIeH48NtrM z9AOw(C@dD14$Fs?!x~|ou-C9D*eBR74jv9Q4je}iM;=E9#~cTN;#3Be%2BEcRZ1tAxq9H9{*k}!}kk+6`kk#K-;o^X$dl8A>$ zk;shbB2fgw5cA{~j4Ps(qc4ArLGsG^$;lwwI9};&FPZRHwP?4M>Q75q>@g+$h zDJFSJ@{VMKl$4a4RE6{$sSjxa={?d`(h1TXGHNm*GF>txSs2+ZvRbl1vd`p%J3Lo!1h!~2ssCr_O`bJG9h?UU^%KQYoU$}=JuV;L(MN132Zr9O3kXo>cV=1wS{#VP77CsyTNb5+u*C<+vGZI zzHE2c`q}o_dDzX_BiSq1-*XUg$Z$Av+~9c5vC7HHX~-GOS;{%eMaU(?<;<1A)ycKZ z&BJZU9nD?G{eg#`N0;XkPbtqhFDb7wuNQAV?+_mzpA4TXUk=~PQ_xeAr<_mSIyJx# z<(J}j;m_fJC4eg+E8roJFEAoVBB(0pCs-;tEkq||AQUN7C-hmEQ}~>4vT&#HfrzAt zn@FL^m?)K~o@k_Kqv*QWDKUiDEwLeSQgJQuF!6fvH3@zRl*Da`x02M7hLX{e&n3T0 zNlRg*%B7a1Ii>BSv!zF5Xk?6K;$^yIab?wH!(^LfcjctyeB>(SzQ_y8yUO2}|DeF5 zfKn(_m{nv~v{$^NIHd$vvQx@ano?#{wpY$qo>AdYL8=s~EUNOUUQ~Uc`dLjx4Wm}0 zwyiFw9-{tK1E!&^5v$R!Nu_D7nWZ_Q#jfR~RjReBEvX%({Zt26M_(sdXGE7-7omGk zcU4bXFGR0RpG4nOKTChc;FJNzpwSR&sArgJIDVSzw8!Z>Bfv=4DAnk_F^{pAanl*R zGsb6bomnsuH3>H9G^IARHN9`TWu|79Xf|ffYwm0Q+=AS~#^RpEwxxz;isjT<;jd7kqD=esYQyx?}>u`Ri+y=|2puAQab zeY<^oBl~>&O$S|vY=>2ZIwAw{5vhW_fm}i2aoRyu^ojEP za?W~lOYK%gHdA&?_I3_3XYjVl?ebja+_>Ctc`kWx?`Yqt&F9WfFTgACD_AJBDD1o| zbN61+$)dQT@5LU)Qza%PZTF<_-Mi0pKd}^A>RY<>z~;frGL5qOa>4RD6?7GG4}pii z50@X=JsPgmuY6u5Q&nEgRh?Z!T@zaisST`Mt#huMs<*0t)u7k#yivZfrb(!&xS6f_ z)??boiBE{0TzPWXa;atWDf;QBXHL&%pW8kkYdzaK)OMz=zg@q*t3#`!wNtgTrAx7^ zxm&Kgp+}~tu2-tJwokIJ=7r>ontrMN+5zc-`j@gV8(%5BdNQay`0TaD>y9Daq24#A z-@F<&AAUPxGcxrS`S!y*w|8r!exrM1;p4dDvF|C~r%y0V?wc{4 z8Jk7Sew_23+n>L(K)R5=$hvs%gV=}WC9S2G%ht>DAJHH8K1Hoiu4I4a{apP;l`9dA|hh!Sw21? z896Bl85TbJ^agB=Z3X@(A;2fVQvAJibes0`h8`oScRdK}};Gtb-gswNSeCu4VXmAFGEsXHAuc9f@1Cym5C zp1Nh+aNE_s!+gKe6y5z{KH%e0Y2Zxm*hO+u?UGxzmrI3+bsZzmu!m3UkTyrTQSFBj zt);V_j>G4v5Zmk5b-KYm>XkNp@bTrIL+noZ>kHo>Ng86-C-)H3?$@iiEEtf3af+S% z^;f8~0kS}kSq4S%3duuYOp0G;E+lCBew99_SX>B~H3AxYMqCc21zN z;B{umqVl)yt2Mi*Lm)gC^U4-~r@-WUmBX9ann4AZ)valJfx46@R|!O)=%30bB$SDN zt}`%kql6PzP}{oYdo|U;E4TfiDWj_KK+&q+f-#;iM7bhDvem?m8D(kz2M5)1dAJQ9Q`rJNLMqi;KJ8^?)js^09^_{Qu zLgFO&ZnW}nyx^xh%KP{Sgxl|FSD6oiE6Q#@wZRJf7VRV9JG5YtzTWQ>ea5vQX`l~)et51b}xEEhjtUsc|EFhWxm`jWTKy3O5_G~U{*XibRm zQ^Z3(D#8myH)OqA-IN$ZUm4yVowNydYiX#<`uep6UHA1fo3?VV0tP7#BXKXW+$aezQf-H8@JY6e-!*)vVeyCHm z*_E3U>%Z0ftXevm$vrA&J=BD<0IsysTDyZ-E12>B)U@ZfFTI+6cb1$cU}HM0eReB^ zd)q3_Gc0IJmV027z%mNud_Ep>UP`Z}S@5db6LXWSCRf+A%QM+Z?D>&#mVQlj=c~uR zQ{>0;_bT1w%?IBz|C?9w49$iQ|Ioo^^W{T;S#pPXkJn}8e(0M6-u19y_30HQx2wjl zB1*=tKh14?AHnc3-oN4l^gvjtA9b)UvfmyGJ?QcebNqfk*skT>d7Vh)4nj5Q`m+xhZf z9_m(DFrVtN(XG_4VoZm*B+pM}XD5W7N$_U>`a$3Dua~K(8o^|uY*Icq_ZmAHTo98#Jt2h`tu=UFE$4{Fn zE!nCHyfwceFCG}iK@!~81zj6q7!4RZWBVw5LRr#(SK5W21L&A^QMuxdGhdsD_o^33 z0@bbZYgsex8eqz8-oPo zef+p){84q>NqHvs_q8Hn;0toqi;R{jmo&Y-zGoIKi%GUVf4Tn--W*{``nbuCxzodM z#R2m;RVBimJ?o8Cx{sMI&D4T&HU|@IgF>_!`T65|8qM7Y=ZG-#_vm7uNalXJ^gVaK zDmj;zc5OlCf~qW$lE(XJg==pY=jJEy62!f@YWnAsgX`bDBU(7S8a>Z4VcFM|A;TB} zoLPe)z*(qL7I|i2z|+%1m(2>+JchX}i-^QmxQZr_)fGQD*->j*`>ft7pR)rh zQ|aMTf!8jF`;)?Jb~zY&jc)C~LbSc=4D({jFcK_GpX%V=g|!VvU0=&hyGC}Oe4Ohh zd8V1L@~pmfX%qj4QJJ=pDoxr3Gu|SLy7lu6XQz_1US@K=+PbrQ(^7XUs%3D+8uLAC zO5lD1!$ZbUjycj+7dBmnzF^W~{>!t*+%dC_DUN#@#MIR%AXX>oMnh4!Ne_zfsXW-l zc^GxMs_zE9V;CC!v~Ei&*T3~>^l_UX_m*tgd_am7#XXl{op1Q2H3ru^-Y7S7+Fz`Q zd%{DgV80q9^v88__U@8mRA-Y~D#$;D267Y7NMQ-^Cm&=QwdummN zz6%Pe1>@SR?-1z_&JSzX`}7_0WzA0llBLO;uU<*;c>bHL)vIPE@-iPn2N;_J5JB|k;Ep$WE-y5zd| zo`SItJA1TwDyBPk%nePn0^HvvyrV+mW-!{YgdfOkS14us#Eiw?`|?Kr+uQDzt7UlR z3SBGHVxmvK&ul*(nD}xzB1!&a@uhWrn0D%-rwJ3ez~%L94EY2DxL#STcRN3nBI6dk zfQphC@g@wlyNN@lD2J9?`*13u_B!KAW^T$Y_29iw)UJ1Sx@~5qNFcp}*QC*%jkK() zc`e6MkD{&qrA)uB>olD_-n>+-Xun6CcsTouPyA1)>3rty)#iH9T&ZKOa~;( zhZ5q3chi$g-67%gNfhj8w|LKZDq@{goTG>kHi?6b=s$UVw5HHR+vDK?`kEtUxmw@H z@TaKCp5AKUw2XN_0Z-AXMUtGDsc>EXK$0@1HYYoCA+xGVgv_FVQJ-9$0bWVx9!OiiR-wZ0M5a%i+dT7>!q4Eu)TEk{fh{8uw}v)6u)Q(IzcHc`{rX z3}=kTI{GJ_GA~&99elRm(B=%BuJc3WyhxB?3dit=bdNc-BygvEv3QiFPfDC_vmf!BD5pob!mQP$DV7E6`s+aCAE~Zp`fGPvOsm=zGR1qPNJV;G?aU}0z0qdqg^rw7t6ky<%+cmqV0!qm z3u-=EZ+9y9X-sLD^Qe#}jHlfvIam2&RpzuUJo56~22GWZd^npH{sbp%dwGB)(N_Y) zZ;+x-^X$Y9J^fiRrofHZNG?x%8L`%AIx44{%AG*{Zo-aAc?{o(#zfNuU~(S zHds|PH8M`VKC8{#nISh$Xrm41yptWM?#XpSmxC#ZL1j)#MUsBG>|H2Q@0|R0SPDTF zpMoTFF4ehS`z_fVGp)+cmgasqv*h(9UzKcE8y~(HcK6_UlmIj#?dRF9VUX(8_rvQQ zDtSF`20CHlMJH@847aYJ^-MGpBvqMSY6F_5xqA3K(^5&(I8I54^mokOUOQ8j{`ze7 z26tV3O+=a%^>#~h;sB%WUjIp^Da@G$bla!V+&0vi4_=}C!yK8P7E*hyWfrZVol=uk zb9FuR_>SX!XCdii{g^Q|7Rwo*txKL!p{&(g>ymA`G|l{;c#E)Z-=R+q6A%HF(FaZH z<&T!%@}`M#A#G&k)~HLW(z>-W%S)`C?MVW&qoFK@-#E7ce$Ri7bVv!d zW8X-BPUnDkM`v7ofJXG$Awa$7xIt?qrZ?yQJVk4XfRPwyse%_ye!*>jf?s@btFtpB$XOV^`L2*HQtR2PNQ`l-d4T`h=&icJ)DQQ*fmXbxy-m zg&?QVDo=Hrx2+AKpW@=(5W! zlg)$}xwo`TE}1hcQxIqPI_HK~j~Q?Nq6h*>sfl_^my0#d$YttbF=uD zQ#@kSI(n%y-j-4d6nimnBzNe_%zb`3w~;N=RGY$;aCV`_B4)zw)j;RXTZA&Ql+@39 z_TzO)-n|@}w{LNC9uzNKQ46&2V2w!b=Aj>8UiZ#*A=Y3|khDt0+(5tGkS<`F<7MD+ z;kvX}3-i^UR(RLFK@H&)8|z%O-oGRwLV$1xV2;25UFr_MXU$OR~TmGQyxH<=9ZfVyfTLR%zT zvf4=R5Ri$F$o7k!7JaA9BkS_cMlQc1#=$$#)8lTzp2nH|PPnKR?n8XoTu*%$Zb<04 z7mZ@J@893&#Ar95Z;_KdF!Qdv-c_P}4aUJVuN0z8bv~rn;6^FIu$D2>^eSh#{v&3B zXLeKJt>GA4Ro9EFx{X$J?{CUIG?Qm%M`R1z&U7<$q9F|Ori0RszLIINm|nSnDx=*( zE3%i}Y>+$JB!!o|`*&V3?x62f63@LJQCDh_h$xEgOSZY$Z4U6uLGju21H)5#q^hX< zXXBIqT!bBo^tP& zVPz>nZgQkm!r)V+5b9zV*^vo+j%hVvcywEMkR>^@vQbF=gl{C3mB#1yhAD*#2H_r=g^ zLQ9f)7TI?mVYKm8R&epE|M^qBm;V8)<%i3@TcOkqgR}xR&@p_%s2dB@TAZ8cE*?%+cdPXr?z)RUcENjZ*H?6uG{BW@^RB57hY9RU$AiL{X)va`Q_B~Xb&rhCtvy|f$ zc_x9wXZm|2uo$hU^tiqmlF}zy_JQZ!&zqf?%UkGL`u1XDc`IU+or!p{A5QmX>K zrzt3~59+W9)n&4myB`_2tztB{|%-EdQ118O;Qk&%pHi zbK{8;9k0?|R8Xg$rc^wt2$v5#wKW*)bYti1s87J_#G}}U&TT$+! zpy^Thq4v=YE5f&Cv+43f$p>4C0Wz}enZ@HZLsk49=N|@M!KDvoO2RkpK74(Xp3RJ%p=0-51iuHRRe?jYUKwp=A`+MPtL0^DWiA-oLZ9&R+kr(FZT~KEyjP@d+@qfVBPiwhsxNKR|}gw(A-FqX&0xw(>cAwn*F6vkpb-*?Hg2qI~(xkB59MW67r~0Ulevu=xsFXm1 z?2f;H-!_Cx$tBrQr3V(};V(r0kU2AE{<3+T741qoUzTj%6Ok2sCQnVna3_3BinbyQ zgZ8@czA$}ZMs(o?hmHGKeK%9R4IsbrzJBq2EBdk|MTVd0n>*{l=iRz`Dm!4;l2%-X zNblo8m=*fSpe4$_=a;J93l`;YeWWjPoF1+OR#zf0aCkOXvT`)yO`P){NW@eNs=~ePk)PCPTptIM{lg1 zWzEdx^-9XGb!zkn>RUQ!R;IRApxk;60VkJ~af(7tc`gUW#G85YP36!#0I$Qv<%h!2 z6^3mW9J-xT1|CI>mY3-4deu8UY3~-&?!7@PJvuDNW7t@4omg$7O_S0Su-=w}M=6Kg zBzeT5S0XEOCN270!i0SNIlBpD6C#jKSb9NcvTt!@0q(K4te3#NVf^^>{(&Q=rg~kx z=7hDOQMbO`mOGHxeZlNre6k1=ztDgvT9@-P1KXQhT`g`Q7X_7{J;AM}tLkRnZYL)d zlPBlz6`hEwikfq$TZ=4SfPckL-}<<8w=N46EBv*q>?T3;!{`3=!LSs);7oc2e66`T z;go}+jP%l}?|)Hh_tjr0w9Z~1({bsT?LdpaW%*upVM~2qH@HQ7W@mWPJT5dW zd2cdE-0<#LcOBXp1}ri-G&@$6sT-p2KWm-}|2%Mtel8;Mw6fmql}rg{$xCTl4MTD+e^e*K)9w%CC7r?MAA23oV~ifB+4YT+b{4NMeo)-; zXn>@=E554Un1{05tNhyedVkN-4E05OE}(|5H$Bww5U?HDWqMJ|!Wgex_h}ZFOT_@? zl^xM-bBD>_CQ=LFi70%Mpt``XEzUg%EiHg%r@q`s(h^hYf9YHkQ+U1kjWI(y>e{0j zV>*=v7(~TRu|MFe?}ub}OWp@>-`CvgF%TsZO@0bQdZpe57;r8z8}XnVm{)s zgt=X)?TvJUTJNU$j_0ryE*(#M%F54gpSTLRK95g%U-isb1mH>qLPp(Q)#T+OO#}N; z8pI9F?c<%vW05!QWO(!DgoXM)NmMrS?Hue@SGl4eRkm(r=vT)CIG?v7o?53R=AiC+ zPJwO_i8iqPl%uHc5m1gWQ&&JE(_?TbgoNLt?R4K(oNBd zK^IP?CVYIDouoQytyH5$>>_!c-_Uor?gh!Co4I{G!jx2)yqI zlPz#Pd8i0Ylq=qK2)LyU<*iCZOQrfs<$}AR(x7`B>J8;S+YzJFXT`6|C#5+;t^r9f zNXv*&%Zxu$@-u#I(g)ij5^>z`Xy|*o)Sd7&9h1fA5no6a@j-U(q)=g&V6lXm0Q=|z z$`uFxo0)}DD-4m(x3uDzkT{0-W2G7&j*E8J1xXK1uC}SqSWJA}f4413bH#6~-O zcr^=p>G5SVI_>@6%K$uIjwCGtzkbyzCR&A&hU73hTj9Q)2?@*Ror}AyO&FV+k!Xob zX`!XEGjYO=d;_m#?ys+$Yy#?0no0ZPDU9>`2lk)E$mvVIUZp$0Ssh4kPm|cO4Dz?- zLK_vUf`>mPwFfA<#f(Ph&^LH`E+NYZ?=Ek~R)HZ!Mf}iK4C{MbbhLGe9NpgcGh; z;JqF-#XDu^Cqv8W-O1b*CxN86ThQYnP{7*$GSV-b#8-0p5)1x43x+~#?^*^nRN7fX zZpIh#4Wr&2qS@I9;_eHOf^H&BCO3v*lr}N@3dt>c(N20!J1R6FJ0P#=8bSIrV6Hy( zUcH7kuLI70f@t!35=3D|s1RHzb2T-^5;MKvs<`>6wCO{m#Cn)?EH)|CcP*`-Mr9L zcY>A?7_D(ap$M&&R5*m0L(8iNfevMR&7Tn4uMG5c6tzztqzwv~(^w z@}|&WEYxiMR-U@sorS!Fo=trUSZc3}kM<6^?_JItU{3Ay5;EY2b=}|TJ5woaP6CD1 zmHX{2;u}6WTg}Kv(~TZ{U-^7Y$Kl-kET;Y1XlWe+5lKY3A@*rv_-=|JR6mAJQ^}xG zX=jZ0&Q{Dd`Z+$Fyw;F?yVPu3a@Lg!GM5qtYww$?VpNm`4Fsqz2hOKlG5sT)Qh4ab z*M8S?z2&lc`zPnDEfN?RkTr*ZUj6H#k_(Q3kCN7Wm}F!*Ng@dsBOhA35F+!m8|JD~ zxS~{+Q%-5Oc67=((EE*?5zVu6QBn~wvGiR_vJ+mM zh;Gz4v#Pthwzmx-$Jts#bXA*$NDrOG1|k0;ps4UvWKxPbV}6v8uB}Ehpg54zh0T$C zao3nma6WzcsvO6Y5^++v%Zi~ao@7i`IUaWd*$i7Fkww%@%_nPHn< zaqGr4SatH^{n`cf3oG7CS&@Ml!zc3By9{>Mufz$sZtLKtZC|cmWQ37n_!kCtcuz!^ z`;y|hF6b7ypHLsEKrcP9)T!3bu6lw|L8@lw-UL+GvZ{-nMhZmAd|ib~H;~Qy3~C5G52LN_jWG>ZnLk4SZ;R7P8GKjoHGi) zjX#jF$Q^@3=i%Ug>di*vt#l%^ubnt?Dfrs-jni+{E=h?2iZOPO&ibXSc=^*7=O>rF z7Gg>p{1WF<4<3_Vn{)B$miqkup`9py?#;wS4VzA;Tjn=}1_?S20Z+G$ulLtZ3rP&0 zZRLBrOo&gp-dggNqt2)&{naC?`_s|yPe&jby>mUHzqacqEO^}uwKW==k9QStm(z-0 z*Lbk@g|$8B>0Sk6#7g#7F(I9<8M%yv^BJpwzGo4fPRtk%xA^@&`Atds;dR&23n5>SZ)Q#xfTZ-R&}$Jp_FCdAnqB{AY&}GpBkD zW4Eu@nLT#ey>p!-7I%t3)hWKjexQ$tge)Sg`LyX762V31Iz!GFYK_ixOLIqV0}5zT z-0g5GBVcO0@m2`9^+BC?+V!hPMV!>^o}0z@Abb7hd*!KdttxF2;q`07GP8V?7B&;55k1b4bwTVv%gb_jm{J3UAUjnmY*E?H11W;u*GUuhvcZ%oBo&g5j=K`Pd=;C zD?pk!SKsJcS`|j3tY%{b=EJhoYw6kyYo!KcET?Mmrs@}6XwQ5yD62mNXhiB)ua>n| zS#$NOlt$94H$MoEhw3|pYw3=Usc;gtul5n%ceZeTbaPZ^E@1z0WuUVT%UOdY5j3Gq zWatGI{_|#awcqNZ*%Kx-lx&kZWyY?V>BYu-Kd&rhn=Rlm@UrP_Exjxh;p!^NZVP8K zM%xtN3a4Q7rRF)4^dof^*-L8kzU!8;h6Gj&`Q-|PjY;3Oeij#$ZlWBiGa(vTkR~4^ z-$?o>1;9zS3zX2uP2rvR=G-HoOZLV$=|RxExgQgrrF-`E=Ka=W$B+J7eFE)P904=D zmlxt|&(^CE%67?osfn6Vd;(r#U|KrO% zq^qGgk7?+MR9QQE!`t})Lg*c%1Ru6iuoNhy?lE|{YS_CP0tNg<1fsJ5`m`79*fQ7% zRbY{KmRXdI9IU`I=O+6NOKxA4YiPDULiSKT1eD&>@cje0Yfk(F9C1EZ+^Km&yXyY| zg27b#suI#R`_a2#=bxuyftnv1eeG}BFk3v62KtM#{ZCaB=kh6rXonZ1LuLK}`Xs#3 zyl^MB9~s&-$Nm9mW_JGpmRt-6FEzrQRBY;vvs{s;JwM$u8E zlbaUZRhj&Bs)*R6;y2@7yrQ_1eB;s*e;=M5llZ901G(i0vFzeKQ9??vl}iu-AZXsR zo~x?J9$Zm=$S68B3Uuat8~@24V0osPvYF@#dF8ihk4v#8bXjP9x%%a1s>5ll+-d1r zVguqSd}MoT_)^TB-w3IuGadcGNUzu9(w*Rr5W|z2u0v+Hk{S-qXJ#sCeocwor}6DV z^#ot2*L>Zuy3Yg#Dm;>UY|_{0?fZaDB$3^R*cz&Xq8umL`l%E7>9d z30p}|gv%kAJ!7?dM4AP-oIW2GFQ(3^Dpjdt5+^r|QY>bhgz5`OJxxLY&dVay?zuna zxSVHSMyJMg%{e2P#-mq2DeOJokesw)o-YL64tCMLGcLboIhWU9N?L{nY(pq?yNu1+ z_~J6ej;GCeT*t~!(+ zrDf#q`47Oy#33GNOkQMNdKd7rc}6feCzHe$`Sk6YpMyx5y+?NBJYu8S98Dck;-D%Z z`~maRd0{k!&uw~{oi#5zJK${H0KG@oeGmohq`k3Y<}V8WuL)qCF>z3p4A=hiPT)5b z$6+S-={>hj;M}Yfdi)YfBOU03g462QcvmYj)t>-= zM`Qb$PYD~Z^HSbE^7ZkVR{mTAn{!DFC=U)Y<+BaRAeU&3v950NGEM}3T&G!knItkB z@hWk|EzA%U>6{U#Yw`Z`cb=*X2!M_0n(LbfM9$70KMkFDx$ZnGpK+>=u+V4E3-xA zC;Ov^f_;&$=b0}rG0)j|BvHbr>z8Mqe=qkVW0V5kOO4TBBBI8hoz^$_Kl_R}Ms5o> zNn%8a&{&*sUIeFJCdrOB>u&ozO~-5R+|}uFfB2{JB5ZprtMLb*eRVmbMX!~WVYl+4 zmfeqiYaS0v;tQ&QzJKl9zs0JkUJQ4k(cUppQrQ(04UbB!6s#Hm+*2m`Pe%ihB|kbX zKfy8zo~Qfi>y+75cUdlnw&g-rV>7GAYc4c2G$k>mBi;qR6{N^|)UyuxwHQf3bHCX$ z1azOiJu@}cFFE#}RUK$(XnpD$?`dm(RNTmtPV4gVa_&A4Q`vPu5x?U&C%HY+G;A?Y z?7p`dcNPf!VTFOSGB^$MVTrN%Gg9(VWiic2yOr|jL76tb)g3(TN z4}Hi3s+YK;EgF*;9CyoXwKGsXt{4?RuS;$i$7=@U6hMgzK5W=$?jTaWKm zH=}h8_AGSUNV}*Z5uz-DLMgaQ|3Vh&ONIi8aBSXOT)8r=nW{=7*8HZr zuZs0{zkfuEy!W4HwWEs(hEh=UkCZk%L=R6eaI&19?gB1Q%j_gE9-uuJL3m<<;w#lB zR=UY8c{|>VGt%D7&Awxiu+gYa@AqeP02PW209OLl9`#M;l98uJ#wV_o%5$j&>;c~N zdL@1i9OB$)L*;Q*U0Z-f=FHWTmT_Nk?{LLy&ZnXC!HT#w1j~ckLl@j|7@}?$tL_{C zGF5hEdGb>QI_${6{F+!iH@b(%hM3fFkSUuSHO|S+0yCM5TAnZ74Dic|6trJ~i>zh_ z7tg$CelMfHVPr{H!W@)YgN3`{;R9ap{ryJLe5IApgWHEeGz6Nt;{4VySjY1?1F)gv zWe^lS)(~T@suJj;HQ^LbY@dTmM2y=m>j)S3+XIl5)UIN(ch!r0a)o&hL~BtnbJ9NB zGFgl&oui-=h2$oLTT-;88U6&AM4O|cJ-3# zbIRTm>JADar=0CSa_2y}7aNnubehSDoC#F8puF3z(9hYSdCfdOYMCDP%1XUy4eJdC z29^@4Nx(mpuL(+9qz4k2HGyT+?}NfJspd^*Ta__JwRO$wHKGVspC{Lk0b1EM3CijP zi-!{H{{Sd*K0;#S_27_G(miMA@zI%)LAT0Q-tKMyep|MSH1(f0bx2Pqb?su6)X>j$ zCqgxe#hamL%aCnL814HX>D?}FSX%HJG+(tep$C4sDMs^p6}h4QzVCX&ljIlsX%vIX z8?Q{JVzy^Ie2y7KwyY5*OzbX#{=Fk+sqB(o z`YV-t=jeJ<9btr;cRi=x6d>kKw7BouRbN%ndVBi3W&C?{Jnpt{)$e%suFqJh`$e>B zv=h%bula*lw51}6&iDT{n33M`KYBV$l_8FX+Iow$Ty|N5`p3ocU-xe<{sB6Y@B*u8 z+ZXQC9zEAp3j=#Tymr_L(W4Q}+xvbdN9lu#NOZXO{Kmt77kX;bH5ichOG^J+*VkHm}Ml5t>xqc$VDo%4XMX0;6eeE?~H zz~}_V6C!x^c|t$j1l}p1X6QiI$2q#EL{P7CmC${v;0JI1@U7g>#}>syX}1kV*Wl(G zff?B?E%e;e=Fv-Vp3f1M9P%wXeKl9{S)M-9c?Ts|F0_sd&iRSTX*Y6@^`ivKQqS1C zS0hJShDaDUsb?e1WQsDf^Z{1n)$hHKu?BfVG*QLcVrC}*0P z&A0Sr;u@&~8%*QSVM-9vsVp!Tv;=wt!ATR14h98V3>GzviEKjLhgtT4uA#p%D{&WL z9byzOrcJOkMx4De5s^V2{vg-zJv=<$qslkWpM2a?*2B%lZ|2nZzz`65Sk7fRGu}S9 z9T|z*dsvj(vLS>@EzF!*8JeI>?+H3YBIn92(j5`SV8mdwCt8)xVt7}IvxJR3!bk*? z)18l(GeF6EhmyprW_1G0waK-BIyrz1YOsUrSwy!u@HvxjT@!OvSd>mH?8p4I@Z*U< z(|;PikM;^v)it}k3LC+QD{srC0*e8GrjonOi)RNdd}lcfdbYG3xCifa`)DX-@pxl` zMsB~^nBAont9op!Im}9)fz!iuWnl~n90oSU3p*dx4l zQf`GU7TXb{BmjI$6W4H~*(9?mjnm13=fe?V@8~1_oxeG|{NvTmJfGu1=4?fLqfg#C)u0jpM8Oci6u)tGi@ZBhR?IJuwV z%w^A$p{LBJ3Zc|}!$7+uE`$am@FM>0xOmHfSAavvS1#+rs8U9`4wOAWk~?(EX`=$* zhDH4yH7^wVdd*pPUkTEtQ$!-Ql8e4#8)ABwP$hGcO@N8wePrX_)}bQkY&=o_s52+- zpAx6dU|?!2md25N$dq0D1^2fS#p~@CvAYmyY(M6@rQ$?;2-dOCL(D9Z-|wd!gr}tQ zq_BiVyT$YQE9#2ni#IIo^SkiFuXc-AES}lOBGwgeZQ@ z3$airP)hTrC~P9wF$e-m--``pI}F$H09kxO5s!7E@;JBDJ`+cXXvXD#fUUe2mWYAP zTKrz$<|1N&0MfbBLraXrsIx5$#Iwf(lyLYdeGKh5 zBCc~S@Sz;PzqCLuQ&E@Q4#nqPDaxK@yk;lXDP;#oYfLp0+&nBkcM$Y*clGvq@hIbk zJ)C%djr7CkB%-e_rot96xxe@@X_|+=Ob|sC#@R}Dt>Tu)w-ML4ymgNwk*3^3#{h&= z1u(r|^-JnnYcl6WUmx1DOrAmo?v@Tuy~}o+(d@j}+x_x#wG(XJM?fkCPnC+6q3zc} znLeEEJ3$$)Ec{kZOfC7;(OoVeC5N1~x8623>CJdvCdnV?hAU(oFSK}cwx`EeqiZkU zz~kPd3v0H``hgnaB8wulc0hGv$gB&E`>bl)qu!z@Q@~iOE8cR7wJZ2;c$&Y*6+So) z9OEFtnH}yvqu9l-37xwJ{m!|4X=3_qa0N8e3j@P4$e2}&t^NTzSrKE;Ttndrg#@Bj z7*tdlvq1Ij6H3N#@BByO@gAWjEaw>lJbkBfxb)Z2P!tyN)gQ_Fmk}2Sqm{qz;|%tn zy{rptT$g~piKDP7k1B7sgJZ}aL#_*!I3LhqSQ;0+dR!FA1ql{01zP-WeZJCJtjly^ z${kh)F@g=OqWxVM7${6K9w7$Pm88Fx{0Dd=u0i7-+>nAbDbp`aShYP{1jU;IE-vnC zS!-YOCnfqgxF-aCwUg8#=-H>y%%oFN#{Hx5?Af(wp8*U2fHkrJ7hL8Y%jY9p2Z0o|kT4Fw2Szhn$LK#(?~0 z26c*J;^Le^txxoI(pYtIU^U{*7->rGopXSb5qy2PnWXgeQ(-j z1SpBbcYDUXphwHH#i>=kUzMlCIYCP7t7{g~eis%o))Q;}DYn6BHK!`4bd5vl=H|iw zJ{2n@HXnWG7r8V)!!V)-vp$F?J1b3mZv7@qD!5vvHR}6nJ=d;D#V(*CCT4N^OvmJ0 z&ySJAR!J0yPU(5e=dkL3w&UZvZUoIjX4crjn8;b-l)4pR;@gF+GiqZNe$#xE{5!Ce zL51+~$mUZya{;jj5h+A`3_t1N6b0$Cr^c48aP2M8ZT!fovN30u=32b_d4>^WBpFQ( zR!vBZqZEuyjT!X%QZWxZ zg%nxj=@0C-C|Y0*Wq9F1v%pCxfMJ%)16S&Jhd@K zh=O(fX1}wXAT)e$Xsc4mU{z!V7;Y?iiZOh8AL@dp<|AQ;T1_l6W~@o58PIi!U%M^w zS56JZXfg2Bb?4Ml{(~$6cpu9v2>TylceDT!#8sG^Aygfj;?h0>uhQR%rF_NV>{23M zFM^OI&3kVA7v`-CcTR{E_Dxeyq?)?xPE335-fgmaA#8pbVE3Oe#pU}K*xZgE_@?_TaiEBx4w}(GfxK+=e)=w7n@IkMRseeBhq0Y zZ1Qn~f=~3vu)6Lq;E}`m+W|wigQHh8`+8sb--x?lP!5$a6y>U%K5+@GTRLO}X-xul zFT1NEAKSbnGJMZ3z?!q08Dnc3&sD1qhPt~$irNzka7lcXtGLIO3zI*uKS%UC=-+zo z%YCwYUN+=gm+q9ZnYt{!7$I+PmpW0|TdPy!tbHrXEC5Nl1%95q0H;f(=s9_B>iVYZ z31-hY{YB{z+z z5cARd7{6hPToLU4a{HF=!PAM%weGHDmEy{ESeX>5oBP+4Y8q{+?>tdSwM$sMf6G`0 z&kdBG_zttQL-@$Nar(tY_6V2_5UO+}Vg+ zA%_gp5Nw_HD09kmJ04;`5|4vEE4(cO!ow7IdA&>0G5>CFvtv(rhXO3HF5cG~YJAZS zbuf5)RjzV6(je|0IUjB%jdQ*zByru!BSnl@^Ls}U6r|SD)xj2 z>|gwErMP6qT}Xx&+tHqg!H=ta9VQE=%dL{kBd| zAkkVq0MLy+^aF)YOwk@V=1NjYT0R95a%4c_oF$X8iG7}HO!w<^jjWa{*ZK2Gr6E?O z!cDo&w&L4oTTQN~rNpMKZ77-&pA8ZEOhX9f+``LL#e|dljl)6QoqsBZVMuydKe(2B zjSo3Awx6&`50PUKN{RE{*zlz+Fm=j%m32}aE-U$`5~NB9;ozf&b&FW(T7M4?3XxIT zLZXygol;-&Q0H)8<(iLp-#(UJ(0t9ZL6M*$H;$asAKEB8tktUiN{@za&I7+u1zNl2 zUl@@Hr4Q%jei!_mjNNQgB0Ea$d2J!q%`GLw%!viI%v@)9FVUCea@7wn zGeLRGZ}YKc^1&FQ{c5B?XzF%6E6u)XR-0%9Yd%u)(%liJLW~ zM7h{hK)>3_w`gPH=Z1fnO_PGdjzZW055?PEByQd$%yDsLw&bz90M>@V=tZ(5LuP1G zG_mK9b8o-256YSK_iM^LP-0_3V#BagF`4W1c9{pr*Z$NI5%+MjR8n`lyU5PZPCe8a z4xH3XJ@&0}=UuYNQedFLg1iQPUM={fJZf|6qb#lW@X>PI-}|xMya@Bl#<}-%V8)mE z*>jtq2CaH|u4E;O@f$eOW7}8ddqb7g9(a)|O7NZUqui7AbCgtH$z7n%+>_zfqjt?d zfSnVjj@s+NPMfB4Nu3&+vU#S;XAfQyZ;s;#G1HnliO#llIB= z#c|_bX}!|wlo! wP~q9aDPaK_hV27RRs=mG25S=YHp$Gq`9&du?5wc62~1i*Ja4 zjtHwdza8z$w>OWJD-(j_ohExlqLQD{ur9|@8T4>!9am84w{9Y71YTg6c|a$pj_6m; z{5s!3d(<+crAQj}|L7W75d_E=?X+z12p{a|v`7A>xl_qEZ)d7B$osO;i+>{XnnaJY zi_lLREbUX}aCIG@c|-pXP_OF~!0oNK`D`E6E=?PlrS&!NbpGB@V&?p_jy?y=kTjYC z%y^K7?86d?=u@|RVTap``8YZ0uH_$KNHQQX?jPa^ntn0 zrk0sG%UQ>z9b1g^6=XXvy^u|7$Cp7TIXG{_bqcstQVubRi^%``Q_JbI&POHlSIrGt zimI~a;r{@a2Dp-l%`VRTsS1pxUi#Jma;{?J?pm%1K>>zIWE1iJJ?L`dxT1Y|WepMf zuTvh&co+n?$?E^Yx$_Pl)9S`9yruIZztQn2?|FA`Ds!jnmRdR^pyb&8l%GTSk>U=G z-Ul1D{K{dH$J9Dym-6I^9Up@x+p0rWP0=r|By#?#Ag2UKdw8D-hupDjSUg8cAWP}N zEB3VIA$kM-1$4IDU3=`@11g+TuVw#0-+q-U+8v^%-`y#|g?ok=w#6sx0H@UPU||qRQ#m z&Chu^ErXJhWl-!9qR39WB-v)dX&iLg$lWE%ljz?@2<)a3pG2fNuURWBKO3L=UpW092?&F4=AIB)epi{42j$UEsX(JD_Cx$s4Bp_kn~s1bWw~+V3mE=b>j?2_ZJ;s*W4XRRE4M55x2lGMYh_{2xGKH6j}mPX^@Z-8wZ zIF!gBMBi0u%X-hHWmVm#v(l-|fmhDH6}~_RAA55FE>dV-NpM?>>|vy!`D}x}MJWh7 zF_x5juyMSgZ(N}Vu=%7^21oG@!oTn+sg1NQ64eqQ88`3Jz###7^Vs%>k4&bC8*_zfmLEm?V`o2*g9 zd=MDM8TE30tg=E870(kzGPq2hz)Ra3G7`)AcBlYhAml|IIIoou3fuIby8@MnAHIq^k&R--Rkd=LO80 zRPl3ser*<3v&Xy(v(2G^#hj|cQhHW@@HI0Y(0L^MPBw5N;&f@sgleQ#vIq5wn6X}t zKo3N^?X>g5yGi^?7vx8iSZ#b0?O(@?kz`4`+MU)(CwL|ir+*9Y9#bl;w@fJ+pH(%M zA1SzVg`j>ZPQIZ`Q||# z<*zh%Jo+yiuu9*)uyv|}G$mo5?Z?Np1$YGl*SSEDTa)1GVu!R$^GLMQ(K>@8VeO5N z!dL64VTP22WQPG}LX50xU=Iw-5f5}~Pf3pc0P2xG(X2(h-fD#eY zRznQX6GIi-P`*IX(7h}#7h4KUO$9Ha+rQK)Be&B(y_+*mGU=T(vJ<6kZSgM(Fz4ch zkEAR@*)LCP<0eIaGzrz3Riww5AOV!)U2u}x=Ci*^SJ6L6bx;4-( zU$Y15dj8FNTtQFV7SFJ0N3b(r^FCyr53bukDvrAbJR8}W7W2QN<)gcTuw$fG1^=$0)n-^H6|Qd)-( z>Oi5<(x(-{zK-In?b=bn9KbBu<$`D9$!K9TMX=t(;xYVKoa#*YYy!vJB5noTp3tgt?*vRr5@y%x24*~;4$TDsS70l`tLh!&)j&R~kdbQ)k7Yxf z7*5MVA`Toj){XwxOVa29ZO*1(aD(r#2i9KLpS%9|%KIXS#$Y~H?K*ix^@=f-2#DWt z`>^>6b{xRDB+#LL{+f$tfad2zPQ$wiMnwUAo-z7Q%3+3>(#*zVZeuNlc71oDMMn=t zD~?y3;6+!BWJ|B%;397(!-)6RnJoUbA#!RE=AABnDTC8@A9an2|6KEc1E{>s#J!!t z0$FNjLepwC^%Yn*<$t}_?A95|u?k|B2%EaA$tH^m1+6cI;#P0+1gjD)#@xEv8(UR6 z$2Q#nfw8=R=)}e&R%KID)@~HaH5)`sJ(sKF| zvL^>RCOk>qQD5Hnz2+`L{@wac@5@W6paF@h;7<@yd!l3ztLh`8#LTb|ZY`%mP>+F* z_LEf26<(B7D2Y&}-y*+>{LM&JHeZDuWs32eCPBl{Dt$^d(?hCAYP?`K@ROix(NP_2 z#22@I8Me{xS_2JdTR~;lXDxa<3SQ&!%s^iw5lKrh|49D6k7e09X@ghrkLQ66QK#@={4 z+Qq>@@HNWNDXFQkVYW(;?M-EIp62`>W;{u_=;yKKUJWLIkZ9N_PQs7z!dgn)#vLD~ zb}noaWmkrkHG?5eC$2t?Bl6WSIEVEp*$KVfdlG&dQqFVAx56`MVzB}n#p>%JQ#%IE zf1a(i=l*mh*)?7xI(8y1qE!0gzt;_~P_RQ;z$7+@PwMg7GcP0~K4cxcwhN!OTF9=} zPL|vUa6Fe&lY1__?^bX!tl0=QfL??&8jyge{68$#qNf#;DGJvvI^Kyd)l5E52zXwyAd!Pee4 z7x52`CU8j`BSmtjyhR%Yk?`7q5U_m9zXqAU{cXbeN@9OQaw3D;#soT*fZarufPV&k zBIegiHhTWrNj1S4&%vB|i9FHv3J4$kB^gqRm{kN2A-#Wtc-M(J%?N3mycMzK7r2^E z)@XX{Xj$EwkIFy5x-Gk*hUmc@P$ z83|`3N%=8j3i?CvQPw;*@6rV|7XQq2yM;NnP^GFNRR>3247F_%^DxQKdyg>lFQ4a2 zT?gfLyLQ?9dbC!WQrN=S# z-rWqL+EDKRFa0#A@PZ@?*cpw98!vYv)zKx^u>p(wh@{he?B=q^D?-}wx+yw0bScgB z9}jUzHxs199v_X{yFNr@rQyqG9F5>VH+V(w=yydc+PUp+>^dbZOR8$gEO4iwy`w&0IetE<}Ji@vW_c_9@X$2 zkq=&D1QC{wQl>?k8V0e^E5L-c!yoKxz}Qbg+sYL z+h_TPb&z>V5@axtLfx-LOE*@W51TSFh4j7?O(l%~lq~qY$un9bx>}O7CV2KW*+0&q zAbqgz?c@IH4xe9L2?RKJT0k+JLSX@)zWee=6+MgI5ES<(PZ%+sXH5wfH8fg50;Oah zcT+)c<#N{l`wVt>7l%FkwmJE^`{?NyD%iSVR^P)ILjSxPm7h$B234sj+yjtvD#=z- zokY|uR@y<+WoZ^nC0fQ42Tw;$_>oaaZAD$-`*$L%E1BVGH&ng#zru|vnUXCI>>j1l zRepPs^Wv@rQKp49G&;NK&bI4tS!S}K&91^olR@J%VpRu}z59in?la0FmXq0KtCC!I zl-F+Soe1LaCBJx}+*{83fbd@IooAXhORn^19OVpJ5So%>k7a_DHqS&8f}Tb_zE<7# z>0G-s+Tgrk8h`7?h^)8lf+S8b!kN$49U>#1?R?JM*_erI#?Oyh$MZFsd~Hsil1VKF znBBHpwS~g1D+>|6WNPRnz6?wqoFp-PgF`g9VKqFfNV(pEj|YnXlIxO8ZmUN@s&Nz0 z^@U|5U*A6f=56u;A8azuF-}#tz^Z(41p&zk2{HpFd_V{FOLv3C`R z1-F>fT2aQ`N^cx|~G?WMx=MRNP{WLB0!Xf677IE%V_Yz&m zNqT8un*RivKS**?udm8GFt%K-h8dWKB?|M<@hM!X08E5P5`$#o4&SQFYj7~_4QY5;&3j{w>apsG~_-gJpX?0<$JeEyN?xQG*vv(OqpA!C045 z%l+FLrZiWhaPsJzHxu&7Y?wx?M^Z0JpEUpz!< ziB|p7^cD`<+IT12Ib?4#_Wc#Cr?*Xo~UU?v!u z0@qw=%=j!R_qq&}*55~<)bljg{qf9=)g!L%_WVq_;WEkN%cV+$%sxt9BMiTO6_1a0 zNo!`b_=}sytF_F&OwP)GTuf@5CIH(d8R(CRdqHri(BzQl+WjDuMyqe+GfM`*5kEd= z4pdb;`+qt<1Lj&8OBU>i+63~cxJ(4U{@w_+#c2y|>g`cO%J;}0pvia5-;jlP;;s(( z5Gx;mhT-qpjOZiWnQ_G9FnzF7*SfQ%Db0PzmNIb>R(c#Vi_x!2W6u@{KTvsN#{;q5 zb2>jAO5!RO-9-g%qlN9Z{sX8sd(IzZ9B{b@evbahwHrW=yAKuxWi0eCq7HFpPQxMByvXU_(>0xy)2WuUx`IL1XO~gt!s^qDN(h)4H@#=aIIsEb_sMH z^XSUD5Jv7<6}G7&QX7*_<>C`kdzy~!VxKmhP-f9yH#_YM_{5i`F+?q+_)&y_GpqA_?o;Uz6@a217_!B4)`BIe zZ!IiSQ|~l&YRFtqyb3CmRqB*_EnBc=BH6$A4**Wcg48KF|AFfQm5}#{POa?>=B)B9P;#Q< zGfz#Llr(ClKa%lmm?$|HboPHRH5%sJpDSvOQ%g}lggh)ek78_bpLH1UX7xV^RTi6d z)Eg<&6ldl-n;$~qmYlVM{b2l&#zcbLUk93rCfrz+gka~-&Trwpa9pFQz%u##!jH19IG$<5AF&s2jlS}%fXS&S>-XtA_+mtr?A0@tN7FY* zcj?_Fhek8!4{T=anle>Z6`aH?3{YNGKGl-Qd>Ru)FMA%&H_{dyufPSAK2oG1WJ+rtn$EJzv`n zr{T2GSjGP6!Y#3mJzLXAD@Ln+>+#YL8jlR?4r0#z4-12p9!#+%EBmorc3v&+Bqt2} zk?4Z~que zNoQljttm{0MR6v9|0E+ecGo zht)q>vfZ^0xqB9`K)7E!Yaib_e^=>|S0$p0FSR^qu|e67pAgq4%3O6)D|bTpj&{|5 zcpq84>OA)`UI^V`!~IFTSU=fC+aP1d7Po;dWU2R6f$1@gU#@y4Y+W#6dGcm^olna+U%y?WuE4HaNWAoO6gJ)m+BxDOmHf%V7 zBqyKBgTeZa|EQK!y)x5reNNYPLjJZ-0Pz=SZ>Oc9F{35@b`mHqkg zgSk?!V&B&WMe{c}sIw~haEhuC00_?|T4j}^sy+4KdO%poGaAYMGibJ;DY(n`W9=AK z(~cK1%x3a55zY&KrB8Sj;QeO`|JOJe{Raq* zz=j3P1ia4r6eE1}u16pA4={AAq4XudBKkS5dSLVJ%^Lh;UL$THeIcZ7^N0|o>zoam zQhUnJ?Akpt_2n<0_a-6Se)38osaxQo`NiuQe`e~AxxR7ely=L?@LO5?hH;frzH8gV zQkjz%&v|VoIX`F6Xt1arm74+0)91t7FH6aYgNi^kW7~76AJyZ4y?!S#N_GL&V|X9R zu!x1vsq7ws({j7w$MJ*;_VOEp9^FCFU6i=c7+vScoPU5!~Q(3A0}-?Xu5%cf1e#Yu{s|$5+4U(ja06TsY4i-MbkzG z^a)_y`0x?xbf~#26wyUhaggbzsI{L|#IzuM_){5o7YXw&eDNY@iPeaq&aXU-YEqef zzzgt&fVW35{>Si$7m34=M~%#|zLPSYGL0qWl%mP=mRuZCcjXk&5x(yIlMxsTA#r1E z&Jgv`qf?OmE#)2}wsrWU3ZfRIS@w~Pc92?K5YkG0*(<{b z>cS+GAy)%myc|b)0TgwA`;#0;Gg}J*H%b#}&Lyww?CF?Wgy7xF4^o z(?EHS9pkLA`whmK3dyMKgR?PB+e7E~J@g+SAFhfcwl%SOABx+Gj+O>Nt*%Tv^+xJR zSoX)8d}?7pcryq{%XjB|Mci}yx;l~z-1tl;a$W_64MBbxfy$Uy7`67xSS6-1NN`xS zje(`F2ie&V1lcznj{nB`7cBURbB@n6Zf72x8LIK|-zTwovaqYYn`pK`p2c0mu7wU zD1^nQ_8ZNKqB0KR=pR@WQR>v1Wi;aBByM6_IkEd(yTbzkT8V^_=4KKyY)+obBw*|#3e+}wLbAld!u6RIp=uxD2oGOV?rozDW`z*u;g*hscVYcS zQB;222H__AfbQXnbw;g6qeYGO~21|jYRe=YFQ~!Bqzy7 zmCr)AKuxWQ0Sw-hRp;O9l{_L}>?4PRy)b%t^tZ~K2X+t9>xa%2||13cnNZ$^M~)g9+>O4DF|~#d5a(4aFF_9fZ%bl z+q3PAl!6&DH76ZimxG*_OQ=e5m%k0y#gJ|C@)``lzHD8G@ zKYNN)A+P;&Do+_68M*mO_&DpH`me7^GiZ}YnVUZJhJLuqQV&0egSu*xHXoUN6kKbi z+oRem6Y3J%0bx;AKgdymXrw!@$)8Bfx4M>@=jrdtwz8bgq~zUx-Nx>3&^9n~g7{wU zNbmp{;+}^T$Un^Q*aExn1x)3J{d6zC^m4vT)==K49LVqUTRc6E)``CN5}vH+k>}0x zK*$x&)%tIb@!;#QdDnK{O{x(suHEJYjv9lR6ewRzUl zHlNwm*plBOC_`r_g;c$`#f=la51`t$VPWx#Dy&2iog}&yIVnAy2`Fmmebwd*w#TI& zm3ZJ?mB5X!=eiXQV(gP}`lx$t9SYyRLC6mrdlwF~H+SsHJzY4*ue@^^TEi)r6FHG$ zGaW1)w%^y0>8%A*ESj%%DXCw!aLT zf}YtfvnTZKI$|2^+$P6-heS|IXwsw#+Gf3v*Qqn~;E0twy-%%^3qH4|#FH{8@j}yg zxF)i~B%-@7(MG6}x+mf_=zH%mz2l?+D$+?J%vMlTjWm)H=y7sxf@F*5S*_W2BBC3yLkZ>@UN!0_^7Np^u1+ zs=nZ!6!(?bimZUJQR+`-3aGtBcs-acziBv5QlJ!rZXt;>f*1gsmGhz3#ndBO?=NK zZ=1>WaqvtSKe6E?666Ds3oQV${>xD5OTEpI8!1rIL9Zr}(GbIsvzYA9y2@FKL?#ce zBnrOanGz|(^q>JB76CmdZSAi=dx7p!2}>-k^8)J1>W`o11TIacz;akLYCd+n5?$@= z7-?Rp!9PUD%NT>anz1V7I1B3>R>gfJx*8N6o!G@?v5m(ZU6RC^;WPE`!h$X0DqLH> z>jya?t^?6JUbe0B6>3x*U!neK!u8O>%WcS2ln;f6w+f|hva(^{{nHn6z!gH?TpCD! zy?u}qSdbCvUL;vJ-rVQcr?|*YQJ)j_=^c^Z(&~L|rI=Cg zewj9QcixfEmsgaR8;cJ+@auP11w*{#dcFcLgdv@m1KBpXBaPuZAzVco1f{=} z%dsrW{nN#14W>%^ikyV?(|q$=YySb%lenZH;$zS_6sj=_+7sbKDP0u{u$2gqwPOb# zX97{0rD)14H!-d!_nI#XcNfs)Z01U3Ie&ta`8_2m3^BS0UY%zkN&sb-dQrZD?E!>W zYYFQnV;%x?M!l!|J0PEL?dND~sqffRSfqKi8M0npDQ|iIRI0s%L}iWm*R&_1B|GXc zbDnn-3b-b?cLWExkmxEELR$EGmKs|OZ){ot$vcQV`#31+Mpaxna=2IR5 zv?8cFFpjhhHo_#gDpatiiaWp|3DOXXaZera?%JyH?9+e>ZK4IxakUG&VJ?TnBgo;CYC>a9D4!Z+e}rZP2hCRMUE+1*@SrC; zYK`b_pn89t+OC4yb0`ki>z9LW*aS(O=E{uf^9o18q~SN4=Y4l`K2^ltMd241*W5{8 z{a+TEv116%MO*})l%46Kz3#k}$}`I3ToxO$V9C(LznI|-9;ehEmM zG@FR(JGb%~&NfPx3Lq^pn-+SVz1O=*#07XjwSrpv=IMcaps z#=}lcnufv}e2h?$4C0ps{#*~&B_sHH{5avInD<4QbiA<9QJv9x+Mbu5YT)K+Co~3v zH&X!iq2D%{nlkVn7IJO#`~(@~n?E;ivQ_IEZ`^L?Xa9OOGuMHu|cu~<|ccsHh97_Spi0h7wv6*2oV^}W5;us+uKsq0?#fIIWPChw?3-UsUR z?pJb7cYIXD#_r)5w- zC1$B0^y5J^MPIpVjhO4D!Jmz+wV;=;8)^bYf5V+1;g~Cd%=o_$`!ObMo8=)B7guQo zI4c3>o-uM{-SjL;m$J;`io%1u3YAsrF%;n`@ud^bP1J-nf%m;5ZPjA0<4Gmsp9~l6 zt|v60RM;seV{OH++0NCR?}btMVh;LlIt61oNAu^u2?I#h4ggH; z=|T|1YHVJNE7cL=*k`u62ShQ~#VYGD-|3>?(A-;2lr#Up((#GUhR>ZTxc?sr-0HL( z$J&KEDV;(xFl{hYtG__oIJHl~S9Kt(sIQf|8Wqby&}_8mly|1 zK(A>niy!O3PUIwpC=+kCHMOYG7tPK|;i$iX?y`3(gm6D|Zu?_Oobx$eTG#KK)-HVM zIPY{;E;E;lAwhth9!zLDVD2``hV3d=05C_8y)l64zO_kL&D!t$!sQ!k zF>(Xj*Tk`sQVRUY`=E}@)HwC+;+w#Xz=2wNb6i_>!|yvyQ>!9wWIcETd`M$=&&2fY z{MVQ&?S5qo{0y1?&XnR69EQm+6hc7=UV*SU8KLV^UcF0nehP4K@TB6F+a_whE|+2} zo+GY!ff*s#I`TvOVt7_xK3295$)B7tyY=Seb!~EPQ>(zP&0(l)LM7+@h{O8Q;sri* zHEnnD+*JHBS#@e)3-x|>Xb7bZgTHdckgq*;EHm3oHHGcc6j>-&FK?Fzv*%T(b4Bxp z+)bspxcBJ^aUlXt{h^S`jf&z0;AgJ=*$!H6TqabPJ&IcqzoC-f=}#Yj-+tUw#@bgx z>YG{0!>DnyR4d82R{vfUiB-Y4`rt|yayq2I@s$a|(+IyUm<}|2HzRBx{J zKkY*gpTp76Cvi3ttTaQP9J3bJTzY(hNgKj(a)LbF( z5w+gY`RwGmBj3m%m>scqH@>kT@k7ht-2{Bj@slj^ZO|%2}M`#2gH!7*~7Vv?L~$YnTzsc0sLS$ zzPlq)Fnm4pneD*~r;}2-F24G>x`gUnrh?t3o2Lp}KrN^|MM{nv=6zC>?y#EL4cv$#lJ-{-_ z460h`xe*@)gjBBa;m44R-Da4aS#d`aw=iz_c-07nPbZN>L)M6K6M9cKv*y>U@2;{G`RBNr`jh0;?ve+WsT z9s0Y5=@6fPs!wqLL9m2H0&>sxwG%egCj3nY6c1b8Yv!iQ2!Fdm*UosI+kN z;(SocE&U<)Ev>ob;~E{8a}B%wYzUcd5(%Y7zk{+$7mG?4S7^3QtRb^pY+@D*Wb9NE zQC}<+V?R7jHn!yv*~y7RRrl}49pF~@b7J=D7{cTQDsApIvj?hpKH9CC?@wyR+)imQ zVi%;u)xW$6$G_M|4-x&nHSQ233%6))>QaSSpl)b#elv=j{CSq5c2(`KKNxZkWWepp zl_;FA?NV`p8qQQRN_+1(7{@jQ_t|v`k~&tlC;X4?yGqc+kJwNCWr(&^%IKRuk=&AS zyfI`o;N5(pVD@&!-8nohswp9QfabSacgveeG98X!lOL$oIN=>1vm{YlRUi2(YVoPB zV-xKDxLr?UgI%;Kf3|*^=5@eYM^}Ec227ASc{&d6;C-?mO7_Wc6wRvDu6XxSk6)A5 z8C=WUrFA!?PbO(99mPOm7C-6u=$Et;u-_4+q-fyI-+K&2qw8`cJ6tg9#M}3I9$8@% z*?H72mu~xMnHZ1&&=-FlVV2S0t9rbB3pH|js4Pu@12^SHfZ$?V0-q2v%j!=ZrSvtK zg0feZWVHs?DItG0?=%{@eE9gr0!g`-by; zp5aXD0D{_t_Q7$CGAv==AU**Xly*^B2jv*3U|$$hM)=m&S2eaZSyb2?4}2YP?nr*Dm>*^P*{K7D!UBl~a~+EAUBL4?u>G_YQRxvu z)wMe98xkQE@){=$_d(2S(qkV{Js-e5$R1rlpZose1QD1`D%mo`I6U z!~J%V@)w9x9P1rH=x&J%ke6B;&G&p#HF0S?nvyww% z#jH5=5M2aD&2I5(Pu3ZW@`m=I$FHE$V7B#6ViWRpCRbF@S3%s={cwWtKTwZTxso+v z>_vT=d1I5AOH!Ywh_!!L>@dj+x7H^&n2+czLVL{o60tq&*%)~#@0gnkaGl@`K!BPI zt<7qPgH=jHDYnLJmV=(GFRhGJt~Is15x1+0@xM(w#NRyR;LfoG5?eD9eqE`uf*}Y- z?xf;}R%A}h0g(==Iq9o0>w8`2ds|K|Pj1hM?bt9qO)+75ZJhh&%%a5nimg2)6%8S= zrs4!Y{xvH%?K@xCO3!_9>N#YOuyf4M_V^3DHg>MJeM1fvn2Z;S%T$*eiBt0k?Cf#Ja_Jrk32MkHIl!|3{WS|zZ52@ zldt255<|(?5BP2s&jr|R~*ZuvEf>hsPr?YF~&yO7xj5v}ar%9)B_&_qT2JywvAUa92O^P9Vo5 znQ2HM6+hFZTc3|@DUGNJds*L@XhuNNjNeRiV#qOBo-Q+&nNq8 zQ^JsL-Lt{IyLU_^JP)flxD)-9G?g^V=En&4`uklRzgqeYS){qDr*LYHJ)T3iVuhSP z=ThfoUP>=opH&rEvVZ|~G3Ads;kBA-LkUXClbcQ#*@fG82s&5`&lN=Z@;2-vguZTQ zD6ck5J$>wX!^8PO7%xI&eGoMGN?3=sjKVf_zO8n7teb&iiICBC0Az6t%bEheTIF2I z-?`Z3nsxjdxwX?t>Ot#$bRU7WD1QAx>xtAyU7J546S{*0vjpS3_a7wo_D|1rXs2vAsdKBvnh794KZ2@Zwo>)*S`Dh zNv?_Y-Q#wCkSW8Ahnh9xQ$HpyDKR|Ba`6h{H4-5I)JU+LlfYeadoVF}?{j=B|JOZ* zJ_tPw5QpB6HH}XZQ+&VDG<=U+uP(iA)J6kmoC~UD4v%BJ>GN7w_HwgMD2kJOKT!K1 zFF?97UQy2)=6xyV#2Bd%7dmS_tHII~|1i|^a7{%?*d}NBwVZw4g|m61;6u;#LLtG5 z8PplLjuRFx8mNi)HEy12<##C9a`y`+JK1x(YwU_4N-y1yy(Up&GW;h>P0!l)4{L)m zE$R8&U;)QdbVPKalWym79R0-B#7eIW0dcS=+VjyRiq$q^7p*9wVE|RAuYwMtfM}<7 zELQp6)~=Iy-xPi{$8~u9Nbi6{!#t_MO@BLr|JwGEH5^<9bZG-(ZQT~&6F=l{QIt!Z zGI7N#Ag$rONF}o|++O46XVD+3Uq|f>gt5`jL)v`q@xu6D@^u#A9D|5(sQ;vT$PwGk z1#J219(kKA&y$az>67p8oTq6sy(O@6xNmG`<10FTRQ8N{U4MvKi01BaNRQ1o?Gow; z7FZvY%WB*k157vVuJVyJSmfMVo zPJPW48Re#(!jAZXfYAn~vrE`Z#_^~x!k|@&gml#3B$`*2MyF~0q3*{!$r_k86gH<4 zLfwAPFO1C8c6o5oD@(jv@M)5E;_n|F1yC0s-5TyW>(HS034=C(@h=5X@LAvG(sw)#nP_?T7hx$4 zOTfSh-isuL6r=iUyOz9IFyRiQE9dIA&x{OEtn(HzwrAG1TSL#Q`cdH()Ng#g_s2(~ zUj9L4-SMIXMs0Grt~Qj*%*=S2-8%fTI<-(&NfA~E1fl{_AGn`|R?7`KQ`uA6cerY#H*7@+ldfj!GRA zJPwJcmuyuAFyI%fXN}P>PvjlDI3EQx0CL6X?v>SS+5@Uc8+>I4u>~C2jQHf955Ruc zMwSMSGiDBXjCCzmM4~tlYx=KPkC+}?Dhi%d6W9)%PCgTc@(EnM*>?$W_uNIl^~vrV zOOEoC+x!t3@9BWJm4?f_VLze5M~e~>{5GPGLT-fwz)kYQm-iJ~mpj&%mYX<+IyEx0 z&iDjm#U5_e%68NEi{7>ZG2B%+gKwQ#no0|c+QO98%Hp#ffGsG!ZQ9;e0(bGtc!~Vo zO5s>8&>-6OJ$+hW@-HPa0jmm=?K?STT-fy+ukRHYdr)=#{K`Mj)hY5gXAFs}nIKu> zNW=N3UcEQnH7}Ji3Fa&8pHkDKKE&tIa%*eWs`q)Z_Jl#$Nei9|k%3!VL&bRs*&evY z2e~Zg^4CqD)?DA;2NsqEw|I1BHU`S`oEKqV6}~z~y76k6HihSIMz3jbDt|?CK0$1< zJ0N^cKjl>Zd$M4EWBe8t0S;o4#Yk4;89MF5b=l=ndWgX9YI_hjX3NDCq!) zUHb;yMm`6Uk z*u&)HTh>Nih~Ib zDTk%G+PRe1CLujb^pFkW%YkJWtt`|1u59(QPvRjtXzSALC~Uy#EjYElaT_Qpkl5dho{E&P|Sjx3eb+^R|17FsIVOMjk+POqR(rYJw(cp`ZbTdm+0SkoO&HET=Y{b5Yf zzDShv884Hj6Wd;1%i62U12I^fd2*dMgw^ z*?7k~dECX~NfLfQRmE~1ZCPexXA=bsP_+6_F-3O>7jP!UDaqsKEbUo1?aT9K4Yi+# zTu1mmYrFPy%-w$h6r#l*TXDVpDa*1Z3Gd_wzCQo;WB`B02i}%Zm@VTN}rvK483N{M^QiC_XTq7vcAN_*=`Ii*l&y zxVrET_b@()mwY`Q4}RJhqXmyR7vFnnz?b50quk5+q)aJ_7u{C-7=IBNE~RB5qg7oC zgv0D9Tux@jhU}s^y$?|_mrFuAKp^2YmM8z4?fRe3AXnko!^P`=#iMdA<;MB6k+aGu z?#UWYaENl${sX}yr~oD%>IRH&(%D=qHR7v7@;36uR6&|H9e}>E(WKJsh}gYk&?aP73E%412CQp zzt&#S25RLt5u+|1;pRv^7kScN0#`Jotsfi$V0D|Va@g=`l8yuYx}Ag38Jp*opMr%% zxeA$n!|FM|5@y&PJDPB-2PRK%6wVZu^L6GnXmX?_2Rkb4v7fu^j(FGtX{n69nr4By zX0wp7>%vbORyn@OyN$wf`ojVCc}xN|D52M34OFP7rXqo`n+QKh>e;q&er#MwONH#N z(S5VQpq$>BU-3tqyE7nmXGDvV zm?d1!QgEll$dS{Kje}m0tEr!n?sVO}LO4-5$J*N?<O+OKuEIM(o~GUVl>4@3M#n-gLdFz6+fI`mUo{qp8VPcQw7|1JxNmwQi-&tU>3 zr;u-LHCADDygej4sOvbOZ{6rkEch(h+4@ibWA=kg?@qK9o7bt$k)qpLjOP;IXznIq~i+(66E=Xd4aB; z>P^sp`MN~F0O)*}-z%agwxP3hOhAsaU;nqR#!yOppwCC#_Sy;xv{%P|T%7&Z6g`Kk zvoka?E?`k#_(_$S^YZrvJ-l=20Eyah$FCpW9&u-g1~hT*+1&HHE)p^@_G@fTo{IgF`*_PD1_X*B{*E z!@_p7J)8Nzv@rm$2`N599((^7k)vQ>1ImKcNm)z_3tO(Y9 z?uUm|fg8w2(?h$GW@^(XBI|uy?zA@R81x?0Cl_vavstx+9*#xpXG`iHJ`Xtlfqc2o-7OfxEy1GM>wSya z)9zf!kF(#@WZH^Jj{0-kscatpzKTO?%VOx7hQ#Y1ove~s`Y^NRZ&Pdh4Tq#8Mf|HS za|MJ9UCP8!l2MWQ?>x=&tgTP?Psus#y(H_+(yE%d!|-@$j?C#vh%H$D#}p z6XoBkT90<6b!z%sl%H)GbN}Ty-rhH}yhF&6LOaYZH`+HCEq(6Ee-nFzpx3hDqfLrI zmig&Vud+|b&eeu{T=U`yqoO)^wTlQzhlM2e3EE%aSY***=Q#mloB$((p)S5|`|{zY z(U3k!jp8;>VS+_{gQ6R{MSL*4{Y6L%?E9G9=Fh&M&IA#i_7Yuq0eRvP z*sZQTucU6@8_CYuKU8_zHcfXJBqkM~)tm9Qe&BQVk;*s~_RM_HvE@GMe!Q(&0z}^S zEn?-TKNmXObY%J8dr?#Zm474<2FL`@$w=P!2&5nsuT`HlI1a`7Lf(_e$(teoDjjlB zB3@3ZOQIko-F~h6te&w?h0;q5S9Gk@wEN{3Si)@71|q|IYwY>hlpTVg&C)fDYGdk_ zx?N>%g)Qpb{-eUqu6QH35K6d<*|iRm|45*~{V{1#^w|QPpEX`M>Ccd_84=AEYIX^9 zE9;A4M@x>?8%ohm-{bq)zne28JUdC6{gx#z&}erj=cj^M(u`+TM{y?wjAOI2;A%rt zcwA3FTtB;R!e`y{y@c6=SqHEw@likd8UxYB`~chmz2V|~0q|-5xNnfp+gYjs)?XW@ zUh10S{)hAL`|$)VMOpYMuiCdjk(+F+Z&(t<*N`7$1ydtbH>mUTt*Dg3AE0Zro7nV> zCtmTrFCUKqgvbTJQ62j5$aJC>4nktIIVm9A!S5RaK2VvGP=HYx|E2A%6j7YFbvR#O z5ZDc~^Of!v-nc)+@%r)Tnx0AI&wk_j?CrsrrL#Qi&;krM+3Ov5!P8AVf2$L%Y2x!@ zWWEUJM&{}zAvvI!z}WwEx{~0tryyh#?y_#MV5;6IG+%xC*g!DkPk{S$d(}k_;B!8K z>o#`P@e`On9y-F)QuDX+Vc=SwlBGFEI-dtzf$obVH{+SFa@iROEdUBMRQHH)fSgZ+ zEF0Xh#4rIMhGw1B1P86@eMoItp7xurv%IfrhhOGlQsKd`Z5m_Uu6nqueIK&v6ht{R zotgMl7H{iYLiaw|v#k+ZLGA#mA82OdBxgu`(x4dCnIGR%e=6Y;Zg2I{W1!AvGu6=%vS7@P4%5IO` zG_aD`2k)dWmTEUk`7N-*zCLjFP=YW#cRnYf+Y7HT1=iy;g67)^aszUI1r-e-H}V4P zCi&LY>;(B=J_f*$^39jO9&Is2?cx&hY>g9F229Gw_OXR`gS(+wvyWx`Ug`$_35SKcK9_OGKxT;>$J z(Bl8vW&f`(-bkc~bRDl;y#n1W9lJ^}+&30q4{CQ2SklUx8x8ErsLl3F-zxe>kss^{ z?;J)|p8{;IcbHix)nS zQo39@Jvu%6A1wLt{2Qr7f10OL-R6W-PxK#~Q-m6M#A45l_)B`>xtpKacaZFR!Pb(^ z#UGFQ7HARjtJzNHfZGYnZGCuB$wlI8Pc!?Oq&@Y`(8|YE(9!r@i{??Q}=y9sUW!b^LG`TLsp!}uTH|>!Zi70FaiWBvg zCQjf82%Bkw?>IHT%y(Z^DKYtDq+Os8Ijhn-d;5h9t?6TCDtC5)LV`=7@!V$pw%d5A zn93sJ>@F&ApKyEcYqKwjX@7ZJ?9syFyTe%ctl=*F#B@wz(2yyy*w<&*8hbE`RHt#7 zI*p$tVqXOh!)s=MzUIh7b5(E8Wl`#xm(AG%_AyQ$WBo_NKe$9_uc?5-ZyV+5sroq- z{AWt||NGwKABcr~-A@LGio{I>x-3H(2(>R_bmSE*pgJ*!LKyai(z~CzC}RPp5m3}#5M9fkBy}3xUl68`C|AA#UpHGeQ<;!mV z8?iIv{TvZ(i?2q`+YH+&j>iDHLqo$PFuqOv^4u1y;Y`BzuXl#74UA=BYgO598qTL5 z-k^RADF}HHy(5-{mZO8W)V>?M$6pDC!#nSyu%F>HWDo(?3Fo*^()7pedKyny|2|eY zpsi. - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(Team Overlord/TimMoore)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_OVERLORD -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Overlord" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -#define PSU_CONTROL -#define PSU_NAME "OVERLORD" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH true // Set 'false' for ATX, 'true' for X-Box - - #define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - #define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - //#define AUTO_POWER_CHAMBER_FAN - #define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 201 -#define TEMP_SENSOR_1 201 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 0 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 245 // lower max temp since updated nozzle is a E3D V6 lite clone -#define HEATER_1_MAXTEMP 245 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 160 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Overlord with new nozzle with integrated probe, update using M303 - #define DEFAULT_Kp 8.62 - #define DEFAULT_Ki 0.55 - #define DEFAULT_Kd 33.89 - - // Ultimaker - //#define DEFAULT_Kp 22.2 - //#define DEFAULT_Ki 1.08 - //#define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //Overlord Pro heater into 5.5mm aluminium bed, update using M303 - #define DEFAULT_bedKp 253.16 - #define DEFAULT_bedKi 24.14 - #define DEFAULT_bedKd 663.66 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - //#define DEFAULT_bedKp 10.00 - //#define DEFAULT_bedKi .023 - //#define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Delta Settings ============================= -//=========================================================================== -// Enable DELTA kinematics and most of the default configuration for Deltas -#define DELTA - -#if ENABLED(DELTA) - - // Make delta curves from many straight lines (linear interpolation). - // This is a trade-off between visible corners (not enough segments) - // and processor overload (too many expensive sqrt calls). - #define DELTA_SEGMENTS_PER_SECOND 200 - - // After homing move down to a height where XY movement is unconstrained - #define DELTA_HOME_TO_SAFE_ZONE - - // Delta calibration menu - // uncomment to add three points calibration menu option. - // See http://minow.blogspot.com/index.html#4918805519571907051 - #define DELTA_CALIBRATION_MENU - - // uncomment to add G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results) - #define DELTA_AUTO_CALIBRATION - - // NOTE NB all values for DELTA_* values MUST be floating point, so always have a decimal point in them - - #if ENABLED(DELTA_AUTO_CALIBRATION) - // set the default number of probe points : n*n (1 -> 7) - #define DELTA_CALIBRATION_DEFAULT_POINTS 4 - #endif - - #if EITHER(DELTA_AUTO_CALIBRATION, DELTA_CALIBRATION_MENU) - // Set the steprate for papertest probing - #define PROBE_MANUALLY_STEP 0.05 // (mm) - #endif - - // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). - #define DELTA_PRINTABLE_RADIUS 75.0 // (mm) Overlord - - // Center-to-center distance of the holes in the diagonal push rods. - #define DELTA_DIAGONAL_ROD 206.0 // (mm) Overlord - - // Distance between bed and nozzle Z home position - #define DELTA_HEIGHT 186.14 // (mm) Overlord - Update this value using G33 auto calibrate - - #define DELTA_ENDSTOP_ADJ { -0.33, 0.0, -0.85 } // Update these values using G33 auto calibrate - - // Horizontal distance bridged by diagonal push rods when effector is centered. - #define DELTA_RADIUS 100.63 // (mm) Overlord - Update this value using G33 auto calibrate - - // Trim adjustments for individual towers - // tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0 - // measured in degrees anticlockwise looking from above the printer - #define DELTA_TOWER_ANGLE_TRIM { 0.69, 0.0, -0.70 } // Update these values using G33 auto calibrate - - // Delta radius and diagonal rod adjustments (mm) - #define DELTA_RADIUS_TRIM_TOWER { 0.0, 0.0, 0.0 } - #define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 } - -#endif - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -//#define USE_XMIN_PLUG -//#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -#define USE_XMAX_PLUG -#define USE_YMAX_PLUG -#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -#define X_DRIVER_TYPE DRV8825 -#define Y_DRIVER_TYPE DRV8825 -#define Z_DRIVER_TYPE DRV8825 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE DRV8825 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -// variables to calculate steps -#define XYZ_FULL_STEPS_PER_ROTATION 100 -#define XYZ_MICROSTEPS 32 -#define XYZ_BELT_PITCH 2.03 -#define XYZ_PULLEY_TEETH 20 -// delta speeds must be the same on xyz -#define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH)) - // Extruder steps per unit from calibration -#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 67.394} - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 100, 100, 100, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 1000, 1000, 1000, 3000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK DEFAULT_XJERK - #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN // Overlord with Nozzle upgrade with integrated probe - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -/** - * Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe - * Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN. - */ -//#define Z_PROBE_ALLEN_KEY - -#if ENABLED(Z_PROBE_ALLEN_KEY) - // 2 or 3 sets of coordinates for deploying and retracting the spring loaded touch probe on G29, - // if servo actuated touch probe is not defined. Uncomment as appropriate for your printer/probe. - - #define Z_PROBE_ALLEN_KEY_DEPLOY_1 { 30.0, DELTA_PRINTABLE_RADIUS, 100.0 } - #define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE XY_PROBE_SPEED - - #define Z_PROBE_ALLEN_KEY_DEPLOY_2 { 0.0, DELTA_PRINTABLE_RADIUS, 100.0 } - #define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE (XY_PROBE_SPEED)/10 - - #define Z_PROBE_ALLEN_KEY_DEPLOY_3 { 0.0, (DELTA_PRINTABLE_RADIUS) * 0.75, 100.0 } - #define Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE XY_PROBE_SPEED - - #define Z_PROBE_ALLEN_KEY_STOW_1 { -64.0, 56.0, 23.0 } // Move the probe into position - #define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE XY_PROBE_SPEED - - #define Z_PROBE_ALLEN_KEY_STOW_2 { -64.0, 56.0, 3.0 } // Push it down - #define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (XY_PROBE_SPEED)/10 - - #define Z_PROBE_ALLEN_KEY_STOW_3 { -64.0, 56.0, 50.0 } // Move it up to clear - #define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE XY_PROBE_SPEED - - #define Z_PROBE_ALLEN_KEY_STOW_4 { 0.0, 0.0, 50.0 } - #define Z_PROBE_ALLEN_KEY_STOW_4_FEEDRATE XY_PROBE_SPEED - -#endif // Z_PROBE_ALLEN_KEY - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0.65 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 5 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 4000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST (HOMING_FEEDRATE_Z / 2) - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 10) // Slow 2nd probe down a lot, seems to give better results with the Overlord nozzle probe - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 15 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 15 // Z Clearance between multiple probes -#define Z_AFTER_PROBING 15 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -4 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR false -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR 1 // deltas always home to max -#define Y_HOME_DIR 1 -#define Z_HOME_DIR 1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE ((DELTA_PRINTABLE_RADIUS) * 2) -#define Y_BED_SIZE ((DELTA_PRINTABLE_RADIUS) * 2) - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS -(DELTA_PRINTABLE_RADIUS) -#define Y_MIN_POS -(DELTA_PRINTABLE_RADIUS) -#define Z_MIN_POS 0 -#define X_MAX_POS DELTA_PRINTABLE_RADIUS -#define Y_MAX_POS DELTA_PRINTABLE_RADIUS -#define Z_MAX_POS MANUAL_Z_HOME_POS - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -#define MANUAL_Z_HOME_POS DELTA_HEIGHT // Distance between the nozzle to printbed after homing - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -//#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (100*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h deleted file mode 100644 index 5b05f9712b..0000000000 --- a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h +++ /dev/null @@ -1,2932 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 5 // deltas need the same for all three axes -#define HOMING_BUMP_DIVISOR { 10, 10, 10 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -// (don't use SLOWDOWN with DELTA because DELTA generates hundreds of segments per second) -//#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE_XYZ 50*60 - #define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 3 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - #define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - #define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 35 // User defined RED value - #define LED_USER_PRESET_GREEN 35 // User defined GREEN value - #define LED_USER_PRESET_BLUE 35 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - #define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - #define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - #define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss (optional) - #define POWER_LOSS_STATE LOW // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - #define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - #define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 10 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 10 - #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - #define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 1 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - #define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - #define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/delta/Dreammaker/Overlord/_Bootscreen.h b/config/examples/delta/Dreammaker/Overlord/_Bootscreen.h deleted file mode 100644 index 0079deae31..0000000000 --- a/config/examples/delta/Dreammaker/Overlord/_Bootscreen.h +++ /dev/null @@ -1,35 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#define CUSTOM_BOOTSCREEN_BMPWIDTH 80 - -const uint8_t custom_start_bmp[] PROGMEM = { - B00000011,B10000011,B00001101,B11111101,B11111000,B11000000,B00011100,B00011111,B10001111,B11000000, - B00011111,B11100011,B00001101,B11111101,B11111110,B11000000,B11111111,B00011111,B11001111,B11110000, - B00011100,B01100011,B00001101,B10000001,B10001110,B11000000,B11100011,B00011001,B11001100,B01110000, - B00011100,B01110011,B00001101,B10000001,B10001110,B11000000,B11100011,B10011000,B11001100,B00111000, - B00011000,B01110001,B10011001,B11111001,B10001110,B11000000,B11000011,B10011001,B11001100,B00011000, - B00011000,B01110001,B10011001,B11111001,B11111100,B11000000,B11000011,B10011111,B11001100,B00011000, - B00011000,B01110001,B11111001,B10000001,B11111000,B11000000,B11000011,B10011111,B10001100,B00111000, - B00011111,B11100000,B11110001,B11111101,B10001100,B11111100,B11111111,B00011001,B11001111,B11110000, - B00001111,B11000000,B11110001,B11111101,B10001100,B11111100,B01111110,B00011001,B11001111,B11100000, - B00000011,B10000000,B01100001,B11111101,B10001110,B11111100,B00011100,B00011000,B11001111,B11000000 -}; diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h deleted file mode 100644 index 99fbf03c36..0000000000 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration.h +++ /dev/null @@ -1,2345 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(Team Overlord/TimMoore)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_OVERLORD -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Overlord Pro" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -#define PSU_CONTROL -#define PSU_NAME "OVERLORD" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH true // Set 'false' for ATX, 'true' for X-Box - - #define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - #define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - //#define AUTO_POWER_CHAMBER_FAN - #define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 201 -#define TEMP_SENSOR_1 201 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 245 // lower max temp since updated nozzle is a E3D V6 lite clone -#define HEATER_1_MAXTEMP 245 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 115 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 160 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Overlord Pro with new nozzle with integrated probe, update using M303 - #define DEFAULT_Kp 8.62 - #define DEFAULT_Ki 0.55 - #define DEFAULT_Kd 33.89 - - // Ultimaker - //#define DEFAULT_Kp 22.2 - //#define DEFAULT_Ki 1.08 - //#define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current -#if TEMP_SENSOR_BED != 0 - /* - * For Overlord Pro, the default PSU isn't powerful to run hotend/bed/etc. - * Problem is Hotend heater is 24V 60W, Bed is 24V 160W, Standard Overlord Pro PSU is 24V 220.8W - * Hotend and bed are PWMed to keep their average power less than the max power but they can both be on at the same time. - * If both are on at the same time, then there is no power available for anything else - * and power supply will shutdown if steppers are moving while both hotend and bed are on - * Recommend upgrade PSU - * A Meanwell RSP-500-24 works, a RSP-350-24 should work but has not been tested - */ - #error "Overlord Pro needs larger PSU than stock PSU, comment out this line if you have a larger PSU, otherwise set TEMP_SENSOR_BED to 0" -#endif - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //Overlord Pro heater into 5.5mm aluminium bed, update using M303 - #define DEFAULT_bedKp 253.16 - #define DEFAULT_bedKi 24.14 - #define DEFAULT_bedKd 663.66 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - //#define DEFAULT_bedKp 10.00 - //#define DEFAULT_bedKi .023 - //#define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Delta Settings ============================= -//=========================================================================== -// Enable DELTA kinematics and most of the default configuration for Deltas -#define DELTA - -#if ENABLED(DELTA) - - // Make delta curves from many straight lines (linear interpolation). - // This is a trade-off between visible corners (not enough segments) - // and processor overload (too many expensive sqrt calls). - #define DELTA_SEGMENTS_PER_SECOND 200 - - // After homing move down to a height where XY movement is unconstrained - #define DELTA_HOME_TO_SAFE_ZONE - - // Delta calibration menu - // uncomment to add three points calibration menu option. - // See http://minow.blogspot.com/index.html#4918805519571907051 - #define DELTA_CALIBRATION_MENU - - // uncomment to add G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results) - #define DELTA_AUTO_CALIBRATION - - // NOTE NB all values for DELTA_* values MUST be floating point, so always have a decimal point in them - - #if ENABLED(DELTA_AUTO_CALIBRATION) - // set the default number of probe points : n*n (1 -> 7) - #define DELTA_CALIBRATION_DEFAULT_POINTS 4 - #endif - - #if EITHER(DELTA_AUTO_CALIBRATION, DELTA_CALIBRATION_MENU) - // Set the steprate for papertest probing - #define PROBE_MANUALLY_STEP 0.05 // (mm) - #endif - - // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). - #define DELTA_PRINTABLE_RADIUS 85.0 // (mm) Overlord Pro - - // Center-to-center distance of the holes in the diagonal push rods. - #define DELTA_DIAGONAL_ROD 206.0 // (mm) Overlord Pro - - // Distance between bed and nozzle Z home position - #define DELTA_HEIGHT 286.14 // (mm) Overlord Pro - Update this value using G33 auto calibrate - - #define DELTA_ENDSTOP_ADJ { -0.33, 0.0, -0.85 } // Update these values using G33 auto calibrate - - // Horizontal distance bridged by diagonal push rods when effector is centered. - #define DELTA_RADIUS 100.63 // (mm) Overlord Pro - Update this value using G33 auto calibrate - - // Trim adjustments for individual towers - // tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0 - // measured in degrees anticlockwise looking from above the printer - #define DELTA_TOWER_ANGLE_TRIM { 0.69, 0.0, -0.70 } // Update these values using G33 auto calibrate - - // Delta radius and diagonal rod adjustments (mm) - #define DELTA_RADIUS_TRIM_TOWER { 0.0, 0.0, 0.0 } - #define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 } - -#endif - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -//#define USE_XMIN_PLUG -//#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -#define USE_XMAX_PLUG -#define USE_YMAX_PLUG -#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -#define X_DRIVER_TYPE DRV8825 -#define Y_DRIVER_TYPE DRV8825 -#define Z_DRIVER_TYPE DRV8825 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE DRV8825 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -// variables to calculate steps -#define XYZ_FULL_STEPS_PER_ROTATION 100 -#define XYZ_MICROSTEPS 32 -#define XYZ_BELT_PITCH 2.03 -#define XYZ_PULLEY_TEETH 20 -// delta speeds must be the same on xyz -#define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH)) - // Extruder steps per unit from calibration -#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 67.394} - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 100, 100, 100, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 1000, 1000, 1000, 3000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK DEFAULT_XJERK - #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN // Overlord Pro with Nozzle upgrade with integrated probe - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -/** - * Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe - * Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN. - */ -//#define Z_PROBE_ALLEN_KEY - -#if ENABLED(Z_PROBE_ALLEN_KEY) - // 2 or 3 sets of coordinates for deploying and retracting the spring loaded touch probe on G29, - // if servo actuated touch probe is not defined. Uncomment as appropriate for your printer/probe. - - #define Z_PROBE_ALLEN_KEY_DEPLOY_1 { 30.0, DELTA_PRINTABLE_RADIUS, 100.0 } - #define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE XY_PROBE_SPEED - - #define Z_PROBE_ALLEN_KEY_DEPLOY_2 { 0.0, DELTA_PRINTABLE_RADIUS, 100.0 } - #define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE (XY_PROBE_SPEED)/10 - - #define Z_PROBE_ALLEN_KEY_DEPLOY_3 { 0.0, (DELTA_PRINTABLE_RADIUS) * 0.75, 100.0 } - #define Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE XY_PROBE_SPEED - - #define Z_PROBE_ALLEN_KEY_STOW_1 { -64.0, 56.0, 23.0 } // Move the probe into position - #define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE XY_PROBE_SPEED - - #define Z_PROBE_ALLEN_KEY_STOW_2 { -64.0, 56.0, 3.0 } // Push it down - #define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (XY_PROBE_SPEED)/10 - - #define Z_PROBE_ALLEN_KEY_STOW_3 { -64.0, 56.0, 50.0 } // Move it up to clear - #define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE XY_PROBE_SPEED - - #define Z_PROBE_ALLEN_KEY_STOW_4 { 0.0, 0.0, 50.0 } - #define Z_PROBE_ALLEN_KEY_STOW_4_FEEDRATE XY_PROBE_SPEED - -#endif // Z_PROBE_ALLEN_KEY - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0.65 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 5 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 4000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST (HOMING_FEEDRATE_Z / 2) - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 10) // Slow 2nd probe down a lot, seems to give better results with the Overlord nozzle probe - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 15 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 15 // Z Clearance between multiple probes -#define Z_AFTER_PROBING 15 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -4 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR true -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR 1 -#define Y_HOME_DIR 1 -#define Z_HOME_DIR 1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE ((DELTA_PRINTABLE_RADIUS) * 2) -#define Y_BED_SIZE ((DELTA_PRINTABLE_RADIUS) * 2) - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS -(DELTA_PRINTABLE_RADIUS) -#define Y_MIN_POS -(DELTA_PRINTABLE_RADIUS) -#define Z_MIN_POS 0 -#define X_MAX_POS DELTA_PRINTABLE_RADIUS -#define Y_MAX_POS DELTA_PRINTABLE_RADIUS -#define Z_MAX_POS MANUAL_Z_HOME_POS - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -#define MANUAL_Z_HOME_POS DELTA_HEIGHT - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Delta only homes to Z -#define HOMING_FEEDRATE_Z (100*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h deleted file mode 100644 index 522ba59457..0000000000 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h +++ /dev/null @@ -1,2933 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 5 // deltas need the same for all three axes -#define HOMING_BUMP_DIVISOR { 10, 10, 10 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -// (don't use SLOWDOWN with DELTA because DELTA generates hundreds of segments per second) -//#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE_XYZ 50*60 - #define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 3 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - #define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - #define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 35 // User defined RED value - #define LED_USER_PRESET_GREEN 35 // User defined GREEN value - #define LED_USER_PRESET_BLUE 35 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - #define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - #define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - #define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss (optional) - #define POWER_LOSS_STATE LOW // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - #define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - #define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 10 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 10 - - #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - #define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 1 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - #define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - #define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/_Bootscreen.h b/config/examples/delta/Dreammaker/Overlord_Pro/_Bootscreen.h deleted file mode 100644 index 0079deae31..0000000000 --- a/config/examples/delta/Dreammaker/Overlord_Pro/_Bootscreen.h +++ /dev/null @@ -1,35 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#define CUSTOM_BOOTSCREEN_BMPWIDTH 80 - -const uint8_t custom_start_bmp[] PROGMEM = { - B00000011,B10000011,B00001101,B11111101,B11111000,B11000000,B00011100,B00011111,B10001111,B11000000, - B00011111,B11100011,B00001101,B11111101,B11111110,B11000000,B11111111,B00011111,B11001111,B11110000, - B00011100,B01100011,B00001101,B10000001,B10001110,B11000000,B11100011,B00011001,B11001100,B01110000, - B00011100,B01110011,B00001101,B10000001,B10001110,B11000000,B11100011,B10011000,B11001100,B00111000, - B00011000,B01110001,B10011001,B11111001,B10001110,B11000000,B11000011,B10011001,B11001100,B00011000, - B00011000,B01110001,B10011001,B11111001,B11111100,B11000000,B11000011,B10011111,B11001100,B00011000, - B00011000,B01110001,B11111001,B10000001,B11111000,B11000000,B11000011,B10011111,B10001100,B00111000, - B00011111,B11100000,B11110001,B11111101,B10001100,B11111100,B11111111,B00011001,B11001111,B11110000, - B00001111,B11000000,B11110001,B11111101,B10001100,B11111100,B01111110,B00011001,B11001111,B11100000, - B00000011,B10000000,B01100001,B11111101,B10001110,B11111100,B00011100,B00011000,B11001111,B11000000 -}; diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration.h b/config/examples/delta/FLSUN/QQ-S/Configuration.h deleted file mode 100644 index bb25c630e4..0000000000 --- a/config/examples/delta/FLSUN/QQ-S/Configuration.h +++ /dev/null @@ -1,2336 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(AndersSahlman, QQ-S config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 3 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT_2 1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_MKS_ROBIN_MINI -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "FLSUN QQ-S" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 110 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - //#define DEFAULT_Kp 22.2 - //#define DEFAULT_Ki 1.08 - //#define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - - // FLSUN QQ-S, 200 C with 100% part cooling - #define DEFAULT_Kp 28.16 - #define DEFAULT_Ki 3.38 - #define DEFAULT_Kd 58.69 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - //#define DEFAULT_bedKp 10.00 - //#define DEFAULT_bedKi .023 - //#define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FLSUN QQ-S stock 1.6mm aluminium heater with 4mm lattice glass - #define DEFAULT_bedKp 325.10 - #define DEFAULT_bedKi 63.35 - #define DEFAULT_bedKd 417.10 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 800 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Delta Settings ============================= -//=========================================================================== -// Enable DELTA kinematics and most of the default configuration for Deltas -#define DELTA - -#if ENABLED(DELTA) - - // Make delta curves from many straight lines (linear interpolation). - // This is a trade-off between visible corners (not enough segments) - // and processor overload (too many expensive sqrt calls). - #define DELTA_SEGMENTS_PER_SECOND 200 - - // After homing move down to a height where XY movement is unconstrained - //#define DELTA_HOME_TO_SAFE_ZONE - - // Delta calibration menu - // uncomment to add three points calibration menu option. - // See http://minow.blogspot.com/index.html#4918805519571907051 - #define DELTA_CALIBRATION_MENU - - // uncomment to add G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results) - #define DELTA_AUTO_CALIBRATION - - // NOTE NB all values for DELTA_* values MUST be floating point, so always have a decimal point in them - - #if ENABLED(DELTA_AUTO_CALIBRATION) - // set the default number of probe points : n*n (1 -> 7) - #define DELTA_CALIBRATION_DEFAULT_POINTS 7 - #endif - - #if EITHER(DELTA_AUTO_CALIBRATION, DELTA_CALIBRATION_MENU) - // Set the steprate for papertest probing - #define PROBE_MANUALLY_STEP 0.05 // (mm) - #endif - - // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). - #define DELTA_PRINTABLE_RADIUS 130.0 // (mm) - - // Center-to-center distance of the holes in the diagonal push rods. - #define DELTA_DIAGONAL_ROD 280.0 // (mm) - - // Distance between bed and nozzle Z home position - #define DELTA_HEIGHT 372.00 // (mm) Get this value from G33 auto calibrate - - #define DELTA_ENDSTOP_ADJ { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate - - // Horizontal distance bridged by diagonal push rods when effector is centered. - #define DELTA_RADIUS 140.8 // (mm) Get this value from G33 auto calibrate - - // Trim adjustments for individual towers - // tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0 - // measured in degrees anticlockwise looking from above the printer - #define DELTA_TOWER_ANGLE_TRIM { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate - - // Delta radius and diagonal rod adjustments (mm) - //#define DELTA_RADIUS_TRIM_TOWER { 0.0, 0.0, 0.0 } - //#define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 } - -#endif - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -//#define USE_XMIN_PLUG -//#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG // a Z probe -#define USE_XMAX_PLUG -#define USE_YMAX_PLUG -#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -// delta speeds must be the same on xyz -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -// variables to calculate steps -#define XYZ_FULL_STEPS_PER_ROTATION 200 -#define XYZ_MICROSTEPS 16 -#define XYZ_BELT_PITCH 2 -#define XYZ_PULLEY_TEETH 16 - -// delta speeds must be the same on xyz -#define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH)) -#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 393 } // default steps per unit - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 200, 200, 200, 200 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 1000, 1000, 1000, 1000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK DEFAULT_XJERK - #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -/** - * Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe - * Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN. - */ -//#define Z_PROBE_ALLEN_KEY - -#if ENABLED(Z_PROBE_ALLEN_KEY) - // 2 or 3 sets of coordinates for deploying and retracting the spring loaded touch probe on G29, - // if servo actuated touch probe is not defined. Uncomment as appropriate for your printer/probe. - - #define Z_PROBE_ALLEN_KEY_DEPLOY_1 { 30.0, DELTA_PRINTABLE_RADIUS, 100.0 } - #define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE XY_PROBE_SPEED - - #define Z_PROBE_ALLEN_KEY_DEPLOY_2 { 0.0, DELTA_PRINTABLE_RADIUS, 100.0 } - #define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE (XY_PROBE_SPEED)/10 - - #define Z_PROBE_ALLEN_KEY_DEPLOY_3 { 0.0, (DELTA_PRINTABLE_RADIUS) * 0.75, 100.0 } - #define Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE XY_PROBE_SPEED - - #define Z_PROBE_ALLEN_KEY_STOW_1 { -64.0, 56.0, 23.0 } // Move the probe into position - #define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE XY_PROBE_SPEED - - #define Z_PROBE_ALLEN_KEY_STOW_2 { -64.0, 56.0, 3.0 } // Push it down - #define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (XY_PROBE_SPEED)/10 - - #define Z_PROBE_ALLEN_KEY_STOW_3 { -64.0, 56.0, 50.0 } // Move it up to clear - #define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE XY_PROBE_SPEED - - #define Z_PROBE_ALLEN_KEY_STOW_4 { 0.0, 0.0, 50.0 } - #define Z_PROBE_ALLEN_KEY_STOW_4_FEEDRATE XY_PROBE_SPEED - -#endif // Z_PROBE_ALLEN_KEY - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 20 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 4000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 10) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -#define MULTIPLE_PROBING 3 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 30 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -#define Z_AFTER_PROBING 30 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR false -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR 1 // deltas always home to max -#define Y_HOME_DIR 1 -#define Z_HOME_DIR 1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE ((DELTA_PRINTABLE_RADIUS) * 2) -#define Y_BED_SIZE ((DELTA_PRINTABLE_RADIUS) * 2) - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS -(DELTA_PRINTABLE_RADIUS) -#define Y_MIN_POS -(DELTA_PRINTABLE_RADIUS) -#define Z_MIN_POS 0 -#define X_MAX_POS DELTA_PRINTABLE_RADIUS -#define Y_MAX_POS DELTA_PRINTABLE_RADIUS -#define Z_MAX_POS MANUAL_Z_HOME_POS - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - //#define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - // Works best with 5 or more points in each dimension. - #define GRID_MAX_POINTS_X 9 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -#define Z_PROBE_END_SCRIPT "G0 Z30 F12000\n G0 X0 Y0 Z30" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -#define MANUAL_Z_HOME_POS DELTA_HEIGHT // Distance between the nozzle to printbed after homing - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Delta only homes to Z -#define HOMING_FEEDRATE_Z (50*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -//#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -//#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -//#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 200 -#define PREHEAT_1_TEMP_BED 60 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "PETG" -#define PREHEAT_2_TEMP_HOTEND 235 -#define PREHEAT_2_TEMP_BED 80 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { 0, 0, 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT -#define SDIO_SUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 75 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 100 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 1 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h deleted file mode 100644 index d1e827aa51..0000000000 --- a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h +++ /dev/null @@ -1,2933 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 5 // deltas need the same for all three axes -#define HOMING_BUMP_DIVISOR { 10, 10, 10 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 60 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -// (don't use SLOWDOWN with DELTA because DELTA generates hundreds of segments per second) -//#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE_XYZ 50*60 - #define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 1 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 40 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 800 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 40 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 700 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - #define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 150 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - #define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration.h deleted file mode 100644 index ae462aec91..0000000000 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration.h +++ /dev/null @@ -1,2338 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(LVD, FLSUN-AC)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_13_EFB -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "FLSUN Kossel" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 5 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 5 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 5 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 1 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 250 -#define HEATER_1_MAXTEMP 250 -#define HEATER_2_MAXTEMP 250 -#define HEATER_3_MAXTEMP 250 -#define HEATER_4_MAXTEMP 250 -#define HEATER_5_MAXTEMP 250 -#define BED_MAXTEMP 115 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - //#define DEFAULT_Kp 22.2 - //#define DEFAULT_Ki 1.08 - //#define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - - //E3D with 30MM fan - #define DEFAULT_Kp 24.77 - #define DEFAULT_Ki 1.84 - #define DEFAULT_Kd 83.61 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - //#define DEFAULT_bedKp 10.00 - //#define DEFAULT_bedKi .023 - //#define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - //D-force - #define DEFAULT_bedKp 22.97 - #define DEFAULT_bedKi 3.76 - #define DEFAULT_bedKd 29.2 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 300 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Delta Settings ============================= -//=========================================================================== -// Enable DELTA kinematics and most of the default configuration for Deltas -#define DELTA - -#if ENABLED(DELTA) - - // Make delta curves from many straight lines (linear interpolation). - // This is a trade-off between visible corners (not enough segments) - // and processor overload (too many expensive sqrt calls). - #define DELTA_SEGMENTS_PER_SECOND 160 - - // After homing move down to a height where XY movement is unconstrained - //#define DELTA_HOME_TO_SAFE_ZONE - - // Delta calibration menu - // uncomment to add three points calibration menu option. - // See http://minow.blogspot.com/index.html#4918805519571907051 - //#define DELTA_CALIBRATION_MENU - - // uncomment to add G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results) - #define DELTA_AUTO_CALIBRATION - - // NOTE NB all values for DELTA_* values MUST be floating point, so always have a decimal point in them - - #if ENABLED(DELTA_AUTO_CALIBRATION) - // set the default number of probe points : n*n (1 -> 7) - #define DELTA_CALIBRATION_DEFAULT_POINTS 4 - #endif - - #if EITHER(DELTA_AUTO_CALIBRATION, DELTA_CALIBRATION_MENU) - // Set the steprate for papertest probing - #define PROBE_MANUALLY_STEP 0.05 // (mm) - #endif - - // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). - #define DELTA_PRINTABLE_RADIUS 85.0 // (mm) - - // Center-to-center distance of the holes in the diagonal push rods. - #define DELTA_DIAGONAL_ROD 218.0 // (mm) - - // Distance between bed and nozzle Z home position - #define DELTA_HEIGHT 295.00 // (mm) Get this value from G33 auto calibrate - - #define DELTA_ENDSTOP_ADJ { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate - - // Horizontal distance bridged by diagonal push rods when effector is centered. - #define DELTA_RADIUS 101.0 // (mm) Get this value from G33 auto calibrate - - // Trim adjustments for individual towers - // tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0 - // measured in degrees anticlockwise looking from above the printer - #define DELTA_TOWER_ANGLE_TRIM { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate - - // Delta radius and diagonal rod adjustments (mm) - //#define DELTA_RADIUS_TRIM_TOWER { 0.0, 0.0, 0.0 } - //#define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 } - -#endif - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -//#define USE_XMIN_PLUG -//#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -#define USE_XMAX_PLUG -#define USE_YMAX_PLUG -#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -// delta speeds must be the same on xyz -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -// variables to calculate steps -#define XYZ_FULL_STEPS_PER_ROTATION 200 -#define XYZ_MICROSTEPS 16 -#define XYZ_BELT_PITCH 2 -#define XYZ_PULLEY_TEETH 16 - -// delta speeds must be the same on xyz -#define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH)) -#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 100 } // default steps per unit for Kossel (GT2, 20 tooth) - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 200, 200, 200, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 4000, 4000, 4000, 4000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK DEFAULT_XJERK - #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -/** - * Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe - * Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN. - */ -//#define Z_PROBE_ALLEN_KEY - -#if ENABLED(Z_PROBE_ALLEN_KEY) - // 2 or 3 sets of coordinates for deploying and retracting the spring loaded touch probe on G29, - // if servo actuated touch probe is not defined. Uncomment as appropriate for your printer/probe. - - // Kossel Mini - #define Z_PROBE_ALLEN_KEY_DEPLOY_1 { 30.0, DELTA_PRINTABLE_RADIUS, 100.0 } - #define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE XY_PROBE_SPEED - - #define Z_PROBE_ALLEN_KEY_DEPLOY_2 { 0.0, DELTA_PRINTABLE_RADIUS, 100.0 } - #define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE (XY_PROBE_SPEED)/10 - - #define Z_PROBE_ALLEN_KEY_DEPLOY_3 { 0.0, (DELTA_PRINTABLE_RADIUS) * 0.75, 100.0 } - #define Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE XY_PROBE_SPEED - - #define Z_PROBE_ALLEN_KEY_STOW_DEPTH 20 - // Move the probe into position - #define Z_PROBE_ALLEN_KEY_STOW_1 { -64.0, 56.0, 23.0 } - #define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE XY_PROBE_SPEED - // Move the nozzle down further to push the probe into retracted position. - #define Z_PROBE_ALLEN_KEY_STOW_2 { -64.0, 56.0, 23.0-(Z_PROBE_ALLEN_KEY_STOW_DEPTH) } - #define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (XY_PROBE_SPEED)/10 - // Raise things back up slightly so we don't bump into anything - #define Z_PROBE_ALLEN_KEY_STOW_3 { -64.0, 56.0, 23.0+(Z_PROBE_ALLEN_KEY_STOW_DEPTH) } - #define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE (XY_PROBE_SPEED)/2 - - #define Z_PROBE_ALLEN_KEY_STOW_4 { 0.0, 0.0, 23.0+(Z_PROBE_ALLEN_KEY_STOW_DEPTH) } - #define Z_PROBE_ALLEN_KEY_STOW_4_FEEDRATE XY_PROBE_SPEED - -#endif // Z_PROBE_ALLEN_KEY - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0.10 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 20 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 5000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST) / 6 - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 2 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 2 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR true -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -#define Z_HOMING_HEIGHT 15 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR 1 // deltas always home to max -#define Y_HOME_DIR 1 -#define Z_HOME_DIR 1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE ((DELTA_PRINTABLE_RADIUS) * 2) -#define Y_BED_SIZE ((DELTA_PRINTABLE_RADIUS) * 2) - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS -(DELTA_PRINTABLE_RADIUS) -#define Y_MIN_POS -(DELTA_PRINTABLE_RADIUS) -#define Z_MIN_POS 0 -#define X_MAX_POS DELTA_PRINTABLE_RADIUS -#define Y_MAX_POS DELTA_PRINTABLE_RADIUS -#define Z_MAX_POS MANUAL_Z_HOME_POS - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -//#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - //#define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - // Works best with 5 or more points in each dimension. - #define GRID_MAX_POINTS_X 7 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -#define MANUAL_Z_HOME_POS DELTA_HEIGHT // Distance between the nozzle to printbed after homing - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Delta only homes to Z -#define HOMING_FEEDRATE_Z (100*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 5 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 195 -#define PREHEAT_1_TEMP_BED 60 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 100 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), 0, 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 WESTERN - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h deleted file mode 100644 index 128e91e336..0000000000 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ /dev/null @@ -1,2933 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 5 // deltas need the same for all three axes -#define HOMING_BUMP_DIVISOR { 10, 10, 10 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 60 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -// (don't use SLOWDOWN with DELTA because DELTA generates hundreds of segments per second) -//#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE_XYZ 50*60 - #define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -//#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 1 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/delta/FLSUN/kossel/Configuration.h b/config/examples/delta/FLSUN/kossel/Configuration.h deleted file mode 100644 index abf07aa232..0000000000 --- a/config/examples/delta/FLSUN/kossel/Configuration.h +++ /dev/null @@ -1,2337 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(LVD, FLSUN-AC)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_13_EFB -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "FLSUN Kossel" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 5 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 5 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 5 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 1 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 250 -#define HEATER_1_MAXTEMP 250 -#define HEATER_2_MAXTEMP 250 -#define HEATER_3_MAXTEMP 250 -#define HEATER_4_MAXTEMP 250 -#define HEATER_5_MAXTEMP 250 -#define BED_MAXTEMP 115 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - //#define DEFAULT_Kp 22.2 - //#define DEFAULT_Ki 1.08 - //#define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - - //E3D with 30MM fan - #define DEFAULT_Kp 24.77 - #define DEFAULT_Ki 1.84 - #define DEFAULT_Kd 83.61 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - //#define DEFAULT_bedKp 10.00 - //#define DEFAULT_bedKi .023 - //#define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - //D-force - #define DEFAULT_bedKp 22.97 - #define DEFAULT_bedKi 3.76 - #define DEFAULT_bedKd 29.2 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 300 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Delta Settings ============================= -//=========================================================================== -// Enable DELTA kinematics and most of the default configuration for Deltas -#define DELTA - -#if ENABLED(DELTA) - - // Make delta curves from many straight lines (linear interpolation). - // This is a trade-off between visible corners (not enough segments) - // and processor overload (too many expensive sqrt calls). - #define DELTA_SEGMENTS_PER_SECOND 160 - - // After homing move down to a height where XY movement is unconstrained - //#define DELTA_HOME_TO_SAFE_ZONE - - // Delta calibration menu - // uncomment to add three points calibration menu option. - // See http://minow.blogspot.com/index.html#4918805519571907051 - #define DELTA_CALIBRATION_MENU - - // uncomment to add G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results) - #define DELTA_AUTO_CALIBRATION - - // NOTE NB all values for DELTA_* values MUST be floating point, so always have a decimal point in them - - #if ENABLED(DELTA_AUTO_CALIBRATION) - // set the default number of probe points : n*n (1 -> 7) - #define DELTA_CALIBRATION_DEFAULT_POINTS 7 - #endif - - #if EITHER(DELTA_AUTO_CALIBRATION, DELTA_CALIBRATION_MENU) - // Set the steprate for papertest probing - #define PROBE_MANUALLY_STEP 0.05 // (mm) - #endif - - // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). - #define DELTA_PRINTABLE_RADIUS 70.0 // (mm) - - // Center-to-center distance of the holes in the diagonal push rods. - #define DELTA_DIAGONAL_ROD 218.0 // (mm) - - // Distance between bed and nozzle Z home position - #define DELTA_HEIGHT 317.94 // (mm) Get this value from G33 auto calibrate - - #define DELTA_ENDSTOP_ADJ { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate - - // Horizontal distance bridged by diagonal push rods when effector is centered. - #define DELTA_RADIUS 110.0 // (mm) Get this value from G33 auto calibrate - - // Trim adjustments for individual towers - // tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0 - // measured in degrees anticlockwise looking from above the printer - #define DELTA_TOWER_ANGLE_TRIM { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate - - // Delta radius and diagonal rod adjustments (mm) - //#define DELTA_RADIUS_TRIM_TOWER { 0.0, 0.0, 0.0 } - //#define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 } - -#endif - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -//#define USE_XMIN_PLUG -//#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG // a Z probe -#define USE_XMAX_PLUG -#define USE_YMAX_PLUG -#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -// delta speeds must be the same on xyz -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -// variables to calculate steps -#define XYZ_FULL_STEPS_PER_ROTATION 200 -#define XYZ_MICROSTEPS 16 -#define XYZ_BELT_PITCH 2 -#define XYZ_PULLEY_TEETH 16 - -// delta speeds must be the same on xyz -#define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH)) -#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 100 } // default steps per unit for Kossel (GT2, 20 tooth) - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 200, 200, 200, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 4000, 4000, 4000, 4000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK DEFAULT_XJERK - #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -/** - * Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe - * Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN. - */ -//#define Z_PROBE_ALLEN_KEY - -#if ENABLED(Z_PROBE_ALLEN_KEY) - // 2 or 3 sets of coordinates for deploying and retracting the spring loaded touch probe on G29, - // if servo actuated touch probe is not defined. Uncomment as appropriate for your printer/probe. - - // Kossel Mini - #define Z_PROBE_ALLEN_KEY_DEPLOY_1 { 30.0, DELTA_PRINTABLE_RADIUS, 100.0 } - #define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE XY_PROBE_SPEED - - #define Z_PROBE_ALLEN_KEY_DEPLOY_2 { 0.0, DELTA_PRINTABLE_RADIUS, 100.0 } - #define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE (XY_PROBE_SPEED)/10 - - #define Z_PROBE_ALLEN_KEY_DEPLOY_3 { 0.0, (DELTA_PRINTABLE_RADIUS) * 0.75, 100.0 } - #define Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE XY_PROBE_SPEED - - #define Z_PROBE_ALLEN_KEY_STOW_DEPTH 20 - #define Z_PROBE_ALLEN_KEY_STOW_1 { -64.0, 56.0, 23.0 } // Move the probe into position - #define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE XY_PROBE_SPEED - // Move the nozzle down further to push the probe into retracted position. - #define Z_PROBE_ALLEN_KEY_STOW_2 { -64.0, 56.0, 23.0-(Z_PROBE_ALLEN_KEY_STOW_DEPTH) } - #define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (XY_PROBE_SPEED)/10 - // Raise things back up slightly so we don't bump into anything - #define Z_PROBE_ALLEN_KEY_STOW_3 { -64.0, 56.0, 23.0+(Z_PROBE_ALLEN_KEY_STOW_DEPTH) } - #define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE (XY_PROBE_SPEED)/2 - - #define Z_PROBE_ALLEN_KEY_STOW_4 { 0.0, 0.0, 23.0+(Z_PROBE_ALLEN_KEY_STOW_DEPTH) } - #define Z_PROBE_ALLEN_KEY_STOW_4_FEEDRATE XY_PROBE_SPEED - -#endif // Z_PROBE_ALLEN_KEY - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0.10 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 20 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 5000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST) / 6 - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 2 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 2 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR true -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -#define Z_HOMING_HEIGHT 15 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR 1 // deltas always home to max -#define Y_HOME_DIR 1 -#define Z_HOME_DIR 1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE ((DELTA_PRINTABLE_RADIUS) * 2) -#define Y_BED_SIZE ((DELTA_PRINTABLE_RADIUS) * 2) - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS -(DELTA_PRINTABLE_RADIUS) -#define Y_MIN_POS -(DELTA_PRINTABLE_RADIUS) -#define Z_MIN_POS 0 -#define X_MAX_POS DELTA_PRINTABLE_RADIUS -#define Y_MAX_POS DELTA_PRINTABLE_RADIUS -#define Z_MAX_POS MANUAL_Z_HOME_POS - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -//#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - //#define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - // Works best with 5 or more points in each dimension. - #define GRID_MAX_POINTS_X 7 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -#define MANUAL_Z_HOME_POS DELTA_HEIGHT // Distance between the nozzle to printbed after homing - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Delta only homes to Z -#define HOMING_FEEDRATE_Z (100*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 5 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 195 -#define PREHEAT_1_TEMP_BED 60 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 100 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), 0, 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 WESTERN - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/config/examples/delta/FLSUN/kossel/Configuration_adv.h deleted file mode 100644 index 128e91e336..0000000000 --- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h +++ /dev/null @@ -1,2933 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 5 // deltas need the same for all three axes -#define HOMING_BUMP_DIVISOR { 10, 10, 10 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 60 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -// (don't use SLOWDOWN with DELTA because DELTA generates hundreds of segments per second) -//#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE_XYZ 50*60 - #define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -//#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 1 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/config/examples/delta/FLSUN/kossel_mini/Configuration.h deleted file mode 100644 index 972f11b4cf..0000000000 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration.h +++ /dev/null @@ -1,2337 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(Michael Henke, flsun Kossel Mini)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_13_EFB -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Mini Kossel" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 5 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 1 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - //#define DEFAULT_Kp 22.2 - //#define DEFAULT_Ki 1.08 - //#define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - - //E3D with 30MM fan - #define DEFAULT_Kp 24.77 - #define DEFAULT_Ki 1.84 - #define DEFAULT_Kd 83.61 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - //#define DEFAULT_bedKp 10.00 - //#define DEFAULT_bedKi .023 - //#define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - //D-force - #define DEFAULT_bedKp 22.97 - #define DEFAULT_bedKi 3.76 - #define DEFAULT_bedKd 29.2 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 175 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 300 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Delta Settings ============================= -//=========================================================================== -// Enable DELTA kinematics and most of the default configuration for Deltas -#define DELTA - -#if ENABLED(DELTA) - - // Make delta curves from many straight lines (linear interpolation). - // This is a trade-off between visible corners (not enough segments) - // and processor overload (too many expensive sqrt calls). - #define DELTA_SEGMENTS_PER_SECOND 160 - - // After homing move down to a height where XY movement is unconstrained - //#define DELTA_HOME_TO_SAFE_ZONE - - // Delta calibration menu - // uncomment to add three points calibration menu option. - // See http://minow.blogspot.com/index.html#4918805519571907051 - //#define DELTA_CALIBRATION_MENU - - // uncomment to add G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results) - //#define DELTA_AUTO_CALIBRATION - - // NOTE NB all values for DELTA_* values MUST be floating point, so always have a decimal point in them - - #if ENABLED(DELTA_AUTO_CALIBRATION) - // set the default number of probe points : n*n (1 -> 7) - #define DELTA_CALIBRATION_DEFAULT_POINTS 4 - #endif - - #if EITHER(DELTA_AUTO_CALIBRATION, DELTA_CALIBRATION_MENU) - // Set the steprate for papertest probing - #define PROBE_MANUALLY_STEP 0.05 // (mm) - #endif - - // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). - #define DELTA_PRINTABLE_RADIUS 85.0 // (mm) - - // Center-to-center distance of the holes in the diagonal push rods. - #define DELTA_DIAGONAL_ROD 218.0 // (mm) - - // Distance between bed and nozzle Z home position - #define DELTA_HEIGHT 280.00 // (mm) Get this value from G33 auto calibrate - - #define DELTA_ENDSTOP_ADJ { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate - - // Horizontal distance bridged by diagonal push rods when effector is centered. - #define DELTA_RADIUS 101.0 // (mm) Get this value from G33 auto calibrate - - // Trim adjustments for individual towers - // tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0 - // measured in degrees anticlockwise looking from above the printer - #define DELTA_TOWER_ANGLE_TRIM { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate - - // Delta radius and diagonal rod adjustments (mm) - //#define DELTA_RADIUS_TRIM_TOWER { 0.0, 0.0, 0.0 } - //#define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 } - -#endif - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -//#define USE_XMIN_PLUG -//#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -#define USE_XMAX_PLUG -#define USE_YMAX_PLUG -#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -// delta speeds must be the same on xyz -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -// variables to calculate steps -#define XYZ_FULL_STEPS_PER_ROTATION 200 -#define XYZ_MICROSTEPS 16 -#define XYZ_BELT_PITCH 2 -#define XYZ_PULLEY_TEETH 16 - -// delta speeds must be the same on xyz -#define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH)) -#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 90 } // default steps per unit for Kossel (GT2, 20 tooth) - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 200, 200, 200, 200 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 4000, 4000, 4000, 4000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 2500 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK DEFAULT_XJERK - #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.016 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -/** - * Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe - * Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN. - */ -//#define Z_PROBE_ALLEN_KEY - -#if ENABLED(Z_PROBE_ALLEN_KEY) - // 2 or 3 sets of coordinates for deploying and retracting the spring loaded touch probe on G29, - // if servo actuated touch probe is not defined. Uncomment as appropriate for your printer/probe. - - // Kossel Mini - #define Z_PROBE_ALLEN_KEY_DEPLOY_1 { 30.0, DELTA_PRINTABLE_RADIUS, 100.0 } - #define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE XY_PROBE_SPEED - - #define Z_PROBE_ALLEN_KEY_DEPLOY_2 { 0.0, DELTA_PRINTABLE_RADIUS, 100.0 } - #define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE (XY_PROBE_SPEED)/10 - - #define Z_PROBE_ALLEN_KEY_DEPLOY_3 { 0.0, (DELTA_PRINTABLE_RADIUS) * 0.75, 100.0 } - #define Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE XY_PROBE_SPEED - - #define Z_PROBE_ALLEN_KEY_STOW_DEPTH 20 - #define Z_PROBE_ALLEN_KEY_STOW_1 { -64.0, 56.0, 23.0 } // Move the probe into position - #define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE XY_PROBE_SPEED - // Move the nozzle down further to push the probe into retracted position. - #define Z_PROBE_ALLEN_KEY_STOW_2 { -64.0, 56.0, 23.0-(Z_PROBE_ALLEN_KEY_STOW_DEPTH) } - #define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (XY_PROBE_SPEED)/10 - // Raise things back up slightly so we don't bump into anything - #define Z_PROBE_ALLEN_KEY_STOW_3 { -64.0, 56.0, 23.0+(Z_PROBE_ALLEN_KEY_STOW_DEPTH) } - #define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE (XY_PROBE_SPEED)/2 - - #define Z_PROBE_ALLEN_KEY_STOW_4 { 0.0, 0.0, 23.0+(Z_PROBE_ALLEN_KEY_STOW_DEPTH) } - #define Z_PROBE_ALLEN_KEY_STOW_4_FEEDRATE XY_PROBE_SPEED - -#endif // Z_PROBE_ALLEN_KEY - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0.25 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 2000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 50 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR true -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -#define Z_HOMING_HEIGHT 15 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR 1 // deltas always home to max -#define Y_HOME_DIR 1 -#define Z_HOME_DIR 1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE ((DELTA_PRINTABLE_RADIUS) * 2) -#define Y_BED_SIZE ((DELTA_PRINTABLE_RADIUS) * 2) - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS -(DELTA_PRINTABLE_RADIUS) -#define Y_MIN_POS -(DELTA_PRINTABLE_RADIUS) -#define Z_MIN_POS 0 -#define X_MAX_POS DELTA_PRINTABLE_RADIUS -#define Y_MAX_POS DELTA_PRINTABLE_RADIUS -#define Z_MAX_POS MANUAL_Z_HOME_POS - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - //#define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - // Works best with 5 or more points in each dimension. - #define GRID_MAX_POINTS_X 9 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -#define MANUAL_Z_HOME_POS DELTA_HEIGHT // Distance between the nozzle to printbed after homing - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_MIN_POS + X_MAX_POS) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_MIN_POS + Y_MAX_POS) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Delta only homes to Z -#define HOMING_FEEDRATE_Z (45*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 5 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 100 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), 0, 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 WESTERN - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h deleted file mode 100644 index a3379353fc..0000000000 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h +++ /dev/null @@ -1,2933 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 5 // deltas need the same for all three axes -#define HOMING_BUMP_DIVISOR { 10, 10, 10 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 60 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -// (don't use SLOWDOWN with DELTA because DELTA generates hundreds of segments per second) -//#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE_XYZ 50*60 - #define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -//#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 1 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration.h b/config/examples/delta/Geeetech/G2Pro/Configuration.h deleted file mode 100644 index 6dd3da5e49..0000000000 --- a/config/examples/delta/Geeetech/G2Pro/Configuration.h +++ /dev/null @@ -1,2332 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_GT2560_REV_A_PLUS -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "3D Printer" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 //G2S 2 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -#define PSU_CONTROL -#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 //G2S 1 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - #define DEFAULT_Kp 22.2 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Delta Settings ============================= -//=========================================================================== -// Enable DELTA kinematics and most of the default configuration for Deltas -#define DELTA - -#if ENABLED(DELTA) - - // Make delta curves from many straight lines (linear interpolation). - // This is a trade-off between visible corners (not enough segments) - // and processor overload (too many expensive sqrt calls). - #define DELTA_SEGMENTS_PER_SECOND 160 - - // After homing move down to a height where XY movement is unconstrained - #define DELTA_HOME_TO_SAFE_ZONE - - // Delta calibration menu - // uncomment to add three points calibration menu option. - // See http://minow.blogspot.com/index.html#4918805519571907051 - #define DELTA_CALIBRATION_MENU - - // uncomment to add G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results) - #define DELTA_AUTO_CALIBRATION - - - #if ENABLED(DELTA_AUTO_CALIBRATION) - // set the default number of probe points : n*n (1 -> 7) - #define DELTA_CALIBRATION_DEFAULT_POINTS 2 - #endif - - #if EITHER(DELTA_AUTO_CALIBRATION, DELTA_CALIBRATION_MENU) - // Set the steprate for papertest probing - #define PROBE_MANUALLY_STEP 0.05 // (mm) - #endif - - // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). - #define DELTA_PRINTABLE_RADIUS 90.0 // (mm) - - // Center-to-center distance of the holes in the diagonal push rods. - #define DELTA_DIAGONAL_ROD 196.0 // (mm) - - // Distance between bed and nozzle Z home position - #define DELTA_HEIGHT 200 // (mm) Get this value from G33 auto calibrate - - #define DELTA_ENDSTOP_ADJ { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate - -// Horizontal offset from middle of printer to smooth rod center. -//#define DELTA_SMOOTH_ROD_OFFSET 160 // mm - -// Horizontal offset of the universal joints on the end effector. -//#define DELTA_EFFECTOR_OFFSET 36 // mm //34 G2 frame - -// Horizontal offset of the universal joints on the carriages. -//#define DELTA_CARRIAGE_OFFSET 33 // mm //25 G2 frame - - // Horizontal distance bridged by diagonal push rods when effector is centered. -//#define DELTA_RADIUS (DELTA_SMOOTH_ROD_OFFSET-DELTA_EFFECTOR_OFFSET-DELTA_CARRIAGE_OFFSET+1) //+2 G2 frame - #define DELTA_RADIUS 90.0 // (mm) Get this value from G33 auto calibrate - - // Trim adjustments for individual towers - // tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0 - // measured in degrees anticlockwise looking from above the printer - #define DELTA_TOWER_ANGLE_TRIM { 0.70, 0.05, -0.74 } // Get these values from G33 auto calibrate - - // Delta radius and diagonal rod adjustments (mm) - //#define DELTA_RADIUS_TRIM_TOWER { 0.0, 0.0, 0.0 } - //#define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 } - -#endif - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -//#define USE_XMIN_PLUG -//#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG // a Z probe -#define USE_XMAX_PLUG -#define USE_YMAX_PLUG -#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. //G2 false -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING Z_MIN_ENDSTOP_INVERTING // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 -#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -// delta speeds must be the same on xyz -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -// variables to calculate steps -#define XYZ_FULL_STEPS_PER_ROTATION 200 -#define XYZ_MICROSTEPS 16 -#define XYZ_BELT_PITCH 2 -#define XYZ_PULLEY_TEETH 20 - -// delta speeds must be the same on xyz -#define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH)) -#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 100 } // default steps per unit for Kossel (GT2, 20 tooth) - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 200, 200, 200, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 600, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 3000, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 8.0 - #define DEFAULT_YJERK DEFAULT_XJERK - #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_JERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -/** - * Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe - * Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN. - */ -#define Z_PROBE_ALLEN_KEY - -#if ENABLED(Z_PROBE_ALLEN_KEY) - // 2 or 3 sets of coordinates for deploying and retracting the spring loaded touch probe on G29, - // if servo actuated touch probe is not defined. Uncomment as appropriate for your printer/probe. - - #define Z_PROBE_ALLEN_KEY_DEPLOY_1 { 30.0, DELTA_PRINTABLE_RADIUS, 100.0 } - #define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE XY_PROBE_SPEED - - #define Z_PROBE_ALLEN_KEY_DEPLOY_2 { 0.0, DELTA_PRINTABLE_RADIUS, 100.0 } - #define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE (XY_PROBE_SPEED)/10 - - #define Z_PROBE_ALLEN_KEY_DEPLOY_3 { 0.0, (DELTA_PRINTABLE_RADIUS) * 0.75, 100.0 } - #define Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE XY_PROBE_SPEED - - #define Z_PROBE_ALLEN_KEY_STOW_1 { -64.0, 56.0, 23.0 } // Move the probe into position - #define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE XY_PROBE_SPEED - - #define Z_PROBE_ALLEN_KEY_STOW_2 { -64.0, 56.0, 3.0 } // Push it down - #define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (XY_PROBE_SPEED)/10 - - #define Z_PROBE_ALLEN_KEY_STOW_3 { -64.0, 56.0, 50.0 } // Move it up to clear - #define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE XY_PROBE_SPEED - - #define Z_PROBE_ALLEN_KEY_STOW_4 { 0.0, 0.0, 50.0 } - #define Z_PROBE_ALLEN_KEY_STOW_4_FEEDRATE XY_PROBE_SPEED - -#endif // Z_PROBE_ALLEN_KEY - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { -19, -11, -2 } //G2 { 19, -11, -2 } - -// Certain types of probes need to stay away from edges -#define MIN_PROBE_EDGE 1 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR true -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR true -#define INVERT_E2_DIR true -#define INVERT_E3_DIR true -#define INVERT_E4_DIR true -#define INVERT_E5_DIR true - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR 1 // deltas always home to max -#define Y_HOME_DIR 1 -#define Z_HOME_DIR 1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE ((DELTA_PRINTABLE_RADIUS) * 2) -#define Y_BED_SIZE ((DELTA_PRINTABLE_RADIUS) * 2) - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS -(DELTA_PRINTABLE_RADIUS) -#define Y_MIN_POS -(DELTA_PRINTABLE_RADIUS) -#define Z_MIN_POS 0 -#define X_MAX_POS DELTA_PRINTABLE_RADIUS -#define Y_MAX_POS DELTA_PRINTABLE_RADIUS -#define Z_MAX_POS MANUAL_Z_HOME_POS - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - //#define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - // Works best with 5 or more points in each dimension. - #define GRID_MAX_POINTS_X 5 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 5 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - #define UBL_Z_RAISE_WHEN_OFF_MESH 0 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - #define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -#define MANUAL_Z_HOME_POS DELTA_HEIGHT // Distance between the nozzle to printbed after homing - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Delta only homes to Z -#define HOMING_FEEDRATE_Z (60*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 200 -#define PREHEAT_1_TEMP_BED 60 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 250 -#define PREHEAT_2_TEMP_BED 100 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { 0, 0, 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 10 -#define LCD_FEEDBACK_FREQUENCY_HZ 50 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h deleted file mode 100644 index a009cbae98..0000000000 --- a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h +++ /dev/null @@ -1,2929 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - #define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 10 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -#define MILLISECONDS_PREHEAT_TIME 30000 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 5 // deltas need the same for all three axes -#define HOMING_BUMP_DIVISOR { 10, 10, 10 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 60 -#define DISABLE_INACTIVE_X false -#define DISABLE_INACTIVE_Y false -#define DISABLE_INACTIVE_Z false // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -// (don't use SLOWDOWN with DELTA because DELTA generates hundreds of segments per second) -//#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE_XYZ 50*60 - #define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 40 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 50 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - #define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - #define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -#define LCD_TIMEOUT_TO_STATUS 60000 - -// Add an 'M73' G-code to set the current percentage -#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - #define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - #define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - #define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - #define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - #define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 5000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 2500 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - #define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G27" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - #define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - #define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - #define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 2000 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - #define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - #define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 1 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - #define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - #define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L6470 - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current (VALID: 375 x (1 - 16) - 6A max - rounds down) - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // On L6474 STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - #define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - #define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration.h b/config/examples/delta/Geeetech/Rostock 301/Configuration.h deleted file mode 100644 index e5a964a3e6..0000000000 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration.h +++ /dev/null @@ -1,2326 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(Phr3d13, Geeetech Rostock 301)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 1 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_GTM32_PRO_VB -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Rostock 301" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 3 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 3 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 5 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 5 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - #define DEFAULT_Kp 22.2 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Delta Settings ============================= -//=========================================================================== -// Enable DELTA kinematics and most of the default configuration for Deltas -#define DELTA - -#if ENABLED(DELTA) - - // Make delta curves from many straight lines (linear interpolation). - // This is a trade-off between visible corners (not enough segments) - // and processor overload (too many expensive sqrt calls). - #define DELTA_SEGMENTS_PER_SECOND 200 - - // After homing move down to a height where XY movement is unconstrained - //#define DELTA_HOME_TO_SAFE_ZONE - - // Delta calibration menu - // uncomment to add three points calibration menu option. - // See http://minow.blogspot.com/index.html#4918805519571907051 - #define DELTA_CALIBRATION_MENU - - // uncomment to add G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results) - //#define DELTA_AUTO_CALIBRATION - - // NOTE NB all values for DELTA_* values MUST be floating point, so always have a decimal point in them - - #if ENABLED(DELTA_AUTO_CALIBRATION) - // set the default number of probe points : n*n (1 -> 7) - #define DELTA_CALIBRATION_DEFAULT_POINTS 4 - #endif - - #if EITHER(DELTA_AUTO_CALIBRATION, DELTA_CALIBRATION_MENU) - // Set the steprate for papertest probing - #define PROBE_MANUALLY_STEP 0.05 // (mm) - #endif - - // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). - #define DELTA_PRINTABLE_RADIUS 90.0 // (mm) - - // Center-to-center distance of the holes in the diagonal push rods. - #define DELTA_DIAGONAL_ROD 196.0 // (mm) - - // Distance between bed and nozzle Z home position - #define DELTA_HEIGHT 228.00 // (mm) Get this value from G33 auto calibrate - - #define DELTA_ENDSTOP_ADJ { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate - - // Horizontal distance bridged by diagonal push rods when effector is centered. - #define DELTA_RADIUS 92 //124.0 // (mm) Get this value from G33 auto calibrate - - // Trim adjustments for individual towers - // tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0 - // measured in degrees anticlockwise looking from above the printer - #define DELTA_TOWER_ANGLE_TRIM { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate - - // Delta radius and diagonal rod adjustments (mm) - //#define DELTA_RADIUS_TRIM_TOWER { 0.0, 0.0, 0.0 } - //#define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 } - -#endif - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -//#define USE_XMIN_PLUG -//#define USE_YMIN_PLUG -//#define USE_ZMIN_PLUG // a Z probe -#define USE_XMAX_PLUG -#define USE_YMAX_PLUG -#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -// delta speeds must be the same on xyz -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -// variables to calculate steps -#define XYZ_FULL_STEPS_PER_ROTATION 200 -#define XYZ_MICROSTEPS 16 -#define XYZ_BELT_PITCH 2 -#define XYZ_PULLEY_TEETH 20 - -// delta speeds must be the same on xyz -#define DEFAULT_XYZ_STEPS_PER_UNIT 80.2649 //((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH)) -#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 95 } // default steps per unit for Kossel (GT2, 20 tooth) - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 500, 500, 500, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 9000, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK DEFAULT_XJERK - #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -/** - * Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe - * Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN. - */ -//#define Z_PROBE_ALLEN_KEY - -#if ENABLED(Z_PROBE_ALLEN_KEY) - // 2 or 3 sets of coordinates for deploying and retracting the spring loaded touch probe on G29, - // if servo actuated touch probe is not defined. Uncomment as appropriate for your printer/probe. - - #define Z_PROBE_ALLEN_KEY_DEPLOY_1 { 30.0, DELTA_PRINTABLE_RADIUS, 100.0 } - #define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE XY_PROBE_SPEED - - #define Z_PROBE_ALLEN_KEY_DEPLOY_2 { 0.0, DELTA_PRINTABLE_RADIUS, 100.0 } - #define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE (XY_PROBE_SPEED)/10 - - #define Z_PROBE_ALLEN_KEY_DEPLOY_3 { 0.0, (DELTA_PRINTABLE_RADIUS) * 0.75, 100.0 } - #define Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE XY_PROBE_SPEED - - #define Z_PROBE_ALLEN_KEY_STOW_1 { -64.0, 56.0, 23.0 } // Move the probe into position - #define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE XY_PROBE_SPEED - - #define Z_PROBE_ALLEN_KEY_STOW_2 { -64.0, 56.0, 3.0 } // Push it down - #define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (XY_PROBE_SPEED)/10 - - #define Z_PROBE_ALLEN_KEY_STOW_3 { -64.0, 56.0, 50.0 } // Move it up to clear - #define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE XY_PROBE_SPEED - - #define Z_PROBE_ALLEN_KEY_STOW_4 { 0.0, 0.0, 50.0 } - #define Z_PROBE_ALLEN_KEY_STOW_4_FEEDRATE XY_PROBE_SPEED - -#endif // Z_PROBE_ALLEN_KEY - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 0, -10, -3.5 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 4000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR true -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR 1 // deltas always home to max -#define Y_HOME_DIR 1 -#define Z_HOME_DIR 1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE ((DELTA_PRINTABLE_RADIUS) * 2) -#define Y_BED_SIZE ((DELTA_PRINTABLE_RADIUS) * 2) - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS -(DELTA_PRINTABLE_RADIUS) -#define Y_MIN_POS -(DELTA_PRINTABLE_RADIUS) -#define Z_MIN_POS 0 -#define X_MAX_POS DELTA_PRINTABLE_RADIUS -#define Y_MAX_POS DELTA_PRINTABLE_RADIUS -#define Z_MAX_POS MANUAL_Z_HOME_POS - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - //#define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - // Works best with 5 or more points in each dimension. - #define GRID_MAX_POINTS_X 9 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -#define MANUAL_Z_HOME_POS DELTA_HEIGHT // Distance between the nozzle to printbed after homing - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Delta only homes to Z -#define HOMING_FEEDRATE_Z (200*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 100 -#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), 0, 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT -#define SDIO_SUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h deleted file mode 100644 index d5191cd00e..0000000000 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h +++ /dev/null @@ -1,2933 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 5 // deltas need the same for all three axes -#define HOMING_BUMP_DIVISOR { 10, 10, 10 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 60 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -// (don't use SLOWDOWN with DELTA because DELTA generates hundreds of segments per second) -//#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE_XYZ 50*60 - #define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -//#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 1 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration.h b/config/examples/delta/Hatchbox_Alpha/Configuration.h deleted file mode 100644 index 42dc766562..0000000000 --- a/config/examples/delta/Hatchbox_Alpha/Configuration.h +++ /dev/null @@ -1,2353 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration for Hatchbox Alpha with E3D v6 extruder - * http://hatchbox3d.com/Guides/HATCHBOX%20Alpha%203D%20Printer%20User%20Manual.pdf - */ - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 115200 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_MKS_GEN_13 -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Hatchbox Alpha" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 5 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - //#define DEFAULT_Kp 22.2 - //#define DEFAULT_Ki 1.08 - //#define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - - // E3D-v6 - #define DEFAULT_Kp 18.55 - #define DEFAULT_Ki 2.71 - #define DEFAULT_Kd 47.69 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - //#define DEFAULT_bedKp 10.00 - //#define DEFAULT_bedKi .023 - //#define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - //HatchBox Alpha - #define DEFAULT_bedKp 72.11 - #define DEFAULT_bedKi 7.1 - #define DEFAULT_bedKd 488.31 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Delta Settings ============================= -//=========================================================================== -// Enable DELTA kinematics and most of the default configuration for Deltas -#define DELTA - -#if ENABLED(DELTA) - - // Make delta curves from many straight lines (linear interpolation). - // This is a trade-off between visible corners (not enough segments) - // and processor overload (too many expensive sqrt calls). - #define DELTA_SEGMENTS_PER_SECOND 200 - - // After homing move down to a height where XY movement is unconstrained - //#define DELTA_HOME_TO_SAFE_ZONE - - // Delta calibration menu - // uncomment to add three points calibration menu option. - // See http://minow.blogspot.com/index.html#4918805519571907051 - #define DELTA_CALIBRATION_MENU - - // uncomment to add G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results) - #define DELTA_AUTO_CALIBRATION - - // NOTE NB all values for DELTA_* values MUST be floating point, so always have a decimal point in them - - #if ENABLED(DELTA_AUTO_CALIBRATION) - // set the default number of probe points : n*n (1 -> 7) - #define DELTA_CALIBRATION_DEFAULT_POINTS 4 - #endif - - #if EITHER(DELTA_AUTO_CALIBRATION, DELTA_CALIBRATION_MENU) - // Set the steprate for papertest probing - #define PROBE_MANUALLY_STEP 0.05 // (mm) - #endif - - // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). - #define DELTA_PRINTABLE_RADIUS 151.0 // (mm) - - // Center-to-center distance of the holes in the diagonal push rods. - #define DELTA_DIAGONAL_ROD 356.5 // (mm) - - // Distance between bed and nozzle Z home position - #define DELTA_HEIGHT 352.00 // (mm) Get this value from G33 auto calibrate - - #define DELTA_ENDSTOP_ADJ { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate - - // Horizontal distance bridged by diagonal push rods when effector is centered. - #define DELTA_RADIUS 176.5 // (mm) Get this value from G33 auto calibrate - - // Trim adjustments for individual towers - // tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0 - // measured in degrees anticlockwise looking from above the printer - #define DELTA_TOWER_ANGLE_TRIM { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate - - // Delta radius and diagonal rod adjustments (mm) - //#define DELTA_RADIUS_TRIM_TOWER { 0.0, 0.0, 0.0 } - //#define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 } - -#endif - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -//#define USE_XMIN_PLUG -//#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG // a Z probe -#define USE_XMAX_PLUG -#define USE_YMAX_PLUG -#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -// delta speeds must be the same on xyz -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -// variables to calculate steps -#define XYZ_FULL_STEPS_PER_ROTATION 200 -#define XYZ_MICROSTEPS 16 -#define XYZ_BELT_PITCH 2 -#define XYZ_PULLEY_TEETH 16 - -// delta speeds must be the same on xyz -#define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH)) -#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 95 } // default steps per unit for Kossel (GT2, 20 tooth) - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 500, 500, 500, 200 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 9000, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 20.0 - #define DEFAULT_YJERK DEFAULT_XJERK - #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.053 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -/** - * Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe - * Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN. - */ -//#define Z_PROBE_ALLEN_KEY - -#if ENABLED(Z_PROBE_ALLEN_KEY) - // 2 or 3 sets of coordinates for deploying and retracting the spring loaded touch probe on G29, - // if servo actuated touch probe is not defined. Uncomment as appropriate for your printer/probe. - - #define Z_PROBE_ALLEN_KEY_DEPLOY_1 { 30.0, DELTA_PRINTABLE_RADIUS, 100.0 } - #define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE XY_PROBE_SPEED - - #define Z_PROBE_ALLEN_KEY_DEPLOY_2 { 0.0, DELTA_PRINTABLE_RADIUS, 100.0 } - #define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE (XY_PROBE_SPEED)/10 - - #define Z_PROBE_ALLEN_KEY_DEPLOY_3 { 0.0, (DELTA_PRINTABLE_RADIUS) * 0.75, 100.0 } - #define Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE XY_PROBE_SPEED - - #define Z_PROBE_ALLEN_KEY_STOW_1 { -64.0, 56.0, 23.0 } // Move the probe into position - #define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE XY_PROBE_SPEED - - #define Z_PROBE_ALLEN_KEY_STOW_2 { -64.0, 56.0, 3.0 } // Push it down - #define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (XY_PROBE_SPEED)/10 - - #define Z_PROBE_ALLEN_KEY_STOW_3 { -64.0, 56.0, 50.0 } // Move it up to clear - #define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE XY_PROBE_SPEED - - #define Z_PROBE_ALLEN_KEY_STOW_4 { 0.0, 0.0, 50.0 } - #define Z_PROBE_ALLEN_KEY_STOW_4_FEEDRATE XY_PROBE_SPEED - -#endif // Z_PROBE_ALLEN_KEY - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 0, 0, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 4000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST (HOMING_FEEDRATE_Z / 4) - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 4) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR false -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR 1 // deltas always home to max -#define Y_HOME_DIR 1 -#define Z_HOME_DIR 1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE ((DELTA_PRINTABLE_RADIUS) * 2) -#define Y_BED_SIZE ((DELTA_PRINTABLE_RADIUS) * 2) - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS -(DELTA_PRINTABLE_RADIUS) -#define Y_MIN_POS -(DELTA_PRINTABLE_RADIUS) -#define Z_MIN_POS 0 -#define X_MAX_POS DELTA_PRINTABLE_RADIUS -#define Y_MAX_POS DELTA_PRINTABLE_RADIUS -#define Z_MAX_POS MANUAL_Z_HOME_POS - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - //#define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - // Works best with 5 or more points in each dimension. - #define GRID_MAX_POINTS_X 9 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - #define PROBE_PT_1_X -116 - #define PROBE_PT_1_Y -67.5 - #define PROBE_PT_2_X 116 - #define PROBE_PT_2_Y -67.5 - #define PROBE_PT_3_X 0 - #define PROBE_PT_3_Y 135 -#endif - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -#define MANUAL_Z_HOME_POS DELTA_HEIGHT // Distance between the nozzle to printbed after homing - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Delta only homes to Z -#define HOMING_FEEDRATE_Z (200*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 210 -#define PREHEAT_1_TEMP_BED 60 -#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 230 -#define PREHEAT_2_TEMP_BED 105 -#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), 0, 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/delta/MKS/SBASE/Configuration.h b/config/examples/delta/MKS/SBASE/Configuration.h deleted file mode 100644 index c8d18a252e..0000000000 --- a/config/examples/delta/MKS/SBASE/Configuration.h +++ /dev/null @@ -1,2325 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_MKS_SBASE -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Deltabot" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - #define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 -1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 5 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - #define DEFAULT_Kp 22.2 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Delta Settings ============================= -//=========================================================================== -// Enable DELTA kinematics and most of the default configuration for Deltas -#define DELTA - -#if ENABLED(DELTA) - - // Make delta curves from many straight lines (linear interpolation). - // This is a trade-off between visible corners (not enough segments) - // and processor overload (too many expensive sqrt calls). - #define DELTA_SEGMENTS_PER_SECOND 200 - - // After homing move down to a height where XY movement is unconstrained - //#define DELTA_HOME_TO_SAFE_ZONE - - // Delta calibration menu - // uncomment to add three points calibration menu option. - // See http://minow.blogspot.com/index.html#4918805519571907051 - //#define DELTA_CALIBRATION_MENU - - // uncomment to add G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results) - //#define DELTA_AUTO_CALIBRATION - - // NOTE NB all values for DELTA_* values MUST be floating point, so always have a decimal point in them - - #if ENABLED(DELTA_AUTO_CALIBRATION) - // set the default number of probe points : n*n (1 -> 7) - #define DELTA_CALIBRATION_DEFAULT_POINTS 4 - #endif - - #if EITHER(DELTA_AUTO_CALIBRATION, DELTA_CALIBRATION_MENU) - // Set the steprate for papertest probing - #define PROBE_MANUALLY_STEP 0.05 // (mm) - #endif - - // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). - #define DELTA_PRINTABLE_RADIUS 140.0 // (mm) - - // Center-to-center distance of the holes in the diagonal push rods. - #define DELTA_DIAGONAL_ROD 250.0 // (mm) - - // Distance between bed and nozzle Z home position - #define DELTA_HEIGHT 250.00 // (mm) Get this value from G33 auto calibrate - - #define DELTA_ENDSTOP_ADJ { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate - - // Horizontal distance bridged by diagonal push rods when effector is centered. - #define DELTA_RADIUS 124.0 // (mm) Get this value from G33 auto calibrate - - // Trim adjustments for individual towers - // tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0 - // measured in degrees anticlockwise looking from above the printer - #define DELTA_TOWER_ANGLE_TRIM { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate - - // Delta radius and diagonal rod adjustments (mm) - //#define DELTA_RADIUS_TRIM_TOWER { 0.0, 0.0, 0.0 } - //#define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 } - -#endif - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -//#define USE_XMIN_PLUG -//#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG // a Z probe -#define USE_XMAX_PLUG -#define USE_YMAX_PLUG -#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -// delta speeds must be the same on xyz -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -// variables to calculate steps -#define XYZ_FULL_STEPS_PER_ROTATION 426.67 -#define XYZ_MICROSTEPS 32 -#define XYZ_BELT_PITCH 2 -#define XYZ_PULLEY_TEETH 20 - -// delta speeds must be the same on xyz -#define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH)) -#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 760*1.1 } // default steps per unit for Kossel (GT2, 20 tooth) - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 500, 500, 500, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 9000, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK DEFAULT_XJERK - #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -/** - * Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe - * Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN. - */ -//#define Z_PROBE_ALLEN_KEY - -#if ENABLED(Z_PROBE_ALLEN_KEY) - // 2 or 3 sets of coordinates for deploying and retracting the spring loaded touch probe on G29, - // if servo actuated touch probe is not defined. Uncomment as appropriate for your printer/probe. - - #define Z_PROBE_ALLEN_KEY_DEPLOY_1 { 30.0, DELTA_PRINTABLE_RADIUS, 100.0 } - #define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE XY_PROBE_SPEED - - #define Z_PROBE_ALLEN_KEY_DEPLOY_2 { 0.0, DELTA_PRINTABLE_RADIUS, 100.0 } - #define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE (XY_PROBE_SPEED)/10 - - #define Z_PROBE_ALLEN_KEY_DEPLOY_3 { 0.0, (DELTA_PRINTABLE_RADIUS) * 0.75, 100.0 } - #define Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE XY_PROBE_SPEED - - #define Z_PROBE_ALLEN_KEY_STOW_1 { -64.0, 56.0, 23.0 } // Move the probe into position - #define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE XY_PROBE_SPEED - - #define Z_PROBE_ALLEN_KEY_STOW_2 { -64.0, 56.0, 3.0 } // Push it down - #define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (XY_PROBE_SPEED)/10 - - #define Z_PROBE_ALLEN_KEY_STOW_3 { -64.0, 56.0, 50.0 } // Move it up to clear - #define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE XY_PROBE_SPEED - - #define Z_PROBE_ALLEN_KEY_STOW_4 { 0.0, 0.0, 50.0 } - #define Z_PROBE_ALLEN_KEY_STOW_4_FEEDRATE XY_PROBE_SPEED - -#endif // Z_PROBE_ALLEN_KEY - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 0, -10, -3.5 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 4000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false // DELTA does not invert -#define INVERT_Y_DIR false -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR 1 // deltas always home to max -#define Y_HOME_DIR 1 -#define Z_HOME_DIR 1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE ((DELTA_PRINTABLE_RADIUS) * 2) -#define Y_BED_SIZE ((DELTA_PRINTABLE_RADIUS) * 2) - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS -(DELTA_PRINTABLE_RADIUS) -#define Y_MIN_POS -(DELTA_PRINTABLE_RADIUS) -#define Z_MIN_POS 0 -#define X_MAX_POS DELTA_PRINTABLE_RADIUS -#define Y_MAX_POS DELTA_PRINTABLE_RADIUS -#define Z_MAX_POS MANUAL_Z_HOME_POS - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -//#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -//#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - //#define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - // Works best with 5 or more points in each dimension. - #define GRID_MAX_POINTS_X 9 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -#define MANUAL_Z_HOME_POS DELTA_HEIGHT // Distance between the nozzle to printbed after homing - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Delta only homes to Z -#define HOMING_FEEDRATE_Z (200*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/delta/MKS/SBASE/Configuration_adv.h b/config/examples/delta/MKS/SBASE/Configuration_adv.h deleted file mode 100644 index 59eaa019f4..0000000000 --- a/config/examples/delta/MKS/SBASE/Configuration_adv.h +++ /dev/null @@ -1,2933 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 50 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 6 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 40 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 110 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 4 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 100 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 5 // deltas need the same for all three axes -#define HOMING_BUMP_DIVISOR { 10, 10, 10 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -// (don't use SLOWDOWN with DELTA because DELTA generates hundreds of segments per second) -//#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE_XYZ 50*60 - #define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -//#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 1 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/delta/MKS/SBASE/RRD Full Graphic Smart Controller.md b/config/examples/delta/MKS/SBASE/RRD Full Graphic Smart Controller.md deleted file mode 100644 index 265cb541f9..0000000000 --- a/config/examples/delta/MKS/SBASE/RRD Full Graphic Smart Controller.md +++ /dev/null @@ -1,34 +0,0 @@ -### RepRap Discount Full Graphics Smart Controller - -Many MKS products have the EXP1 & EXP2 LCD connectors rotated 180 degrees from the ones on the RepRap LCD controllers. So there are three options for connecting the RepRap Discount Full Graphic Smart Controller: - 1. Slice, file, or grind the key off one end of the cables and plug the cables in backwards. - 2. Carefully pry the plastic housings off the board or controller, rotate them 180 degrees, and press them back onto the board. - 3. Make custom cables with one end's connector rotated 180 degrees. - ---- - -#### 3 DEC 2017 - -The current Marlin 2.0.x firmware can't access some of the pins on the EXP2 connector. A custom cable that gets three of the signals from a different connector is required to use the RepRap Discount Full Graphic Smart Controller. Use that cable to move the following connections: - -From|To ---|-- -`P0.8`|`J8-3` -`P0.7`|`J8-2` -`P0.5`|`J8-4` - -If using pins other than the J8 pins listed above the `spi_pins.h` file will need to be modified. - -An octopus cable like the [Adafruit 1199](https://www.adafruit.com/product/1199) 10-pin IDC Socket Rainbow Breakout Cable can simplify the construction of the custom cable. Just plug the Adafruit 1199 into one of the cables that came with the LCD and the individual pins into J8 and EXP2 as needed. - ---- - -#### 27 APR 2018 - -For a functional `SD_DETECT_PIN`, also move the following pin: - -From|To ---|-- -`P0.27`|`J8-5` - -If a different pin is used, modify the `pins_MKS_SBASE.h` file. diff --git a/config/examples/delta/Tevo Little Monster/Configuration.h b/config/examples/delta/Tevo Little Monster/Configuration.h deleted file mode 100644 index 0c23b667df..0000000000 --- a/config/examples/delta/Tevo Little Monster/Configuration.h +++ /dev/null @@ -1,2329 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(HEINRICHS)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT_2 1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 115200 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_MKS_GEN_L -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "TEVO Little Monster" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 1 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - //#define DEFAULT_Kp 22.2 - //#define DEFAULT_Ki 1.08 - //#define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - - //E3D with 30MM fan - #define DEFAULT_Kp 41.09 - #define DEFAULT_Ki 7.60 - #define DEFAULT_Kd 55.54 -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 300 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Delta Settings ============================= -//=========================================================================== -// Enable DELTA kinematics and most of the default configuration for Deltas -#define DELTA - -#if ENABLED(DELTA) - - // Make delta curves from many straight lines (linear interpolation). - // This is a trade-off between visible corners (not enough segments) - // and processor overload (too many expensive sqrt calls). - #define DELTA_SEGMENTS_PER_SECOND 200 - - // After homing move down to a height where XY movement is unconstrained - //#define DELTA_HOME_TO_SAFE_ZONE - - // Delta calibration menu - // uncomment to add three points calibration menu option. - // See http://minow.blogspot.com/index.html#4918805519571907051 - #define DELTA_CALIBRATION_MENU - - // uncomment to add G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results) - #define DELTA_AUTO_CALIBRATION - - // NOTE NB all values for DELTA_* values MUST be floating point, so always have a decimal point in them - - #if ENABLED(DELTA_AUTO_CALIBRATION) - // set the default number of probe points : n*n (1 -> 7) - #define DELTA_CALIBRATION_DEFAULT_POINTS 7 - #endif - - #if EITHER(DELTA_AUTO_CALIBRATION, DELTA_CALIBRATION_MENU) - // Set the steprate for papertest probing - #define PROBE_MANUALLY_STEP 0.05 // (mm) - #endif - - // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). - #define DELTA_PRINTABLE_RADIUS 165.0 // (mm) - - // Center-to-center distance of the holes in the diagonal push rods. - #define DELTA_DIAGONAL_ROD 397.19 // (mm) - - // Distance between bed and nozzle Z home position - #define DELTA_HEIGHT 522.27 // (mm) Get this value from G33 auto calibrate - - #define DELTA_ENDSTOP_ADJ { 0.0, -0.12, -0.78 } // Get these values from G33 auto calibrate - - // Horizontal distance bridged by diagonal push rods when effector is centered. - #define DELTA_RADIUS 157.39 // (mm) Get this value from G33 auto calibrate - - // Trim adjustments for individual towers - // tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0 - // measured in degrees anticlockwise looking from above the printer - #define DELTA_TOWER_ANGLE_TRIM { -0.18, 0.18, 0.0 } // Get these values from G33 auto calibrate - - // Delta radius and diagonal rod adjustments (mm) - //#define DELTA_RADIUS_TRIM_TOWER { 0.0, 0.0, 0.0 } - //#define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 } - -#endif - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -//#define USE_XMIN_PLUG -//#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG // a Z probe -#define USE_XMAX_PLUG -#define USE_YMAX_PLUG -#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -// delta speeds must be the same on xyz -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -// variables to calculate steps -#define XYZ_FULL_STEPS_PER_ROTATION 200 -#define XYZ_MICROSTEPS 16 -#define XYZ_BELT_PITCH 2 -#define XYZ_PULLEY_TEETH 20 - -// delta speeds must be the same on xyz -#define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH)) -#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 376.04 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 25000, 25000, 25000, 5000 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 9000, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 5000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 5000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK DEFAULT_XJERK - #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.008 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -/** - * Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe - * Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN. - */ -//#define Z_PROBE_ALLEN_KEY - -#if ENABLED(Z_PROBE_ALLEN_KEY) - // 2 or 3 sets of coordinates for deploying and retracting the spring loaded touch probe on G29, - // if servo actuated touch probe is not defined. Uncomment as appropriate for your printer/probe. - - #define Z_PROBE_ALLEN_KEY_DEPLOY_1 { 30.0, DELTA_PRINTABLE_RADIUS, 100.0 } - #define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE XY_PROBE_SPEED - - #define Z_PROBE_ALLEN_KEY_DEPLOY_2 { 0.0, DELTA_PRINTABLE_RADIUS, 100.0 } - #define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE (XY_PROBE_SPEED)/10 - - #define Z_PROBE_ALLEN_KEY_DEPLOY_3 { 0.0, (DELTA_PRINTABLE_RADIUS) * 0.75, 100.0 } - #define Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE XY_PROBE_SPEED - - #define Z_PROBE_ALLEN_KEY_STOW_1 { -64.0, 56.0, 23.0 } // Move the probe into position - #define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE XY_PROBE_SPEED - - #define Z_PROBE_ALLEN_KEY_STOW_2 { -64.0, 56.0, 3.0 } // Push it down - #define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (XY_PROBE_SPEED)/10 - - #define Z_PROBE_ALLEN_KEY_STOW_3 { -64.0, 56.0, 50.0 } // Move it up to clear - #define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE XY_PROBE_SPEED - - #define Z_PROBE_ALLEN_KEY_STOW_4 { 0.0, 0.0, 50.0 } - #define Z_PROBE_ALLEN_KEY_STOW_4_FEEDRATE XY_PROBE_SPEED - -#endif // Z_PROBE_ALLEN_KEY - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 0, 20, -1.10 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 20 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 4000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 2 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 2 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR true -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 15 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR 1 // deltas always home to max -#define Y_HOME_DIR 1 -#define Z_HOME_DIR 1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE ((DELTA_PRINTABLE_RADIUS) * 2) -#define Y_BED_SIZE ((DELTA_PRINTABLE_RADIUS) * 2) - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS -(DELTA_PRINTABLE_RADIUS) -#define Y_MIN_POS -(DELTA_PRINTABLE_RADIUS) -#define Z_MIN_POS 0 -#define X_MAX_POS DELTA_PRINTABLE_RADIUS -#define Y_MAX_POS DELTA_PRINTABLE_RADIUS -#define Z_MAX_POS MANUAL_Z_HOME_POS - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -//#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - //#define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - // Works best with 5 or more points in each dimension. - #define GRID_MAX_POINTS_X 7 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -#define MANUAL_Z_HOME_POS DELTA_HEIGHT // Distance between the nozzle to printbed after homing - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Delta only homes to Z -#define HOMING_FEEDRATE_Z (200*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 195 -#define PREHEAT_1_TEMP_BED 60 -#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 100 -#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { 0, 0, (DELTA_HEIGHT - 10) } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -//#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/config/examples/delta/Tevo Little Monster/Configuration_adv.h deleted file mode 100644 index d124a28c4e..0000000000 --- a/config/examples/delta/Tevo Little Monster/Configuration_adv.h +++ /dev/null @@ -1,2933 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 60 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 10 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN HEATER_1_PIN -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 5 // deltas need the same for all three axes -#define HOMING_BUMP_DIVISOR { 10, 10, 10 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - #define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 0 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -// (don't use SLOWDOWN with DELTA because DELTA generates hundreds of segments per second) -//#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE_XYZ 50*60 - #define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE false // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G27" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -//#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 1 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/delta/generic/Configuration.h b/config/examples/delta/generic/Configuration.h deleted file mode 100644 index ebcefd9da9..0000000000 --- a/config/examples/delta/generic/Configuration.h +++ /dev/null @@ -1,2325 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Deltabot" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 -1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 0 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - #define DEFAULT_Kp 22.2 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Delta Settings ============================= -//=========================================================================== -// Enable DELTA kinematics and most of the default configuration for Deltas -#define DELTA - -#if ENABLED(DELTA) - - // Make delta curves from many straight lines (linear interpolation). - // This is a trade-off between visible corners (not enough segments) - // and processor overload (too many expensive sqrt calls). - #define DELTA_SEGMENTS_PER_SECOND 200 - - // After homing move down to a height where XY movement is unconstrained - //#define DELTA_HOME_TO_SAFE_ZONE - - // Delta calibration menu - // uncomment to add three points calibration menu option. - // See http://minow.blogspot.com/index.html#4918805519571907051 - //#define DELTA_CALIBRATION_MENU - - // uncomment to add G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results) - //#define DELTA_AUTO_CALIBRATION - - // NOTE NB all values for DELTA_* values MUST be floating point, so always have a decimal point in them - - #if ENABLED(DELTA_AUTO_CALIBRATION) - // set the default number of probe points : n*n (1 -> 7) - #define DELTA_CALIBRATION_DEFAULT_POINTS 4 - #endif - - #if EITHER(DELTA_AUTO_CALIBRATION, DELTA_CALIBRATION_MENU) - // Set the steprate for papertest probing - #define PROBE_MANUALLY_STEP 0.05 // (mm) - #endif - - // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). - #define DELTA_PRINTABLE_RADIUS 140.0 // (mm) - - // Center-to-center distance of the holes in the diagonal push rods. - #define DELTA_DIAGONAL_ROD 250.0 // (mm) - - // Distance between bed and nozzle Z home position - #define DELTA_HEIGHT 250.00 // (mm) Get this value from G33 auto calibrate - - #define DELTA_ENDSTOP_ADJ { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate - - // Horizontal distance bridged by diagonal push rods when effector is centered. - #define DELTA_RADIUS 124.0 // (mm) Get this value from G33 auto calibrate - - // Trim adjustments for individual towers - // tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0 - // measured in degrees anticlockwise looking from above the printer - #define DELTA_TOWER_ANGLE_TRIM { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate - - // Delta radius and diagonal rod adjustments (mm) - //#define DELTA_RADIUS_TRIM_TOWER { 0.0, 0.0, 0.0 } - //#define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 } - -#endif - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -//#define USE_XMIN_PLUG -//#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG // a Z probe -#define USE_XMAX_PLUG -#define USE_YMAX_PLUG -#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -// delta speeds must be the same on xyz -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -// variables to calculate steps -#define XYZ_FULL_STEPS_PER_ROTATION 200 -#define XYZ_MICROSTEPS 16 -#define XYZ_BELT_PITCH 2 -#define XYZ_PULLEY_TEETH 20 - -// delta speeds must be the same on xyz -#define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH)) -#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 760*1.1 } // default steps per unit for Kossel (GT2, 20 tooth) - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 500, 500, 500, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 9000, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK DEFAULT_XJERK - #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -/** - * Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe - * Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN. - */ -//#define Z_PROBE_ALLEN_KEY - -#if ENABLED(Z_PROBE_ALLEN_KEY) - // 2 or 3 sets of coordinates for deploying and retracting the spring loaded touch probe on G29, - // if servo actuated touch probe is not defined. Uncomment as appropriate for your printer/probe. - - #define Z_PROBE_ALLEN_KEY_DEPLOY_1 { 30.0, DELTA_PRINTABLE_RADIUS, 100.0 } - #define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE XY_PROBE_SPEED - - #define Z_PROBE_ALLEN_KEY_DEPLOY_2 { 0.0, DELTA_PRINTABLE_RADIUS, 100.0 } - #define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE (XY_PROBE_SPEED)/10 - - #define Z_PROBE_ALLEN_KEY_DEPLOY_3 { 0.0, (DELTA_PRINTABLE_RADIUS) * 0.75, 100.0 } - #define Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE XY_PROBE_SPEED - - #define Z_PROBE_ALLEN_KEY_STOW_1 { -64.0, 56.0, 23.0 } // Move the probe into position - #define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE XY_PROBE_SPEED - - #define Z_PROBE_ALLEN_KEY_STOW_2 { -64.0, 56.0, 3.0 } // Push it down - #define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (XY_PROBE_SPEED)/10 - - #define Z_PROBE_ALLEN_KEY_STOW_3 { -64.0, 56.0, 50.0 } // Move it up to clear - #define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE XY_PROBE_SPEED - - #define Z_PROBE_ALLEN_KEY_STOW_4 { 0.0, 0.0, 50.0 } - #define Z_PROBE_ALLEN_KEY_STOW_4_FEEDRATE XY_PROBE_SPEED - -#endif // Z_PROBE_ALLEN_KEY - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 0, -10, -3.5 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 4000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR false -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR 1 // deltas always home to max -#define Y_HOME_DIR 1 -#define Z_HOME_DIR 1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE ((DELTA_PRINTABLE_RADIUS) * 2) -#define Y_BED_SIZE ((DELTA_PRINTABLE_RADIUS) * 2) - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS -(DELTA_PRINTABLE_RADIUS) -#define Y_MIN_POS -(DELTA_PRINTABLE_RADIUS) -#define Z_MIN_POS 0 -#define X_MAX_POS DELTA_PRINTABLE_RADIUS -#define Y_MAX_POS DELTA_PRINTABLE_RADIUS -#define Z_MAX_POS MANUAL_Z_HOME_POS - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - //#define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - // Works best with 5 or more points in each dimension. - #define GRID_MAX_POINTS_X 9 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -#define MANUAL_Z_HOME_POS DELTA_HEIGHT // Distance between the nozzle to printbed after homing - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Delta only homes to Z -#define HOMING_FEEDRATE_Z (200*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 100 -#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), 0, 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -//#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/delta/generic/Configuration_adv.h b/config/examples/delta/generic/Configuration_adv.h deleted file mode 100644 index a3379353fc..0000000000 --- a/config/examples/delta/generic/Configuration_adv.h +++ /dev/null @@ -1,2933 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 5 // deltas need the same for all three axes -#define HOMING_BUMP_DIVISOR { 10, 10, 10 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 60 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -// (don't use SLOWDOWN with DELTA because DELTA generates hundreds of segments per second) -//#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE_XYZ 50*60 - #define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -//#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 1 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/delta/kossel_clear/Configuration.h b/config/examples/delta/kossel_clear/Configuration.h deleted file mode 100644 index bdcbaf1526..0000000000 --- a/config/examples/delta/kossel_clear/Configuration.h +++ /dev/null @@ -1,2331 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(John Ecker, Kossel Clear)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EEB -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Kossel Clear 121519" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -#define MACHINE_UUID "4e9a4ab2-1c30-11ea-978f-2e728ce88125" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 1 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - #define DEFAULT_Kp 22.2 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Delta Settings ============================= -//=========================================================================== -// Enable DELTA kinematics and most of the default configuration for Deltas -#define DELTA - -#if ENABLED(DELTA) - - // Make delta curves from many straight lines (linear interpolation). - // This is a trade-off between visible corners (not enough segments) - // and processor overload (too many expensive sqrt calls). - #define DELTA_SEGMENTS_PER_SECOND 160 - - // After homing move down to a height where XY movement is unconstrained - #define DELTA_HOME_TO_SAFE_ZONE - - // Delta calibration menu - // uncomment to add three points calibration menu option. - // See http://minow.blogspot.com/index.html#4918805519571907051 - #define DELTA_CALIBRATION_MENU - - // uncomment to add G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results) - #define DELTA_AUTO_CALIBRATION - - - #if ENABLED(DELTA_AUTO_CALIBRATION) - // set the default number of probe points : n*n (1 -> 7) - #define DELTA_CALIBRATION_DEFAULT_POINTS 2 - #endif - - #if EITHER(DELTA_AUTO_CALIBRATION, DELTA_CALIBRATION_MENU) - // Set the steprate for papertest probing - #define PROBE_MANUALLY_STEP 0.05 // (mm) - #endif - - // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). - #define DELTA_PRINTABLE_RADIUS 100// (mm) - - // Center-to-center distance of the holes in the diagonal push rods. - #define DELTA_DIAGONAL_ROD 290.5 // (mm) Kossel Clear OG Settings - - // Distance between bed and nozzle Z home position - #define DELTA_HEIGHT 283.8 // (mm) Get this value from G33 auto calibrate - - #define DELTA_ENDSTOP_ADJ { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate - -// Horizontal offset from middle of printer to smooth rod center. (ORGINAL FIRMWARE VALUE) -//#define DELTA_SMOOTH_ROD_OFFSET 220.0 // mm (ORGINAL FIRMWARE VALUE) - -// Horizontal offset of the universal joints on the end effector. (ORGINAL FIRMWARE VALUE) -//#define DELTA_EFFECTOR_OFFSET 33 // mm (ORGINAL FIRMWARE VALUE) - -// Horizontal offset of the universal joints on the carriages. (ORGINAL FIRMWARE VALUE) -//#define DELTA_CARRIAGE_OFFSET 28 // mm (ORGINAL FIRMWARE VALUE) - -// Effective horizontal distance bridged by diagonal push rods. (ORGINAL FIRMWARE VALUE) -//#define DELTA_RADIUS (DELTA_SMOOTH_ROD_OFFSET-DELTA_EFFECTOR_OFFSET-DELTA_CARRIAGE_OFFSET)=159.0 (ORGINAL FIRMWARE VALUE) - - // Horizontal distance bridged by diagonal push rods when effector is centered. - #define DELTA_RADIUS 159.0 // (mm) Get this value from G33 auto calibrate - - // Trim adjustments for individual towers - // tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0 - // measured in degrees anticlockwise looking from above the printer - #define DELTA_TOWER_ANGLE_TRIM {0.0, 0.0, -0.584 } // Get these values from G33 auto calibrate - - // Delta radius and diagonal rod adjustments (mm) - //#define DELTA_RADIUS_TRIM_TOWER { 0.0, 0.0, 0.0 } - //#define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 } - -#endif - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -//#define USE_XMIN_PLUG -//#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG // a Z probe -#define USE_XMAX_PLUG -#define USE_YMAX_PLUG -#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -#define X_DRIVER_TYPE A4988 -#define Y_DRIVER_TYPE A4988 -#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -// delta speeds must be the same on xyz -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -// variables to calculate steps -#define XYZ_FULL_STEPS_PER_ROTATION 200 -#define XYZ_MICROSTEPS 16 -#define XYZ_BELT_PITCH 2 -#define XYZ_PULLEY_TEETH 20 - -// delta speeds must be the same on xyz -#define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH)) -#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 100 } // default steps per unit for Kossel (GT2, 20 tooth) - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 200, 200, 200, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 200, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 3000, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 8.0 - #define DEFAULT_YJERK DEFAULT_XJERK - #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -/** - * Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe - * Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN. - */ -//#define Z_PROBE_ALLEN_KEY - -#if ENABLED(Z_PROBE_ALLEN_KEY) - // 2 or 3 sets of coordinates for deploying and retracting the spring loaded touch probe on G29, - // if servo actuated touch probe is not defined. Uncomment as appropriate for your printer/probe. - - #define Z_PROBE_ALLEN_KEY_DEPLOY_1 { 30.0, DELTA_PRINTABLE_RADIUS, 100.0 } - #define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE XY_PROBE_SPEED - - #define Z_PROBE_ALLEN_KEY_DEPLOY_2 { 0.0, DELTA_PRINTABLE_RADIUS, 100.0 } - #define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE (XY_PROBE_SPEED)/10 - - #define Z_PROBE_ALLEN_KEY_DEPLOY_3 { 0.0, (DELTA_PRINTABLE_RADIUS) * 0.75, 100.0 } - #define Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE XY_PROBE_SPEED - - #define Z_PROBE_ALLEN_KEY_STOW_1 { -64.0, 56.0, 23.0 } // Move the probe into position - #define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE XY_PROBE_SPEED - - #define Z_PROBE_ALLEN_KEY_STOW_2 { -64.0, 56.0, 3.0 } // Push it down - #define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (XY_PROBE_SPEED)/10 - - #define Z_PROBE_ALLEN_KEY_STOW_3 { -64.0, 56.0, 50.0 } // Move it up to clear - #define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE XY_PROBE_SPEED - - #define Z_PROBE_ALLEN_KEY_STOW_4 { 0.0, 0.0, 50.0 } - #define Z_PROBE_ALLEN_KEY_STOW_4_FEEDRATE XY_PROBE_SPEED - -#endif // Z_PROBE_ALLEN_KEY - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ - //BL Touch with John Ecker Custom Mount -#define NOZZLE_TO_PROBE_OFFSET { 0, -29, -3.4 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 1 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 50 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -10 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -#define DELAY_BEFORE_PROBING 375 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -//#define DISABLE_X false -//#define DISABLE_Y false -//#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR false -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR 1 // deltas always home to max -#define Y_HOME_DIR 1 -#define Z_HOME_DIR 1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE ((DELTA_PRINTABLE_RADIUS) * 2) -#define Y_BED_SIZE ((DELTA_PRINTABLE_RADIUS) * 2) - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS -(DELTA_PRINTABLE_RADIUS) -#define Y_MIN_POS -(DELTA_PRINTABLE_RADIUS) -#define Z_MIN_POS 0 -#define X_MAX_POS DELTA_PRINTABLE_RADIUS -#define Y_MAX_POS DELTA_PRINTABLE_RADIUS -#define Z_MAX_POS MANUAL_Z_HOME_POS - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - //#define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - // Works best with 5 or more points in each dimension. - #define GRID_MAX_POINTS_X 5 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 0 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 5 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - #define UBL_Z_RAISE_WHEN_OFF_MESH 0 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 5 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -#define MANUAL_Z_HOME_POS DELTA_HEIGHT // Distance between the nozzle to printbed after homing - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Delta only homes to Z -#define HOMING_FEEDRATE_Z (60*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - #define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 60 -#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 70 -#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { 0, 0, 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 10 -#define LCD_FEEDBACK_FREQUENCY_HZ 50 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -#define NUM_SERVOS 1 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/delta/kossel_clear/Configuration_adv.h b/config/examples/delta/kossel_clear/Configuration_adv.h deleted file mode 100644 index f62cb2a711..0000000000 --- a/config/examples/delta/kossel_clear/Configuration_adv.h +++ /dev/null @@ -1,2933 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -//#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 5 // deltas need the same for all three axes -#define HOMING_BUMP_DIVISOR { 10, 10, 10 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 60 -#define DISABLE_INACTIVE_X false -#define DISABLE_INACTIVE_Y false -#define DISABLE_INACTIVE_Z false // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -// (don't use SLOWDOWN with DELTA because DELTA generates hundreds of segments per second) -//#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE_XYZ 50*60 - #define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -#define LCD_TIMEOUT_TO_STATUS 60000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - #define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 1 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - #define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - #define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -//#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -//#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - #define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/delta/kossel_mini/Configuration.h b/config/examples/delta/kossel_mini/Configuration.h deleted file mode 100644 index 805ed4f26c..0000000000 --- a/config/examples/delta/kossel_mini/Configuration.h +++ /dev/null @@ -1,2327 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Mini Kossel" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 7 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 11 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 5 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - #define DEFAULT_Kp 22.2 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Delta Settings ============================= -//=========================================================================== -// Enable DELTA kinematics and most of the default configuration for Deltas -#define DELTA - -#if ENABLED(DELTA) - - // Make delta curves from many straight lines (linear interpolation). - // This is a trade-off between visible corners (not enough segments) - // and processor overload (too many expensive sqrt calls). - #define DELTA_SEGMENTS_PER_SECOND 200 - - // After homing move down to a height where XY movement is unconstrained - //#define DELTA_HOME_TO_SAFE_ZONE - - // Delta calibration menu - // uncomment to add three points calibration menu option. - // See http://minow.blogspot.com/index.html#4918805519571907051 - //#define DELTA_CALIBRATION_MENU - - // uncomment to add G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results) - //#define DELTA_AUTO_CALIBRATION - - // NOTE NB all values for DELTA_* values MUST be floating point, so always have a decimal point in them - - #if ENABLED(DELTA_AUTO_CALIBRATION) - // set the default number of probe points : n*n (1 -> 7) - #define DELTA_CALIBRATION_DEFAULT_POINTS 4 - #endif - - #if EITHER(DELTA_AUTO_CALIBRATION, DELTA_CALIBRATION_MENU) - // Set the steprate for papertest probing - #define PROBE_MANUALLY_STEP 0.05 // (mm) - #endif - - // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). - #define DELTA_PRINTABLE_RADIUS 90.0 // (mm) - - // Center-to-center distance of the holes in the diagonal push rods. - #define DELTA_DIAGONAL_ROD 215.0 // (mm) - - // Distance between bed and nozzle Z home position - #define DELTA_HEIGHT 250.00 // (mm) Get this value from G33 auto calibrate - - #define DELTA_ENDSTOP_ADJ { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate - - // Horizontal distance bridged by diagonal push rods when effector is centered. - #define DELTA_RADIUS 105.2 // (mm) Get this value from G33 auto calibrate - - // Trim adjustments for individual towers - // tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0 - // measured in degrees anticlockwise looking from above the printer - #define DELTA_TOWER_ANGLE_TRIM { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate - - // Delta radius and diagonal rod adjustments (mm) - //#define DELTA_RADIUS_TRIM_TOWER { 0.0, 0.0, 0.0 } - //#define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 } - -#endif - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -//#define USE_XMIN_PLUG -//#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG // a Z probe -#define USE_XMAX_PLUG -#define USE_YMAX_PLUG -#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -// delta speeds must be the same on xyz -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -// variables to calculate steps -#define XYZ_FULL_STEPS_PER_ROTATION 200 -#define XYZ_MICROSTEPS 16 -#define XYZ_BELT_PITCH 2 -#define XYZ_PULLEY_TEETH 20 - -// delta speeds must be the same on xyz -#define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH)) -#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 760*1.1 } // default steps per unit for Kossel (GT2, 20 tooth) - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 500, 500, 500, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 9000, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK DEFAULT_XJERK - #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -/** - * Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe - * Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN. - */ -#define Z_PROBE_ALLEN_KEY - -#if ENABLED(Z_PROBE_ALLEN_KEY) - // 2 or 3 sets of coordinates for deploying and retracting the spring loaded touch probe on G29, - // if servo actuated touch probe is not defined. Uncomment as appropriate for your printer/probe. - - // Kossel Mini - #define Z_PROBE_ALLEN_KEY_DEPLOY_1 { 30.0, DELTA_PRINTABLE_RADIUS, 100.0 } - #define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE XY_PROBE_SPEED - - #define Z_PROBE_ALLEN_KEY_DEPLOY_2 { 0.0, DELTA_PRINTABLE_RADIUS, 100.0 } - #define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE (XY_PROBE_SPEED)/10 - - #define Z_PROBE_ALLEN_KEY_DEPLOY_3 { 0.0, (DELTA_PRINTABLE_RADIUS) * 0.75, 100.0 } - #define Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE XY_PROBE_SPEED - - #define Z_PROBE_ALLEN_KEY_STOW_DEPTH 20 - #define Z_PROBE_ALLEN_KEY_STOW_1 { -64.0, 56.0, 23.0 } // Move the probe into position - #define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE XY_PROBE_SPEED - // Move the nozzle down further to push the probe into retracted position. - #define Z_PROBE_ALLEN_KEY_STOW_2 { -64.0, 56.0, 23.0-(Z_PROBE_ALLEN_KEY_STOW_DEPTH) } - #define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (XY_PROBE_SPEED)/10 - // Raise things back up slightly so we don't bump into anything - #define Z_PROBE_ALLEN_KEY_STOW_3 { -64.0, 56.0, 23.0+(Z_PROBE_ALLEN_KEY_STOW_DEPTH) } - #define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE (XY_PROBE_SPEED)/2 - - #define Z_PROBE_ALLEN_KEY_STOW_4 { 0.0, 0.0, 23.0+(Z_PROBE_ALLEN_KEY_STOW_DEPTH) } - #define Z_PROBE_ALLEN_KEY_STOW_4_FEEDRATE XY_PROBE_SPEED - -#endif // Z_PROBE_ALLEN_KEY - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 0, -10, -3.5 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 4000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 50 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR false -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 15 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR 1 // deltas always home to max -#define Y_HOME_DIR 1 -#define Z_HOME_DIR 1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE ((DELTA_PRINTABLE_RADIUS) * 2) -#define Y_BED_SIZE ((DELTA_PRINTABLE_RADIUS) * 2) - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS -(DELTA_PRINTABLE_RADIUS) -#define Y_MIN_POS -(DELTA_PRINTABLE_RADIUS) -#define Z_MIN_POS 0 -#define X_MAX_POS DELTA_PRINTABLE_RADIUS -#define Y_MAX_POS DELTA_PRINTABLE_RADIUS -#define Z_MAX_POS MANUAL_Z_HOME_POS - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - //#define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - // Works best with 5 or more points in each dimension. - #define GRID_MAX_POINTS_X 9 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -#define MANUAL_Z_HOME_POS DELTA_HEIGHT // Distance between the nozzle to printbed after homing - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Delta only homes to Z -#define HOMING_FEEDRATE_Z (200*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 100 -#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), 0, 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -//#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/delta/kossel_mini/Configuration_adv.h b/config/examples/delta/kossel_mini/Configuration_adv.h deleted file mode 100644 index a3379353fc..0000000000 --- a/config/examples/delta/kossel_mini/Configuration_adv.h +++ /dev/null @@ -1,2933 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 5 // deltas need the same for all three axes -#define HOMING_BUMP_DIVISOR { 10, 10, 10 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 60 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -// (don't use SLOWDOWN with DELTA because DELTA generates hundreds of segments per second) -//#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE_XYZ 50*60 - #define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -//#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 1 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/delta/kossel_pro/Configuration.h b/config/examples/delta/kossel_pro/Configuration.h deleted file mode 100644 index 0c8f9f0ddf..0000000000 --- a/config/examples/delta/kossel_pro/Configuration.h +++ /dev/null @@ -1,2327 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Example configuration file for OpenBeam Kossel Pro - */ - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 115200 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_BRAINWAVE_PRO -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Kossel Pro" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 5 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 5 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX 125 // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 50 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // Kossel Pro - #define DEFAULT_Kp 19.30 - #define DEFAULT_Ki 3.51 - #define DEFAULT_Kd 26.56 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //Kossel Pro heated bed plate with borosilicate glass - //from pidautotune (M303 E-1 S60 C8) - #define DEFAULT_bedKp 370.25 - #define DEFAULT_bedKi 62.77 - #define DEFAULT_bedKd 545.98 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Delta Settings ============================= -//=========================================================================== -// Enable DELTA kinematics and most of the default configuration for Deltas -#define DELTA - -#if ENABLED(DELTA) - - // Make delta curves from many straight lines (linear interpolation). - // This is a trade-off between visible corners (not enough segments) - // and processor overload (too many expensive sqrt calls). - #define DELTA_SEGMENTS_PER_SECOND 160 - - // After homing move down to a height where XY movement is unconstrained - //#define DELTA_HOME_TO_SAFE_ZONE - - // Delta calibration menu - // uncomment to add three points calibration menu option. - // See http://minow.blogspot.com/index.html#4918805519571907051 - //#define DELTA_CALIBRATION_MENU - - // uncomment to add G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results) - //#define DELTA_AUTO_CALIBRATION - - // NOTE NB all values for DELTA_* values MUST be floating point, so always have a decimal point in them - - #if ENABLED(DELTA_AUTO_CALIBRATION) - // set the default number of probe points : n*n (1 -> 7) - #define DELTA_CALIBRATION_DEFAULT_POINTS 4 - #endif - - #if EITHER(DELTA_AUTO_CALIBRATION, DELTA_CALIBRATION_MENU) - // Set the steprate for papertest probing - #define PROBE_MANUALLY_STEP 0.05 // (mm) - #endif - - // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). - #define DELTA_PRINTABLE_RADIUS 127.0 // (mm) - - // Center-to-center distance of the holes in the diagonal push rods. - #define DELTA_DIAGONAL_ROD 301.0 // (mm) - - // Distance between bed and nozzle Z home position - #define DELTA_HEIGHT 277.00 // (mm) Get this value from G33 auto calibrate - - #define DELTA_ENDSTOP_ADJ { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate - - // Horizontal distance bridged by diagonal push rods when effector is centered. - #define DELTA_RADIUS 152.357 // (mm) Get this value from G33 auto calibrate - - // Trim adjustments for individual towers - // tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0 - // measured in degrees anticlockwise looking from above the printer - #define DELTA_TOWER_ANGLE_TRIM { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate - - // Delta radius and diagonal rod adjustments (mm) - //#define DELTA_RADIUS_TRIM_TOWER { 0.0, 0.0, 0.0 } - //#define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 } - -#endif - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -//#define USE_XMIN_PLUG -//#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG // a Z probe -#define USE_XMAX_PLUG -#define USE_YMAX_PLUG -#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -#define XYZ_FULL_STEPS_PER_ROTATION 200 -#define XYZ_MICROSTEPS 32 -#define XYZ_BELT_PITCH 2 -#define XYZ_PULLEY_TEETH 20 - -// delta speeds must be the same on xyz -#define XYZ_STEPS ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH)) - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -// variables to calculate steps -#define XYZ_FULL_STEPS_PER_ROTATION 200 -#define XYZ_MICROSTEPS 32 -#define XYZ_BELT_PITCH 2 -#define XYZ_PULLEY_TEETH 20 - -// delta speeds must be the same on xyz -#define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH)) -#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 184.8 } // default steps per unit for Kossel (GT2, 20 tooth) - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 200, 200, 200, 200 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 9000, 9000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK DEFAULT_XJERK - #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -/** - * Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe - * Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN. - */ -#define Z_PROBE_ALLEN_KEY - -#if ENABLED(Z_PROBE_ALLEN_KEY) - // 2 or 3 sets of coordinates for deploying and retracting the spring loaded touch probe on G29, - // if servo actuated touch probe is not defined. Uncomment as appropriate for your printer/probe. - - // Kossel Pro - #define Z_PROBE_ALLEN_KEY_DEPLOY_1 { -105.00, 0.00, 100.0 } // Move left but not quite so far that we'll bump the belt - #define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE XY_PROBE_SPEED - - #define Z_PROBE_ALLEN_KEY_DEPLOY_2 { -110.00, -125.00, 100.0 } // Move outward to position deploy pin to the left of the arm - #define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE XY_PROBE_SPEED - - #define Z_PROBE_ALLEN_KEY_DEPLOY_3 { -110.00 * 0.75, -125.00 * 0.75, 100.0 } - #define Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE XY_PROBE_SPEED - - #define Z_PROBE_ALLEN_KEY_DEPLOY_4 { 45.00, -125.00, 100.0 } // Move right to trigger deploy pin - #define Z_PROBE_ALLEN_KEY_DEPLOY_4_FEEDRATE (XY_PROBE_SPEED)/2 - - #define Z_PROBE_ALLEN_KEY_STOW_1 { 36.00, -125.00, 75.0 } // Line up with bed retaining clip - #define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE XY_PROBE_SPEED - - #define Z_PROBE_ALLEN_KEY_STOW_2 { 36.00, -125.00, 0.0 } // move down to retract probe - #define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (XY_PROBE_SPEED)/2 - - #define Z_PROBE_ALLEN_KEY_STOW_3 { 0.0, 0.0, 100.0 } // return to 0,0,100 - #define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE XY_PROBE_SPEED - - #define Z_PROBE_ALLEN_KEY_STOW_4 { 0.0, 0.0, 100.0 } - #define Z_PROBE_ALLEN_KEY_STOW_4_FEEDRATE XY_PROBE_SPEED - -#endif // Z_PROBE_ALLEN_KEY - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { -23, -6, -17.25 } // KosselPro actual: -22.919, -6.304, -17.45 -/** - * Kossel Pro note: The correct value is likely -17.45 but I'd rather err on the side of - * not giving someone a head crash. Use something like G29 Z-0.2 to adjust as needed. - */ - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 100 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset - -#define Z_PROBE_OFFSET_RANGE_MIN -15 -#define Z_PROBE_OFFSET_RANGE_MAX 5 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR true -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR 1 // deltas always home to max -#define Y_HOME_DIR 1 -#define Z_HOME_DIR 1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE ((DELTA_PRINTABLE_RADIUS) * 2) -#define Y_BED_SIZE ((DELTA_PRINTABLE_RADIUS) * 2) - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS -(DELTA_PRINTABLE_RADIUS) -#define Y_MIN_POS -(DELTA_PRINTABLE_RADIUS) -#define Z_MIN_POS 0 -#define X_MAX_POS DELTA_PRINTABLE_RADIUS -#define Y_MAX_POS DELTA_PRINTABLE_RADIUS -#define Z_MAX_POS MANUAL_Z_HOME_POS - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - //#define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - // Works best with 5 or more points in each dimension. - #define GRID_MAX_POINTS_X 7 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -#define MANUAL_Z_HOME_POS DELTA_HEIGHT // Distance between the nozzle to printbed after homing - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Delta only homes to Z -#define HOMING_FEEDRATE_Z (200*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 100 -#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), 0, 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/delta/kossel_pro/README.md b/config/examples/delta/kossel_pro/README.md deleted file mode 100644 index 37b5ccf07f..0000000000 --- a/config/examples/delta/kossel_pro/README.md +++ /dev/null @@ -1,5 +0,0 @@ -# Example Configuration for OpenBeam Kossel Pro [BRAINWAVE_PRO](http://www.openbeamusa.com/3d-printers/kossel/) -* Configuration files for the **Openbeam Kossel Pro** as delivered in their KickStarter distribution - -I [@Wackerbarth](https://github.com/Wackerbarth) tested this version on my Kossel Pro and Arduino 1.6.5 for Mac. -This configuration is a transition to merge Terence Tam's configuration with up-to-date Marlin source and a current Arduino IDE diff --git a/config/examples/delta/kossel_xl/Configuration.h b/config/examples/delta/kossel_xl/Configuration.h deleted file mode 100644 index 5735b60c02..0000000000 --- a/config/examples/delta/kossel_xl/Configuration.h +++ /dev/null @@ -1,2328 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(oxivanisher)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "Kossel k800XL" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH true // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 5 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 5 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - // oXis Kossel k800 XL - #define DEFAULT_Kp 22.04 - #define DEFAULT_Ki 1.65 - #define DEFAULT_Kd 73.67 - - // Kossel k800 XL - //#define DEFAULT_Kp 22.25 - //#define DEFAULT_Ki 1.45 - //#define DEFAULT_Kd 85.30 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 15.00 - #define DEFAULT_bedKi .04 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Delta Settings ============================= -//=========================================================================== -// Enable DELTA kinematics and most of the default configuration for Deltas -#define DELTA - -#if ENABLED(DELTA) - - // Make delta curves from many straight lines (linear interpolation). - // This is a trade-off between visible corners (not enough segments) - // and processor overload (too many expensive sqrt calls). - #define DELTA_SEGMENTS_PER_SECOND 160 - - // After homing move down to a height where XY movement is unconstrained - //#define DELTA_HOME_TO_SAFE_ZONE - - // Delta calibration menu - // uncomment to add three points calibration menu option. - // See http://minow.blogspot.com/index.html#4918805519571907051 - //#define DELTA_CALIBRATION_MENU - - // uncomment to add G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results) - //#define DELTA_AUTO_CALIBRATION - - // NOTE NB all values for DELTA_* values MUST be floating point, so always have a decimal point in them - - #if ENABLED(DELTA_AUTO_CALIBRATION) - // set the default number of probe points : n*n (1 -> 7) - #define DELTA_CALIBRATION_DEFAULT_POINTS 4 - #endif - - #if EITHER(DELTA_AUTO_CALIBRATION, DELTA_CALIBRATION_MENU) - // Set the steprate for papertest probing - #define PROBE_MANUALLY_STEP 0.05 // (mm) - #endif - - // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). - #define DELTA_PRINTABLE_RADIUS 140.0 // (mm) - - // Center-to-center distance of the holes in the diagonal push rods. - #define DELTA_DIAGONAL_ROD 319.5 // (mm) - - // Distance between bed and nozzle Z home position - #define DELTA_HEIGHT 380.00 // (mm) Get this value from G33 auto calibrate - - #define DELTA_ENDSTOP_ADJ { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate - - // Horizontal distance bridged by diagonal push rods when effector is centered. - #define DELTA_RADIUS 174.1 // (mm) Get this value from G33 auto calibrate - - // Trim adjustments for individual towers - // tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0 - // measured in degrees anticlockwise looking from above the printer - #define DELTA_TOWER_ANGLE_TRIM { 0.0, 0.0, 0.0 } // Get these values from G33 auto calibrate - - // Delta radius and diagonal rod adjustments (mm) - //#define DELTA_RADIUS_TRIM_TOWER { 0.0, 0.0, 0.0 } - //#define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 } - -#endif - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -//#define USE_XMIN_PLUG -//#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG // a Z probe -#define USE_XMAX_PLUG -#define USE_YMAX_PLUG -#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -//#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - #define ENDSTOPPULLUP_XMAX - #define ENDSTOPPULLUP_YMAX - #define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - #define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -// variables to calculate steps -#define XYZ_FULL_STEPS_PER_ROTATION 200 -#define XYZ_MICROSTEPS 16 -#define XYZ_BELT_PITCH 2 -#define XYZ_PULLEY_TEETH 16 - -// delta speeds must be the same on xyz -#define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH)) -#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 158 } // default steps per unit for PowerWasp - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 200, 200, 200, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 9000, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 2000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK DEFAULT_XJERK - #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 20.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -/** - * Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe - * Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN. - */ -//#define Z_PROBE_ALLEN_KEY - -#if ENABLED(Z_PROBE_ALLEN_KEY) - // 2 or 3 sets of coordinates for deploying and retracting the spring loaded touch probe on G29, - // if servo actuated touch probe is not defined. Uncomment as appropriate for your printer/probe. - - #define Z_PROBE_ALLEN_KEY_DEPLOY_1 { 30.0, DELTA_PRINTABLE_RADIUS, 100.0 } - #define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE XY_PROBE_SPEED - - #define Z_PROBE_ALLEN_KEY_DEPLOY_2 { 0.0, DELTA_PRINTABLE_RADIUS, 100.0 } - #define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE (XY_PROBE_SPEED)/10 - - #define Z_PROBE_ALLEN_KEY_DEPLOY_3 { 0.0, (DELTA_PRINTABLE_RADIUS) * 0.75, 100.0 } - #define Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE XY_PROBE_SPEED - - #define Z_PROBE_ALLEN_KEY_STOW_1 { -64.0, 56.0, 23.0 } // Move the probe into position - #define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE XY_PROBE_SPEED - - #define Z_PROBE_ALLEN_KEY_STOW_2 { -64.0, 56.0, 3.0 } // Push it down - #define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (XY_PROBE_SPEED)/10 - - #define Z_PROBE_ALLEN_KEY_STOW_3 { -64.0, 56.0, 50.0 } // Move it up to clear - #define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE XY_PROBE_SPEED - - #define Z_PROBE_ALLEN_KEY_STOW_4 { 0.0, 0.0, 50.0 } - #define Z_PROBE_ALLEN_KEY_STOW_4_FEEDRATE XY_PROBE_SPEED - -#endif // Z_PROBE_ALLEN_KEY - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 0.0, 0.0, 0.3 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 20 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 10 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 10 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR false -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR 1 // deltas always home to max -#define Y_HOME_DIR 1 -#define Z_HOME_DIR 1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE ((DELTA_PRINTABLE_RADIUS) * 2) -#define Y_BED_SIZE ((DELTA_PRINTABLE_RADIUS) * 2) - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS -(DELTA_PRINTABLE_RADIUS) -#define Y_MIN_POS -(DELTA_PRINTABLE_RADIUS) -#define Z_MIN_POS 0 -#define X_MAX_POS DELTA_PRINTABLE_RADIUS -#define Y_MAX_POS DELTA_PRINTABLE_RADIUS -#define Z_MAX_POS MANUAL_Z_HOME_POS - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -//#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - //#define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - // Works best with 5 or more points in each dimension. - #define GRID_MAX_POINTS_X 5 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -#define MANUAL_Z_HOME_POS DELTA_HEIGHT // Distance between the nozzle to printbed after homing - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Delta only homes to Z -#define HOMING_FEEDRATE_Z (60*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 100 -#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), 0, 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -//#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/delta/kossel_xl/Configuration_adv.h b/config/examples/delta/kossel_xl/Configuration_adv.h deleted file mode 100644 index 645994e4ae..0000000000 --- a/config/examples/delta/kossel_xl/Configuration_adv.h +++ /dev/null @@ -1,2933 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 2 -#define Y_HOME_BUMP_MM 2 -#define Z_HOME_BUMP_MM 2 // deltas need the same for all three axes -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -// (don't use SLOWDOWN with DELTA because DELTA generates hundreds of segments per second) -//#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE_XYZ 50*60 - #define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -//#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 1 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - //#define USER_DESC_5 "Home & Info" - //#define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/delta/kossel_xl/README.md b/config/examples/delta/kossel_xl/README.md deleted file mode 100644 index 1cabcdb3fe..0000000000 --- a/config/examples/delta/kossel_xl/README.md +++ /dev/null @@ -1,21 +0,0 @@ -# Configuration for Kossel k800 XL -This example configuration is for a Kossel XL with a printable bed diameter of 280mm and a height of 380mm. It also has the auto bed leveling probe (with an endstop switch) and the heated bed activated. - -## Configuration -You might need (or want) to edit at least the following settings in `Configuration.h`: -* `MANUAL_Z_HOME_POS` - The available height of your printing space. Auto Bed Leveling makes it less important to have the exact value. -* `DELTA_PRINTABLE_RADIUS` - The printable radius is how far from the center the nozzle can reach. -* `DEFAULT_AXIS_STEPS_PER_UNIT` - Steps-per-millimeter for the delta steppers, and for the extruder [to optimize the amount of filament flow](http://zennmaster.com/makingstuff/reprap-101-calibrating-your-extruder-part-1-e-steps). - -### Fine tuning -* Increase `DELTA_RADIUS` if the model comes out convex (with a bulge in the middle) -* Increase `DELTA_DIAGONAL_ROD` if the model comes out larger than expected - -### [http://reprap.org/wiki/PID_Tuning](PID Tuning) -* `DEFAULT_Kp` - The proportional term -* `DEFAULT_Ki` - The integral term -* `DEFAULT_Kd` - The derivative term - -### PSU Options -* The power supply is configured to 2 (to use a relay to switch 12V on and off) -* It is configured to be off by default diff --git a/config/examples/gCreate/gMax1.5+/Configuration.h b/config/examples/gCreate/gMax1.5+/Configuration.h deleted file mode 100644 index 5d9043be90..0000000000 --- a/config/examples/gCreate/gMax1.5+/Configuration.h +++ /dev/null @@ -1,2253 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - //#define MOTHERBOARD BOARD_RAMPS_14_EEF - #define MOTHERBOARD BOARD_RAMPS_14_EFB // gMax users please note: This is a Roxy modification. I print on glass and - // I use Marlin to control the bed's temperature. So, if you have a single nozzle - // machine, this will work fine for you. You just set the - // #define TEMP_SENSOR_BED 75 to 0 down below so Marlin doesn't mess with the bed - // temp. -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "gMax" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 5 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 75 // gMax-1.5+ users please note: This is a Roxy modification to the printer. I want - // to print on glass. And I'm using a 400mm x 400mm silicon heat pad powered through - // a Fortek SSR to do it. If you are using an unaltered gCreate machine, this needs - // to be set to 0 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 16 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 5 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 12 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 245 -#define HEATER_1_MAXTEMP 245 -#define HEATER_2_MAXTEMP 245 -#define HEATER_3_MAXTEMP 245 -#define HEATER_4_MAXTEMP 245 -#define HEATER_5_MAXTEMP 245 -#define BED_MAXTEMP 115 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // gMax J-Head - #define DEFAULT_Kp 15.35 - #define DEFAULT_Ki 0.85 - #define DEFAULT_Kd 69.45 - - // Ultimaker - //#define DEFAULT_Kp 22.2 - //#define DEFAULT_Ki 1.08 - //#define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 135.44 - #define DEFAULT_bedKi 24.60 - #define DEFAULT_bedKd 186.40 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -//#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -//#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 96 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 500, 500, 25, 25 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 800, 800, 700, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 400 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 400 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 8.5 - #define DEFAULT_YJERK 8.5 - #define DEFAULT_ZJERK 0.7 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 4.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.058 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { -17, -10, -0.25 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 45 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 7500 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 6 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 6 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR true -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -#define Z_HOMING_HEIGHT 10 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR 1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 420 // These numbers are not accurate for an unaltered gMax 1.5+ printer. My print bed -#define Y_BED_SIZE 420 // is inset a noticable amount from the edge of the bed. Combined with the inset, - // the nozzle can reach all cordinates of the mesh. - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 500 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -//#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - #define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.5 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.3 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - #define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 45 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - #define PROBE_PT_1_X 53 - #define PROBE_PT_1_Y 323 - #define PROBE_PT_2_X 53 - #define PROBE_PT_2_Y 63 - #define PROBE_PT_3_X 348 - #define PROBE_PT_3_Y 211 -#endif - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2 - 8) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2 - 4) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (60*60) -#define HOMING_FEEDRATE_Z (14*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -//#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 200 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -#define ENCODER_PULSES_PER_STEP 1 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -#define ENCODER_STEPS_PER_MENU_ITEM 5 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -#define NUM_SERVOS 2 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300, 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/config/examples/gCreate/gMax1.5+/Configuration_adv.h deleted file mode 100644 index 9710641199..0000000000 --- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 50 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 3 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 50 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 50 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 0 // usually set to 120 seconds -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G27" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - #define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 3 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 3 - - #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 32 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.5 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - //#define USER_DESC_5 "Home & Info" - //#define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/gCreate/gMax1.5+/_Bootscreen.h b/config/examples/gCreate/gMax1.5+/_Bootscreen.h deleted file mode 100644 index 19402c494d..0000000000 --- a/config/examples/gCreate/gMax1.5+/_Bootscreen.h +++ /dev/null @@ -1,101 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Custom Boot Screen bitmap - * - * Place this file in the root with your configuration files - * and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h. - * - * Use the Marlin Bitmap Converter to make your own: - * http://marlinfw.org/tools/u8glib/converter.html - */ - -#define CUSTOM_BOOTSCREEN_BMPWIDTH 112 - -const unsigned char custom_start_bmp[] PROGMEM = { - B11111111,B11111111,B11111111,B11111111,B11111110,B00000000,B00111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, - B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001, - B10000000,B00000000,B00000000,B00000000,B00000000,B00011000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001, - B10000000,B00000000,B00000000,B00000000,B00000000,B00011000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001, - B10000000,B00000000,B00000000,B00000000,B00000000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001, - B10000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001, - B10000000,B00000000,B00000000,B00000000,B00000000,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001, - B10000000,B00000000,B00000000,B00000000,B00000001,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001, - B10000000,B00000000,B00000000,B00000000,B00001111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001, - B10000000,B00000000,B00000000,B00000000,B00110001,B00000000,B00000000,B00000001,B11100000,B00000000,B00000000,B00000000,B00000000,B00000001, - B10000000,B00000000,B00000000,B00000001,B11111001,B00000000,B00000000,B00000011,B11111000,B00000000,B00000000,B00000001,B11000000,B00000001, - B10000000,B00000000,B00000000,B00000110,B01001101,B00000000,B00000000,B00000111,B00111000,B00000000,B00000000,B00000001,B11000000,B00000001, - B10000000,B00000000,B00000000,B00001100,B00100110,B00000000,B00000111,B01100111,B00111001,B11010011,B11100001,B11110011,B11100111,B11000001, - B10000000,B00000000,B00000000,B00011001,B00010010,B00000000,B00001111,B11100111,B00111001,B11110111,B11110011,B11111011,B11101111,B11100001, - B10000000,B00000000,B00000000,B00110111,B11001110,B00000000,B00001110,B11100111,B00000001,B11110111,B01110011,B10111001,B11001110,B11100001, - B10000000,B00000000,B00000000,B01100100,B01100110,B00000000,B00001110,B11100111,B00000001,B11000111,B11110011,B10111001,B11001111,B11100001, - B10000000,B00000000,B00000000,B01001011,B10100110,B00000000,B00001110,B11100111,B00111001,B11000111,B11110000,B11111001,B11001111,B11100001, - B10000000,B00000000,B00000000,B11001010,B10110100,B00000000,B00001111,B11100111,B00111001,B11000111,B00000011,B11111001,B11001110,B00000001, - B10000000,B00000000,B00000000,B11001101,B10100100,B00000000,B00000110,B11100111,B00111001,B11000111,B01110011,B10111001,B11001110,B11100001, - B10000000,B00000000,B00000011,B10100110,B01101100,B00000000,B00000000,B11100111,B00111001,B11000111,B01110011,B10111001,B11001110,B11100001, - B10000000,B00000000,B11111111,B00010011,B11011000,B00000000,B00001110,B11100011,B11110001,B11000111,B11110011,B11111001,B11101111,B11100001, - B10000000,B00000001,B00100001,B10001000,B00011000,B00000000,B00001111,B11100001,B11100001,B11000011,B11100001,B10111001,B11100111,B11000001, - B10000000,B00000110,B01100001,B00010110,B00110000,B00000000,B00000111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001, - B10000000,B00000100,B01000001,B00100011,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001, - B10000000,B00000100,B11111110,B01000001,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001, - B10000000,B00001011,B10000110,B10001111,B00000000,B00000000,B00000000,B00000000,B00111111,B00011111,B10000000,B00000000,B00000000,B00000001, - B10000000,B00011110,B00000001,B10011010,B00000000,B00000000,B00000000,B00000000,B00111111,B00011111,B10000000,B00000000,B00000000,B00000001, - B10000000,B00011100,B00000111,B00100010,B00000000,B00000000,B00000111,B10111100,B00111111,B10011111,B10000001,B11111000,B11110001,B11100001, - B10000000,B00001000,B00011111,B11100010,B00000000,B00000000,B00001111,B11111100,B00111111,B10111111,B10000111,B11111110,B01110001,B11000001, - B10000000,B00000000,B00110011,B01100010,B00000000,B00000000,B00001111,B00111100,B00111101,B10110111,B10000111,B10011110,B01111011,B11000001, - B10000000,B00000000,B11000010,B00100010,B00000000,B00000000,B00001111,B00111100,B00111101,B10110111,B10000111,B10011110,B01111011,B11000001, - B10000000,B00000000,B11000010,B00111110,B00000000,B00000000,B00001111,B00111100,B00111101,B11110111,B10000000,B01111110,B00111011,B10000001, - B10000000,B00000001,B11100110,B00011110,B00000000,B00000000,B00001111,B00111100,B00111101,B11110111,B10000011,B11111110,B00111111,B10000001, - B10000000,B00000001,B00111100,B00010010,B00000000,B00000000,B00001111,B00111100,B00111101,B11110111,B10000111,B10011110,B00111011,B10000001, - B10000000,B00000001,B00011100,B00100110,B00000000,B00000000,B00001111,B11111100,B00111101,B11110111,B10000111,B10011110,B01111011,B11000001, - B10000000,B00000001,B01110000,B01100100,B00000000,B00000000,B00000111,B10111100,B00111100,B11100111,B10000111,B10011110,B01111011,B11000001, - B10000000,B00000011,B11000000,B01011000,B00000000,B00000000,B00000000,B00111100,B00111100,B11100111,B10000111,B11111110,B01110001,B11000001, - B10000000,B00001101,B10000000,B11110000,B00000000,B00000000,B00001111,B00111100,B00111100,B11100111,B10000011,B11011110,B11110001,B11100001, - B10000000,B00011010,B00000000,B11100000,B00000000,B00000000,B00001111,B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001, - B10000000,B00100110,B00000000,B01000000,B00000000,B00000000,B00000011,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001, - B10000000,B01001100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001, - B10000000,B10110010,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001, - B10000001,B00000110,B00000000,B00000000,B00000000,B00000000,B00000111,B00011100,B00000011,B11000000,B00100000,B00010000,B00000000,B00000001, - B10000011,B00100100,B00000000,B00000000,B00000000,B00000000,B00001000,B10010010,B00000010,B00100000,B00000000,B00010000,B00000000,B00000001, - B00000010,B00100100,B00000000,B00000000,B00000000,B00000000,B00000000,B10010001,B00000010,B00100011,B00100111,B00111001,B10001100,B11100001, - B00000110,B00111000,B00000000,B00000000,B00000000,B00000000,B00000011,B00010001,B00000011,B11000010,B00100100,B10010010,B01001001,B00000001, - B00000100,B01010000,B00000000,B00000000,B00000000,B00000000,B00000000,B10010001,B00000010,B00000010,B00100100,B10010011,B11001000,B11000001, - B00001101,B10100000,B00000000,B00000000,B00000000,B00000000,B00001000,B10010010,B00000010,B00000010,B00100100,B10010010,B00001000,B00100001, - B00001000,B11100000,B00000000,B00000000,B00000000,B00000000,B00000111,B00011100,B00000010,B00000010,B00100100,B10011001,B11001001,B11000001, - B00011000,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001, - B00010000,B00110000,B00000000,B00011100,B00000000,B00000000,B00000000,B00001100,B00011000,B00001111,B11100000,B00001111,B00000000,B00000001, - B00110000,B00100000,B00000000,B00110111,B00000000,B00000000,B00000000,B00010010,B00100100,B00001000,B00010000,B00001001,B00000000,B00000001, - B00100000,B00110000,B00000000,B01101101,B10000000,B00000000,B00000000,B00010010,B00100100,B00001001,B10001000,B00001001,B00000000,B00000001, - B00010000,B00011000,B00011111,B01100000,B11000000,B00000000,B00000000,B00010010,B00100100,B00001001,B01001000,B00001001,B00000000,B00000001, - B00110000,B00001100,B00111001,B11100000,B01100000,B00000000,B00000000,B00010010,B00100100,B00001001,B10010000,B00001001,B00000000,B00000001, - B00110000,B00000111,B10010000,B01110000,B01100000,B00000000,B00000000,B00010010,B00100100,B00001000,B01100000,B00001001,B00000000,B00000001, - B00010000,B00010110,B11110000,B00011000,B00100000,B00000000,B00000000,B00010010,B00100100,B00001000,B00010000,B00001001,B00000000,B00000001, - B00011010,B00010000,B01100000,B00001000,B00110000,B00000000,B00000000,B00010010,B00100100,B00001001,B11001000,B00001001,B00000000,B00000001, - B00001011,B00001001,B10000000,B00000000,B00110000,B00000000,B00000000,B00010010,B00100100,B00001001,B00100100,B00001001,B00000000,B00000001, - B00001110,B00000111,B10000000,B00000000,B00010000,B00000000,B00000000,B00010011,B11100100,B10001001,B11000100,B10001001,B11111001,B00000001, - B00000110,B00011110,B01000000,B00010000,B00010000,B00000000,B00000000,B00010000,B00000101,B11001000,B00001001,B11001000,B00001011,B10000001, - B00000110,B00000000,B01000000,B00100000,B00010000,B00000000,B00000000,B00001111,B11111000,B10001111,B11110000,B10001111,B11111001,B00000001, - B00000011,B10000000,B00000000,B00100000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001, - B00000001,B11111111,B11111111,B11111111,B11100000,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111 -}; diff --git a/config/examples/makibox/Configuration.h b/config/examples/makibox/Configuration.h deleted file mode 100644 index 44d4b7dcb8..0000000000 --- a/config/examples/makibox/Configuration.h +++ /dev/null @@ -1,2229 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_5DPRINT -#endif - -// Name displayed in the LCD "Ready" message and Info menu -#define CUSTOM_MACHINE_NAME "MakiBox" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 1 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 12 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - // Ultimaker - #define DEFAULT_Kp 22.2 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 175 // limits duty cycle to bed; 255=full current -// This limit is set to 175 by default in the Makibox configuration and it can be adjusted -// to increase the heatup rate. However, if changed, be aware of the safety concerns of -// drawing too much current from the power supply. - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 400, 400, 400, 163 } // default steps per unit for ***** MakiBox A6 ***** - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 60, 60, 20, 45 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 2000, 2000, 30, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR false -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR true -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 110 -#define Y_BED_SIZE 150 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 86 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY 1500 -#define HOMING_FEEDRATE_Z (2*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 100 -#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/makibox/Configuration_adv.h b/config/examples/makibox/Configuration_adv.h deleted file mode 100644 index 18c89f83ca..0000000000 --- a/config/examples/makibox/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 60 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 4 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.7, 1.7, 1.7, 1.7 } // 5DPRINT - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - //#define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -//#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - //#define USER_DESC_5 "Home & Info" - //#define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/tvrrug/Round2/Configuration.h b/config/examples/tvrrug/Round2/Configuration.h deleted file mode 100644 index 410be4223b..0000000000 --- a/config/examples/tvrrug/Round2/Configuration.h +++ /dev/null @@ -1,2221 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_OMCA -#endif - -// Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "3D Printer" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 5 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 5 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - // J-Head Mk V-B - #define DEFAULT_Kp 25.05 - #define DEFAULT_Ki 2.30 - #define DEFAULT_Kd 68.15 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -//#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 71.1, 71.1, 2560, 600 } // David TVRR - -//#define DEFAULT_AXIS_STEPS_PER_UNIT { 79.87, 79.87, 2566, 563.78 } // Al's TVRR -//#define DEFAULT_AXIS_STEPS_PER_UNIT { 81.26, 80.01, 2561, 599.14 } // Michel TVRR old -//#define DEFAULT_AXIS_STEPS_PER_UNIT { 71.1, 71.1, 2560, 739.65 } // Michel TVRR - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 45 } // David TVRR - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 9000, 9000, 100, 10000 } - -/* MICHEL: This has an impact on the "ripples" in print walls */ - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 10.0 - #define DEFAULT_YJERK 10.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { -25, -29, -12.35 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 1 -#define Y_ENABLE_ON 1 -#define Z_ENABLE_ON 1 -#define E_ENABLE_ON 1 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR false -#define INVERT_Z_DIR true - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR -1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 205 -#define Y_BED_SIZE 205 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 120 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -//#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 100 -#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -//#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -//#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/tvrrug/Round2/Configuration_adv.h b/config/examples/tvrrug/Round2/Configuration_adv.h deleted file mode 100644 index 139283f472..0000000000 --- a/config/examples/tvrrug/Round2/Configuration_adv.h +++ /dev/null @@ -1,2931 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - #define CONTROLLER_FAN_PIN 23 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 1 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 60 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) -//#define DIGIPOT_I2C -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT - #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT -#endif - -//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - //#define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G27" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -//#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - //#define USER_DESC_5 "Home & Info" - //#define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE diff --git a/config/examples/wt150/Configuration.h b/config/examples/wt150/Configuration.h deleted file mode 100644 index 09cfa27b34..0000000000 --- a/config/examples/wt150/Configuration.h +++ /dev/null @@ -1,2231 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration.h - * - * Basic settings such as: - * - * - Type of electronics - * - Type of temperature sensor - * - Printer geometry - * - Endstop configuration - * - LCD controller - * - Extra features - * - * Advanced settings can be found in Configuration_adv.h - * - */ -#define CONFIGURATION_H_VERSION 020000 - -//=========================================================================== -//============================= Getting Started ============================= -//=========================================================================== - -/** - * Here are some standard links for getting your machine calibrated: - * - * http://reprap.org/wiki/Calibration - * http://youtu.be/wAL9d7FgInk - * http://calculator.josefprusa.cz - * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide - * http://www.thingiverse.com/thing:5573 - * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap - * http://www.thingiverse.com/thing:298812 - */ - -//=========================================================================== -//============================= DELTA Printer =============================== -//=========================================================================== -// For a Delta printer start with one of the configuration files in the -// config/examples/delta directory and customize for your machine. -// - -//=========================================================================== -//============================= SCARA Printer =============================== -//=========================================================================== -// For a SCARA printer start with the configuration files in -// config/examples/SCARA and customize for your machine. -// - -// @section info - -// Author info of this build printed to the host during boot and M115 -#define STRING_CONFIG_H_AUTHOR "(none, wt150)" // Who made the changes. -//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes) - -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respectfully request that you retain the unmodified Marlin boot screen. - */ - -// Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION ** -#define SHOW_BOOTSCREEN - -// Show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN - -// Show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE - -// @section machine - -/** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -#define SERIAL_PORT 0 - -/** - * Select a secondary serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port -1 is the USB emulated serial port, if available. - * - * :[-1, 0, 1, 2, 3, 4, 5, 6, 7] - */ -//#define SERIAL_PORT_2 -1 - -/** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 115200 - -// Enable the Bluetooth serial interface on AT90USB devices -//#define BLUETOOTH - -// Choose the name from boards.h that matches your setup -#ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_MIGHTYBOARD_REVE -#endif - -// Name displayed in the LCD "Ready" message and Info menu -//#define CUSTOM_MACHINE_NAME "Weistek WT150" - -// Printer's unique ID, used by some programs to differentiate between machines. -// Choose your own or use a service like http://www.uuidgenerator.net/version4 -//#define MACHINE_UUID "5f0bb7a3-0e14-428c-812b-15ab0d3ecc71" - -// @section extruder - -// This defines the number of extruders -// :[1, 2, 3, 4, 5, 6] -#define EXTRUDERS 1 - -// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 - -// For Cyclops or any "multi-extruder" that shares a single nozzle. -//#define SINGLENOZZLE - -/** - * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. - * - * This device allows one stepper driver on a control board to drive - * two to eight stepper motors, one at a time, in a manner suitable - * for extruders. - * - * This option only allows the multiplexer to switch on tool-change. - * Additional options to configure custom E moves are pending. - */ -//#define MK2_MULTIPLEXER -#if ENABLED(MK2_MULTIPLEXER) - // Override the default DIO selector pins here, if needed. - // Some pins files may provide defaults for these pins. - //#define E_MUX0_PIN 40 // Always Required - //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs - //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs -#endif - -/** - * Prusa Multi-Material Unit v2 - * - * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails. - * Requires EXTRUDERS = 5 - * - * For additional configuration see Configuration_adv.h - */ -//#define PRUSA_MMU2 - -// A dual extruder that uses a single stepper motor -//#define SWITCHING_EXTRUDER -#if ENABLED(SWITCHING_EXTRUDER) - #define SWITCHING_EXTRUDER_SERVO_NR 0 - #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] - #if EXTRUDERS > 3 - #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 - #endif -#endif - -// A dual-nozzle that uses a servomotor to raise/lower one (or both) of the nozzles -//#define SWITCHING_NOZZLE -#if ENABLED(SWITCHING_NOZZLE) - #define SWITCHING_NOZZLE_SERVO_NR 0 - //#define SWITCHING_NOZZLE_E1_SERVO_NR 1 // If two servos are used, the index of the second - #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 (single servo) or lowered/raised (dual servo) -#endif - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a solenoid docking mechanism. Requires SOL1_PIN and SOL2_PIN. - */ -//#define PARKING_EXTRUDER - -/** - * Two separate X-carriages with extruders that connect to a moving part - * via a magnetic docking mechanism using movements and no solenoid - * - * project : https://www.thingiverse.com/thing:3080893 - * movements : https://youtu.be/0xCEiG9VS3k - * https://youtu.be/Bqbcs0CU2FE - */ -//#define MAGNETIC_PARKING_EXTRUDER - -#if EITHER(PARKING_EXTRUDER, MAGNETIC_PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders - #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #if ENABLED(PARKING_EXTRUDER) - - #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage - #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil - #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // (ms) Delay for magnetic field. No delay if 0 or not defined. - //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381 - - #elif ENABLED(MAGNETIC_PARKING_EXTRUDER) - - #define MPE_FAST_SPEED 9000 // (mm/m) Speed for travel before last distance point - #define MPE_SLOW_SPEED 4500 // (mm/m) Speed for last distance travel to park and couple - #define MPE_TRAVEL_DISTANCE 10 // (mm) Last distance point - #define MPE_COMPENSATION 0 // Offset Compensation -1 , 0 , 1 (multiplier) only for coupling - - #endif - -#endif - -/** - * Switching Toolhead - * - * Support for swappable and dockable toolheads, such as - * the E3D Tool Changer. Toolheads are locked with a servo. - */ -//#define SWITCHING_TOOLHEAD - -/** - * Magnetic Switching Toolhead - * - * Support swappable and dockable toolheads with a magnetic - * docking mechanism using movement and no servo. - */ -//#define MAGNETIC_SWITCHING_TOOLHEAD - -/** - * Electromagnetic Switching Toolhead - * - * Parking for CoreXY / HBot kinematics. - * Toolheads are parked at one edge and held with an electromagnet. - * Supports more than 2 Toolheads. See https://youtu.be/JolbsAKTKf4 - */ -//#define ELECTROMAGNETIC_SWITCHING_TOOLHEAD - -#if ANY(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD, ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock - #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis - #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders - #if ENABLED(SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector - #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock - #elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis - #define SWITCHING_TOOLHEAD_X_SECURITY { 90, 150 } // (mm) Security distance X axis (T0,T1) - //#define PRIME_BEFORE_REMOVE // Prime the nozzle before release from the dock - #if ENABLED(PRIME_BEFORE_REMOVE) - #define SWITCHING_TOOLHEAD_PRIME_MM 20 // (mm) Extruder prime length - #define SWITCHING_TOOLHEAD_RETRACT_MM 10 // (mm) Retract after priming length - #define SWITCHING_TOOLHEAD_PRIME_FEEDRATE 300 // (mm/m) Extruder prime feedrate - #define SWITCHING_TOOLHEAD_RETRACT_FEEDRATE 2400 // (mm/m) Extruder retract feedrate - #endif - #elif ENABLED(ELECTROMAGNETIC_SWITCHING_TOOLHEAD) - #define SWITCHING_TOOLHEAD_Z_HOP 2 // (mm) Z raise for switching - #endif -#endif - -/** - * "Mixing Extruder" - * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. - * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. - * - This implementation supports up to two mixing extruders. - * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). - */ -//#define MIXING_EXTRUDER -#if ENABLED(MIXING_EXTRUDER) - #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder - #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 - //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands - //#define GRADIENT_MIX // Support for gradient mixing with M166 and LCD - #if ENABLED(GRADIENT_MIX) - //#define GRADIENT_VTOOL // Add M166 T to use a V-tool index as a Gradient alias - #endif -#endif - -// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). -// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). -// For the other hotends it is their distance from the extruder 0 hotend. -//#define HOTEND_OFFSET_X { 0.0, 20.00 } // (mm) relative X-offset for each nozzle -//#define HOTEND_OFFSET_Y { 0.0, 5.00 } // (mm) relative Y-offset for each nozzle -//#define HOTEND_OFFSET_Z { 0.0, 0.00 } // (mm) relative Z-offset for each nozzle - -// @section machine - -/** - * Power Supply Control - * - * Enable and connect the power supply to the PS_ON_PIN. - * Specify whether the power supply is active HIGH or active LOW. - */ -//#define PSU_CONTROL -//#define PSU_NAME "Power Supply" - -#if ENABLED(PSU_CONTROL) - #define PSU_ACTIVE_HIGH false // Set 'false' for ATX, 'true' for X-Box - - //#define PSU_DEFAULT_OFF // Keep power off until enabled directly with M80 - //#define PSU_POWERUP_DELAY 100 // (ms) Delay for the PSU to warm up to full power - - //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin - #if ENABLED(AUTO_POWER_CONTROL) - #define AUTO_POWER_FANS // Turn on PSU if fans need power - #define AUTO_POWER_E_FANS - #define AUTO_POWER_CONTROLLERFAN - #define AUTO_POWER_CHAMBER_FAN - //#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU over this temperature - //#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU over this temperature - #define POWER_TIMEOUT 30 - #endif -#endif - -// @section temperature - -//=========================================================================== -//============================= Thermal Settings ============================ -//=========================================================================== - -/** - * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table - * - * Temperature sensors available: - * - * -5 : PT100 / PT1000 with MAX31865 (only for sensors 0-1) - * -3 : thermocouple with MAX31855 (only for sensors 0-1) - * -2 : thermocouple with MAX6675 (only for sensors 0-1) - * -4 : thermocouple with AD8495 - * -1 : thermocouple with AD595 - * 0 : not used - * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) - * 331 : (3.3V scaled thermistor 1 table) - * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) - * 3 : Mendel-parts thermistor (4.7k pullup) - * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! - * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) - * 501 : 100K Zonestar (Tronxy X3A) Thermistor - * 512 : 100k RPW-Ultra hotend thermistor (4.7k pullup) - * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) - * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) - * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) - * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) - * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) - * 10 : 100k RS thermistor 198-961 (4.7k pullup) - * 11 : 100k beta 3950 1% thermistor (4.7k pullup) - * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) - * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" - * 15 : 100k thermistor calibration for JGAurora A5 hotend - * 18 : ATC Semitec 204GT-2 (4.7k pullup) Dagoma.Fr - MKS_Base_DKU001327 - * 20 : Pt100 with circuit in the Ultimainboard V2.x - * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x - * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 - * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup - * 66 : 4.7M High Temperature thermistor from Dyze Design - * 67 : 450C thermistor from SliceEngineering - * 70 : the 100K thermistor found in the bq Hephestos 2 - * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor - * 99 : 100k thermistor with a 10K pull-up resistor (found on some Wanhao i3 machines) - * - * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. - * (but gives greater accuracy and more stable PID) - * 51 : 100k thermistor - EPCOS (1k pullup) - * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) - * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) - * - * 1047 : Pt1000 with 4k7 pullup - * 1010 : Pt1000 with 1k pullup (non standard) - * 147 : Pt100 with 4k7 pullup - * 110 : Pt100 with 1k pullup (non standard) - * - * 1000 : Custom - Specify parameters in Configuration_adv.h - * - * Use these for Testing or Development purposes. NEVER for production machine. - * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. - * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. - */ -#define TEMP_SENSOR_0 -2 -#define TEMP_SENSOR_1 0 -#define TEMP_SENSOR_2 0 -#define TEMP_SENSOR_3 0 -#define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_5 0 -#define TEMP_SENSOR_BED 0 -#define TEMP_SENSOR_CHAMBER 0 - -// Dummy thermistor constant temperature readings, for use with 998 and 999 -#define DUMMY_THERMISTOR_998_VALUE 25 -#define DUMMY_THERMISTOR_999_VALUE 100 - -// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings -// from the two sensors differ too much the print will be aborted. -//#define TEMP_SENSOR_1_AS_REDUNDANT -#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 - -#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109 -#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190 -#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer -#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target - -// Below this temperature the heater will be switched off -// because it probably indicates a broken thermistor wire. -#define HEATER_0_MINTEMP 5 -#define HEATER_1_MINTEMP 5 -#define HEATER_2_MINTEMP 5 -#define HEATER_3_MINTEMP 5 -#define HEATER_4_MINTEMP 5 -#define HEATER_5_MINTEMP 5 -#define BED_MINTEMP 5 - -// Above this temperature the heater will be switched off. -// This can protect components from overheating, but NOT from shorts and failures. -// (Use MINTEMP for thermistor short/failure protection.) -#define HEATER_0_MAXTEMP 275 -#define HEATER_1_MAXTEMP 275 -#define HEATER_2_MAXTEMP 275 -#define HEATER_3_MAXTEMP 275 -#define HEATER_4_MAXTEMP 275 -#define HEATER_5_MAXTEMP 275 -#define BED_MAXTEMP 150 - -//=========================================================================== -//============================= PID Settings ================================ -//=========================================================================== -// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning - -// Comment the following line to disable PID and enable bang-bang. -#define PIDTEMP -#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current -#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within any PID loop -#if ENABLED(PIDTEMP) - //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM) - //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM) - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it - - //WT150, based on: M303 E0 S220 C8 - #define DEFAULT_Kp 22.10 - #define DEFAULT_Ki 1.10 - #define DEFAULT_Kd 110.78 - - // Ultimaker - //#define DEFAULT_Kp 22.2 - //#define DEFAULT_Ki 1.08 - //#define DEFAULT_Kd 114 - - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 - - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 - -#endif // PIDTEMP - -//=========================================================================== -//====================== PID > Bed Temperature Control ====================== -//=========================================================================== - -/** - * PID Bed Heating - * - * If this option is enabled set PID constants below. - * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. - * - * The PID frequency will be the same as the extruder PWM. - * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, - * which is fine for driving a square wave into a resistive load and does not significantly - * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W - * heater. If your configuration is significantly different than this and you don't understand - * the issues involved, don't use bed PID until someone else verifies that your hardware works. - */ -//#define PIDTEMPBED - -//#define BED_LIMIT_SWITCHING - -/** - * Max Bed Power - * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). - * When set to any value below 255, enables a form of PWM to the bed that acts like a divider - * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) - */ -#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current - -#if ENABLED(PIDTEMPBED) - //#define MIN_BED_POWER 0 - //#define PID_BED_DEBUG // Sends debug data to the serial port. - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 - - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. -#endif // PIDTEMPBED - -// @section extruder - -/** - * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. - * Add M302 to set the minimum extrusion temperature and/or turn - * cold extrusion prevention on and off. - * - * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** - */ -#define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 - -/** - * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. - * Note: For Bowden Extruders make this large enough to allow load/unload. - */ -#define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 - -//=========================================================================== -//======================== Thermal Runaway Protection ======================= -//=========================================================================== - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * If you get "Thermal Runaway" or "Heating failed" errors the - * details can be tuned in Configuration_adv.h - */ - -#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders -#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed -#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber - -//=========================================================================== -//============================= Mechanical Settings ========================= -//=========================================================================== - -// @section machine - -// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics -// either in the usual order or reversed -//#define COREXY -//#define COREXZ -//#define COREYZ -//#define COREYX -//#define COREZX -//#define COREZY - -//=========================================================================== -//============================== Endstop Settings =========================== -//=========================================================================== - -// @section homing - -// Specify here all the endstop connectors that are connected to any endstop or probe. -// Almost all printers will be using one per axis. Probes will use one or more of the -// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. -#define USE_XMIN_PLUG -#define USE_YMIN_PLUG -//#define USE_ZMIN_PLUG -//#define USE_XMAX_PLUG -//#define USE_YMAX_PLUG -#define USE_ZMAX_PLUG - -// Enable pullup for all endstops to prevent a floating state -//#define ENDSTOPPULLUPS -#if DISABLED(ENDSTOPPULLUPS) - // Disable ENDSTOPPULLUPS to set pullups individually - //#define ENDSTOPPULLUP_XMAX - //#define ENDSTOPPULLUP_YMAX - //#define ENDSTOPPULLUP_ZMAX - //#define ENDSTOPPULLUP_XMIN - //#define ENDSTOPPULLUP_YMIN - //#define ENDSTOPPULLUP_ZMIN - //#define ENDSTOPPULLUP_ZMIN_PROBE -#endif - -// Enable pulldown for all endstops to prevent a floating state -//#define ENDSTOPPULLDOWNS -#if DISABLED(ENDSTOPPULLDOWNS) - // Disable ENDSTOPPULLDOWNS to set pulldowns individually - //#define ENDSTOPPULLDOWN_XMAX - //#define ENDSTOPPULLDOWN_YMAX - //#define ENDSTOPPULLDOWN_ZMAX - //#define ENDSTOPPULLDOWN_XMIN - //#define ENDSTOPPULLDOWN_YMIN - //#define ENDSTOPPULLDOWN_ZMIN - //#define ENDSTOPPULLDOWN_ZMIN_PROBE -#endif - -// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe. - -/** - * Stepper Drivers - * - * These settings allow Marlin to tune stepper driver timing and enable advanced options for - * stepper drivers that support them. You may also override timing options in Configuration_adv.h. - * - * A4988 is assumed for unspecified drivers. - * - * Options: A4988, A5984, DRV8825, LV8729, L6470, L6474, POWERSTEP01, - * TB6560, TB6600, TMC2100, - * TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE, - * TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE, - * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, - * TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE - * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE'] - */ -//#define X_DRIVER_TYPE A4988 -//#define Y_DRIVER_TYPE A4988 -//#define Z_DRIVER_TYPE A4988 -//#define X2_DRIVER_TYPE A4988 -//#define Y2_DRIVER_TYPE A4988 -//#define Z2_DRIVER_TYPE A4988 -//#define Z3_DRIVER_TYPE A4988 -//#define E0_DRIVER_TYPE A4988 -//#define E1_DRIVER_TYPE A4988 -//#define E2_DRIVER_TYPE A4988 -//#define E3_DRIVER_TYPE A4988 -//#define E4_DRIVER_TYPE A4988 -//#define E5_DRIVER_TYPE A4988 - -// Enable this feature if all enabled endstop pins are interrupt-capable. -// This will remove the need to poll the interrupt pins, saving many CPU cycles. -//#define ENDSTOP_INTERRUPTS_FEATURE - -/** - * Endstop Noise Threshold - * - * Enable if your probe or endstops falsely trigger due to noise. - * - * - Higher values may affect repeatability or accuracy of some bed probes. - * - To fix noise install a 100nF ceramic capacitor inline with the switch. - * - This feature is not required for common micro-switches mounted on PCBs - * based on the Makerbot design, which already have the 100nF capacitor. - * - * :[2,3,4,5,6,7] - */ -//#define ENDSTOP_NOISE_THRESHOLD 2 - -//============================================================================= -//============================== Movement Settings ============================ -//============================================================================= -// @section motion - -/** - * Default Settings - * - * These settings can be reset by M502 - * - * Note that if EEPROM is enabled, saved values will override these. - */ - -/** - * With this option each E stepper can have its own factors for the - * following movement settings. If fewer factors are given than the - * total number of extruders, the last value applies to the rest. - */ -//#define DISTINCT_E_FACTORS - -/** - * Default Axis Steps Per Unit (steps/mm) - * Override with M92 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 71.699959, 71.699959, 71.699959, 100.470955 } - -/** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_FEEDRATE { 83.333333, 83.333333, 19.5, 26.666666 } - -//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 -#if ENABLED(LIMITED_MAX_FR_EDITING) - #define MAX_FEEDRATE_EDIT_VALUES { 600, 600, 10, 50 } // ...or, set your own edit limits -#endif - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2...]] - */ -#define DEFAULT_MAX_ACCELERATION { 1200, 1200, 100, 10000 } - -//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 -#if ENABLED(LIMITED_MAX_ACCEL_EDITING) - #define MAX_ACCEL_EDIT_VALUES { 6000, 6000, 200, 20000 } // ...or, set your own edit limits -#endif - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 1200 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 1200 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 1200 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk limits (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -//#define CLASSIC_JERK -#if ENABLED(CLASSIC_JERK) - #define DEFAULT_XJERK 8.0 - #define DEFAULT_YJERK 8.0 - #define DEFAULT_ZJERK 0.3 - - //#define LIMITED_JERK_EDITING // Limit edit via M205 or LCD to DEFAULT_aJERK * 2 - #if ENABLED(LIMITED_JERK_EDITING) - #define MAX_JERK_EDIT_VALUES { 20, 20, 0.6, 10 } // ...or, set your own edit limits - #endif -#endif - -#define DEFAULT_EJERK 5.0 // May be used by Linear Advance - -/** - * Junction Deviation Factor - * - * See: - * https://reprap.org/forum/read.php?1,739819 - * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html - */ -#if DISABLED(CLASSIC_JERK) - #define JUNCTION_DEVIATION_MM 0.021 // (mm) Distance from real junction edge -#endif - -/** - * S-Curve Acceleration - * - * This option eliminates vibration during printing by fitting a Bézier - * curve to move acceleration, producing much smoother direction changes. - * - * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained - */ -//#define S_CURVE_ACCELERATION - -//=========================================================================== -//============================= Z Probe Options ============================= -//=========================================================================== -// @section probes - -// -// See http://marlinfw.org/docs/configuration/probes.html -// - -/** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ -#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - -/** - * Z_MIN_PROBE_PIN - * - * Define this pin if the probe is not connected to Z_MIN_PIN. - * If not defined the default pin for the selected MOTHERBOARD - * will be used. Most of the time the default is what you want. - * - * - The simplest option is to use a free endstop connector. - * - Use 5V for powered (usually inductive) sensors. - * - * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: - * - For simple switches connect... - * - normally-closed switches to GND and D32. - * - normally-open switches to 5V and D32. - * - */ -//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default - -/** - * Probe Type - * - * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. - * Activate one of these to use Auto Bed Leveling below. - */ - -/** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY -//#define MANUAL_PROBE_START_Z 0.2 - -/** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - -/** - * Use the nozzle as the probe, as with a conductive - * nozzle system or a piezo-electric smart effector. - */ -//#define NOZZLE_AS_PROBE - -/** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. -//#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles - -/** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH - -/** - * Touch-MI Probe by hotends.fr - * - * This probe is deployed and activated by moving the X-axis to a magnet at the edge of the bed. - * By default, the magnet is assumed to be on the left and activated by a home. If the magnet is - * on the right, enable and set TOUCH_MI_DEPLOY_XPOS to the deploy position. - * - * Also requires: BABYSTEPPING, BABYSTEP_ZPROBE_OFFSET, Z_SAFE_HOMING, - * and a minimum Z_HOMING_HEIGHT of 10. - */ -//#define TOUCH_MI_PROBE -#if ENABLED(TOUCH_MI_PROBE) - #define TOUCH_MI_RETRACT_Z 0.5 // Height at which the probe retracts - //#define TOUCH_MI_DEPLOY_XPOS (X_MAX_BED + 2) // For a magnet on the right side of the bed - //#define TOUCH_MI_MANUAL_DEPLOY // For manual deploy (LCD menu) -#endif - -// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - -// A sled-mounted probe like those designed by Charles Bell. -//#define Z_PROBE_SLED -//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. - -// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice. -//#define RACK_AND_PINION_PROBE -#if ENABLED(RACK_AND_PINION_PROBE) - #define Z_PROBE_DEPLOY_X X_MIN_POS - #define Z_PROBE_RETRACT_X X_MAX_POS -#endif - -// -// For Z_PROBE_ALLEN_KEY see the Delta example configurations. -// - -/** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * - * In the following example the X and Y offsets are both positive: - * - * #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - * - * Specify a Probe position as { X, Y, Z } - */ -#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 } - -// Most probes should stay away from the edges of the bed, but -// with NOZZLE_AS_PROBE this can be negative for a wider probing area. -#define MIN_PROBE_EDGE 10 - -// X and Y axis travel speed (mm/m) between probes -#define XY_PROBE_SPEED 8000 - -// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) -#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z - -// Feedrate (mm/m) for the "accurate" probe of each point -#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) - -/** - * Multiple Probing - * - * You may get improved results by probing 2 or more times. - * With EXTRA_PROBING the more atypical reading(s) will be disregarded. - * - * A total of 2 does fast/slow probes with a weighted average. - * A total of 3 or more adds more slow probes, taking the average. - */ -//#define MULTIPLE_PROBING 2 -//#define EXTRA_PROBING 1 - -/** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ -#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow -#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes -//#define Z_AFTER_PROBING 5 // Z position after probing is done - -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping - -// For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -20 -#define Z_PROBE_OFFSET_RANGE_MAX 20 - -// Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - -// Before deploy/stow pause for user confirmation -//#define PAUSE_BEFORE_DEPLOY_STOW -#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) - //#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe -#endif - -/** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing -#if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) -#endif -//#define PROBING_FANS_OFF // Turn fans off when probing -//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing -//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors - -// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 -// :{ 0:'Low', 1:'High' } -#define X_ENABLE_ON 0 -#define Y_ENABLE_ON 0 -#define Z_ENABLE_ON 0 -#define E_ENABLE_ON 0 // For all extruders - -// Disables axis stepper immediately when it's not being used. -// WARNING: When motors turn off there is a chance of losing position accuracy! -#define DISABLE_X false -#define DISABLE_Y false -#define DISABLE_Z false - -// Warn on display about possibly reduced accuracy -//#define DISABLE_REDUCED_ACCURACY_WARNING - -// @section extruder - -#define DISABLE_E false // For all extruders -#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled - -// @section machine - -// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR true -#define INVERT_Y_DIR false -#define INVERT_Z_DIR false - -// @section extruder - -// For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false -#define INVERT_E1_DIR false -#define INVERT_E2_DIR false -#define INVERT_E3_DIR false -#define INVERT_E4_DIR false -#define INVERT_E5_DIR false - -// @section homing - -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - -//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. - -//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. - -// Direction of endstops when homing; 1=MAX, -1=MIN -// :[-1,1] -#define X_HOME_DIR -1 -#define Y_HOME_DIR -1 -#define Z_HOME_DIR 1 - -// @section machine - -// The size of the print bed -#define X_BED_SIZE 150 -#define Y_BED_SIZE 150 - -// Travel limits (mm) after homing, corresponding to endstop positions. -#define X_MIN_POS 0 -#define Y_MIN_POS 0 -#define Z_MIN_POS 0 -#define X_MAX_POS X_BED_SIZE -#define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 143.0 - -/** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ - -// Min software endstops constrain movement within minimum coordinate bounds -#define MIN_SOFTWARE_ENDSTOPS -#if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z -#endif - -// Max software endstops constrain movement within maximum coordinate bounds -#define MAX_SOFTWARE_ENDSTOPS -#if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z -#endif - -#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD -#endif - -/** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR -#if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. - - // Set one or more commands to execute on filament runout. - // (After 'M412 H' Marlin will ask the host to handle the process.) - #define FILAMENT_RUNOUT_SCRIPT "M600" - - // After a runout is detected, continue printing this length of filament - // before executing the runout script. Useful for a sensor at the end of - // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 - - #ifdef FILAMENT_RUNOUT_DISTANCE_MM - // Enable this option to use an encoder disc that toggles the runout pin - // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM - // large enough to avoid false positives.) - //#define FILAMENT_MOTION_SENSOR - #endif -#endif - -//=========================================================================== -//=============================== Bed Leveling ============================== -//=========================================================================== -// @section calibrate - -/** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ -//#define AUTO_BED_LEVELING_3POINT -//#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING - -/** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ -//#define DEBUG_LEVELING_FEATURE - -#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT - - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool. - #endif - -#endif - -#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR) - - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST - - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) - - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID - - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif - - #endif - -#elif ENABLED(AUTO_BED_LEVELING_UBL) - - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== - - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh - - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 - - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. - -#elif ENABLED(MESH_BED_LEVELING) - - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== - - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS - -#endif // BED_LEVELING - -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING - -#if ENABLED(LCD_BED_LEVELING) - #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment - //#define MESH_EDIT_MENU // Add a menu to edit mesh points -#endif - -// Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS - -#if ENABLED(LEVEL_BED_CORNERS) - #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling - #define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners - #define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points - //#define LEVEL_CENTER_TOO // Move to the center after the last corner -#endif - -/** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" - - -// @section homing - -// The center of the bed is at (X=0, Y=0) -//#define BED_CENTER_AT_0_0 - -// Manually set the home position. Leave these undefined for automatic settings. -// For DELTA this is the top-center of the Cartesian print volume. -//#define MANUAL_X_HOME_POS 0 -//#define MANUAL_Y_HOME_POS 0 -//#define MANUAL_Z_HOME_POS 0 - -// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. -// -// With this feature enabled: -// -// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. -// - If stepper drivers time out, it will need X and Y homing again before Z homing. -// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). -// - Prevent Z homing when the Z probe is outside bed area. -// -//#define Z_SAFE_HOMING - -#if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). -#endif - -// Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (50*60) -#define HOMING_FEEDRATE_Z (4*60) - -// Validate that endstops are triggered on homing moves -#define VALIDATE_HOMING_ENDSTOPS - -// @section calibrate - -/** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ -//#define SKEW_CORRECTION - -#if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 - - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 - - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif - - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE -#endif - -//============================================================================= -//============================= Additional Features =========================== -//============================================================================= - -// @section extras - -/** - * EEPROM - * - * Persistent storage to preserve configurable settings across reboots. - * - * M500 - Store settings to EEPROM. - * M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes) - * M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.) - */ -#define EEPROM_SETTINGS // Persistent storage with M500 and M501 -//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! -#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. -#if ENABLED(EEPROM_SETTINGS) - //#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors. -#endif - -// -// Host Keepalive -// -// When enabled Marlin will send a busy status message to the host -// every couple of seconds when it can't accept commands. -// -#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. -#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating - -// -// M100 Free Memory Watcher -// -//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage - -// -// G20/G21 Inch mode support -// -//#define INCH_MODE_SUPPORT - -// -// M149 Set temperature units support -// -//#define TEMPERATURE_UNITS_SUPPORT - -// @section temperature - -// Preheat Constants -#define PREHEAT_1_LABEL "PLA" -#define PREHEAT_1_TEMP_HOTEND 180 -#define PREHEAT_1_TEMP_BED 70 -#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 - -#define PREHEAT_2_LABEL "ABS" -#define PREHEAT_2_TEMP_HOTEND 240 -#define PREHEAT_2_TEMP_BED 110 -#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 - -/** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE - -#if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z_raise } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers) -#endif - -/** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ -//#define NOZZLE_CLEAN_FEATURE - -#if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 - - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 - - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1) } - #define NOZZLE_CLEAN_END_POINT { 100, 60, (Z_MIN_POS + 1) } - - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - - // Move the nozzle to the initial position after cleaning - #define NOZZLE_CLEAN_GOBACK - - // Enable for a purge/clean station that's always at the gantry height (thus no Z move) - //#define NOZZLE_CLEAN_NO_Z -#endif - -/** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ -#define PRINTJOB_TIMER_AUTOSTART - -/** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ -#define PRINTCOUNTER - -//============================================================================= -//============================= LCD and SD support ============================ -//============================================================================= - -// @section lcd - -/** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cz, da, de, el, el_gr, es, eu, fi, fr, gl, hr, it, jp_kana, - * ko_KR, nl, pl, pt, pt_br, ru, sk, tr, uk, vi, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el_gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp_kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt_br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'vi':'Vietnamese', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' } - */ -#define LCD_LANGUAGE en - -/** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ -#define DISPLAY_CHARSET_HD44780 JAPANESE - -/** - * Info Screen Style (0:Classic, 1:Prusa) - * - * :[0:'Classic', 1:'Prusa'] - */ -#define LCD_INFO_SCREEN_STYLE 0 - -/** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -#define SDSUPPORT - -/** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ -//#define SPI_SPEED SPI_HALF_SPEED -//#define SPI_SPEED SPI_QUARTER_SPEED -//#define SPI_SPEED SPI_EIGHTH_SPEED - -/** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ -//#define SD_CHECK_AND_RETRY - -/** - * LCD Menu Items - * - * Disable all menus and only display the Status Screen, or - * just remove some extraneous menu items to recover space. - */ -//#define NO_LCD_MENUS -//#define SLIM_LCD_MENUS - -// -// ENCODER SETTINGS -// -// This option overrides the default number of encoder pulses needed to -// produce one step. Should be increased for high-resolution encoders. -// -//#define ENCODER_PULSES_PER_STEP 4 - -// -// Use this option to override the number of step signals required to -// move between next/prev menu items. -// -//#define ENCODER_STEPS_PER_MENU_ITEM 1 - -/** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ - -// -// This option reverses the encoder direction everywhere. -// -// Set this option if CLOCKWISE causes values to DECREASE -// -//#define REVERSE_ENCODER_DIRECTION - -// -// This option reverses the encoder direction for navigating LCD menus. -// -// If CLOCKWISE normally moves DOWN this makes it go UP. -// If CLOCKWISE normally moves UP this makes it go DOWN. -// -//#define REVERSE_MENU_DIRECTION - -// -// This option reverses the encoder direction for Select Screen. -// -// If CLOCKWISE normally moves LEFT this makes it go RIGHT. -// If CLOCKWISE normally moves RIGHT this makes it go LEFT. -// -//#define REVERSE_SELECT_DIRECTION - -// -// Individual Axis Homing -// -// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. -// -//#define INDIVIDUAL_AXIS_HOMING_MENU - -// -// SPEAKER/BUZZER -// -// If you have a speaker that can produce tones, enable it here. -// By default Marlin assumes you have a buzzer with a fixed frequency. -// -//#define SPEAKER - -// -// The duration and frequency for the UI feedback sound. -// Set these to 0 to disable audio feedback in the LCD menus. -// -// Note: Test audio output with the G-Code: -// M300 S P -// -//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 -//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//======================== (Character-based LCDs) ========================= -//============================================================================= - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - -// -// Original RADDS LCD Display+Encoder+SDCardReader -// http://doku.radds.org/dokumentation/lcd-display/ -// -//#define RADDS_DISPLAY - -// -// ULTIMAKER Controller. -// -//#define ULTIMAKERCONTROLLER - -// -// ULTIPANEL as seen on Thingiverse. -// -//#define ULTIPANEL - -// -// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) -// http://reprap.org/wiki/PanelOne -// -//#define PANEL_ONE - -// -// GADGETS3D G3D LCD/SD Controller -// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel -// -// Note: Usually sold with a blue PCB. -// -//#define G3D_PANEL - -// -// RigidBot Panel V1.0 -// http://www.inventapart.com/ -// -//#define RIGIDBOT_PANEL - -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - -// -// ANET and Tronxy 20x4 Controller -// -//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. - -// -// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. -// -//#define ULTRA_LCD - -//============================================================================= -//======================== LCD / Controller Selection ========================= -//===================== (I2C and Shift-Register LCDs) ===================== -//============================================================================= - -// -// CONTROLLER TYPE: I2C -// -// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C -// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C -// - -// -// Elefu RA Board Control Panel -// http://www.elefu.com/index.php?route=product/product&product_id=53 -// -//#define RA_CONTROL_PANEL - -// -// Sainsmart (YwRobot) LCD Displays -// -// These require F.Malpartida's LiquidCrystal_I2C library -// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home -// -//#define LCD_SAINSMART_I2C_1602 -//#define LCD_SAINSMART_I2C_2004 - -// -// Generic LCM1602 LCD adapter -// -//#define LCM1602 - -// -// PANELOLU2 LCD with status LEDs, -// separate encoder and click inputs. -// -// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. -// For more info: https://github.com/lincomatic/LiquidTWI2 -// -// Note: The PANELOLU2 encoder click input can either be directly connected to -// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). -// -//#define LCD_I2C_PANELOLU2 - -// -// Panucatt VIKI LCD with status LEDs, -// integrated click & L/R/U/D buttons, separate encoder inputs. -// -//#define LCD_I2C_VIKI - -// -// CONTROLLER TYPE: Shift register panels -// - -// -// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - -// -// 3-wire SR LCD with strobe using 74HC4094 -// https://github.com/mikeshub/SailfishLCD -// Uses the code directly from Sailfish -// -//#define FF_INTERFACEBOARD - -//============================================================================= -//======================= LCD / Controller Selection ======================= -//========================= (Graphical LCDs) ======================== -//============================================================================= - -// -// CONTROLLER TYPE: Graphical 128x64 (DOGM) -// -// IMPORTANT: The U8glib library is required for Graphical Display! -// https://github.com/olikraus/U8glib_Arduino -// - -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. -// -//#define BQ_LCD_SMART_CONTROLLER - -// -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder -// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) -// -//#define ULTI_CONTROLLER - -// -// MKS MINI12864 with graphic controller and SD support -// https://reprap.org/wiki/MKS_MINI_12864 -// -//#define MKS_MINI_12864 - -// -// FYSETC variant of the MINI12864 graphic controller with SD support -// https://wiki.fysetc.com/Mini12864_Panel/ -// -//#define FYSETC_MINI_12864_X_X // Type C/D/E/F. No tunable RGB Backlight by default -//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on) -//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight -//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight - -// -// Factory display for Creality CR-10 -// https://www.aliexpress.com/item/32833148327.html -// -// This is RAMPS-compatible using a single 10-pin connector. -// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) -// -//#define CR10_STOCKDISPLAY - -// -// Ender-2 OEM display, a variant of the MKS_MINI_12864 -// -//#define ENDER2_STOCKDISPLAY - -// -// ANET and Tronxy Graphical Controller -// -// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 -// A clone of the RepRapDiscount full graphics display but with -// different pins/wiring (see pins_ANET_10.h). -// -//#define ANET_FULL_GRAPHICS_LCD - -// -// AZSMZ 12864 LCD with SD -// https://www.aliexpress.com/item/32837222770.html -// -//#define AZSMZ_12864 - -// -// Silvergate GLCD controller -// http://github.com/android444/Silvergate -// -//#define SILVER_GATE_GLCD_CONTROLLER - -//============================================================================= -//============================== OLED Displays ============================== -//============================================================================= - -// -// SSD1306 OLED full graphics generic display -// -//#define U8GLIB_SSD1306 - -// -// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules -// -//#define SAV_3DGLCD -#if ENABLED(SAV_3DGLCD) - #define U8GLIB_SSD1306 - //#define U8GLIB_SH1106 -#endif - -// -// TinyBoy2 128x64 OLED / Encoder Panel -// -//#define OLED_PANEL_TINYBOY2 - -// -// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER -// http://reprap.org/wiki/MKS_12864OLED -// -// Tiny, but very sharp OLED display -// -//#define MKS_12864OLED // Uses the SH1106 controller (default) -//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller - -// -// Einstart S OLED SSD1306 -// -//#define U8GLIB_SH1106_EINSTART - -// -// Overlord OLED display/controller with i2c buzzer and LEDs -// -//#define OVERLORD_OLED - -//============================================================================= -//========================== Extensible UI Displays =========================== -//============================================================================= - -// -// DGUS Touch Display with DWIN OS. (Choose one.) -// -//#define DGUS_LCD_UI_ORIGIN -//#define DGUS_LCD_UI_FYSETC -//#define DGUS_LCD_UI_HIPRECY - -// -// Touch-screen LCD for Malyan M200 printers -// -//#define MALYAN_LCD - -// -// Touch UI for FTDI EVE (FT800/FT810) displays -// See Configuration_adv.h for all configuration options. -// -//#define TOUCH_UI_FTDI_EVE - -// -// Third-party or vendor-customized controller interfaces. -// Sources should be installed in 'src/lcd/extensible_ui'. -// -//#define EXTENSIBLE_UI - -//============================================================================= -//=============================== Graphical TFTs ============================== -//============================================================================= - -// -// FSMC display (MKS Robin, Alfawise U20, JGAurora A5S, REXYZ A1, etc.) -// -//#define FSMC_GRAPHICAL_TFT - -//============================================================================= -//============================ Other Controllers ============================ -//============================================================================= - -// -// ADS7843/XPT2046 ADC Touchscreen such as ILI9341 2.8 -// -//#define TOUCH_BUTTONS -#if ENABLED(TOUCH_BUTTONS) - #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens - #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus - - #define XPT2046_X_CALIBRATION 12316 - #define XPT2046_Y_CALIBRATION -8981 - #define XPT2046_X_OFFSET -43 - #define XPT2046_Y_OFFSET 257 -#endif - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press - -//============================================================================= -//=============================== Extra Features ============================== -//============================================================================= - -// @section extras - -// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN - -// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency -// which is not as annoying as with the hardware PWM. On the other hand, if this frequency -// is too low, you should also increment SOFT_PWM_SCALE. -//#define FAN_SOFT_PWM - -// Incrementing this by 1 will double the software PWM frequency, -// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. -// However, control resolution will be halved for each increment; -// at zero value, there are 128 effective control positions. -// :[0,1,2,3,4,5,6,7] -#define SOFT_PWM_SCALE 0 - -// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can -// be used to mitigate the associated resolution loss. If enabled, -// some of the PWM cycles are stretched so on average the desired -// duty cycle is attained. -//#define SOFT_PWM_DITHER - -// Temperature status LEDs that display the hotend and bed temperature. -// If all hotends, bed temperature, and target temperature are under 54C -// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) -//#define TEMP_STAT_LEDS - -// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure -//#define SF_ARC_FIX - -// Support for the BariCUDA Paste Extruder -//#define BARICUDA - -// Support for BlinkM/CyzRgb -//#define BLINKM - -// Support for PCA9632 PWM LED driver -//#define PCA9632 - -// Support for PCA9533 PWM LED driver -// https://github.com/mikeshub/SailfishRGB_LED -//#define PCA9533 - -/** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * - * *** CAUTION *** - * LED Strips require a MOSFET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. - * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ -//#define RGB_LED -//#define RGBW_LED - -#if EITHER(RGB_LED, RGBW_LED) - //#define RGB_LED_R_PIN 34 - //#define RGB_LED_G_PIN 43 - //#define RGB_LED_B_PIN 35 - //#define RGB_LED_W_PIN -1 -#endif - -// Support for Adafruit Neopixel LED driver -//#define NEOPIXEL_LED -#if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin - //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE - //#define NEOPIXEL2_PIN 5 - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup - - // Use a single Neopixel LED for static (background) lighting - //#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use - //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W -#endif - -/** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ -#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS -#endif - -/** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ - -/** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ -//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command - -// (ms) Delay before the next move will start, to give the servo time to reach its target angle. -// 300ms is a good value but you can try less delay. -// If the servo can't reach the requested position, increase it. -#define SERVO_DELAY { 300 } - -// Only power servos during movement, otherwise leave off to prevent jitter -//#define DEACTIVATE_SERVOS_AFTER_MOVE - -// Allow servo angle to be edited and saved to EEPROM -//#define EDITABLE_SERVO_ANGLES diff --git a/config/examples/wt150/Configuration_adv.h b/config/examples/wt150/Configuration_adv.h deleted file mode 100644 index 8a1a7e783d..0000000000 --- a/config/examples/wt150/Configuration_adv.h +++ /dev/null @@ -1,2932 +0,0 @@ -/** - * Marlin 3D Printer Firmware - * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] - * - * Based on Sprinter and grbl. - * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - * - */ -#pragma once - -/** - * Configuration_adv.h - * - * Advanced settings. - * Only change these if you know exactly what you're doing. - * Some of these settings can damage your printer if improperly set! - * - * Basic settings can be found in Configuration.h - * - */ -#define CONFIGURATION_ADV_H_VERSION 020000 - -// @section temperature - -//=========================================================================== -//=============================Thermal Settings ============================ -//=========================================================================== - -// -// Custom Thermistor 1000 parameters -// -#if TEMP_SENSOR_0 == 1000 - #define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND0_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_1 == 1000 - #define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND1_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_2 == 1000 - #define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND2_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_3 == 1000 - #define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND3_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_4 == 1000 - #define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND4_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_5 == 1000 - #define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define HOTEND5_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_BED == 1000 - #define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define BED_BETA 3950 // Beta value -#endif - -#if TEMP_SENSOR_CHAMBER == 1000 - #define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor - #define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C - #define CHAMBER_BETA 3950 // Beta value -#endif - -// -// Hephestos 2 24V heated bed upgrade kit. -// https://store.bq.com/en/heated-bed-kit-hephestos2 -// -//#define HEPHESTOS2_HEATED_BED_KIT -#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) - #undef TEMP_SENSOR_BED - #define TEMP_SENSOR_BED 70 - #define HEATER_BED_INVERTING true -#endif - -/** - * Heated Chamber settings - */ -#if TEMP_SENSOR_CHAMBER - #define CHAMBER_MINTEMP 5 - #define CHAMBER_MAXTEMP 60 - #define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target - //#define CHAMBER_LIMIT_SWITCHING - //#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin - //#define HEATER_CHAMBER_INVERTING false -#endif - -#if DISABLED(PIDTEMPBED) - #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control - #if ENABLED(BED_LIMIT_SWITCHING) - #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS - #endif -#endif - -/** - * Thermal Protection provides additional protection to your printer from damage - * and fire. Marlin always includes safe min and max temperature ranges which - * protect against a broken or disconnected thermistor wire. - * - * The issue: If a thermistor falls out, it will report the much lower - * temperature of the air in the room, and the the firmware will keep - * the heater on. - * - * The solution: Once the temperature reaches the target, start observing. - * If the temperature stays too far below the target (hysteresis) for too - * long (period), the firmware will halt the machine as a safety precaution. - * - * If you get false positives for "Thermal Runaway", increase - * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD - */ -#if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds - #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius - - //#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops - #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP) - //#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303 - #endif - - /** - * Whenever an M104, M109, or M303 increases the target temperature, the - * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature - * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and - * requires a hard reset. This test restarts with any M104/M109/M303, but only - * if the current temperature is far enough below the target for a reliable - * test. - * - * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD - * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set - * below 2. - */ - #define WATCH_TEMP_PERIOD 20 // Seconds - #define WATCH_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the bed are just as above for hotends. - */ -#if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius - - /** - * As described above, except for the bed (M140/M190/M303). - */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds - #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius -#endif - -/** - * Thermal Protection parameters for the heated chamber. - */ -#if ENABLED(THERMAL_PROTECTION_CHAMBER) - #define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds - #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius - - /** - * Heated chamber watch settings (M141/M191). - */ - #define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds - #define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius -#endif - -#if ENABLED(PIDTEMP) - // Add an experimental additional term to the heater power, proportional to the extrusion speed. - // A well-chosen Kc value should add just enough power to melt the increased material volume. - //#define PID_EXTRUSION_SCALING - #if ENABLED(PID_EXTRUSION_SCALING) - #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) - #define LPQ_MAX_LEN 50 - #endif - - /** - * Add an experimental additional term to the heater power, proportional to the fan speed. - * A well-chosen Kf value should add just enough power to compensate for power-loss from the cooling fan. - * You can either just add a constant compensation with the DEFAULT_Kf value - * or follow the instruction below to get speed-dependent compensation. - * - * Constant compensation (use only with fanspeeds of 0% and 100%) - * --------------------------------------------------------------------- - * A good starting point for the Kf-value comes from the calculation: - * kf = (power_fan * eff_fan) / power_heater * 255 - * where eff_fan is between 0.0 and 1.0, based on fan-efficiency and airflow to the nozzle / heater. - * - * Example: - * Heater: 40W, Fan: 0.1A * 24V = 2.4W, eff_fan = 0.8 - * Kf = (2.4W * 0.8) / 40W * 255 = 12.24 - * - * Fan-speed dependent compensation - * -------------------------------- - * 1. To find a good Kf value, set the hotend temperature, wait for it to settle, and enable the fan (100%). - * Make sure PID_FAN_SCALING_LIN_FACTOR is 0 and PID_FAN_SCALING_ALTERNATIVE_DEFINITION is not enabled. - * If you see the temperature drop repeat the test, increasing the Kf value slowly, until the temperature - * drop goes away. If the temperature overshoots after enabling the fan, the Kf value is too big. - * 2. Note the Kf-value for fan-speed at 100% - * 3. Determine a good value for PID_FAN_SCALING_MIN_SPEED, which is around the speed, where the fan starts moving. - * 4. Repeat step 1. and 2. for this fan speed. - * 5. Enable PID_FAN_SCALING_ALTERNATIVE_DEFINITION and enter the two identified Kf-values in - * PID_FAN_SCALING_AT_FULL_SPEED and PID_FAN_SCALING_AT_MIN_SPEED. Enter the minimum speed in PID_FAN_SCALING_MIN_SPEED - */ - //#define PID_FAN_SCALING - #if ENABLED(PID_FAN_SCALING) - //#define PID_FAN_SCALING_ALTERNATIVE_DEFINITION - #if ENABLED(PID_FAN_SCALING_ALTERNATIVE_DEFINITION) - // The alternative definition is used for an easier configuration. - // Just figure out Kf at fullspeed (255) and PID_FAN_SCALING_MIN_SPEED. - // DEFAULT_Kf and PID_FAN_SCALING_LIN_FACTOR are calculated accordingly. - - #define PID_FAN_SCALING_AT_FULL_SPEED 13.0 //=PID_FAN_SCALING_LIN_FACTOR*255+DEFAULT_Kf - #define PID_FAN_SCALING_AT_MIN_SPEED 6.0 //=PID_FAN_SCALING_LIN_FACTOR*PID_FAN_SCALING_MIN_SPEED+DEFAULT_Kf - #define PID_FAN_SCALING_MIN_SPEED 10.0 // Minimum fan speed at which to enable PID_FAN_SCALING - - #define DEFAULT_Kf (255.0*PID_FAN_SCALING_AT_MIN_SPEED-PID_FAN_SCALING_AT_FULL_SPEED*PID_FAN_SCALING_MIN_SPEED)/(255.0-PID_FAN_SCALING_MIN_SPEED) - #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0 - - #else - #define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed) - #define DEFAULT_Kf 10 // A constant value added to the PID-tuner - #define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING - #endif - #endif -#endif - -/** - * Automatic Temperature: - * The hotend target temperature is calculated by all the buffered lines of gcode. - * The maximum buffered steps/sec of the extruder motor is called "se". - * Start autotemp mode with M109 S B F - * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by - * mintemp and maxtemp. Turn this off by executing M109 without F* - * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. - * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode - */ -#define AUTOTEMP -#if ENABLED(AUTOTEMP) - #define AUTOTEMP_OLDWEIGHT 0.98 -#endif - -// Show extra position information with 'M114 D' -//#define M114_DETAIL - -// Show Temperature ADC value -// Enable for M105 to include ADC values read from temperature sensors. -//#define SHOW_TEMP_ADC_VALUES - -/** - * High Temperature Thermistor Support - * - * Thermistors able to support high temperature tend to have a hard time getting - * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP - * will probably be caught when the heating element first turns on during the - * preheating process, which will trigger a min_temp_error as a safety measure - * and force stop everything. - * To circumvent this limitation, we allow for a preheat time (during which, - * min_temp_error won't be triggered) and add a min_temp buffer to handle - * aberrant readings. - * - * If you want to enable this feature for your hotend thermistor(s) - * uncomment and set values > 0 in the constants below - */ - -// The number of consecutive low temperature errors that can occur -// before a min_temp_error is triggered. (Shouldn't be more than 10.) -//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 - -// The number of milliseconds a hotend will preheat before starting to check -// the temperature. This value should NOT be set to the time it takes the -// hot end to reach the target temperature, but the time it takes to reach -// the minimum temperature your thermistor can read. The lower the better/safer. -// This shouldn't need to be more than 30 seconds (30000) -//#define MILLISECONDS_PREHEAT_TIME 0 - -// @section extruder - -// Extruder runout prevention. -// If the machine is idle and the temperature over MINTEMP -// then extrude some filament every couple of SECONDS. -//#define EXTRUDER_RUNOUT_PREVENT -#if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 190 - #define EXTRUDER_RUNOUT_SECONDS 30 - #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m) - #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm) -#endif - -// @section temperature - -// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. -// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 -#define TEMP_SENSOR_AD8495_OFFSET 0.0 -#define TEMP_SENSOR_AD8495_GAIN 1.0 - -/** - * Controller Fan - * To cool down the stepper drivers and MOSFETs. - * - * The fan will turn on automatically whenever any stepper is enabled - * and turn off after a set period after all steppers are turned off. - */ -//#define USE_CONTROLLER_FAN -#if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled - #define CONTROLLERFAN_SPEED 255 // 255 == full speed - //#define CONTROLLERFAN_SPEED_Z_ONLY 127 // Reduce noise on machines that keep Z enabled -#endif - -// When first starting the main fan, run it at full speed for the -// given number of milliseconds. This gets the fan spinning reliably -// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 - -// Some coolers may require a non-zero "off" state. -//#define FAN_OFF_PWM 1 - -/** - * PWM Fan Scaling - * - * Define the min/max speeds for PWM fans (as set with M106). - * - * With these options the M106 0-255 value range is scaled to a subset - * to ensure that the fan has enough power to spin, or to run lower - * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) - * Value 0 always turns off the fan. - * - * Define one or both of these to override the default 0-255 range. - */ -//#define FAN_MIN_PWM 50 -//#define FAN_MAX_PWM 128 - -/** - * FAST PWM FAN Settings - * - * Use to change the FAST FAN PWM frequency (if enabled in Configuration.h) - * Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a - * frequency as close as possible to the desired frequency. - * - * FAST_PWM_FAN_FREQUENCY [undefined by default] - * Set this to your desired frequency. - * If left undefined this defaults to F = F_CPU/(2*255*1) - * ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers - * These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required - * NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behavior. - * - * USE_OCR2A_AS_TOP [undefined by default] - * Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2: - * 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz] - * 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz] - * A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of - * PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.) - * USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies. - */ -#if ENABLED(FAST_PWM_FAN) - //#define FAST_PWM_FAN_FREQUENCY 31400 - //#define USE_OCR2A_AS_TOP -#endif - -// @section extruder - -/** - * Extruder cooling fans - * - * Extruder auto fans automatically turn on when their extruders' - * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. - * - * Your board's pins file specifies the recommended pins. Override those here - * or set to -1 to disable completely. - * - * Multiple extruders can be assigned to the same pin in which case - * the fan will turn on when any selected extruder is above the threshold. - */ -//#define E0_AUTO_FAN_PIN -1 -#define E1_AUTO_FAN_PIN -1 -#define E2_AUTO_FAN_PIN -1 -#define E3_AUTO_FAN_PIN -1 -#define E4_AUTO_FAN_PIN -1 -#define E5_AUTO_FAN_PIN -1 -#define CHAMBER_AUTO_FAN_PIN -1 - -#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 -#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed -#define CHAMBER_AUTO_FAN_TEMPERATURE 30 -#define CHAMBER_AUTO_FAN_SPEED 255 - -/** - * Part-Cooling Fan Multiplexer - * - * This feature allows you to digitally multiplex the fan output. - * The multiplexer is automatically switched at tool-change. - * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. - */ -#define FANMUX0_PIN -1 -#define FANMUX1_PIN -1 -#define FANMUX2_PIN -1 - -/** - * M355 Case Light on-off / brightness - */ -//#define CASE_LIGHT_ENABLE -#if ENABLED(CASE_LIGHT_ENABLE) - //#define CASE_LIGHT_PIN 4 // Override the default pin if needed - #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW - #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on - #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) - //#define CASE_LIGHT_MAX_PWM 128 // Limit pwm - //#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu - //#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting. - //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. - #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) - #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } - #endif -#endif - -// @section homing - -// If you want endstops to stay on (by default) even when not homing -// enable this option. Override at any time with M120, M121. -//#define ENDSTOPS_ALWAYS_ON_DEFAULT - -// @section extras - -//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. - -// Employ an external closed loop controller. Override pins here if needed. -//#define EXTERNAL_CLOSED_LOOP_CONTROLLER -#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER) - //#define CLOSED_LOOP_ENABLE_PIN -1 - //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1 -#endif - -/** - * Dual Steppers / Dual Endstops - * - * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. - * - * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to - * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop - * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug - * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. - * - * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors - * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error - * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. - */ - -//#define X_DUAL_STEPPER_DRIVERS -#if ENABLED(X_DUAL_STEPPER_DRIVERS) - #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions - //#define X_DUAL_ENDSTOPS - #if ENABLED(X_DUAL_ENDSTOPS) - #define X2_USE_ENDSTOP _XMAX_ - #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Y_DUAL_STEPPER_DRIVERS -#if ENABLED(Y_DUAL_STEPPER_DRIVERS) - #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions - //#define Y_DUAL_ENDSTOPS - #if ENABLED(Y_DUAL_ENDSTOPS) - #define Y2_USE_ENDSTOP _YMAX_ - #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_DUAL_STEPPER_DRIVERS -#if ENABLED(Z_DUAL_STEPPER_DRIVERS) - //#define Z_DUAL_ENDSTOPS - #if ENABLED(Z_DUAL_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 - #endif -#endif - -//#define Z_TRIPLE_STEPPER_DRIVERS -#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS) - //#define Z_TRIPLE_ENDSTOPS - #if ENABLED(Z_TRIPLE_ENDSTOPS) - #define Z2_USE_ENDSTOP _XMAX_ - #define Z3_USE_ENDSTOP _YMAX_ - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0 - #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0 - #endif -#endif - -/** - * Dual X Carriage - * - * This setup has two X carriages that can move independently, each with its own hotend. - * The carriages can be used to print an object with two colors or materials, or in - * "duplication mode" it can print two identical or X-mirrored objects simultaneously. - * The inactive carriage is parked automatically to prevent oozing. - * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. - * By default the X2 stepper is assigned to the first unused E plug on the board. - * - * The following Dual X Carriage modes can be selected with M605 S: - * - * 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel - * results as long as it supports dual X-carriages. (M605 S0) - * - * 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so - * that additional slicer support is not required. (M605 S1) - * - * 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with - * the first X-carriage and extruder, to print 2 copies of the same object at the same time. - * Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S2 to initiate duplicated movement. - * - * 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates - * the movement of the first except the second extruder is reversed in the X axis. - * Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and - * follow with M605 S3 to initiate mirrored movement. - */ -//#define DUAL_X_CARRIAGE -#if ENABLED(DUAL_X_CARRIAGE) - #define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS - #define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage - #define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage - #define X2_MAX_POS 353 // Set this to the distance between toolheads when both heads are homed - #define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position - #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS. - // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software - // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops - // without modifying the firmware (through the "M218 T1 X???" command). - // Remember: you should set the second extruder x-offset to 0 in your slicer. - - // This is the default power-up mode which can be later using M605. - #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE - - // Default x offset in duplication mode (typically set to half print bed width) - #define DEFAULT_DUPLICATION_X_OFFSET 100 - -#endif // DUAL_X_CARRIAGE - -// Activate a solenoid on the active extruder with M380. Disable all with M381. -// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. -//#define EXT_SOLENOID - -// @section homing - -// Homing hits each endstop, retracts by these distances, then does a slower bump. -#define X_HOME_BUMP_MM 5 -#define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 -#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially -//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing - -// When G28 is called, this option will make Y home before X -//#define HOME_Y_BEFORE_X - -// Enable this if X or Y can't home without homing the other axis first. -//#define CODEPENDENT_XY_HOMING - -#if ENABLED(BLTOUCH) - /** - * Either: Use the defaults (recommended) or: For special purposes, use the following DEFINES - * Do not activate settings that the probe might not understand. Clones might misunderstand - * advanced commands. - * - * Note: If the probe is not deploying, check a "Cmd: Reset" and "Cmd: Self-Test" and then - * check the wiring of the BROWN, RED and ORANGE wires. - * - * Note: If the trigger signal of your probe is not being recognized, it has been very often - * because the BLACK and WHITE wires needed to be swapped. They are not "interchangeable" - * like they would be with a real switch. So please check the wiring first. - * - * Settings for all BLTouch and clone probes: - */ - - // Safety: The probe needs time to recognize the command. - // Minimum command delay (ms). Enable and increase if needed. - //#define BLTOUCH_DELAY 500 - - /** - * Settings for BLTOUCH Classic 1.2, 1.3 or BLTouch Smart 1.0, 2.0, 2.2, 3.0, 3.1, and most clones: - */ - - // Feature: Switch into SW mode after a deploy. It makes the output pulse longer. Can be useful - // in special cases, like noisy or filtered input configurations. - //#define BLTOUCH_FORCE_SW_MODE - - /** - * Settings for BLTouch Smart 3.0 and 3.1 - * Summary: - * - Voltage modes: 5V and OD (open drain - "logic voltage free") output modes - * - High-Speed mode - * - Disable LCD voltage options - */ - - /** - * Danger: Don't activate 5V mode unless attached to a 5V-tolerant controller! - * V3.0 or 3.1: Set default mode to 5V mode at Marlin startup. - * If disabled, OD mode is the hard-coded default on 3.0 - * On startup, Marlin will compare its eeprom to this vale. If the selected mode - * differs, a mode set eeprom write will be completed at initialization. - * Use the option below to force an eeprom write to a V3.1 probe regardless. - */ - //#define BLTOUCH_SET_5V_MODE - - /** - * Safety: Activate if connecting a probe with an unknown voltage mode. - * V3.0: Set a probe into mode selected above at Marlin startup. Required for 5V mode on 3.0 - * V3.1: Force a probe with unknown mode into selected mode at Marlin startup ( = Probe EEPROM write ) - * To preserve the life of the probe, use this once then turn it off and re-flash. - */ - //#define BLTOUCH_FORCE_MODE_SET - - /** - * Use "HIGH SPEED" mode for probing. - * Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems. - * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function - * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state. - */ - //#define BLTOUCH_HS_MODE - - // Safety: Enable voltage mode settings in the LCD menu. - //#define BLTOUCH_LCD_VOLTAGE_MENU - -#endif // BLTOUCH - -/** - * Z Steppers Auto-Alignment - * Add the G34 command to align multiple Z steppers using a bed probe. - */ -//#define Z_STEPPER_AUTO_ALIGN -#if ENABLED(Z_STEPPER_AUTO_ALIGN) - // Define probe X and Y positions for Z1, Z2 [, Z3] - #define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } } - - // Provide Z stepper positions for more rapid convergence in bed alignment. - // Currently requires triple stepper drivers. - //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS - #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS) - // Define Stepper XY positions for Z1, Z2, Z3 corresponding to - // the Z screw positions in the bed carriage. - // Define one position per Z stepper in stepper driver order. - #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } } - #else - // Amplification factor. Used to scale the correction step up or down. - // In case the stepper (spindle) position is further out than the test point. - // Use a value > 1. NOTE: This may cause instability - #define Z_STEPPER_ALIGN_AMP 1.0 - #endif - - // Set number of iterations to align - #define Z_STEPPER_ALIGN_ITERATIONS 3 - - // Enable to restore leveling setup after operation - #define RESTORE_LEVELING_AFTER_G34 - - // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm - #define G34_MAX_GRADE 5 // (%) Maximum incline G34 will handle - - // Stop criterion. If the accuracy is better than this stop iterating early - #define Z_STEPPER_ALIGN_ACC 0.02 -#endif - -// @section motion - -#define AXIS_RELATIVE_MODES { false, false, false, false } - -// Add a Duplicate option for well-separated conjoined nozzles -//#define MULTI_NOZZLE_DUPLICATION - -// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. -#define INVERT_X_STEP_PIN false -#define INVERT_Y_STEP_PIN false -#define INVERT_Z_STEP_PIN false -#define INVERT_E_STEP_PIN false - -// Default stepper release if idle. Set to 0 to deactivate. -// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. -// Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // Set to false if the nozzle will fall down on your printed part when print has finished. -#define DISABLE_INACTIVE_E true - -#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate -#define DEFAULT_MINTRAVELFEEDRATE 0.0 - -//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated - -// Minimum time that a segment needs to take if the buffer is emptied -#define DEFAULT_MINSEGMENTTIME 20000 // (ms) - -// If defined the movements slow down when the look ahead buffer is only half full -#define SLOWDOWN - -// Frequency limit -// See nophead's blog for more info -// Not working O -//#define XY_FREQUENCY_LIMIT 15 - -// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end -// of the buffer and all stops. This should not be much greater than zero and should only be changed -// if unwanted behavior is observed on a user's machine when running at very slow speeds. -#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s) - -// -// Backlash Compensation -// Adds extra movement to axes on direction-changes to account for backlash. -// -//#define BACKLASH_COMPENSATION -#if ENABLED(BACKLASH_COMPENSATION) - // Define values for backlash distance and correction. - // If BACKLASH_GCODE is enabled these values are the defaults. - #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) - #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction - - // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments - // to reduce print artifacts. (Enabling this is costly in memory and computation!) - //#define BACKLASH_SMOOTHING_MM 3 // (mm) - - // Add runtime configuration and tuning of backlash values (M425) - //#define BACKLASH_GCODE - - #if ENABLED(BACKLASH_GCODE) - // Measure the Z backlash when probing (G29) and set with "M425 Z" - #define MEASURE_BACKLASH_WHEN_PROBING - - #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING) - // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT - // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION - // increments while checking for the contact to be broken. - #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm) - #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm) - #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m) - #endif - #endif -#endif - -/** - * Automatic backlash, position and hotend offset calibration - * - * Enable G425 to run automatic calibration using an electrically- - * conductive cube, bolt, or washer mounted on the bed. - * - * G425 uses the probe to touch the top and sides of the calibration object - * on the bed and measures and/or correct positional offsets, axis backlash - * and hotend offsets. - * - * Note: HOTEND_OFFSET and CALIBRATION_OBJECT_CENTER must be set to within - * ±5mm of true values for G425 to succeed. - */ -//#define CALIBRATION_GCODE -#if ENABLED(CALIBRATION_GCODE) - - #define CALIBRATION_MEASUREMENT_RESOLUTION 0.01 // mm - - #define CALIBRATION_FEEDRATE_SLOW 60 // mm/m - #define CALIBRATION_FEEDRATE_FAST 1200 // mm/m - #define CALIBRATION_FEEDRATE_TRAVEL 3000 // mm/m - - // The following parameters refer to the conical section of the nozzle tip. - #define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm - #define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm - - // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM). - //#define CALIBRATION_REPORTING - - // The true location and dimension the cube/bolt/washer on the bed. - #define CALIBRATION_OBJECT_CENTER { 264.0, -22.0, -2.0 } // mm - #define CALIBRATION_OBJECT_DIMENSIONS { 10.0, 10.0, 10.0 } // mm - - // Comment out any sides which are unreachable by the probe. For best - // auto-calibration results, all sides must be reachable. - #define CALIBRATION_MEASURE_RIGHT - #define CALIBRATION_MEASURE_FRONT - #define CALIBRATION_MEASURE_LEFT - #define CALIBRATION_MEASURE_BACK - - // Probing at the exact top center only works if the center is flat. If - // probing on a screwhead or hollow washer, probe near the edges. - //#define CALIBRATION_MEASURE_AT_TOP_EDGES - - // Define pin which is read during calibration - #ifndef CALIBRATION_PIN - #define CALIBRATION_PIN -1 // Override in pins.h or set to -1 to use your Z endstop - #define CALIBRATION_PIN_INVERTING false // Set to true to invert the pin - //#define CALIBRATION_PIN_PULLDOWN - #define CALIBRATION_PIN_PULLUP - #endif -#endif - -/** - * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies - * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible - * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the - * lowest stepping frequencies. - */ -//#define ADAPTIVE_STEP_SMOOTHING - -/** - * Custom Microstepping - * Override as-needed for your setup. Up to 3 MS pins are supported. - */ -//#define MICROSTEP1 LOW,LOW,LOW -//#define MICROSTEP2 HIGH,LOW,LOW -//#define MICROSTEP4 LOW,HIGH,LOW -//#define MICROSTEP8 HIGH,HIGH,LOW -//#define MICROSTEP16 LOW,LOW,HIGH -//#define MICROSTEP32 HIGH,LOW,HIGH - -// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16] - -/** - * @section stepper motor current - * - * Some boards have a means of setting the stepper motor current via firmware. - * - * The power on motor currents are set by: - * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 - * known compatible chips: A4982 - * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H - * known compatible chips: AD5206 - * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 - * known compatible chips: MCP4728 - * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE - * known compatible chips: MCP4451, MCP4018 - * - * Motor currents can also be set by M907 - M910 and by the LCD. - * M907 - applies to all. - * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H - * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 - */ -//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) -//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis - -// Uncomment to enable an I2C based DIGIPOT like on the Azteeg X3 Pro -#define DIGIPOT_I2C - -#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) // Default to settings in pins_XXXX.h files - /** - * Common slave addresses: - * - * A (A shifted) B (B shifted) IC - * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 - * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI 0x2C (0x58) 0x2E (0x5C) MCP4451 - * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451 - * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 - */ - #define DIGIPOT_I2C_ADDRESS_A 0x2F // unshifted slave address for DIGIPOT (5E <- 2F << 1) - //#define DIGIPOT_I2C_ADDRESS_B 0x2D // one DIGIPOT on this board -#endif - -#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster -#define DIGIPOT_I2C_NUM_CHANNELS 5 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5 -// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. -// These correspond to the physical drivers, so be mindful if the order is changed. -#define DIGIPOT_I2C_MOTOR_CURRENTS { 0.22, 0.22, 0.39, 0.42, 0.42 } // MIGHTYBOARD_REVE - -//=========================================================================== -//=============================Additional Features=========================== -//=========================================================================== - -// @section lcd - -#if EITHER(ULTIPANEL, EXTENSIBLE_UI) - #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel - #define SHORT_MANUAL_Z_MOVE 0.025 // (mm) Smallest manual Z move (< 0.1mm) - #if ENABLED(ULTIPANEL) - #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position" - #define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen - #endif -#endif - -// Change values more rapidly when the encoder is rotated faster -#define ENCODER_RATE_MULTIPLIER -#if ENABLED(ENCODER_RATE_MULTIPLIER) - #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed - #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed -#endif - -// Play a beep when the feedrate is changed from the Status Screen -//#define BEEP_ON_FEEDRATE_CHANGE -#if ENABLED(BEEP_ON_FEEDRATE_CHANGE) - #define FEEDRATE_CHANGE_BEEP_DURATION 10 - #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440 -#endif - -#if HAS_LCD_MENU - - // Include a page of printer information in the LCD Main Menu - #define LCD_INFO_MENU - #if ENABLED(LCD_INFO_MENU) - //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages - #endif - - // BACK menu items keep the highlight at the top - //#define TURBO_BACK_MENU_ITEM - - /** - * LED Control Menu - * Add LED Control to the LCD menu - */ - //#define LED_CONTROL_MENU - #if ENABLED(LED_CONTROL_MENU) - #define LED_COLOR_PRESETS // Enable the Preset Color menu option - #if ENABLED(LED_COLOR_PRESETS) - #define LED_USER_PRESET_RED 255 // User defined RED value - #define LED_USER_PRESET_GREEN 128 // User defined GREEN value - #define LED_USER_PRESET_BLUE 0 // User defined BLUE value - #define LED_USER_PRESET_WHITE 255 // User defined WHITE value - #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity - //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup - #endif - #endif - -#endif // HAS_LCD_MENU - -// Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING - -// On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - -// The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 - -// Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY - -// Show the E position (filament used) during printing -//#define LCD_SHOW_E_TOTAL - -#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS - //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits - //#define SHOW_REMAINING_TIME // Display estimated time to completion - #if ENABLED(SHOW_REMAINING_TIME) - //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation - //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time - #endif -#endif - -#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS - //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing - #if ENABLED(LCD_PROGRESS_BAR) - #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar - #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message - #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) - //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it - //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar - #endif -#endif - -#if ENABLED(SDSUPPORT) - - // Some RAMPS and other boards don't detect when an SD card is inserted. You can work - // around this by connecting a push button or single throw switch to the pin defined - // as SD_DETECT_PIN in your board's pins definitions. - // This setting should be disabled unless you are using a push button, pulling the pin to ground. - // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). - #define SD_DETECT_INVERTED - - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place. - - // Reverse SD sort to show "more recent" files first, according to the card's FAT. - // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. - #define SDCARD_RATHERRECENTFIRST - - #define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing - - //#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files - - #define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27") - - /** - * Continue after Power-Loss (Creality3D) - * - * Store the current state to the SD Card at the start of each layer - * during SD printing. If the recovery file is found at boot time, present - * an option on the LCD screen to continue the print from the last-known - * point in the file. - */ - //#define POWER_LOSS_RECOVERY - #if ENABLED(POWER_LOSS_RECOVERY) - //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss - //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) - //#define POWER_LOSS_PIN 44 // Pin to detect power loss - //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss - //#define POWER_LOSS_PULL // Set pullup / pulldown as appropriate - //#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume - //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power. - - // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card, - // especially with "vase mode" printing. Set too high and vases cannot be continued. - #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data - #endif - - /** - * Sort SD file listings in alphabetical order. - * - * With this option enabled, items on SD cards will be sorted - * by name for easier navigation. - * - * By default... - * - * - Use the slowest -but safest- method for sorting. - * - Folders are sorted to the top. - * - The sort key is statically allocated. - * - No added G-code (M34) support. - * - 40 item sorting limit. (Items after the first 40 are unsorted.) - * - * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the - * compiler to calculate the worst-case usage and throw an error if the SRAM - * limit is exceeded. - * - * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. - * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. - * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) - * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) - */ - //#define SDCARD_SORT_ALPHA - - // SD Card Sorting options - #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. - #define FOLDER_SORTING -1 // -1=above 0=none 1=below - #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. - #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) - #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. - #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! - #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. - // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. - #endif - - // This allows hosts to request long names for files and folders with M33 - //#define LONG_FILENAME_HOST_SUPPORT - - // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES - - // Leave the heaters on after Stop Print (not recommended!) - //#define SD_ABORT_NO_COOLDOWN - - /** - * This option allows you to abort SD printing when any endstop is triggered. - * This feature must be enabled with "M540 S1" or from the LCD menu. - * To have any effect, endstops must be enabled during SD printing. - */ - //#define SD_ABORT_ON_ENDSTOP_HIT - - /** - * This option makes it easier to print the same SD Card file again. - * On print completion the LCD Menu will open with the file selected. - * You can just click to start the print, or navigate elsewhere. - */ - //#define SD_REPRINT_LAST_SELECTED_FILE - - /** - * Auto-report SdCard status with M27 S - */ - //#define AUTO_REPORT_SD_STATUS - - /** - * Support for USB thumb drives using an Arduino USB Host Shield or - * equivalent MAX3421E breakout board. The USB thumb drive will appear - * to Marlin as an SD card. - * - * The MAX3421E can be assigned the same pins as the SD card reader, with - * the following pin mapping: - * - * SCLK, MOSI, MISO --> SCLK, MOSI, MISO - * INT --> SD_DETECT_PIN [1] - * SS --> SDSS - * - * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility. - */ - //#define USB_FLASH_DRIVE_SUPPORT - #if ENABLED(USB_FLASH_DRIVE_SUPPORT) - #define USB_CS_PIN SDSS - #define USB_INTR_PIN SD_DETECT_PIN - - /** - * USB Host Shield Library - * - * - UHS2 uses no interrupts and has been production-tested - * on a LulzBot TAZ Pro with a 32-bit Archim board. - * - * - UHS3 is newer code with better USB compatibility. But it - * is less tested and is known to interfere with Servos. - * [1] This requires USB_INTR_PIN to be interrupt-capable. - */ - //#define USE_UHS3_USB - #endif - - /** - * When using a bootloader that supports SD-Firmware-Flashing, - * add a menu item to activate SD-FW-Update on the next reboot. - * - * Requires ATMEGA2560 (Arduino Mega) - * - * Tested with this bootloader: - * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560 - */ - //#define SD_FIRMWARE_UPDATE - #if ENABLED(SD_FIRMWARE_UPDATE) - #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF - #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0 - #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF - #endif - - // Add an optimized binary file transfer mode, initiated with 'M28 B1' - //#define BINARY_FILE_TRANSFER - - #if HAS_SDCARD_CONNECTION - /** - * Set this option to one of the following (or the board's defaults apply): - * - * LCD - Use the SD drive in the external LCD controller. - * ONBOARD - Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.) - * CUSTOM_CABLE - Use a custom cable to access the SD (as defined in a pins file). - * - * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ] - */ - //#define SDCARD_CONNECTION LCD - #endif - -#endif // SDSUPPORT - -/** - * By default an onboard SD card reader may be shared as a USB mass- - * storage device. This option hides the SD card from the host PC. - */ -//#define NO_SD_HOST_DRIVE // Disable SD Card access over USB (for security). - -/** - * Additional options for Graphical Displays - * - * Use the optimizations here to improve printing performance, - * which can be adversely affected by graphical display drawing, - * especially when doing several short moves, and when printing - * on DELTA and SCARA machines. - * - * Some of these options may result in the display lagging behind - * controller events, as there is a trade-off between reliable - * printing performance versus fast display updates. - */ -#if HAS_GRAPHICAL_LCD - // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT - - // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME - - // Enable to save many cycles by drawing a hollow frame on Menu Screens - #define MENU_HOLLOW_FRAME - - // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - - // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. - // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_SMALL_INFOFONT - - // Enable this option and reduce the value to optimize screen updates. - // The normal delay is 10µs. Use the lowest value that still gives a reliable display. - //#define DOGM_SPI_DELAY_US 5 - - // Swap the CW/CCW indicators in the graphics overlay - //#define OVERLAY_GFX_REVERSE - - /** - * ST7920-based LCDs can emulate a 16 x 4 character display using - * the ST7920 character-generator for very fast screen updates. - * Enable LIGHTWEIGHT_UI to use this special display mode. - * - * Since LIGHTWEIGHT_UI has limited space, the position and status - * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the - * length of time to display the status message before clearing. - * - * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. - * This will prevent position updates from being displayed. - */ - #if ENABLED(U8GLIB_ST7920) - //#define LIGHTWEIGHT_UI - #if ENABLED(LIGHTWEIGHT_UI) - #define STATUS_EXPIRE_SECONDS 20 - #endif - #endif - - /** - * Status (Info) Screen customizations - * These options may affect code size and screen render time. - * Custom status screens can forcibly override these settings. - */ - //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones - //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends) - #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM) - #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating - #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating - #define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating - //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap - //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap - //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames - //#define STATUS_HEAT_PERCENT // Show heating in a progress bar - //#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash) - //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM. - - // Frivolous Game Options - //#define MARLIN_BRICKOUT - //#define MARLIN_INVADERS - //#define MARLIN_SNAKE - //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu - -#endif // HAS_GRAPHICAL_LCD - -// -// Additional options for DGUS / DWIN displays -// -#if HAS_DGUS_LCD - #define DGUS_SERIAL_PORT 2 - #define DGUS_BAUDRATE 115200 - - #define DGUS_RX_BUFFER_SIZE 128 - #define DGUS_TX_BUFFER_SIZE 48 - //#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR) - - #define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates - #define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen - - #if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY) - #define DGUS_PRINT_FILENAME // Display the filename during printing - #define DGUS_PREHEAT_UI // Display a preheat screen during heatup - - #if ENABLED(DGUS_LCD_UI_FYSETC) - //#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC - #else - #define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY - #endif - - #define DGUS_FILAMENT_LOADUNLOAD - #if ENABLED(DGUS_FILAMENT_LOADUNLOAD) - #define DGUS_FILAMENT_PURGE_LENGTH 10 - #define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS - #endif - - #define DGUS_UI_WAITING // Show a "waiting" screen between some screens - #if ENABLED(DGUS_UI_WAITING) - #define DGUS_UI_WAITING_STATUS 10 - #define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping - #endif - #endif -#endif // HAS_DGUS_LCD - -// -// Touch UI for the FTDI Embedded Video Engine (EVE) -// -#if ENABLED(TOUCH_UI_FTDI_EVE) - // Display board used - //#define LCD_FTDI_VM800B35A // FTDI 3.5" with FT800 (320x240) - //#define LCD_4DSYSTEMS_4DLCD_FT843 // 4D Systems 4.3" (480x272) - //#define LCD_HAOYU_FT800CB // Haoyu with 4.3" or 5" (480x272) - //#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480) - //#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI - - // Correct the resolution if not using the stock TFT panel. - //#define TOUCH_UI_320x240 - //#define TOUCH_UI_480x272 - //#define TOUCH_UI_800x480 - - // Mappings for boards with a standard RepRapDiscount Display connector - //#define AO_EXP1_PINMAP // AlephObjects CLCD UI EXP1 mapping - //#define AO_EXP2_PINMAP // AlephObjects CLCD UI EXP2 mapping - //#define CR10_TFT_PINMAP // Rudolph Riedel's CR10 pin mapping - //#define OTHER_PIN_LAYOUT // Define pins manually below - #if ENABLED(OTHER_PIN_LAYOUT) - // The pins for CS and MOD_RESET (PD) must be chosen. - #define CLCD_MOD_RESET 9 - #define CLCD_SPI_CS 10 - - // If using software SPI, specify pins for SCLK, MOSI, MISO - //#define CLCD_USE_SOFT_SPI - #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI 11 - #define CLCD_SOFT_SPI_MISO 12 - #define CLCD_SOFT_SPI_SCLK 13 - #endif - #endif - - // Display Orientation. An inverted (i.e. upside-down) display - // is supported on the FT800. The FT810 and beyond also support - // portrait and mirrored orientations. - //#define TOUCH_UI_INVERTED - //#define TOUCH_UI_PORTRAIT - //#define TOUCH_UI_MIRRORED - - // UTF8 processing and rendering. - // Unsupported characters are shown as '?'. - //#define TOUCH_UI_USE_UTF8 - #if ENABLED(TOUCH_UI_USE_UTF8) - // Western accents support. These accented characters use - // combined bitmaps and require relatively little storage. - #define TOUCH_UI_UTF8_WESTERN_CHARSET - #if ENABLED(TOUCH_UI_UTF8_WESTERN_CHARSET) - // Additional character groups. These characters require - // full bitmaps and take up considerable storage: - //#define TOUCH_UI_UTF8_SUPERSCRIPTS // ¹ ² ³ - //#define TOUCH_UI_UTF8_COPYRIGHT // © ® - //#define TOUCH_UI_UTF8_GERMANIC // ß - //#define TOUCH_UI_UTF8_SCANDINAVIAN // Æ Ð Ø Þ æ ð ø þ - //#define TOUCH_UI_UTF8_PUNCTUATION // « » ¿ ¡ - //#define TOUCH_UI_UTF8_CURRENCY // ¢ £ ¤ ¥ - //#define TOUCH_UI_UTF8_ORDINALS // º ª - //#define TOUCH_UI_UTF8_MATHEMATICS // ± × ÷ - //#define TOUCH_UI_UTF8_FRACTIONS // ¼ ½ ¾ - //#define TOUCH_UI_UTF8_SYMBOLS // µ ¶ ¦ § ¬ - #endif - #endif - - // Use a smaller font when labels don't fit buttons - #define TOUCH_UI_FIT_TEXT - - // Allow language selection from menu at run-time (otherwise use LCD_LANGUAGE) - //#define LCD_LANGUAGE_1 en - //#define LCD_LANGUAGE_2 fr - //#define LCD_LANGUAGE_3 de - //#define LCD_LANGUAGE_4 es - //#define LCD_LANGUAGE_5 it - - // Use a numeric passcode for "Screen lock" keypad. - // (recommended for smaller displays) - //#define TOUCH_UI_PASSCODE - - // Output extra debug info for Touch UI events - //#define TOUCH_UI_DEBUG - - // Developer menu (accessed by touching "About Printer" copyright text) - //#define TOUCH_UI_DEVELOPER_MENU -#endif - -// -// FSMC Graphical TFT -// -#if ENABLED(FSMC_GRAPHICAL_TFT) - //#define TFT_MARLINUI_COLOR 0xFFFF // White - //#define TFT_MARLINBG_COLOR 0x0000 // Black - //#define TFT_DISABLED_COLOR 0x0003 // Almost black - //#define TFT_BTCANCEL_COLOR 0xF800 // Red - //#define TFT_BTARROWS_COLOR 0xDEE6 // 11011 110111 00110 Yellow - //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan -#endif - -// @section safety - -/** - * The watchdog hardware timer will do a reset and disable all outputs - * if the firmware gets too overloaded to read the temperature sensors. - * - * If you find that watchdog reboot causes your AVR board to hang forever, - * enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO. - * NOTE: This method is less reliable as it can only catch hangups while - * interrupts are enabled. - */ -#define USE_WATCHDOG -#if ENABLED(USE_WATCHDOG) - //#define WATCHDOG_RESET_MANUAL -#endif - -// @section lcd - -/** - * Babystepping enables movement of the axes by tiny increments without changing - * the current position values. This feature is used primarily to adjust the Z - * axis in the first layer of a print in real-time. - * - * Warning: Does not respect endstops! - */ -//#define BABYSTEPPING -#if ENABLED(BABYSTEPPING) - //#define BABYSTEP_WITHOUT_HOMING - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion. - #define BABYSTEP_MULTIPLICATOR_XY 1 - - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING) - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement). - //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle. - #if ENABLED(MOVE_Z_WHEN_IDLE) - #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size. - #endif - #endif - - //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28 - - //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping - #if ENABLED(BABYSTEP_ZPROBE_OFFSET) - //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor - #endif -#endif - -// @section extruder - -/** - * Linear Pressure Control v1.5 - * - * Assumption: advance [steps] = k * (delta velocity [steps/s]) - * K=0 means advance disabled. - * - * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! - * - * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. - * Larger K values will be needed for flexible filament and greater distances. - * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) - * print acceleration will be reduced during the affected moves to keep within the limit. - * - * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. - * Mention @Sebastianv650 on GitHub to alert the author of any issues. - */ -//#define LIN_ADVANCE -#if ENABLED(LIN_ADVANCE) - //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed - //#define LA_DEBUG // If enabled, this will generate debug information output over USB. -#endif - -// @section leveling - -/** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 -#endif - -/** - * Override MIN_PROBE_EDGE for each side of the build plate - * Useful to get probe points to exact positions on targets or - * to allow leveling to avoid plate clamps on only specific - * sides of the bed. With NOZZLE_AS_PROBE negative values are - * allowed, to permit probing outside the bed. - * - * If you are replacing the prior *_PROBE_BED_POSITION options, - * LEFT and FRONT values in most cases will map directly over - * RIGHT and REAR would be the inverse such as - * (X/Y_BED_SIZE - RIGHT/BACK_PROBE_BED_POSITION) - * - * This will allow all positions to match at compilation, however - * should the probe position be modified with M851XY then the - * probe points will follow. This prevents any change from causing - * the probe to be unable to reach any points. - */ -#if PROBE_SELECTED && !IS_KINEMATIC - //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE - //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE -#endif - -#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL) - // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET - //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) - //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) -#endif - -/** - * Repeatedly attempt G29 leveling until it succeeds. - * Stop after G29_MAX_RETRIES attempts. - */ -//#define G29_RETRY_AND_RECOVER -#if ENABLED(G29_RETRY_AND_RECOVER) - #define G29_MAX_RETRIES 3 - #define G29_HALT_ON_FAILURE - /** - * Specify the GCODE commands that will be executed when leveling succeeds, - * between attempts, and after the maximum number of retries have been tried. - */ - #define G29_SUCCESS_COMMANDS "M117 Bed leveling done." - #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0" - #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1" - -#endif - -// @section extras - -// -// G2/G3 Arc Support -// -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes -#if ENABLED(ARC_SUPPORT) - #define MM_PER_ARC_SEGMENT 1 // (mm) Length (or minimum length) of each arc segment - #define MIN_ARC_SEGMENTS 24 // Minimum number of segments in a complete circle - //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum) - #define N_ARC_CORRECTION 25 // Number of interpolated segments between corrections - //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles - //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes -#endif - -// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. -//#define BEZIER_CURVE_SUPPORT - -/** - * G38 Probe Target - * - * This option adds G38.2 and G38.3 (probe towards target) - * and optionally G38.4 and G38.5 (probe away from target). - * Set MULTIPLE_PROBING for G38 to probe more than once. - */ -//#define G38_PROBE_TARGET -#if ENABLED(G38_PROBE_TARGET) - //#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target - #define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move. -#endif - -// Moves (or segments) with fewer steps than this will be joined with the next move -#define MIN_STEPS_PER_SEGMENT 6 - -/** - * Minimum delay before and after setting the stepper DIR (in ns) - * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) - * 20 : Minimum for TMC2xxx drivers - * 200 : Minimum for A4988 drivers - * 400 : Minimum for A5984 drivers - * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) - * 650 : Minimum for DRV8825 drivers - * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) - * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_POST_DIR_DELAY 650 -//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650 - -/** - * Minimum stepper driver pulse width (in µs) - * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers - * 0 : Minimum 500ns for LV8729, adjusted in stepper.h - * 1 : Minimum for A4988 and A5984 stepper drivers - * 2 : Minimum for DRV8825 stepper drivers - * 3 : Minimum for TB6600 stepper drivers - * 30 : Minimum for TB6560 stepper drivers - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MINIMUM_STEPPER_PULSE 2 - -/** - * Maximum stepping rate (in Hz) the stepper driver allows - * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) - * 5000000 : Maximum for TMC2xxx stepper drivers - * 1000000 : Maximum for LV8729 stepper driver - * 500000 : Maximum for A4988 stepper driver - * 250000 : Maximum for DRV8825 stepper driver - * 150000 : Maximum for TB6600 stepper driver - * 15000 : Maximum for TB6560 stepper driver - * - * Override the default value based on the driver type set in Configuration.h. - */ -//#define MAXIMUM_STEPPER_RATE 250000 - -// @section temperature - -// Control heater 0 and heater 1 in parallel. -//#define HEATERS_PARALLEL - -//=========================================================================== -//================================= Buffers ================================= -//=========================================================================== - -// @section hidden - -// The number of linear motions that can be in the plan at any give time. -// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else - #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif - -// @section serial - -// The ASCII buffer for serial input -#define MAX_CMD_SIZE 96 -#define BUFSIZE 4 - -// Transmission to Host Buffer Size -// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. -// To buffer a simple "ok" you need 4 bytes. -// For ADVANCED_OK (M105) you need 32 bytes. -// For debug-echo: 128 bytes for the optimal speed. -// Other output doesn't need to be that speedy. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256] -#define TX_BUFFER_SIZE 0 - -// Host Receive Buffer Size -// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. -// To use flow control, set this buffer size to at least 1024 bytes. -// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] -//#define RX_BUFFER_SIZE 1024 - -#if RX_BUFFER_SIZE >= 1024 - // Enable to have the controller send XON/XOFF control characters to - // the host to signal the RX buffer is becoming full. - //#define SERIAL_XON_XOFF -#endif - -// Add M575 G-code to change the baud rate -//#define BAUD_RATE_GCODE - -#if ENABLED(SDSUPPORT) - // Enable this option to collect and display the maximum - // RX queue usage after transferring a file to SD. - //#define SERIAL_STATS_MAX_RX_QUEUED - - // Enable this option to collect and display the number - // of dropped bytes after a file transfer to SD. - //#define SERIAL_STATS_DROPPED_RX -#endif - -// Enable an emergency-command parser to intercept certain commands as they -// enter the serial receive buffer, so they cannot be blocked. -// Currently handles M108, M112, M410 -// Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER - -// Bad Serial-connections can miss a received command by sending an 'ok' -// Therefore some clients abort after 30 seconds in a timeout. -// Some other clients start sending commands while receiving a 'wait'. -// This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds - -// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - -// Printrun may have trouble receiving long strings all at once. -// This option inserts short delays between lines of serial output. -#define SERIAL_OVERRUN_PROTECTION - -// @section extras - -/** - * Extra Fan Speed - * Adds a secondary fan speed for each print-cooling fan. - * 'M106 P T3-255' : Set a secondary speed for - * 'M106 P T2' : Use the set secondary speed - * 'M106 P T1' : Restore the previous fan speed - */ -//#define EXTRA_FAN_SPEED - -/** - * Firmware-based and LCD-controlled retract - * - * Add G10 / G11 commands for automatic firmware-based retract / recover. - * Use M207 and M208 to define parameters for retract / recover. - * - * Use M209 to enable or disable auto-retract. - * With auto-retract enabled, all G1 E moves within the set range - * will be converted to firmware-based retract/recover moves. - * - * Be sure to turn off auto-retract during filament change. - * - * Note that M207 / M208 / M209 settings are saved to EEPROM. - * - */ -//#define FWRETRACT -#if ENABLED(FWRETRACT) - #define FWRETRACT_AUTORETRACT // Override slicer retractions - #if ENABLED(FWRETRACT_AUTORETRACT) - #define MIN_AUTORETRACT 0.1 // (mm) Don't convert E moves under this length - #define MAX_AUTORETRACT 10.0 // (mm) Don't convert E moves over this length - #endif - #define RETRACT_LENGTH 3 // (mm) Default retract length (positive value) - #define RETRACT_LENGTH_SWAP 13 // (mm) Default swap retract length (positive value) - #define RETRACT_FEEDRATE 45 // (mm/s) Default feedrate for retracting - #define RETRACT_ZRAISE 0 // (mm) Default retract Z-raise - #define RETRACT_RECOVER_LENGTH 0 // (mm) Default additional recover length (added to retract length on recover) - #define RETRACT_RECOVER_LENGTH_SWAP 0 // (mm) Default additional swap recover length (added to retract length on recover from toolchange) - #define RETRACT_RECOVER_FEEDRATE 8 // (mm/s) Default feedrate for recovering from retraction - #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // (mm/s) Default feedrate for recovering from swap retraction - #if ENABLED(MIXING_EXTRUDER) - //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously - #endif -#endif - -/** - * Universal tool change settings. - * Applies to all types of extruders except where explicitly noted. - */ -#if EXTRUDERS > 1 - // Z raise distance for tool-change, as needed for some extruders - #define TOOLCHANGE_ZRAISE 2 // (mm) - //#define TOOLCHANGE_NO_RETURN // Never return to the previous position on tool-change - - // Retract and prime filament on tool-change - //#define TOOLCHANGE_FILAMENT_SWAP - #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) - #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm) - #define TOOLCHANGE_FIL_EXTRA_PRIME 2 // (mm) - #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m) - #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m) - #endif - - /** - * Position to park head during tool change. - * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER - */ - //#define TOOLCHANGE_PARK - #if ENABLED(TOOLCHANGE_PARK) - #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 } - #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m) - #endif -#endif - -/** - * Advanced Pause - * Experimental feature for filament change support and for parking the nozzle when paused. - * Adds the GCode M600 for initiating filament change. - * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. - * - * Requires an LCD display. - * Requires NOZZLE_PARK_FEATURE. - * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. - */ -//#define ADVANCED_PAUSE_FEATURE -#if ENABLED(ADVANCED_PAUSE_FEATURE) - #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. - // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - // Set to 0 for manual unloading. - #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. - #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. - // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. - #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. - // For Bowden, the full length of the tube and nozzle. - // For direct drive, the full length of the nozzle. - //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. - #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. - // Set to 0 for manual extrusion. - // Filament can be extruded repeatedly from the Filament Change menu - // until extrusion is consistent, and to purge old filament. - #define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park. - //#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused. - - // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length. - #define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - #define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload - - #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. - #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change - - //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. - //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) -#endif - -// @section tmc - -/** - * TMC26X Stepper Driver options - * - * The TMC26XStepper library is required for this stepper driver. - * https://github.com/trinamic/TMC26XStepper - */ -#if HAS_DRIVER(TMC26X) - - #if AXIS_DRIVER_TYPE_X(TMC26X) - #define X_MAX_CURRENT 1000 // (mA) - #define X_SENSE_RESISTOR 91 // (mOhms) - #define X_MICROSTEPS 16 // Number of microsteps - #endif - - #if AXIS_DRIVER_TYPE_X2(TMC26X) - #define X2_MAX_CURRENT 1000 - #define X2_SENSE_RESISTOR 91 - #define X2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y(TMC26X) - #define Y_MAX_CURRENT 1000 - #define Y_SENSE_RESISTOR 91 - #define Y_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Y2(TMC26X) - #define Y2_MAX_CURRENT 1000 - #define Y2_SENSE_RESISTOR 91 - #define Y2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z(TMC26X) - #define Z_MAX_CURRENT 1000 - #define Z_SENSE_RESISTOR 91 - #define Z_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z2(TMC26X) - #define Z2_MAX_CURRENT 1000 - #define Z2_SENSE_RESISTOR 91 - #define Z2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_Z3(TMC26X) - #define Z3_MAX_CURRENT 1000 - #define Z3_SENSE_RESISTOR 91 - #define Z3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E0(TMC26X) - #define E0_MAX_CURRENT 1000 - #define E0_SENSE_RESISTOR 91 - #define E0_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E1(TMC26X) - #define E1_MAX_CURRENT 1000 - #define E1_SENSE_RESISTOR 91 - #define E1_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E2(TMC26X) - #define E2_MAX_CURRENT 1000 - #define E2_SENSE_RESISTOR 91 - #define E2_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E3(TMC26X) - #define E3_MAX_CURRENT 1000 - #define E3_SENSE_RESISTOR 91 - #define E3_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E4(TMC26X) - #define E4_MAX_CURRENT 1000 - #define E4_SENSE_RESISTOR 91 - #define E4_MICROSTEPS 16 - #endif - - #if AXIS_DRIVER_TYPE_E5(TMC26X) - #define E5_MAX_CURRENT 1000 - #define E5_SENSE_RESISTOR 91 - #define E5_MICROSTEPS 16 - #endif - -#endif // TMC26X - -// @section tmc_smart - -/** - * To use TMC2130, TMC2160, TMC2660, TMC5130, TMC5160 stepper drivers in SPI mode - * connect your SPI pins to the hardware SPI interface on your board and define - * the required CS pins in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 - * pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). - * You may also use software SPI if you wish to use general purpose IO pins. - * - * To use TMC2208 stepper UART-configurable stepper drivers connect #_SERIAL_TX_PIN - * to the driver side PDN_UART pin with a 1K resistor. - * To use the reading capabilities, also connect #_SERIAL_RX_PIN to PDN_UART without - * a resistor. - * The drivers can also be used with hardware serial. - * - * TMCStepper library is required to use TMC stepper drivers. - * https://github.com/teemuatlut/TMCStepper - */ -#if HAS_TRINAMIC - - #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current - #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 - - #if AXIS_IS_TMC(X) - #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. - #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 - #define X_RSENSE 0.11 - #define X_CHAIN_POS -1 // <=0 : Not chained. 1 : MCU MOSI connected. 2 : Next in chain, ... - #endif - - #if AXIS_IS_TMC(X2) - #define X2_CURRENT 800 - #define X2_CURRENT_HOME X2_CURRENT - #define X2_MICROSTEPS 16 - #define X2_RSENSE 0.11 - #define X2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y) - #define Y_CURRENT 800 - #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 - #define Y_RSENSE 0.11 - #define Y_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Y2) - #define Y2_CURRENT 800 - #define Y2_CURRENT_HOME Y2_CURRENT - #define Y2_MICROSTEPS 16 - #define Y2_RSENSE 0.11 - #define Y2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z) - #define Z_CURRENT 800 - #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 - #define Z_RSENSE 0.11 - #define Z_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z2) - #define Z2_CURRENT 800 - #define Z2_CURRENT_HOME Z2_CURRENT - #define Z2_MICROSTEPS 16 - #define Z2_RSENSE 0.11 - #define Z2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(Z3) - #define Z3_CURRENT 800 - #define Z3_CURRENT_HOME Z3_CURRENT - #define Z3_MICROSTEPS 16 - #define Z3_RSENSE 0.11 - #define Z3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E0) - #define E0_CURRENT 800 - #define E0_MICROSTEPS 16 - #define E0_RSENSE 0.11 - #define E0_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E1) - #define E1_CURRENT 800 - #define E1_MICROSTEPS 16 - #define E1_RSENSE 0.11 - #define E1_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E2) - #define E2_CURRENT 800 - #define E2_MICROSTEPS 16 - #define E2_RSENSE 0.11 - #define E2_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E3) - #define E3_CURRENT 800 - #define E3_MICROSTEPS 16 - #define E3_RSENSE 0.11 - #define E3_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E4) - #define E4_CURRENT 800 - #define E4_MICROSTEPS 16 - #define E4_RSENSE 0.11 - #define E4_CHAIN_POS -1 - #endif - - #if AXIS_IS_TMC(E5) - #define E5_CURRENT 800 - #define E5_MICROSTEPS 16 - #define E5_RSENSE 0.11 - #define E5_CHAIN_POS -1 - #endif - - /** - * Override default SPI pins for TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160 drivers here. - * The default pins can be found in your board's pins file. - */ - //#define X_CS_PIN -1 - //#define Y_CS_PIN -1 - //#define Z_CS_PIN -1 - //#define X2_CS_PIN -1 - //#define Y2_CS_PIN -1 - //#define Z2_CS_PIN -1 - //#define Z3_CS_PIN -1 - //#define E0_CS_PIN -1 - //#define E1_CS_PIN -1 - //#define E2_CS_PIN -1 - //#define E3_CS_PIN -1 - //#define E4_CS_PIN -1 - //#define E5_CS_PIN -1 - - /** - * Software option for SPI driven drivers (TMC2130, TMC2160, TMC2660, TMC5130 and TMC5160). - * The default SW SPI pins are defined the respective pins files, - * but you can override or define them here. - */ - //#define TMC_USE_SW_SPI - //#define TMC_SW_MOSI -1 - //#define TMC_SW_MISO -1 - //#define TMC_SW_SCK -1 - - /** - * Four TMC2209 drivers can use the same HW/SW serial port with hardware configured addresses. - * Set the address using jumpers on pins MS1 and MS2. - * Address | MS1 | MS2 - * 0 | LOW | LOW - * 1 | HIGH | LOW - * 2 | LOW | HIGH - * 3 | HIGH | HIGH - * - * Set *_SERIAL_TX_PIN and *_SERIAL_RX_PIN to match for all drivers - * on the same serial port, either here or in your board's pins file. - */ - #define X_SLAVE_ADDRESS 0 - #define Y_SLAVE_ADDRESS 0 - #define Z_SLAVE_ADDRESS 0 - #define X2_SLAVE_ADDRESS 0 - #define Y2_SLAVE_ADDRESS 0 - #define Z2_SLAVE_ADDRESS 0 - #define Z3_SLAVE_ADDRESS 0 - #define E0_SLAVE_ADDRESS 0 - #define E1_SLAVE_ADDRESS 0 - #define E2_SLAVE_ADDRESS 0 - #define E3_SLAVE_ADDRESS 0 - #define E4_SLAVE_ADDRESS 0 - #define E5_SLAVE_ADDRESS 0 - - /** - * Software enable - * - * Use for drivers that do not use a dedicated enable pin, but rather handle the same - * function through a communication line such as SPI or UART. - */ - //#define SOFTWARE_DRIVER_ENABLE - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * Use Trinamic's ultra quiet stepping mode. - * When disabled, Marlin will use spreadCycle stepping mode. - */ - #define STEALTHCHOP_XY - #define STEALTHCHOP_Z - #define STEALTHCHOP_E - - /** - * Optimize spreadCycle chopper parameters by using predefined parameter sets - * or with the help of an example included in the library. - * Provided parameter sets are - * CHOPPER_DEFAULT_12V - * CHOPPER_DEFAULT_19V - * CHOPPER_DEFAULT_24V - * CHOPPER_DEFAULT_36V - * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V) - * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9 - * - * Define you own with - * { , , hysteresis_start[1..8] } - */ - #define CHOPPER_TIMING CHOPPER_DEFAULT_12V - - /** - * Monitor Trinamic drivers for error conditions, - * like overtemperature and short to ground. - * In the case of overtemperature Marlin can decrease the driver current until error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. - * M911 - Report stepper driver overtemperature pre-warn condition. - * M912 - Clear stepper driver overtemperature pre-warn condition flag. - * M122 - Report driver parameters (Requires TMC_DEBUG) - */ - //#define MONITOR_DRIVER_STATUS - - #if ENABLED(MONITOR_DRIVER_STATUS) - #define CURRENT_STEP_DOWN 50 // [mA] - #define REPORT_CURRENT_CHANGE - #define STOP_ON_ERROR - #endif - - /** - * TMC2130, TMC2160, TMC2208, TMC2209, TMC5130 and TMC5160 only - * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. - * This mode allows for faster movements at the expense of higher noise levels. - * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD. - * M913 X/Y/Z/E to live tune the setting - */ - //#define HYBRID_THRESHOLD - - #define X_HYBRID_THRESHOLD 100 // [mm/s] - #define X2_HYBRID_THRESHOLD 100 - #define Y_HYBRID_THRESHOLD 100 - #define Y2_HYBRID_THRESHOLD 100 - #define Z_HYBRID_THRESHOLD 3 - #define Z2_HYBRID_THRESHOLD 3 - #define Z3_HYBRID_THRESHOLD 3 - #define E0_HYBRID_THRESHOLD 30 - #define E1_HYBRID_THRESHOLD 30 - #define E2_HYBRID_THRESHOLD 30 - #define E3_HYBRID_THRESHOLD 30 - #define E4_HYBRID_THRESHOLD 30 - #define E5_HYBRID_THRESHOLD 30 - - /** - * Use StallGuard2 to home / probe X, Y, Z. - * - * TMC2130, TMC2160, TMC2209, TMC2660, TMC5130, and TMC5160 only - * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin. - * X, Y, and Z homing will always be done in spreadCycle mode. - * - * X/Y/Z_STALL_SENSITIVITY is the default stall threshold. - * Use M914 X Y Z to set the stall threshold at runtime: - * - * Sensitivity TMC2209 Others - * HIGHEST 255 -64 (Too sensitive => False positive) - * LOWEST 0 63 (Too insensitive => No trigger) - * - * It is recommended to set [XYZ]_HOME_BUMP_MM to 0. - * - * SPI_ENDSTOPS *** Beta feature! *** TMC2130 Only *** - * Poll the driver through SPI to determine load when homing. - * Removes the need for a wire from DIAG1 to an endstop pin. - * - * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when - * homing and adds a guard period for endstop triggering. - */ - //#define SENSORLESS_HOMING // StallGuard capable drivers only - - /** - * Use StallGuard2 to probe the bed with the nozzle. - * - * CAUTION: This could cause damage to machines that use a lead screw or threaded rod - * to move the Z axis. Take extreme care when attempting to enable this feature. - */ - //#define SENSORLESS_PROBING // StallGuard capable drivers only - - #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) - // TMC2209: 0...255. TMC2130: -64...63 - #define X_STALL_SENSITIVITY 8 - #define X2_STALL_SENSITIVITY X_STALL_SENSITIVITY - #define Y_STALL_SENSITIVITY 8 - //#define Z_STALL_SENSITIVITY 8 - //#define SPI_ENDSTOPS // TMC2130 only - //#define IMPROVE_HOMING_RELIABILITY - #endif - - /** - * Beta feature! - * Create a 50/50 square wave step pulse optimal for stepper drivers. - */ - //#define SQUARE_WAVE_STEPPING - - /** - * Enable M122 debugging command for TMC stepper drivers. - * M122 S0/1 will enable continous reporting. - */ - //#define TMC_DEBUG - - /** - * You can set your own advanced settings by filling in predefined functions. - * A list of available functions can be found on the library github page - * https://github.com/teemuatlut/TMCStepper - * - * Example: - * #define TMC_ADV() { \ - * stepperX.diag0_otpw(1); \ - * stepperY.intpol(0); \ - * } - */ - #define TMC_ADV() { } - -#endif // HAS_TRINAMIC - -// @section L64XX - -/** - * L64XX Stepper Driver options - * - * Arduino-L6470 library (0.8.0 or higher) is required. - * https://github.com/ameyer/Arduino-L6470 - * - * Requires the following to be defined in your pins_YOUR_BOARD file - * L6470_CHAIN_SCK_PIN - * L6470_CHAIN_MISO_PIN - * L6470_CHAIN_MOSI_PIN - * L6470_CHAIN_SS_PIN - * ENABLE_RESET_L64XX_CHIPS(Q) where Q is 1 to enable and 0 to reset - */ - -#if HAS_L64XX - - //#define L6470_CHITCHAT // Display additional status info - - #if AXIS_IS_L64XX(X) - #define X_MICROSTEPS 128 // Number of microsteps (VALID: 1, 2, 4, 8, 16, 32, 128) - L6474 max is 16 - #define X_OVERCURRENT 2000 // (mA) Current where the driver detects an over current - // L6470 & L6474 - VALID: 375 x (1 - 16) - 6A max - rounds down - // POWERSTEP01: VALID: 1000 x (1 - 32) - 32A max - rounds down - #define X_STALLCURRENT 1500 // (mA) Current where the driver detects a stall (VALID: 31.25 * (1-128) - 4A max - rounds down) - // L6470 & L6474 - VALID: 31.25 * (1-128) - 4A max - rounds down - // POWERSTEP01: VALID: 200 x (1 - 32) - 6.4A max - rounds down - // L6474 - STALLCURRENT setting is used to set the nominal (TVAL) current - #define X_MAX_VOLTAGE 127 // 0-255, Maximum effective voltage seen by stepper - not used by L6474 - #define X_CHAIN_POS -1 // Position in SPI chain, 0=Not in chain, 1=Nearest MOSI - #define X_SLEW_RATE 1 // 0-3, Slew 0 is slowest, 3 is fastest - #endif - - #if AXIS_IS_L64XX(X2) - #define X2_MICROSTEPS 128 - #define X2_OVERCURRENT 2000 - #define X2_STALLCURRENT 1500 - #define X2_MAX_VOLTAGE 127 - #define X2_CHAIN_POS -1 - #define X2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y) - #define Y_MICROSTEPS 128 - #define Y_OVERCURRENT 2000 - #define Y_STALLCURRENT 1500 - #define Y_MAX_VOLTAGE 127 - #define Y_CHAIN_POS -1 - #define Y_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Y2) - #define Y2_MICROSTEPS 128 - #define Y2_OVERCURRENT 2000 - #define Y2_STALLCURRENT 1500 - #define Y2_MAX_VOLTAGE 127 - #define Y2_CHAIN_POS -1 - #define Y2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z) - #define Z_MICROSTEPS 128 - #define Z_OVERCURRENT 2000 - #define Z_STALLCURRENT 1500 - #define Z_MAX_VOLTAGE 127 - #define Z_CHAIN_POS -1 - #define Z_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z2) - #define Z2_MICROSTEPS 128 - #define Z2_OVERCURRENT 2000 - #define Z2_STALLCURRENT 1500 - #define Z2_MAX_VOLTAGE 127 - #define Z2_CHAIN_POS -1 - #define Z2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(Z3) - #define Z3_MICROSTEPS 128 - #define Z3_OVERCURRENT 2000 - #define Z3_STALLCURRENT 1500 - #define Z3_MAX_VOLTAGE 127 - #define Z3_CHAIN_POS -1 - #define Z3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E0) - #define E0_MICROSTEPS 128 - #define E0_OVERCURRENT 2000 - #define E0_STALLCURRENT 1500 - #define E0_MAX_VOLTAGE 127 - #define E0_CHAIN_POS -1 - #define E0_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E1) - #define E1_MICROSTEPS 128 - #define E1_OVERCURRENT 2000 - #define E1_STALLCURRENT 1500 - #define E1_MAX_VOLTAGE 127 - #define E1_CHAIN_POS -1 - #define E1_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E2) - #define E2_MICROSTEPS 128 - #define E2_OVERCURRENT 2000 - #define E2_STALLCURRENT 1500 - #define E2_MAX_VOLTAGE 127 - #define E2_CHAIN_POS -1 - #define E2_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E3) - #define E3_MICROSTEPS 128 - #define E3_OVERCURRENT 2000 - #define E3_STALLCURRENT 1500 - #define E3_MAX_VOLTAGE 127 - #define E3_CHAIN_POS -1 - #define E3_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E4) - #define E4_MICROSTEPS 128 - #define E4_OVERCURRENT 2000 - #define E4_STALLCURRENT 1500 - #define E4_MAX_VOLTAGE 127 - #define E4_CHAIN_POS -1 - #define E4_SLEW_RATE 1 - #endif - - #if AXIS_IS_L64XX(E5) - #define E5_MICROSTEPS 128 - #define E5_OVERCURRENT 2000 - #define E5_STALLCURRENT 1500 - #define E5_MAX_VOLTAGE 127 - #define E5_CHAIN_POS -1 - #define E5_SLEW_RATE 1 - #endif - - /** - * Monitor L6470 drivers for error conditions like over temperature and over current. - * In the case of over temperature Marlin can decrease the drive until the error condition clears. - * Other detected conditions can be used to stop the current print. - * Relevant g-codes: - * M906 - I1/2/3/4/5 Set or get motor drive level using axis codes X, Y, Z, E. Report values if no axis codes given. - * I not present or I0 or I1 - X, Y, Z or E0 - * I2 - X2, Y2, Z2 or E1 - * I3 - Z3 or E3 - * I4 - E4 - * I5 - E5 - * M916 - Increase drive level until get thermal warning - * M917 - Find minimum current thresholds - * M918 - Increase speed until max or error - * M122 S0/1 - Report driver parameters - */ - //#define MONITOR_L6470_DRIVER_STATUS - - #if ENABLED(MONITOR_L6470_DRIVER_STATUS) - #define KVAL_HOLD_STEP_DOWN 1 - //#define L6470_STOP_ON_ERROR - #endif - -#endif // HAS_L64XX - -/** - * TWI/I2C BUS - * - * This feature is an EXPERIMENTAL feature so it shall not be used on production - * machines. Enabling this will allow you to send and receive I2C data from slave - * devices on the bus. - * - * ; Example #1 - * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) - * ; It uses multiple M260 commands with one B arg - * M260 A99 ; Target slave address - * M260 B77 ; M - * M260 B97 ; a - * M260 B114 ; r - * M260 B108 ; l - * M260 B105 ; i - * M260 B110 ; n - * M260 S1 ; Send the current buffer - * - * ; Example #2 - * ; Request 6 bytes from slave device with address 0x63 (99) - * M261 A99 B5 - * - * ; Example #3 - * ; Example serial output of a M261 request - * echo:i2c-reply: from:99 bytes:5 data:hello - */ - -// @section i2cbus - -//#define EXPERIMENTAL_I2CBUS -#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave - -// @section extras - -/** - * Photo G-code - * Add the M240 G-code to take a photo. - * The photo can be triggered by a digital pin or a physical movement. - */ -//#define PHOTO_GCODE -#if ENABLED(PHOTO_GCODE) - // A position to move to (and raise Z) before taking the photo - //#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z) - //#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P) - //#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S) - - // Canon RC-1 or homebrew digital camera trigger - // Data from: http://www.doc-diy.net/photo/rc-1_hacked/ - //#define PHOTOGRAPH_PIN 23 - - // Canon Hack Development Kit - // http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ - //#define CHDK_PIN 4 - - // Optional second move with delay to trigger the camera shutter - //#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J) - - // Duration to hold the switch or keep CHDK_PIN high - //#define PHOTO_SWITCH_MS 50 // (ms) (M240 D) -#endif - -/** - * Spindle & Laser control - * - * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and - * to set spindle speed, spindle direction, and laser power. - * - * SuperPid is a router/spindle speed controller used in the CNC milling community. - * Marlin can be used to turn the spindle on and off. It can also be used to set - * the spindle speed from 5,000 to 30,000 RPM. - * - * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V - * hardware PWM pin for the speed control and a pin for the rotation direction. - * - * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. - */ -//#define SPINDLE_FEATURE -//#define LASER_FEATURE -#if EITHER(SPINDLE_FEATURE, LASER_FEATURE) - #define SPINDLE_LASER_ACTIVE_HIGH false // Set to "true" if the on/off function is active HIGH - #define SPINDLE_LASER_PWM true // Set to "true" if your controller supports setting the speed/power - #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower - #define SPINDLE_LASER_POWERUP_DELAY 5000 // (ms) Delay to allow the spindle/laser to come up to speed/power - #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop - - #if ENABLED(SPINDLE_FEATURE) - //#define SPINDLE_CHANGE_DIR // Enable if your spindle controller can change spindle direction - #define SPINDLE_CHANGE_DIR_STOP // Enable if the spindle should stop before changing spin direction - #define SPINDLE_INVERT_DIR false // Set to "true" if the spin direction is reversed - - /** - * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power - * - * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT - * where PWM duty cycle varies from 0 to 255 - * - * set the following for your controller (ALL MUST BE SET) - */ - #define SPEED_POWER_SLOPE 118.4 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 5000 - #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM - #else - #define SPEED_POWER_SLOPE 0.3922 - #define SPEED_POWER_INTERCEPT 0 - #define SPEED_POWER_MIN 10 - #define SPEED_POWER_MAX 100 // 0-100% - #endif -#endif - -/** - * Coolant Control - * - * Add the M7, M8, and M9 commands to turn mist or flood coolant on and off. - * - * Note: COOLANT_MIST_PIN and/or COOLANT_FLOOD_PIN must also be defined. - */ -//#define COOLANT_CONTROL -#if ENABLED(COOLANT_CONTROL) - #define COOLANT_MIST // Enable if mist coolant is present - #define COOLANT_FLOOD // Enable if flood coolant is present - #define COOLANT_MIST_INVERT false // Set "true" if the on/off function is reversed - #define COOLANT_FLOOD_INVERT false // Set "true" if the on/off function is reversed -#endif - -/** - * Filament Width Sensor - * - * Measures the filament width in real-time and adjusts - * flow rate to compensate for any irregularities. - * - * Also allows the measured filament diameter to set the - * extrusion rate, so the slicer only has to specify the - * volume. - * - * Only a single extruder is supported at this time. - * - * 34 RAMPS_14 : Analog input 5 on the AUX2 connector - * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) - * 301 RAMBO : Analog input 3 - * - * Note: May require analog pins to be defined for other boards. - */ -//#define FILAMENT_WIDTH_SENSOR - -#if ENABLED(FILAMENT_WIDTH_SENSOR) - #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] - #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber - - #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it - #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. - - #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially - - // Display filament width on the LCD status line. Status messages will expire after 5 seconds. - //#define FILAMENT_LCD_DISPLAY -#endif - -/** - * CNC Coordinate Systems - * - * Enables G53 and G54-G59.3 commands to select coordinate systems - * and G92.1 to reset the workspace to native machine space. - */ -//#define CNC_COORDINATE_SYSTEMS - -/** - * Auto-report temperatures with M155 S - */ -#define AUTO_REPORT_TEMPERATURES - -/** - * Include capabilities in M115 output - */ -#define EXTENDED_CAPABILITIES_REPORT - -/** - * Expected Printer Check - * Add the M16 G-code to compare a string to the MACHINE_NAME. - * M16 with a non-matching string causes the printer to halt. - */ -//#define EXPECTED_PRINTER_CHECK - -/** - * Disable all Volumetric extrusion options - */ -//#define NO_VOLUMETRICS - -#if DISABLED(NO_VOLUMETRICS) - /** - * Volumetric extrusion default state - * Activate to make volumetric extrusion the default method, - * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. - * - * M200 D0 to disable, M200 Dn to set a new diameter. - */ - //#define VOLUMETRIC_DEFAULT_ON -#endif - -/** - * Enable this option for a leaner build of Marlin that removes all - * workspace offsets, simplifying coordinate transformations, leveling, etc. - * - * - M206 and M428 are disabled. - * - G92 will revert to its behavior from Marlin 1.0. - */ -//#define NO_WORKSPACE_OFFSETS - -/** - * Set the number of proportional font spaces required to fill up a typical character space. - * This can help to better align the output of commands like `G29 O` Mesh Output. - * - * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. - * Otherwise, adjust according to your client and font. - */ -#define PROPORTIONAL_FONT_RATIO 1.0 - -/** - * Spend 28 bytes of SRAM to optimize the GCode parser - */ -#define FASTER_GCODE_PARSER - -/** - * CNC G-code options - * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc. - * Note that G0 feedrates should be used with care for 3D printing (if used at all). - * High feedrates may cause ringing and harm print quality. - */ -//#define PAREN_COMMENTS // Support for parentheses-delimited comments -//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc. - -// Enable and set a (default) feedrate for all G0 moves -//#define G0_FEEDRATE 3000 // (mm/m) -#ifdef G0_FEEDRATE - //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode -#endif - -/** - * Startup commands - * - * Execute certain G-code commands immediately after power-on. - */ -//#define STARTUP_COMMANDS "M17 Z" - -/** - * G-code Macros - * - * Add G-codes M810-M819 to define and run G-code macros. - * Macros are not saved to EEPROM. - */ -//#define GCODE_MACROS -#if ENABLED(GCODE_MACROS) - #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used - #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro -#endif - -/** - * User-defined menu items that execute custom GCode - */ -//#define CUSTOM_USER_MENUS -#if ENABLED(CUSTOM_USER_MENUS) - //#define CUSTOM_USER_MENU_TITLE "Custom Commands" - #define USER_SCRIPT_DONE "M117 User Script Done" - #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script - - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" - - #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) - - #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) - - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" - - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" -#endif - -/** - * Host Action Commands - * - * Define host streamer action commands in compliance with the standard. - * - * See https://reprap.org/wiki/G-code#Action_commands - * Common commands ........ poweroff, pause, paused, resume, resumed, cancel - * G29_RETRY_AND_RECOVER .. probe_rewipe, probe_failed - * - * Some features add reason codes to extend these commands. - * - * Host Prompt Support enables Marlin to use the host for user prompts so - * filament runout and other processes can be managed from the host side. - */ -//#define HOST_ACTION_COMMANDS -#if ENABLED(HOST_ACTION_COMMANDS) - //#define HOST_PROMPT_SUPPORT -#endif - -/** - * Cancel Objects - * - * Implement M486 to allow Marlin to skip objects - */ -//#define CANCEL_OBJECTS - -/** - * I2C position encoders for closed loop control. - * Developed by Chris Barr at Aus3D. - * - * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder - * Github: https://github.com/Aus3D/MagneticEncoder - * - * Supplier: http://aus3d.com.au/magnetic-encoder-module - * Alternative Supplier: http://reliabuild3d.com/ - * - * Reliabuild encoders have been modified to improve reliability. - */ - -//#define I2C_POSITION_ENCODERS -#if ENABLED(I2C_POSITION_ENCODERS) - - #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 - // encoders supported currently. - - #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. - #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. - #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- - // I2CPE_ENC_TYPE_ROTARY. - #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for - // 1mm poles. For linear encoders this is ticks / mm, - // for rotary encoders this is ticks / revolution. - //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper - // steps per full revolution (motor steps/rev * microstepping) - //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. - #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. - #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the - // printer will attempt to correct the error; errors - // smaller than this are ignored to minimize effects of - // measurement noise / latency (filter). - - #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. - #define I2CPE_ENC_2_AXIS Y_AXIS - #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_ENC_2_TICKS_UNIT 2048 - //#define I2CPE_ENC_2_TICKS_REV (16 * 200) - //#define I2CPE_ENC_2_INVERT - #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP - #define I2CPE_ENC_2_EC_THRESH 0.10 - - #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options - #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. - - #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. - #define I2CPE_ENC_4_AXIS E_AXIS - - #define I2CPE_ENC_5_ADDR 34 // Encoder 5. - #define I2CPE_ENC_5_AXIS E_AXIS - - // Default settings for encoders which are enabled, but without settings configured above. - #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR - #define I2CPE_DEF_ENC_TICKS_UNIT 2048 - #define I2CPE_DEF_TICKS_REV (16 * 200) - #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE - #define I2CPE_DEF_EC_THRESH 0.1 - - //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given - // axis after which the printer will abort. Comment out to - // disable abort behavior. - - #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault - // for this amount of time (in ms) before the encoder - // is trusted again. - - /** - * Position is checked every time a new command is executed from the buffer but during long moves, - * this setting determines the minimum update time between checks. A value of 100 works well with - * error rolling average when attempting to correct only for skips and not for vibration. - */ - #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. - - // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. - #define I2CPE_ERR_ROLLING_AVERAGE - -#endif // I2C_POSITION_ENCODERS - -/** - * Analog Joystick(s) - */ -//#define JOYSTICK -#if ENABLED(JOYSTICK) - #define JOY_X_PIN 5 // RAMPS: Suggested pin A5 on AUX2 - #define JOY_Y_PIN 10 // RAMPS: Suggested pin A10 on AUX2 - #define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2 - #define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2 - - //#define INVERT_JOY_X // Enable if X direction is reversed - //#define INVERT_JOY_Y // Enable if Y direction is reversed - //#define INVERT_JOY_Z // Enable if Z direction is reversed - - // Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting: - #define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max - #define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 } - #define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 } -#endif - -/** - * MAX7219 Debug Matrix - * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. - * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - */ -//#define MAX7219_DEBUG -#if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 - #define MAX7219_DIN_PIN 57 - #define MAX7219_LOAD_PIN 44 - - //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix - #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) - #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. - #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) - // connector at: right=0 bottom=-90 top=90 left=180 - //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order - //#define MAX7219_SIDE_BY_SIDE // Big chip+matrix boards can be chained side-by-side - - /** - * Sample debug features - * If you add more debug displays, be careful to avoid conflicts! - */ - #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - - #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row - // If you experience stuttering, reboots, etc. this option can reveal how - // tweaks made to the configuration are affecting the printer in real-time. -#endif - -/** - * NanoDLP Sync support - * - * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" - * string to enable synchronization with DLP projector exposure. This change will allow to use - * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands - */ -//#define NANODLP_Z_SYNC -#if ENABLED(NANODLP_Z_SYNC) - //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. - // Default behavior is limited to Z axis only. -#endif - -/** - * WiFi Support (Espressif ESP32 WiFi) - */ -//#define WIFISUPPORT // Marlin embedded WiFi managenent -//#define ESP3D_WIFISUPPORT // ESP3D Library WiFi management (https://github.com/luc-github/ESP3DLib) - -#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT) - #define WIFI_SSID "Wifi SSID" - #define WIFI_PWD "Wifi Password" - //#define WEBSUPPORT // Start a webserver (which may include auto-discovery) - //#define OTASUPPORT // Support over-the-air firmware updates - //#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host -#endif - -/** - * Prusa Multi-Material Unit v2 - * Enable in Configuration.h - */ -#if ENABLED(PRUSA_MMU2) - - // Serial port used for communication with MMU2. - // For AVR enable the UART port used for the MMU. (e.g., internalSerial) - // For 32-bit boards check your HAL for available serial ports. (e.g., Serial2) - #define INTERNAL_SERIAL_PORT 2 - #define MMU2_SERIAL internalSerial - - // Use hardware reset for MMU if a pin is defined for it - //#define MMU2_RST_PIN 23 - - // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up) - //#define MMU2_MODE_12V - - // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout - #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600" - - // Add an LCD menu for MMU2 - //#define MMU2_MENUS - #if ENABLED(MMU2_MENUS) - // Settings for filament load / unload from the LCD menu. - // This is for Prusa MK3-style extruders. Customize for your hardware. - #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0 - #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \ - { 7.2, 562 }, \ - { 14.4, 871 }, \ - { 36.0, 1393 }, \ - { 14.4, 871 }, \ - { 50.0, 198 } - - #define MMU2_RAMMING_SEQUENCE \ - { 1.0, 1000 }, \ - { 1.0, 1500 }, \ - { 2.0, 2000 }, \ - { 1.5, 3000 }, \ - { 2.5, 4000 }, \ - { -15.0, 5000 }, \ - { -14.0, 1200 }, \ - { -6.0, 600 }, \ - { 10.0, 700 }, \ - { -10.0, 400 }, \ - { -50.0, 2000 } - - #endif - - //#define MMU2_DEBUG // Write debug info to serial output - -#endif // PRUSA_MMU2 - -/** - * Advanced Print Counter settings - */ -#if ENABLED(PRINTCOUNTER) - #define SERVICE_WARNING_BUZZES 3 - // Activate up to 3 service interval watchdogs - //#define SERVICE_NAME_1 "Service S" - //#define SERVICE_INTERVAL_1 100 // print hours - //#define SERVICE_NAME_2 "Service L" - //#define SERVICE_INTERVAL_2 200 // print hours - //#define SERVICE_NAME_3 "Service 3" - //#define SERVICE_INTERVAL_3 1 // print hours -#endif - -// @section develop - -/** - * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins - */ -//#define PINS_DEBUGGING - -// Enable Marlin dev mode which adds some special commands -//#define MARLIN_DEV_MODE